After update apple tv 2 on itunes and get error 1602 i start my apple tv and see no contents or any programs there just i see settings and computers?
after update my apple tv 2 and get error 1602 on itunes, i start it and found no content showing there only settings and computers?
please any answer.
my itunes is the latest.
Welcome to the Apple Community.
Unfortunately, a number of users appear to have encountered this problem. Some of these users have reported that the problem just disappears the following day or shortly after. Other users have found various other solutions to this problem.
Firstly, are you receiving any date and time errors when you turn on your Apple TV?
Check that you are properly connected to the Internet, by ensuring that you have a proper IP address and not one starting with 169. Also check that your location for the iTunes Store is set correctly, if so you might try changing it and then changing it back.
If the problem persists try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router, or if this doesn't work you might like to try a restore.
Similar Messages
-
just updated to the latest version of itunes for windows. i can't stream any of my radio stations and when i try to connect to the itunes store i get an error -3212 message saying i'm not connect to the internet, yet my browser works and my wireless status is ok.
I also had this issue when one day itunes stopped working for me on windows 8...
the error message I received first was: C:Programme files\common files\Apple\Apple Push service.dll is either not designed to run on windows or contains an error.
followed by: ITunes not installed Error 7 (Windows error 193)
Your response addressed how to fix this issue with earlier windows operating systems, but not for windows 8, so what ended up working for me was your advice applied a little differently. For anyone running windows 8 needing to know how to resolve this issue by repairing the Apple Application Support program, try following these simple steps - what a relief it was to have itunes working again after applying b noir's answer to the windows 8 operating system!
1. Swipe in from the right edge of the screen, tap Settings, and then tap Control Panel.
(If you're using a mouse, point to the lower-right corner of the screen, move the mouse pointer up, click Settings, and then click Control Panel.)
2. Click the Programs and Features icon.
3. In the list of programs and features, find the Apple Application Support feature and click to select it.
4. In the gray title bar above it, click Repair.
5. Approve the window prompts that follow until the repair has been completed.
6. Relaunch iTunes.
Hope this helps & good luck! -
I purchased the TV FRIENDS in HD on iTunes (the iTunes store stated with every HD purchase you get the SD version as well) and want to download on my I Pod Classic and get error message the I POD can not play this video. How do I download?
I see there's no answer.
This issue has ****** me off for a long time, and I am fed the **** up with it.
I DO NOT WANT TO DOWNLOAD the Movies and TV shows to every *^&%^$%# Apple device, ONLY the MUSIC!!!
COme on Apple!!! FIx this!!! -
My Mac OS X 10.4.11 will not write DVDs and gets error code 0x80020022, what is wrong?
My Mac OS X 10.4.11 will not write DVDs and gets error code 0x80020022, what is wrong?
That code is not really useful since it just means it can't write DVD's (or probably CD's). The only thing you can do is first to try a different brand of DVD's, higher quality. You could also try burning at a slower speed.
Based on the fact that you are using an OSX that's no long supported, there's probably not much you can do to correct this issue if it is software related. You may also have a failing Super Drive, another consequence of an older Mac. -
HI Since the last Apple itune WIndows update every time i open itunes I get the Welcome page and have to agree to share my library. Before the update i had only done this once. Now its every timre i open itunes
Copied from your previous post.
You are right the Iphone is locked into the carrier softbank from Japan and its not the 3g model its the one before it, I am not sure what model.
If your iPhone is not the 3G model - it is the one before that, this means your iPhone is the first generation iPhone or the original iPhone, which WAS NOT sold officially by Apple in Japan. The first generation iPhone was sold officially by Apple in the U.S. as carrier locked with AT&T, in the UK as carrier locked with O2, in Germany as carrier locked with T-Mobile, and in France as carrier locked with Orange and as officially unlocked by Orange. The ONLY country where the first generation was sold as officially unlocked was in France, which is required by French law.
The original iPhone - the one before the 3G was not sold by Apple in Japan directly or through Softbank.
Did you purchase your iPhone from Softbank or from an Apple store in Japan ? If so, this would also mean your iPhone is carrier locked with Softbank since the iPhone is sold in Japan officially as carrier locked with Softbank only, and this would be the 3G or 3GS, not the original iPhone. This would also mean you are roaming internationally with Softbank with your iPhone in China. If you are using a SIM card from a carrier in China with your iPhone, your iPhone has been hacked to be unlocked unless you purchased your iPhone from an unofficial source in Japan which was sold originally as new officially in France as officially unlocked by the carrier Orange in France.
Is your iPhone is carrier locked with Softbank in Japan, are you paying Softbank international roaming fees while using your iPhone in China? -
After updating to ios 8 through itunes, I lost my music and now I cant transfer some music from itunes (macbook pro) to my iphone 4s back. Any idea how can I do that?
After posting this, I've since found out that my iOS iTunes App on my iPhone 6 Plus works all OK when on WiFi, it just won't work when on the data/3/4G connection.
Anybody else having this same issue since updating to iOS 8.3? -
HT201210 error 3014, can't restore iPhone after updated the new version of itune
after updated the new version of itunes, my iphone can't back up and restore.
Why everytime update the new version of itunes have problem????See Network connection or download errors
Error 1479: This error occurs when trying to contact Apple for an update or restore. Quit iTunes, disconnect from USB, restart the iOS device, reconnect the device to the computer, then launch iTunes and attempt to update or restore again.
Error 1639: See this article for resolution.
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good networ -
Cannot play songs after updating the last version of iTunes
Did anybody else got the same problem?, not being able to play dowloads on your PC after updating the last version of iTunes 11.1.5.5?
Hello gtaborga,
The following article provides troubleshooting steps that can help get iTunes to play your music once more.
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Cheers,
Allen -
Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps. The Apple Mobile Device driver is loaded and operating. The anti-virus software and firewall are not at fault (were uninstalled, and made no difference). The iTunes on my older machine running Vista does recognize the inoperative iPod (iTunes has detetced an iPod in recovery mode) and allows me to restore the device. Can anyone help to resolve this problem on the Windows 7 PC?
So yu tried all of this:
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
If you had then time for an appointment at ther Genius Bar of an Apple store. -
I am unable to update latest version of Itune, I get error R6034 C runtime library incorrect. My windows are up to date and I have been able to access itune until today and now I don't have it.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
After update to latest version of iTunes I can not sync iTunes to iPad
after update to latest version of iTunes I can not sync iTunes to iPad
You have WiFi Sync now! Go into Settings, General, and Click Wi-Fi Sync. Sync from there!
-
Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll". What went wrong and how to resolve this?
Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
Just updated my iPad 2 via iTunes to iOS 7.0.2. So far everything loaded except for sent mail. Is there anyway to recover the sent mail?
You'll get a variety of earlier versions of iTunes here: Old iTunes for Mac
-
I was today invited to upgrade my iTunes when I logged on. Update failed. Every time I now try to open iTunes I get error messages. Second message reads "iTunes was not installed correctly. Please re-install iTunes. Error 7. Windows error 126". I now can't sync my iPhoneand I am worried that if I re-install I will lose all my contacts,calendar, notes, etc.
I too had this problems (Windows 8.1). A few weeks ago after the previous update before this version of itunes, I'd had a problem with the itunes store crashing and at that time I followed instructions to copy QTMovieWin.dll to the itunes folder, which fixed the store crashing.
Today I fixed the problem by:
Delete QTMovieWin.dll from C:\Program Files (x86)\iTunes.
Uninstall ALL Apple Software using Control Panel / Programs and Features. I uninstalled:
iTunes
QuickTime
Apple Mobile Device Support
Apple Application Support
Apple Software Update
Bonjour
Delete the folders:
C:\Program Files (x86)\iTunes
C:\Program Files (x86)\Common Files\Apple
Restart the computer
Reinstall QuickTime
Reinstall iTunes
Everything works GREAT now, including the iTunes store. You will not lose your media files, I got everything back, all my settings, playlists, etc. -
After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Kindly advice a process to get rid of this error, without losing my files on the iTunes.
Hi, I get the same error EVERY time iTunes updates.
I have to do the fix that is suggested in this topic (cut and paste the sqlite3.dll)
My Question:
Since this happens every time iTunes updates...... Do I have to remove SQlite3.dll from the "apple application support" folder....... so that the sqlite3.dll is only located in the "mobile device support" folder?????
It is getting really annoying to have to do the "cut and paste" fix every time iTunes updates.
Thank You,
Steve
Maybe you are looking for
-
I don't know if this is a good idea, because the external drive is going to be slower than using my local hard drive to open files from. My IMac has 1tb and the 2 external drives have 1tb each. The IMac is my computer and my Wife uses the Windows P
-
How to disable the custom button on alv?
Hi All, i created a ALV Report .I created a Custom Button on ALV.Based on the input value i need to enable/disable that Button. How can i achieve?And what are the methods i need to code? Regards Ravi
-
Query - Replacement Path for a Customer Exit Variable
Hi New to the field and the board. Any and All help is greatly appreciated. I have created a query which runs based on a date selection. The query have few customer exit variables whose values are set in ABAP. All Key Figures in the query are brough
-
Workflow Permission on new repository manager
Hi all, Ive customized a folder command workflow inheritance that applies the approval workflow to the subfolders. It is working properly on the /documents repository. The problem occurs when I tried to execute the same folder command on the rep
-
Error java.lang.NoClassDefFoundError: com/tangosol/net/CacheFactory
error java.lang.NoClassDefFoundError: com/tangosol/net/CacheFactory could please let me know why i am getting this error. I have coherence.jar and tangosol.jar in classpath. Edited by: tally_15 on Jun 23, 2010 6:12 AM