After update, Garageband won't detect midi keyboard.

After upgrading to Lion, Garageband won't detect my midi keyboard. I've already scanned for it in the Audio midi utility. It worked fine before the update. Does anyone know a solution?

Maybe you should tell us what "the keyboard" is.

Similar Messages

TS5249 Core midi quit unexpectedly after updating garageband. solutions ?

Core midi quit unexpectedly after updating garageband. solutions ?

Open Console in Utilities & see if there are any clues or repeating messages when this happens.
Might try this...
http://www.hardmac.com/news/2004/01/26/garageband-startup-crash-fix

After Updating to 10.5.7 my keyboard is set to USA instead Switzerland!

After every reboot of my 10.5.7 i've USA keyboard instead Switzerland German.
This ist on more than one maschine in my company...
Any ideas?

After updating to 10.5.7 my keyboard switches to US everytime I change networks. I have US turned off, unchecked, if I could I would delete it from the system. The keyboard viewer also disappears and has to be rechecked. Since I change networks 3-4 times a day (Work, Home, School) this is a real hassle and obviously a bug.

After updating to 5.0.1 my keyboard dock no longer works.

After updating, the keyboard is no longer recognized. It shows that it is plugged in (charging) but keys won't respond.

Are the songs that you are trying to play grayed out in your playlists?
I had this problem after upgrading to iOS 5, and I found that deleting all the songs from my device and re-syncing them fixed the problem.
To do this:
1. Attach your iOS device (either using the cable or to the same wi-fi network if using iTunes Wi-Fi Sync).
2. Open iTunes, and click on your iOS device.
3. Click on the Music tab.
4. Uncheck the "Sync Music" checkbox at the top.
5. When asked, click "Don't Sync Music".
6. Sync the iOS device. Your songs will be removed from the device.
7. Check the "Sync Music" checkbox at the top once again.
8. Sync the iOS device again, and your songs will be re-added.
I don't know why the upgrade made some songs unreadable, but the resync fixed the problem for me (I had to do this for each of my iOS devices after upgrading them all to iOS 5). Fortunately, I only had 1,000 songs, so the resync didn't take forever.
Hope this helps!

Bought a Quadro K2000 Video Card, After Effects CC Won't detect it?

I recently bought a Quadro K2000 for some simple 1080p video editing and rendering. Now there comes the problem, It seems like After Effects is not detecting the card, CUDA is enabled and the card is supported in the list. I have tried many solutions but unfortunately I still have this problem. Also with rendering a video my CPU still takes all the load instead of the GPU, therefore it goes really slow, 5 minute render takes up to 2+ hours. I bought this video card so my render also got quicker but it seems like After Effects just won't use the GPU for rendering. I have Ray tracing 3D rendering on.
Can someone please explain to me why my Quadro K2000 is not used for rendering the videos but instead it still uses my CPU. I hope the $500 was no waste of money for this card.
Thanks in advance,
Sjoerd

You have given us little information to go by. What exact version of After Effects? What operating system. Show a screenshot of your GPU Information dialog box in After Effects.
The Quadro K2000 was added to the list of cards tested and supported for use by the ray-traced 3D renderer in this version:
http://blogs.adobe.com/aftereffects/2013/09/after-effects-cc-12-1-whats-new-and-changed.ht ml

After update, Garageband 10 is deadly slow in Mavericks 10.9.3

After updating to Mavericks 10.9.3 and to Garageband 10.0.2, Garageband is very slow, permanently triggering the beach ball - especially when editing piano rolls.
Looking at the Activity Monitor at such moments, I see that the WindowServer process takes 100% CPU.
Any help would be much appreciated.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

After updating, Firefox won't connect to the internet. All websites timeout. Internet explorer works fine.

I started up my computer and opened up firefox. A box popped up that said firefox was updating. After updating was complete, firefox attempted to connect to my homepage, yahoo, but the connection timed out. I tried connecting to other websites and they also timed out. My internet connection is good because internet explorer works fine.

Common cause after upgrading/updating is that your security software (firewall) may not recognize the new version and may be blocking Firefox and/or plugin-container. Remove all permissions for Firefox and plugin-container from your firewall's programs permissions list, then start Firefox and go to any website and let it detect and set internet access permissions.
*See [https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Cannot connect after upgrading Firefox]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Macbook pro was preinstalled with 9.2.1and after update iPhoto won't open-what to do

macbook pro was preinstalled with 9.2.1 and after update won't open-get message that says 9.2.1 isn't supported by OS X

Update to 9.5.1 from the AppStore.
Sign ino the AppStore with your AppleID and check, if there is iPhoto on your Purchased tab to be accepted to your AppleID. If yes, accept it. Then check the "Updates" tab of the App Store.
If you cannot update this way, download an update from the Software update section of the Apple Support page. You need to update at least to version iPhoto 9.4.3.
What MacOS version did you upgrade from? Did your Mac come with system installation media, or did you install and update from the AppStore?

After update, firefox won't open

after last update, firefox won't start. maybe because I believed it would restart the first time I started computer. the instructions have always given that option

Try to download the full version and trash the currently installed version to do a clean (re)install of the latest version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 15.0.x: http://www.mozilla.org/en-US/firefox/all.html
*Trash the current Firefox application (e.g. open the Applications folder in Finder and drag the Firefox application to the Trash) to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Computer will not start after update. Won't boot. Security Update. Grey.

This is a fix that worked for me. 2 times in the past Automatic Software update has corrupted my hard drive.
When installing using SOFTWARE UPDATE the installer for the security update fails, says it has been moved to trash and to try again. Well if you restart, you get a system hang and much sadness.
I tried the usual stuff, booting from CD(osx) and selecting the disk utility from the top menu. But that didn't fix it. Then I ran DiskWarrior, which usually fixes anything, but it didn't this time.
Here is what did work. I checked my other mac to see what the last security update was, and it had the 2009-001 update (worked on that mac). So I knew now that the one that screwed up was that update.
I downloaded that update to my laptop.
I started my iMac (the one that crashed after update) in "target disk mode" - this treats the whole computer as an external firewire disk drive (it's totally safe as long as you don't erase anything) - you start into target mode by holding down "T" key while turning on, leave it pressed until you see a symbol on the screen that looks like a "Y".
I hooked up a firewire cable from the iMac to my laptop and waited until the iMacs Hard drive appeared on the laptop desktop.
Now you can browse the corrupt drive just like a regular external drive.
If you have an external drive with room, this is a good time to back up the entire corrupt drive to a folder on the other external just in case...
But what I have found is that when the installer for the security update failed, it corrupted the file that mac osx needs to read during boot, so it is an isolated failure, but it is always better to be safe.
at this point you are ready to attempt the repair..
On my laptop I ran the installer for the security update I had manually downloaded from apples site. When asked for destination for the install I select the HD for the iMac (or whatever unit has the no boot situation that got corrupted). (note that if you have not renamed your main hard drives, you will have a choice of 2 with the same name). Usually the drive on the computer you are using will be first in line. Rename the drive on the computer you are using before running the install if you want to be sure there are no mistakes..)
Select the disk you want to (re)install to, and let it go. It is a long update, so be patient and let it finish. It should say preparing install, installing, finishing, and optimizing system performance...
When it says that the installation completed successfully you can eject the corrupt hard drive by dragging to the trash to dismount it. Then unplug the firewire cable.
Shut down the repaired (hopefully) machine by holding the power button until it turns of.
Count to ten.
Prepare a celebratory or misery soothing beverage (but keep it in the other room).
Some people like to start in safe mode by holding down shift key while turning on, but I couldn't get it to work on mine...
Turn the computer back on and wait. The boot process will take longer than usual the first time.
If and when you get to login or desktop, go in and run apple disk utility and repair the disk, and repair the permissions.
If it worked, breathe a sigh, do a happy dance. And from now on when mac os says there are updates available, write them down, then go to apples site, download them manually, and install them manually, one at a time from now on, to avoid hassles.
Hope this helps!
Enjoy!

Thanks for the post/tips newfocus, hope it helps somebody!

I can't Update Garageband iMac21.5-inch, Mid 2011

I cant update garageband to 6.05 ... App Store says i have update available but when i try to update ... there is an error ... i have an imac 21.5 garageband was preinstalled.. tyied to download and this messege apperse ....

The GarageBand Update at the App Store will only update GarageBand if it was purchased from the App Store.
To Update the preinstalled version of GarageBand, open GarageBand and then go up on the Menu bar to Check for Updates...
Note the above screenshot is for the preinstalled version of GarageBand 06' and may not acuratlly represent the location of Check for Updates in GarageBand 11.

Mac Mini 2011 Server Won't Detect Bluetooth Keyboard

Hi all,
My new Mac Mini Server (2011) with Lion preinstalled is causing my some headaches and it is barely out of the box. I have an Apple Wireless Keyboard and a third-party bluetooth mouse. I unpaired both from my Macbook Pro and then tried switching the MBP's bluetooth off and even turning off the whole **** machine. In the mean time, the Mac Mini's Setup Assistant could not find my keyboard, but it did find my mouse. I tried putting fresh batteries in my keyboard and everything looks fine since even my iPad can "see" the keyboard is active. However, because Setup Assistant cannot detect the keyboard, I cannot get past the Setup stage (and hopefully try fiddling with the bluetooth settings). I am compleetly stuck on the page where one has to input an Admininstor's password for the server. A mouse alone cannot get me past this part. Can anyone please please help me?
Denis

Start the mini looking for the keyboard then turn the keyboard off and on again (worked for me)

After update, Itunes won't start, saying I need QT 7.3 but only have 7.2

I just did their update download to Itunes 6 after they informed me it was available. But the QuickTime version for windows is 7.0.2. But my windows computer won't start Itunes saying I need 7.0.3. I've had itunes for close to two years and have never had a problem. Until now. Now I can't open Itunes, can't get support help, and it doesn't seem like I can even go back to Itunes 5 which worked great. Any suggestions? Thanks in advance.

well you HAVE TO HAVE quicktime in order for iTunes to work sorry
ok try these articles http://docs.info.apple.com/article.html?artnum=302538
http://consumer.installshield.com/kb.asp?id=Q111019
http://docs.info.apple.com/article.html?artnum=302775
http://error1603.windowsreinstall.com/
check and make sure you firewall and antivirus is turned off during installation because it will block it from downlaoding.

URGENT!! Garageband can't detect my keyboard, please help!!

My macbook is MAC OS X version 10.5.2. I have a yamaha portable grand model DGX-220, but when I connect it to the macbook and run garageband it just doesn't work. Could anyone please help? Many thanks.

I have a Yamaha PSR-270 hooked up with the UX-16 midi adapter (also from Yamaha) it works beautifully. They have updated drivers for all their KB's and yours isn't as old as mine. You need the drivers - WHAT IS THE EXACT MODEL? Once you have those installed and we know the model I can probably walk you through setting it up. My PSR required a midi -> USB interface - yours doesn't?
I'll locate the driver for you if I know the actual Model #
*EDIT: found yours - you need the midi adapter*
http://www.yamaha.com/yamahavgn/CDA/ContentDetail/ModelSeriesDetail/0,,CNTID%252 53D2382%252526CTID%25253D204600,00.html
I got mine on Ebay for $25 - the link above also has the newest Mac Drivers for it - I don't believe you can just use USB as that's for downloading songs into it, etc - MIDI is what you need to PLAY IT on a computer software package like GARAGEBAND. There's a lot of cheaper interfaces but the YAMAHA one works flawlessly so I bought it as there were a lot of Yamaha "people" having issues with the small M-Audio ones, etc.
Also when I got it I couldn't get anything to work - from Advice I got FROM THIS FORUM I reversed the 2 cables and VOILA' - beautiful, LUSH sound - with all Garageband instruments working great! It works great as a Bass Guitar and Drums too as I'm a guitarist and wanted to do my own Bass lines and drumming too - Schaweeeet!
Message was edited by: strangedogs

TS3274 after updating my ipad with ios7, the keyboard is really slow. Any suggestions how to fix it?

after I updated my iPad mini to ios7, the keyboard has been slow. Any ideas how to fix it? I tried restarting it already. Also, how do you clear apps now? I pushed the home button twice to bring up the apps, but I don't know how to delete them. I tried holding the app down to make it shake but that doesn't work anymore.

To clear apps swipe up on the app. You might want to try resetting all setting it has helped some. Also try setting>general>accessibility>increase contrast turning this on reduces a couple animations which some say shows an increase in speed.

After update, Garageband won't detect midi keyboard.

Similar Messages

Maybe you are looking for