After Update Mac OS 10.6.5 my macbook freeze

Immediately after updated to release 10.6.5 I encountered the following problem that occurs at least 3-4 votle day and apparently when I put my Macbook Pro under stress (quickly move windows, view many youtube videos, and any kind of excessive load on the machine): the screen freezes with all the windows blocked, and I can only move the the mouse cursor. To solve the problem I turn off the machine while holding down the power button!
The Apple Hardware Test found no hardware problem and it is strange that these problems occurred immediately after upgrading the operating system.
Please, How can I fix this? Does anyone have my same problem?
Thanks!

Do you think it's a hardware problem?
I don't think because it's occured immediately after the update and because it's the same problem of these threads:
- System Freezes Randomly after 10.6.3 Update (http://discussions.apple.com/thread.jspa?threadID=2383288&tstart=30)
- System freezes after 10.6.5 update (http://discussions.apple.com/thread.jspa?threadID=2650373&tstart=0)
- 10.6.5, Has the new update resolved the random freeze issue (http://discussions.apple.com/thread.jspa?threadID=2645209&tstart=15)

Similar Messages

Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick

After upgrading to Maverick OSX on the iMac printing from CS5 via Epson R3880 is not working correctly. In Print Settings menu the drop downs for Colour and Colour Settings are greyed out. I already re-installed PS and installed the new drivers from epson. Any ideas?

but after choosing PS manages color, the options in the print menu for choosing color (color or b&W) and color settings are not available anymore. They used to be the last three years I printed with photoshop/epson 3880.
Instead they are greyed out now.
attached screenshot:
Op 30 mei 2014, om 01:47 heeft Chris Cox <[email protected]> het volgende geschreven:
Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
created by Chris Cox in Photoshop General Discussion - View the full discussion
If Photoshop managed color, then the controls in the printer driver are supposed to be grayed out - that's how Apple specifies drivers to work (because only one party should be managing the print color).
So what you're describing is perfectly normal.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6420209#6420209
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

HT2848 hi my mac ppc g5 very slow after update mac os x 10.5.8

hi my mac ppc g5 very slow after update mac os x 10.5.8

See if you can hop over to the PowerMac forums.

Syncing problems - itunes podcasts cloud clutter: whenever I sync iphone and mac after updating mac, mac adds already listened to podcasts to iphone. This never happened before iOS update with iphone 4S

This was an iOS update that came around iphone 4S that overwrites the phone with what has been updated on the mac. The mac doesn't seem to know I've already listened to something on the phone. It redownloads the podcast to the mac, marking it as unplayed. Then, when I sync the iphone with mac (after updating mac), the mac adds already listened to podcasts to iphone marked as upplayed. The way it used to work was that the itunes on your mac (or PC) acted as a master content controller to whatever was on any of your devices. Ever since the cloud was added, the mac seems to have lost this ability to be a master content controller. Now the cloud clutters up itunes.
Another problem that the cloud, itunes and podcasts is that any deleted from the mac will show up again, with links to the cloud downloaded again. This really clutters things up. It seems like the cloud has become the master controller, even though I don't use it.
Any idea how to solve these problems? Any idea which can be used as a master content controller?

Yes, I don't disagree with the first part. However, I could sync my iphone (to itunes 9.2.1) when I had 4.1 installed from another computer).
I think that I am limited to an old os (10.4.11) on my mac as it is old (pre-intel) and therefore I can't update my OS. If this isn't the case, then an update to my OS could solve the problem. I'll check the requirements of the newer OS now.

After updating to 10.10.3, now my Macbook Pro will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?

After updating to 10.10.3, now my Macbook Pro 15" (mid-2014) will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?
By the way, I also updated my Macbook Pro 17" (mid-2009) and it seems to be running fine, though I haven't tried to restart it and log in. I'm afraid I won't be able to get this one to work either if I do.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

After update Mac OS 10.9.1 Trim Enabler does not work anymore!

After updating from Mac OS 10.9.0 to 10.9.1 the program Trim Enabler does not work anymore and my 4 SSDs from Samsung and Kingston are no longer supported.
What can I do?
Should I scrap my SSDs?
Why does Apple do such things?
Will Apple that I switch to Windows? There Trim works with all SSDs and BluRay will not boycott!

Apple does not support TRIM for SSDs that were not factory
installed and TRIM Enabler is a hack to get around this. Any
hack is always subject to being disabled, or worse, with any
system update whether it is OSX or Windows.

BIG problem with Mail after updating Mac OS X Leopard to 10.5.7

Hi everyone,
after updating OS X Leopard to 10.5.7, I noticed that all of my Mail accounts had disappeared. If I try to set them up again, Mail doesn't seem to be able to store them and after quitting and re-launching, they're gone. This had never happened under 10.5.6 or previous OS.
Strangely enough, only the MobileMe account seems to be stored.
I tried repairing the permissions, checking the hard disk, re-installing Mail from the Leopard DVD, deleting the com.apple.mail.plist file. Nothing seems to work so far.
Any suggestions? I haven't been able to use Mail for almost a month now. I used to have 6/7 accounts and I can't stand having to check their web-based version. I want Mail to work as it always has!

Rest assured it doesn't happen to all Macs with 10.5.7. I'd start a new topic thread here:
http://discussions.apple.com/forum.jspa?forumID=1223&start=0
You'll get a wider audience, and won't confuse the original poster with solutions that don't apply to them.

After update mac os x lion 10.7 to 10.7.4 the os fail to boot ??

i just installed mac os x lion 10.7 on virtual machine ( vmware workestation 8) for some reasons,, after that I start the software update to update 10.7.4
after updating the os fail to boot ( changing tha Apple logo to another logo )..
what can i do to fix this problem ??

mohammad207 wrote:
i just installed mac os x lion 10.7 on virtual machine ( vmware workestation 8) for some reasons,, after that I start the software update to update 10.7.4
after updating the os fail to boot ( changing tha Apple logo to another logo )..
what can i do to fix this problem ??
10.7 client or server?

ISync non syncronize after update mac os x 10.6

Hi.
I don't know if the problem is in the phone (Nokia N85) or in the mac os x 10.6 but i can't sync my phone with iSync after update to last one mac os x update.
I try to remove and reasociate the phone with the iSync and non error apear in iSinc. Now when I make Sync iSync say error and no more info.
Somthing suggestion?

What is the exact error message iSync gives?
Have you tried resetting SyncServices as described here?
http://support.apple.com/kb/TS1627

Downloading issue after updating Mac OS X Tiger 10.4.9

I got an information about there're new versions for iturns, safari, Quick Time, Mac OS X, so I clicked the "update" for all. But after updating, I found the speed of downloading softwares from internet become so slow-more than 30 times slower! I don't know whether this problem is because of the system updating from my original 10.4.9, or other reasons?

That's a lot of updates to digest all at once.
There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.

After updating to yosemite, start up and recovery mode freeze

I recently got a 2010 Macbook Pro off of ebay and it was on 10.6 so I decided to update to 10.10. After updating it told me to restart so I did. Well after restarting the spinning wheel froze so I restarted it again. It does the same thing. I googled around to see if anyone had the same problem as me, plenty of people did, they said that they found the recovery partition and the Mac started working again, so I tried finding the recovery partition by pressing shift, option, and r (or something like that) and it turns out I don't have one. Then I tried Internet Recovery and that was a bust too, so now in stuck with a $700 paperweight. I'll post the sspecs on my Macbook below -
Brand: Apple
Processor Type: Intel Core 2 Duo
Product Family: MacBook Pro
Processor Speed: 2.40 GHz
Screen Size: 13.3"
Operating System: Mac OS X 10.10
Memory: 4 GB
Release Date: April, 2010
Hard Drive Capacity: 1 TB
Model Number: A1278
Serial Number: W8*****ATP
Model ID: MacBookPro7,1
Charging: 60 Watt MagSafe 1
<Personal Information Edited by Host>

Peter
Do you have a back up? What version of iPhoto do you have? Assuming 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

After updating to efi 1.2 wifi slow, finder freezes

After updating Mail, iBooks and EFI (late MBPr 2013, 15") the finder froze several times and wifi became very slow (20 MBits max!). Is there any possibility to return to the former state?

It appears you've done everything apple would suggest, but here's their support document on the subject just in case you over looked something:
http://support.apple.com/kb/TS1559

After Update Mac from OS 10.7 to OS 10.8 No windows- no bootable device insert boot disk

Hi Please help.
I ve updated my mac from OS X [10.7] to [10.8] and then i tried to use windows but i get this error "No bootable device -- insert boot disk and press any key"
What could be the problem,
I can see my boot camp hard drive partion in mac and even i can see my stuff in it. but no start up with PC
iMac Intel, 20" 2007

I made the System Recovery Options and it is showing "Checking for rrors this might take more than an hour..."
finally i get this error "Startup repair cannnot repair this computer automatically"
then after this i tried to start up with holding option key and choosing the Bootcamp drive. winsows asked me to start up using repair tool or normally, I chose it "NORMAL" It came up but after showing Windows loading page it gave me this blure screen error "STOP .....FATAL error..... the system has been shut down"
:|
so any suggestion ???

No Power after Update - Mac OS X 10.4.8 Update (Intel) - HELP!!

Hi all -
Brand new holiday Mac user here... i've searched, yet can't get the specifics i'm in search of...
I just cracked the seal on my new Mac Book Pro 20 minutes ago... after initial set up, I got the message to download the new update... after successful update, i then shut down as instructed... now, NOTHING... my Mac Book won't come back on...
Can anyone help me here... i'm losing my mind wondering what's goin on with my new $2000 toy, before I've had a chance to enjoy it...
thx a million and Happy New Year -

I'm really sorry to hear your troubles. Try a SMC
reset.....
http://docs.info.apple.com/article.html?artnum=303319
Thanks for the rapid reply... I tried the steps at the support link and no success... the light in the front (that shows where the lid latch release is) is glowing, but not the power button and nothing is on the screen...
Any other thoughts here... please!!!

Iphoto doesn't open after update MAC OSX 10.6.8, error message says: library not loaded

iphoto does not open after software update.
i am using MAC OS X 10.6.8
it says: library not loaded,...reason image not found
EXC BReakpoint (sigtrap)

It's missing background frameworks:
Library not loaded:/library/frameworks/ilifepagelayout.framework/versions/a/ilifePageLayout
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

After Update Mac OS 10.6.5 my macbook freeze

Similar Messages

Maybe you are looking for