After update MAC OS doesn't start anymore

hello there
i just installed the new updates my MAC OS required (intel security update 01-2009 an some kind of flash plugin) and now MAC OS doesn't start anymore
i press the power button and then at first the apple icon appears and then i begins to load ... nearly an hour it loaded until i tried again ...
it doesn't work ...
my windows vista partition on the same notebook is still working so what about the update now???
anybody can help me?

From your Install DVD boot from same & try running repair permissions and +repair disk.+
TIP-You should Repair Permissions from the HD & restart:
*Before & After installing and/or updating an OS (Operating System).*
*After installing software.*
After burning sessions

Similar Messages

  • Apple TV 3 doesn't start anymore after update

    After installing the current software update my ATV3 didnn't start anymore.
    LED is blinking slowly forever.
    So I connected it to ITunes with a Micro-USB cable to restore it.  Restore went fine.
    Back on the TV with Ethernet connected I can choose my language then the screen gets dark for a moment and I'm back at the screen with the language chioces.
    When I disconnect the Ethernet cable, I get to the "Choose the WiFi Network or connect Ethernet" screen.
    -> my Wifi Network is not shown (its normally visible)
    -> when I reconnect the Ethernet cable I'm rebooted back to the language coice again.
    Retried the USB based Restore,  Checked Firewall -> there I see that it gets the correct IP (it has a fixed one) and pacet capture shows hat it does a successfull http and an https request that seems to be cut short.  No packets show up as blocked.
    I stopped the DHCP server to get it to manual configuration -> still reboots as soon as it gets network.
    Disconnected all other Apple devices from the net (might be a Bonjour problem) -> still reboots.

    After posting this I found this thread:
    https://discussions.apple.com/thread/4350553?start=0&tstart=0
    Many have this problem, solution that worked for me was downgrading to 5.0.1 like described in the thread.

  • Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick

    After upgrading to Maverick OSX on the iMac printing from CS5 via Epson R3880 is not working correctly. In Print Settings menu the drop downs for Colour and Colour Settings are greyed out. I already re-installed PS and installed the new drivers from epson. Any ideas?

    but after choosing PS manages color, the options in the print menu for choosing color (color or b&W) and color settings are not available anymore. They used to be the last three years I printed with photoshop/epson 3880.
    Instead they are greyed out now.
    attached screenshot:
    Op 30 mei 2014, om 01:47 heeft Chris Cox <[email protected]> het volgende geschreven:
    Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
    created by Chris Cox in Photoshop General Discussion - View the full discussion
    If Photoshop managed color, then the controls in the printer driver are supposed to be grayed out - that's how Apple specifies drivers to work (because only one party should be managing the print color).
    So what you're describing is perfectly normal.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6420209#6420209
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Satellite C55-A-1DC doesn't start anymore

    My computer doesn't start anymore!
    When I push the on button, everything is going like it supposed to go,until you see the screen with:
    Toshiba
    Leading Innovation >>>
    And then it just stays stuck at that for a while, and then it just goes black!!
    I don't know what to do anymore :(
    Please help me!!
    (sorry for my bad english:( )

    Are you able to access the BIOS?
    Check this by pressing the F2 button after powering on the unit.
    If this isnt possible, there must be some kind of hardware problem (motherboard, RAM).
    In case you could access the BIOS, check the first BIOS page. Usually the HDD should be listed there. HDD name, size information should be visible.
    In case this HDD isnt listed, I assume your HDD is faulty and should be replaced.
    Of course, you would need to reinstall the system once again.
    In case the HDD is listed in BIOS, I would recommend you to boot using the Recovery disk (or another Windows installation disk) in order to reinstall the system.

  • My Mac Mini doesn't start up when usb devices are plugged in.

    My Mac Mini doesn't start up when usb devices are plugged in.
    It just shows the "White screen of Death" when 1 or more usb ports are used.

    Haha. I just restarted it and it worked. Instead of turning it off and on. But thanks.
    By the way:
    Note: It is possible that the SMC could encounter an issue that may cause unusual system behavior typically related to the symptoms described below. In some cases, resetting the SMC may be the only correct method to resolve the issue, however, an SMC reset should only be attempted after all other standard troubleshooting has been performed.
    So I hope it is fixed for now. But could someone also post another solution?

  • Syncing problems - itunes podcasts cloud clutter: whenever I sync iphone and mac after updating mac, mac adds already listened to podcasts to iphone. This never happened before iOS update with iphone 4S

    This was an iOS update that came around iphone 4S that overwrites the phone with what has been updated on the mac. The mac doesn't seem to know I've already listened to something on the phone. It redownloads the podcast to the mac, marking it as unplayed. Then, when I sync the iphone with mac (after updating mac), the mac adds already listened to podcasts to iphone marked as upplayed. The way it used to work was that the itunes on your mac (or PC) acted as a master content controller to whatever was on any of your devices. Ever since the cloud was added, the mac seems to have lost this ability to be a master content controller. Now the cloud clutters up itunes.
    Another problem that the cloud, itunes and podcasts is that any deleted from the mac will show up again, with links to the cloud downloaded again. This really clutters things up. It seems like the cloud has become the master controller, even though I don't use it.
    Any idea how to solve these problems? Any idea which can be used as a master content controller?

    Yes, I don't disagree with the first part. However, I could sync my iphone (to itunes 9.2.1) when I had 4.1 installed from another computer).
    I think that I am limited to an old os (10.4.11) on my mac as it is old (pre-intel) and therefore I can't update my OS. If this isn't the case, then an update to my OS could solve the problem. I'll check the requirements of the newer OS now.

  • I got this new Ipad. After a month my charger broke. So what I did is got a new charger that is not from Apple company it was from a different company. After 3 week it doesn't work anymore. What do I do. HELP ME PLEASE!!!!!!!!!!!

    I got this new Ipad. After a month my charger broke. So what I did is got a new charger that is not from Apple company it was from a different company. After 3 week it doesn't work anymore. What do I do. HELP ME PLEASE!!!!!!!!!!!

    Not normal. Take it (iPad, cable & charger) to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • HT2848 hi my mac ppc g5 very slow after update mac os x 10.5.8

    hi my mac ppc g5 very slow after update mac os x 10.5.8

    See if you can hop over to the PowerMac forums.

  • I try to download apps/update, but it doesn't starts downloading. (No jailbreak)

    try to download apps/update, but it doesn't starts downloading. (I don't have jailbreak)

    Just what happens?
    Try the standard fixes:
    - Reset. Nothing was lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.

  • After update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please

    after update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • My Mac HD doesn't start up, I get the reinstall prompt and do not see a macintosh HD icon while starting up using option key

    My Mac HD doesn't start up, I get the reinstall prompt and do not see a macintosh HD icon while starting up using option key.
    When start up I land into the Mac OSX Installer. Has my LION crashed or the HD is not responding?

    Try booting while holding down the Option key but make sure there aren't any disks in the optical drive first.
    I just found this:
    Select a startup disk *(on some computers)*
    Option (To open the optical drive when choosing a startup disk, press ⌘-period.)
    here. http://docs.info.apple.com/article.html?path=Mac/10.5/en/cdb_strtup.html
    Carolyn

  • HT5275 Safari 6 doesn't start anymore. Where can i download it to reinstall ?

    Safari 6 doesn't start anymore. Where can i download it to reinstall ?

    You can't. You can only reinstall the OS if the app is actually corrupt. However, have you tried to see if Safari starts in another user account on your machine? Make a test account here
     > System Preferences...Users & Groups
    by clicking on the + sign in the bottom left corner. Fill out the details and click 'create'.
    Once you've made the new account, log out of your current account and into the new one.
    Does Safari open in that account?

  • After BIOS update Satellite L350-172 doesn't start anymore

    Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
    I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
    "It was stopped for reason not to damage the Computer" - blue schreen.
    How can I downgrade the bios again? Or - what have I to change in the bios-settings?

    Hi schuwe,
    Im a little bit confused about your posting. How do you tell your BIOS not to restart?
    Anyway, after BIOS update you should load the default settings in BIOS.
    Did you choose the right BIOS especially for your model?

  • [SOLVED] UEFI-System doesn't start anymore after rEFInd update

    Hi there,
    got some problem with my UEFI system after todays update of refind-efi: Arch doesn't boot anymore
    What have I done:
    At first I did a
    $ sudo pacman -Syu
    During the update I was presented with the usual information concerning copying some files from /usr/lib/refind/*. So I did this:
    $ sudo cp /usr/lib/refind/refind_x64.efi /boot/efi/EFI/refind/refind_x64.efi
    Than I did:
    $ sudo cp /usr/lib/refind/config/refind.conf /boot/efi/EFI/refind/refind.conf
    $ sudo cp -r /usr/share/refind/icons /boot/efi/EFI/refind/icons
    After that I rebooted my computer and was presented with an "Asrock" writing that doesn't change to the rEFInd-screen as it should.
    Question: What can I do now? (And what did I wrong?)
    Last edited by swordfish (2013-01-11 17:01:54)

    Hi Rod,
    thanks for your quick answer !
    Ok, you write:
    srs5694 wrote:
    The 0.6.3 package changes the name of the rEFInd binary from refindx64.efi to refind_x64.efi. This is done because the official rEFInd release uses the latter name, and it includes support scripts that work correctly only if that name is used. Thus, if you deleted your old binary and copied the new one in place without renaming it to the old name, it would stop working, since the NVRAM entry would still point to the old name. There are two solutions:
    Rename the new binary to the old name (refindx64.efi). If you do this, you'll need to keep doing it in the future or eventually do the next thing. Also, this might not work if your firmware has "helpfully" removed the existing entry. Thus, the next option is probably better...
    Use efibootmgr to add a new entry for the new name. The Arch wiki has details on this here and probably elsewhere, too.
    Jepp, I've seen the new name "refind_x64.efi". During my attempt to perform a proper install I did what you assume in your first solution - renaming the new binary to the old name (refindx64.efi).
    After that my system didn't reboot ...
    After that I booted from my USB stick with which I've installed my Arch system. I mounted my system partitions to /mnt, loaded the efivars module and arch-chrooted into the system. From there I copied the new binary from /usr/lib/refind/refind_x64.efi to /boot/efi/EFI/refind/refind_x64.efi and did this:
    # efibootmgr -c -g -d /dev/sda -p 1 -w -L "rEFInd" -l '\EFI\refind\refind_x64.efi'
    /boot/efi is mounted to /dev/sda1
    But even after I did this a reboot only led to the well known green "Asrock" writing - no rEFInd appeared
    Using the efi shell I can see that the boot entries seem to be okay.
    srs5694 wrote:rEFInd 0.6.3 has a known bug that causes it to crash on some systems. Upgrading to 0.6.4 may be necessary if you're affected by this bug. The usual symptom is a system hang, though, not a return to the firmware menu, so I suspect this isn't the problem. If it is, you can grab the official non-Arch rEFInd package and copy the refind_x64.efi file from it over the one on your ESP.
    Hm, seems as if I have to try this ...

  • After update Mac OS 10.9.1 Trim Enabler does not work anymore!

    After updating from Mac OS 10.9.0 to 10.9.1 the program Trim Enabler does not work anymore and my 4 SSDs from Samsung and Kingston are no longer supported.
    What can I do?
    Should I scrap my SSDs?
    Why does Apple do such things?
    Will Apple that I switch to Windows? There Trim works with all SSDs and BluRay will not boycott!

    Apple does not support TRIM for SSDs that were not factory
    installed and TRIM Enabler is a hack to get around this.  Any
    hack is always subject to being disabled, or worse, with any
    system update whether it is OSX or Windows.

Maybe you are looking for