After Update on Mountain Lion my Bluetooth is not working

Hello,
after I updated my iMac from Snow Leopard nach Mountain Lion 10.8.2 my Bluetooth is not working. Also my Magic Mouse works not correct. The scroll function is not available. What can I do?

Leibe AndreSch...I have encountered the same problem with Mountain Lion 10.8.2
Especially after 'sleep' mode the bluetooth keyboard and mouse are lost and although I keep an old wired mouse
handy for such problems....I can't access the Bluetooth settings to sort things.....the spinning ball nonstop.
What I do is...Force shutdown by holding power button for two seconds...When shutdown PULL power cord out from rear of iMac....wait 5 seconds.. replace and switch iMac on again.
As long as bluetooths ar 'discoverable' it restores connection.
We will both look forward to another Apple iMac software update to sort this glitch....or I HOPE so

Similar Messages

After updating to mountain lion, icloud password has not been accepted by system preferences

After updating to mountain lion my icloud password in the system preferences has not been accepted anymore. I already changed the password. Also the new one is not accepted by the system preferences. On iPhone and online everything is fine. Any idea?

I just got off the phone with Apple Support. They say they are having problems with iCloud and this issue should be resolved in 3-4 hours. We'll see......

Line 6 tone port gx doesn't work properly after updating to mountain lion, i'm hearing artefacts, how is that possible?

i am using logic 9 and line 6 toneport gx for recording my guitar. on the previous version of OSx everything worked perfect, but now, after updating to mountain lion, i hear noise after i play something. the settings were: input: toneport, output: coreaudio, 44100, buffer 512. now they are the same and i have noise. i've installed the latest drivers for toneport and changed the buffer settings. when the buffer is large, i can play some seconds without the noise but it appears after 15-20 seconds. and when the buffer is small it appears faster. i assume it has to do something with the buffer size but i don't know for sure. any ideas?

I have the same problem after updating to ML. It's unusuable for recording until it gets sorted out.
I think it's a problem at the Line 6 end. They are aware of it, and are working on some patch/fix to address the strange artifact sounds, so hopefully it will be ready soon.
See link - http://line6.com/support/thread/86574

After updating to Mountain lion I am having trouble printing to my wifi Epson printer

After updating to Mountain Lion I am having trouble printing on my wifi Epson Workforce 645. I keep getting an error message and my computer is set in the system prefrences to that printer

What is the error message?
Try resetting the printer queues:
http://support.apple.com/kb/PH11143
This update also clears your "computer name" in Syst Prefs > Sharing, and entering a computer name solves network print issues for many.

After updating to mountain lion on my mac pro I am unable to connect my g-raid

After updating to mountain lion on my mac pro I am unable to connect my g-raid 1T external hard drive using the firewire connection? I have 4 places to plug the firewire into, none work. All ports used to work with Snow leopard?

Try this:
Boot into Safe Mode then restart normally.
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
If this does not work to fix the problem, then:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

TS3276 hi after updating to Mountain Lion, it becomes difficult to quit Mail, always have to Force Quit. And while Mail is on standby, the fan keeps on running full power, the laptop is hot. Why is this happening?

hi after updating to Mountain Lion, it becomes difficult to quit Mail, always have to Force Quit. And while Mail is on standby, the fan keeps on running full power, the laptop is hot. Why is this happening?

If your computer was hot it wasn't asleep - it either didn't go to sleep or it work up after you put it to sleep. I've seen both things happen. First, read this article and follow the instructions.
1) For the next few days/weeks pay attention to the blinking light on the front of your computer when you close the lid. Don't put the computer into your backpack/case until it begins to blink. Wait a minute or so after it starts to blink to make sure it doesn't stop blinking - the signal it woke back up.
2) having followed the above instructions, if you take the computer out and it is hot again or if you take it out and discover it has powered down (you'll know this because when it starts up the battery will be drained and you'll see a progress bar over a ghostly display that will eventually become normal) immediately start the Console program and perform a search on 'sleep' and then 'wake'. This should bring up all the recent log files about sleep state changes (going to sleep and waking up). You should see one for when you put the computer to sleep and put it away and the next one should be just after you got it out. You'll find at least one though that shouldn't be there. That will tell you when the computer work up (when it shouldn't have) and might give a clue as to why.
One of the whys could be a magnet that is making the computer think the lid has been opened.

After updating to Mountain Lion, Mail has lost the RSS feeds, the colored marked mails folder, and the notes

After updating to Mountain Lion, Mail has lost the RSS feeds, the colored marked mails folder, and the notes. Where are they?

why did they erase something usefull and easy to use?

After updating to mountain lion, my Safari e-mail thru AT

After updating to mountain lion, my Safari e-mail thru AT&T, doesn't show the select all button at the top of the e-mail list, it is there in Chrome and Firefox. Is this a problem with AT&T's site or are others experiencing this same problem. Also my contacts list has change it's look and you can't select multiple contacts.

Hmmmm,
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   com.apple.phonenumbers
0x00007fff8e0300cb 0x7fff8e02e000 + 8395
1   com.apple.phonenumbers
0x00007fff8e02f50b 0x7fff8e02e000 + 5387
2   com.apple.phonenumbers
0x00007fff8e02f87d PNIsValidPhoneNumberForCountry + 112
Any ideas on your end on this phone number for Country???

Option in MAIL to "Add to iPhoto" isn't working after updating to Mountain Lion. Anybody else with this problem or sulution?

Option in MAIL to "Add to iPhoto" isn't working after updating to Mountain Lion. Anybody else with this problem or sulution?

A brief search. Or even glancing at the "more like this" list to the right will show that this is a known problem and there is no current solution. Workaround includ saving to the desktop and importing from there or opening in Quick Look and adding to iPhoto from there
LN

Iphoto wont work after updating to mountain lion

I updated to mountain lion now my iphoto wont work. I tried updating but couldnt find iphoto 9.0 they said I needed. I downloaded and installed iphoto 9.4.2 and it still won't work. It says: your photo library is either in use or has become unreadable. Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this quit iPhoto and then reopen while keeping the option and command keys pressed.
I did that and it still gives me the same message when I try to open.

Try the following:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button,
navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library â Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note: your current library will be left untouched for further attempts at a fix if so desired.
OT

HT1338 I just uploaded an update to Mountain Lion today mail no longer works

I just uploaded an update to Mountain Lion today mail no longer works.

After I ran theupdate yesterday I got a message that the update did not complete. When I tried to run mail I got a error message that mail could not run. When I rebooted and tried mail again I got the same error. I tried to load the last mail update from the apple store, but could not run it because it was unsigned.

After upgrading to mountain lion my calendar does not print in weekly mode anymore

after upgrading to mountain lion my calendar does not print in weekly mode anymore

I'm having the same problem with both my Vivotek wired network camera and Panasonic wireless network cameras. At first I thought this was an issue with the video framework in Mountain Lion, but if Firefox is working (I haven't tried it yet), it sounds like it may be an objective-c video library that has been changed. It's possible Firefox is using an objective-c interface that calls an objective-c function that isn't called by Safari or IP Camera Viewer, etc., (possibly a function that is on its way to be deprecated) or Firefox could use it's own library that directly calls the video framework.
Could be the Mountain Lion objective-c framework has a buffering issue.
Since this is occuring in both 3rd party software and Apple software, it sounds like it's an Apple issue. 3rd party applications typically utilize the Apple Developer objective-c frameworks to access video frameworks/libraries (for example, MJPEG). Thus, contacting 3rd party developers may not solve the situation (unless they can figure out a temporary bandaid--possibly figuring out the video framework call that Firefox uses and patching their software to do the same (not a simple task), but could still provide more feedback to Apple via their developer status.
Has anyone attempted to record from their cameras via iMovie or Final Cut Pro X HD? I will try mine later tonight to see if it records the hanging. If it does, then it's looking more and more like Apple's the culprit.
My suggestion is for everyone to file a bug report via http://www.apple.com/feedback/macosx.html

After Mountain Lion download, FaceTime is not working anymore. Any ideas?

After Mountain Lion download, FaceTime is not working anymore. Any ideas?

I have reinstalled mountain Lion again . This time, Facetime works when somebody calls me, and I can do calls from my Mac again. But the problem was still that I was not able to call my iPad, what I was able to do with Lion (I had one Apple-ID and two call adresses). The solution was this time to generate a second Apple-ID from the Facetime in my Mac (this doesn't affect your main Apple-ID, it's only used for Facetime). Now, it works! ;-)

Since updating to mountain lion i-movie reports not enough memory to send video to Idvd,I know there is ample memory as i have the full amount of memory installed and it is all working,help pls

Since updating to mountain lion,Imovie reports theres not enough memory to export to Idvd,I know this is not correct as i hve the maximum amount of memory installed and it is all working,i had no such problems when using Snow leopard,help pls.

Since updating to mountain lion,Imovie reports theres not enough memory to export to Idvd,I know this is not correct as i hve the maximum amount of memory installed and it is all working,i had no such problems when using Snow leopard,help pls.

After I upgraded to OS X from OS Mountain Lion my notification is not working or showing on my menu bar. Please help

After I upgraded to OS X from OS Mountain Lion my notification is not working or showing on my menu bar. Please help

Hi Gimmemar,
That does sound frustrating, to not have your iPhone 4s recognized by Image Capture or iPhoto. The article linked below has a lot of great information and some troubleshooting tips that you may not have tried already, which will resolve most issues like this one.
iOS: Unable to import photos to computer - Apple Support
Cheers,
-Jason

After Update on Mountain Lion my Bluetooth is not working

Similar Messages

Maybe you are looking for