After update phone only in the apple logo

my phone only come apple olgo in the screen after update ios and itunes

Reset, hold both home and power buttons until the iPhone begins to restart, usually takes about 10 seconds of holding both buttons.

Similar Messages

  • HT4061 my iphone will not do anything...i tried to restart and reset......the phone only displays the apple logo.

    my iphone 4 will not do anything....i tried restarting and resetting....the phone only displays the apple logo.

    Hello there, Faustinamarfo.
    The following Knowledge Base article provides some troubleshooting steps for your issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Particularly:
    Display has no backlight or dark screen
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HT4061 I was software updating of my iphone when the updating complete and start installing the wi fi connection suddenly disconnected and it couldn't be completed. Now my phone doesnot display anything its like empty. it only shows  the apple logo. help

    Hi all,
    i was upgrading my iphone to ios6.1.2; the upgrading had been completed and starting to install but suddenly the wi fi connection lost and the installation couldn't be completed. Now my phone is dead....it only shows the apple logo....can't do anything..help me out..

    Press the button at the top right and the home button together for 30 seconds, when you see the apple logo, let  them go.
    if you see a picture of the itunes symbol and a whitye usb chord then connect the device to a computer and perform a restore. 

  • How can I unlock my iphone??? on the screen I only have the apple logo and  a thing that looks like if the phone is working but no advance

    how can I unlock my iphone??? on the screen I only have the apple logo and  a thing that looks like if the phone is working but no advance

    Hi,
    Try a Reset of the Phone... You will Not Lose Any Data...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    The Apple logo will Appear and then Disappear...
    Usually takes about 10 - 15 Seconds...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • HT201406 while trying to update my ipod touch  something happened and now my screen only shows the apple logo and nothing else happens

    while updating my ipod touch something happened and now the screen only shows the apple logo that goes on-off. i dont know what to do,please somebody help me!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My iPad air would not start.  Only show the apple logo then no reaction after that.

    My iPad air would not start.  Only show the apple logo then no reaction after that.  This is already the 2nd time.  Last time I sent back to the service center and they said it is the system problem and reset the system and charge me for the service because they said it is not a hardware problem.  It happened less then 30 days and same problem again.  Can someone please send me the hard-reset step so I can try myself before I send back to the service center again?  thanks

    Here's the hard reset info:
    http://www.hard-reset.com/apple-ipad-hard-reset.html
    Post something about what happened with your visit.

  • HT201412 my ipod touch does not turn on after steps 1-4.  It only shows the apple logo and then turns off

    my ipod touch does not turn on after steps 1-4.  It only shows the apple logo and turns off

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I upgraded my iPhone 3GS in 6.1.3 but why after finished it only appear persistent apple logo, I upgraded my iPhone 3GS in 6.1.3 but why after finished it only appear persistent apple logo

    What will I do I can't open my phone it just only appear the apple logo after I upgraded it in 6.1.3?

    Hey harikrishnandhk,
    Thanks for the question. I understand you are having issue with your iPhone 3GS. You are definitely taking the correct steps, as you'll want to restore the iPhone in recovery mode. For information on doing so, see this article:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Thanks,
    Matt M.

  • Ipod only showing the apple logo and will not do anything else. 1st GEN

    my ipod will only show the apple logo when plugged in to my computer i have a dell running xp but i have tried other computers and it will not do anything but show this symbol. my computer does not recognise that it is plugged in. ive tried the apple support fix-it but it does not do anything period. the buttons do not work when plugged in or not. the only thing it does is light up when plugged in. my other ipod works perfectly no problems so this leads me to believe that its not the computers i have used. just think the ipod has had it

    Mine did the same thing last week after trying to update it via wi-fi. I then spent 11 hours Sunday updating my itunes on the laptop then restoring my ipod. Now all it does is beep as if it is just plugged in and flash the white apple logo. It beeps constantly. My computer at first didn't recognize it, then it did but said I needed to unlock it,(since I can't get the home screen up, I can't.) and now it doesn't recognize it at all. I've tried both computers.

  • My iPhone 5's screen will only blink the apple logo on and off but never fully turn on

    When I plug in my iPhone 5, it will only blink the apple logo on and off but never fully turn on. I tried to reset and that didn't help, any suggestions.

    Hi,
    Try a Reset of the Phone... You will Not Lose Any Data...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    The Apple logo will Appear and then Disappear...
    Usually takes about 10 - 15 Seconds...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • Iphone 3G only will only flash the Apple logo and do nothing else. HELP

    My phone started acting up yesterday and then it started only showing the apple logo. It flashes off and on. I plugged it in the computer and it stopped when plugged in. I then downloaded the new software and it still does the same thing. Any help or information you can give will be greatly appreciated. I bought the phone overseas so I doubt I can get official support here in the USA. I just moved back to the USA from Singapore.

    See if you can force the phone into recovery mode:
    Leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • TS3988 please help i upgraded my iphone5 to new ios7 yesterday 2pm and untill now its already 17hours and why cant access or back to normal?is this normal or stil upgrading? it only appears the apple logo on screen and keep coming the logo screen on and o

    please help i upgraded my iphone5 to new ios7 yesterday 2pm and untill now its already 17hours and why cant access or back to normal?is this normal or stil upgrading? it only appears the apple logo on screen and keep coming the logo screen on and off.do i need to bring my phone to apple center or is this iops 7 takes longer time or an hours to successfully upgraded.please help me what can i do?

    Anyone have any suggestions? or is everyone else just as clueless as me !

  • How to fix a frozen ipod touch, it only shows the apple logo?

    How do you fix  a frozen ipod touch, it only shows the apple logo?

    Hello,
    I have same broken iPod Touch 4G, I'm stuck on the Apple logo and only what I can do is just restart. If I connect iPod turns on but that's all. I checked a lot of tricks how to restart/reboot device and how to get DFU but I have only the logo. iTunes on my mac can't recognize the device.
    And in Apple retail store the guy told me: sorry it's dead. We can fix for about £200. After 1 month when my waranty is finished. Funny isn't it? I can't believe that my lovely iPod is dead after 13 months. Where is the "for quality you have to pay." Is it conspiracy if you don't buy extra waranty we will send you killing signal into your iDevice?
    Many thanks for help

  • Device only shows the apple logo

    My I Pod touch only shows the apple logo.  I have installed the updated version of itunes and it will not reconize my device.

    Instructions are here.
    There have been some problems accessing pages on the Apple web site.  If the hyperlink doesn't work, try again.

  • What do i do if my iphone only shows the apple logo?

    It only shows the apple logo noe and then. Help please

    Restore it.  This link will help:  If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

Maybe you are looking for

  • SSRS: "View Report" button doesn't refresh parameter dropdowns

    So many people have asked similar questions about why SSRS report parameters are not refreshed when "View Report" button is clicked and MSDN simply comes back with an answer "work as designed". It's a bad design, period. Here is my suggestion to Micr

  • Streaming Video, iTunes rentals are too dark.  Help!

    Using a 2013 Macbook Air, pretty much fully loaded. I'm noticing that movies purchased on iTunes, as well as Handbrake rips of my own DVDS, and streaming through both Amazon Prime and Netflix, using MS Silverlight and Quicktime... all videos are too

  • Problems with Memo data type in access

    I have a Java program which is connected to a Microsoft Access Database. When trying to get a Memo data type field out of the DB and putting it into a StringBuffer, it causes a Function sequence error, even though it does put the field into the said

  • Adding Guide Lines In Photoshop

    Hi All, My last post was classed as answered as i got the answer i was looking for and am amazed at the response time. I was just wondering how i add guide lines in photoshop CS4. Say i have a image.psd open that has guide lines already on it, how ca

  • Flat view to hide items in Document Sets

    I had a document library with custom property 'category' and made views to filter contents by category. Those views are 'flat' views because the library has subfolders but I want to show all items of a specific category. Now, I want to enable this li