After update, Podcast Title and Description takes over the entire screen

Can't they set the app to cut off after a certain amount of characters like the old app was?

I presume you are runnning iTunes on either an OS X 10.7 or OS X 10.8 system. Move the cursor to the very top of the screen so that the menu bar appears, then click the blue box with the arrows at the very right corner of the menu bar, or press Shift-Command-F. That will switch iTunes back to a normal window, which it should then remember for future launches.
Regards.

Similar Messages

When I go into iTunes on my Mac is recently takes over the entire screen and I can not get rid of it. Is there a setting I can change to have it work the old way?

When I go into iTunes (the latest update) now, it takes over the entire screen is difficult to remove. Is there a setting I can change in it to have it behave the old way?

I presume you are runnning iTunes on either an OS X 10.7 or OS X 10.8 system. Move the cursor to the very top of the screen so that the menu bar appears, then click the blue box with the arrows at the very right corner of the menu bar, or press Shift-Command-F. That will switch iTunes back to a normal window, which it should then remember for future launches.
Regards.

While trying to access my local network I get the message..."The page could not be opened because server cannot be found." This, after updating to Yosemite and paying (again) for the server app.

while trying to access my local network I get the message..."The page could not be opened because server cannot be found." This, after updating to Yosemite and paying (again) for the server app.

It's absolutley scandalous that a company with Apple's resources can let this happen. They should have staggered the release by region rather than opening the flood gates. The upgrade itself took me about 10 attempts to download it, and then I thought I was home free. That was until it rebooted and won't activate. It's over 2 hours now.
Scandalous!

IChat disconnects after a few seconds and starts to blink the whole screen

iChat disconnects after a few seconds and starts to blink the whole screen
this started since I installed Leopard; if I go back to 10.4 it works OK. I got rid of all the plist and it still hangs up. How can I uninstall this. On my laptop it works OK but I installed it with complete erase on laptop; on my desktop I stalled it over the old system.
error message AIM time out An AIM service error occurred.
Error: Serv:RequestTimeout
and you have attemptedto log too often in a short period of time. wait a few minutes before trying to login in again.
EVEN THOUGH I ONLY TRIED ONCE TO LOG IN.

If you Archived and Installed then check iChat launches from the Applications Folder.
If it does that Drag the current (iChat 3) icon off the DOCK and drag iChat 4 to the DOCK.
8:03 PM Tuesday; December 4, 2007

CS6 problem. When I open the Mask panel, it takes up the entire screen width and the Looks controls disappear, Also, there is a new panel below the Mask panel that seems to have no purpose that I can find. The documentation says "Mask and Look panels - Th

CS6 problem. When I open the Mask panel, it takes up the entire screen width and the Looks controls disappear, Also, there is a new panel below the Mask panel that seems to have no purpose that I can find. The documentation says "Mask and Look panels - The Mask panel is now placed next to the Look panel. WIth the masking and grading tools placed side-by-side, you can now work faster on the mask workflow." Is there a way to move, hide, or otherwise manipulate the panels for a custom layout? All the examples I can find on the Web show the Looks panel to the left of the Mask panel where the controls are available.

Ok, here is what I have so far. Appdelete the iWork and reinstalled. Pages and Number work, but not Keynote.
Now, I downloaded a couple apps that I need, and no matter what I did, the spinning ball came up and the download stopped till it unlocked itself. It is really frustrating because the download was not completed and whatever came through would not mount. Could this issue be the internet connection? Permission fix showed a lot of Airport issues. I will try to run permissions fix again.

When I go to a link all is fine except the link takes up the entire screen and there is no way to move out other than control alternate delete and brining up task manager to exit out of firefox, help

again, I am able to use search of firefox to get to a link but then all the tool bars from my operating system are no longer available as the link takes up the entire screen (there are no firefox toolbards either so I can't shrink the page etc).. Thus I cannot move around and am stuck with no option but control alt delete to get to task manager to close firefox.

Thank you so much...
1. I don't have that fat format I checked as I saw this on another answer...BUT...you are right the project was very bloated and I made a new project with the sequence and moved a bunch of projects off to an outside drive and things are flying again...this effect "twirl" was on three clips and this seemed to be creating a problem along with it being a bloated project. Don't know why this effect renders easily then the next second doesn't it's on three clips on the entire project and one or another might not render all of a sudden.
2. I understand what you said about the timeline export...I decided to export the sequence without the matte it was nested in and that sequence did have the chapter markers on the timeline and they again didn't export??? I'll look tomorrow at this it makes no sense if what you're saying is how to do it...the final cut pro book said they should have showed up if I export from the browser and that didn't work either.
3. I then matted that output and rendered it to output but I am worried this will degrade and compress the sequence more than I want by outputting the same sequence with current settings twice???...the couple of outputs I could make nested looked very good as this was one render...however, I tried doing a quicktime "current settings" with the dvd studio pro info still trying to export chapter markers and maybe it's my imagination but the output didn't look as sharp as just an output with just chapter markers???
r. I did look at the final cut pro book and it says that mpeg 2 movies will not read chapter markers anyway if you create one in compressor...if this is true it makes no difference if the quicktime output isn't having chapter markers show up. I assume when I go to author though I can put an mpeg 2 movie into dvd studio pro and create chapter markers at that point!! It seems weird it says it can do it with an mpeg 1 but not an mpeg 2 when everyone is using that for dvds.

I'm reading a pdf in ibook and it takes up the whole screen so I can't manage it... what am I doing wrong?

I'm reading a pdf in ibook and it takes up the whole screen so I can't manage it... what am I doing wrong?

its ok now...

After updating to iOS5, browsing (playing) music on the lock screen has gotten really slow, has anyone else had this problem?

As the title states, browsing music while playing it on the lock screen has really slowed down, while it used to zap to another song quite instantly it now takes about one, sometimes two seconds to do so. Did iOS 5 cause this? Will it be fixed? Any other explenations?

I rarely record automation, and when I do I never do a second pass (usually hand draw automation in) but I have had problems with Logic 7 no longer playing back automation. I've been told its fixed in Logic 8, but in the mean time here is a work around.
Select the region where the automation is (if there is no region, create one using the pencil tool and expand it to cover all automation) and go OPTIONS menu -> TRACK AUTOMATION -> "Move current track data to region data." Now everything should play back as expected. If you want to edit the data, simply select "move current region data to track data" and edit away.
For some reason, Logic 7 will sometimes stop reading track automation data, but I have yet to have it stop reading region automation. This is a bug, and according to other users, has been fixed in Logic 8. Hope this helps until we eventually upgrade

I'm getting a pinkish-orange haze over the entire screen--HELP!!!

When using Safari, a very strange situation occurs periodically. As the title says, a semi-opaque pinkish-orange haze covers the screen; if more than one window is open, they all shrink approx. 30%-50% and appear side by side. When I click on any one of them, the haze disappears and they return to normal size and position. This Mac is new as of July '08.
This can occur once a session, but it can happen every 30 seconds. Once, and only once, it locked into a cycle of this every 5 seconds while making a chiming sound. I could not shut my Mac down the normal way, or even by pressing the power switch and holding it down. I had to unplug the power cord to shut it off. I waited until the next day to turn my Mac back on, and everything was normal for a while.
But the haze is occurring more and more frequently, and I'm worried. I've tried booting into the Diagnostic and running both long and short hardware tests. Everything came back normal. I also downloaded Onyx and did the maintenance and cleaning functions. The haze still appears.
I'm at a total loss. Any advice? Thanks in advance.

Trash your preferences for Safari.
Navigate to your user folder -> Library -> Preferences
then look for com.apple.safari.plist
trash that.
It should reset your Safari to its original state.
I'll have to think of what else it could be, though...
Do you notice it when visiting the same sites, or just in general browsing anything?
By 3rd party extensions, I'm referring to stuff for your mac, not safari, like anything by Unsanity (windowshade?) -- anything that manages the way your machine shows windows.

REST url to get titles and description for all the lists in HOST WEB.

What should be the REST url to get specific prperties for all the list in host web for SharePoint Hosted Apps.

Hi,
We can use the REST URI below:
http://myAppweburl/_api/web/lists?$select=Title,Description
More information:
How to: Complete basic operations using SharePoint 2013 REST endpoints
http://msdn.microsoft.com/en-us/library/office/jj164022(v=office.15).aspx
Best Regards
Dennis Guo
TechNet Community Support

Since I did the recent firefox update the it takes up the entire screen and I can see nothing on top or bottom and my screen controls do not help this. What can I do?

There are no more details to give.

Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F).<br />
If you are in full screen mode then hover the mouse to the top to make the Navigation Toolbar and Tab bar appear.<br />
You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11.<br />

Why do all my photos (but one!) not take up the entire touch screen?

I've been trying to figure this out for some time with no luck.
I have a very nice DSLR camera but I tend to use all the preset buttons. My photos always show up as a "square" shape when using things like the Apple TV photo display and on the ipod touch.
Recently we spent 3 weeks at the beach and I changed no settings on the camera during that trip. One photo out of almost 400 taken is more "rectangular" such that when I flip my ipod touch, this photo will change and take up the entire screen with no black edges. All of the other photos have blank edges/square shape.
My old cheap Kodak digital camera takes up the entire screen with all photos on the touch and the ATV. A friend shot some photos and his takes up the entire screen as well. Mine are always square, except for this odd one.
When I "get info" in iphoto, a sample of about 10 photos from this bunch from the beach show size 2032 x 1354, if that matters.
Any info?
Thanks.
More info: Looking through the photos, I noticed there was a change in the settings during the trip as there is a point where all the photos take up the entire screen. I don't know how to check the settings that were in place but the difference is:
Square shape: size: 3200 x 2400, and about 1.1 MB per photo.
Rectangular shape: size 2032 x 1354 at about 446 KB per photo.
I'm a novice at the particulars behind the photos but I'd like a good quality picture that isn't square but rather takes up the entire screen.
Message was edited by: Clayton Rhoades

David,
Thanks for the note. I looked up online and you are correct...the aspect ratio for my camera is indeed 4:3. I see in my camera settings where I can change the size of the photos but I've played around with that stuff and seen no difference in the aspect ratio.
I guess I'm stuck with what I've got?
I tried converting some of them with iphoto to a different aspect ratio and I don't think that's possible either.
Thx.

Hallo ,why is it that when I delete a photo ,which is backed up by time machine and western digital external hard drive , that I am able to restore the photo okay but not the titles and descriptions . I have a Macbook 4.1, mac osx 10.5.8 . Iphoto 7.1.5 ,

QUESTION.
Hallo , my question is ;whenever I delete a photo and restore it through Time machine and Western digital external hard drive , I am able to restore the photo but not the titles and descriptions . Western Digital inform me that it isn't their external hard drive problem and suggest that it is an Apple software problem ?
I am using a Macbook 4.1 , with Mac OSX 10.5.8 . I photo 7.1.5 , last modifie4d 01/05/2010 -universal . Should I be upgrading Iphoto ?
I hope that someone is able to help in this matter , as i have to restore 12000 photos !
Thanking you in anticipation.
Alan from Wigton

Hallo Kieth ,
I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
Thanks for your interest and advice.
regards - Alan

How to fix BC blog post meta title and description

BC blog post <title> and <description> shows (seo) from sidebar/post list - But does not show in blog post page thru site menu nav.
The blog post title and description show up corectelly when clicking on sidebar list of posts.
It must be using the module layout list.html which I have set up with:
<html>
    <head>
    <title>{tag_blogpostmetatitle}</title>
        <meta name="description" content="{tag_blogpostmetadescription}">
    </head>
    <body>
On the sidebar/post list
Title and Description show correctly here:
https://cameocoinsonline.worldsecuresystems.com/cameo-coins-blog/how-to-buy-and-sell-gold- and-silver-bullion
The problem is:
when clicking on menu nav to “blog” it does not show correct title and description.
From the blog page thru menu nav
Title and Description do not show correctly here:
It shows the name of the blog (cameo coins blog) instead of the name to the post.
https://cameocoinsonline.worldsecuresystems.com/cameo-coins-blog
Please Advise
Thank You

Hey there,
Firstly, putting blog posts meta title in the list layout is really bad - You do not do this. This is not how meta works and you need to understand a bit more about what it is.
If you have a list of blog posts on a page all with lots of title and meta BC will do one of two things.
1. Use the very last title and meta it sees rendered on all the layouts/templates/page it sees
2. Render the last title and spit out multiple meta's
Meta implementation is for the detail layout of something like a blog only - The single rendered content - 1 title, 1 meta description. For your blog this will ONLY go in the blog detail layout.
And in that layout at the bottom of it..
    <head>
    <title>{tag_blogpostmetatitle}</title>
        <meta name="description" content="{tag_blogpostmetadescription}">
    </head>
You need to understand that, remove it from others to fix up that issue with what your doing first. Very likely because you probably have this in other list layotus and all over the place your seeing inconstant output, address this and you probably will actually find your issue fixed.

Add unique title and description to other Blog pages

Hi,
There's a few pages that I cannot work out how to add a unique title and description tag within the Blog.
These are:
The page numbers - in the footer of the Blog if you click page 2, 3, 4, etc
eg: http://www.cardiotech.com.au/_blog/Latest_Fitness_News/page/4/
The Tags pages - if you click a tag and you're then presented with a list of articles for that tag it still displays the default Blog title
eg: http://www.cardiotech.com.au/_blog/Latest_Fitness_News/tag/Exercise/
The Archives pages - if you click on a month under Archives and it displays all the articles for that month it displays the default Blog title
I just need to know where this template is or even if there is one?
Hope this makes sense.
Thanks,
Rob

Hey there.
You can not edit/add unique titles for these.
As a note I can see you still have _blog - You can enable the proper SEO Custom url now and it probably says so in a yellow box on the detail part of the blog.

After update, Podcast Title and Description takes over the entire screen

Similar Messages

Maybe you are looking for