After update software (Curve 8520) sudoku and solitaire games have disappeared.

The original software came bundled with Sudoku and Solitaire but after updating the software both games disappeared. Where can I find them again?

I'm having the same problem, but there's more apps than that missing for me, and I'm betting for you. I updated my software version on my 8530 Curve - Sprint, currently have v5.0.0.1030. When I did this update I lost Password Keeper, tasks, memo pad, my games, and I think a couple other things. The main thing I NEED back is password keeper, for obvious reasons. Every "solution" people are offering has not worked. I tried reloading the software again, I tried going through the BB Desktop Software and going to Applications but there's no other applications to load. I tried doing some loader run command but there was nothing there to load, I went to the BB web page and downloaded software, went to my carriers page for the softwate, still no apps for me to put on my phone and again tried reloading software after downloading new stuff. If I find a solution I will let you know.
Well Behaved Women Rarely Make History

Similar Messages

After updating software on IPAD from computer says I have to reset IPAD to factory default and will lose all data???

After updading software on IPAD2 tells me I have to reset to factory default and will lose all data

Kinda.
Read the following in its entirty before doing anything.
Note that a "Restore" could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

How do you update my ipod, it is 4th generation, it does not have update software in general section, and do i have to have my ipod involved in the process of updating it?

how to update ipod touch 4g w/o using ipod 4g

To update
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad
A 4G to 6 Requires iTunes version 10.7 or later

Updated itunes to the newest and all apps have disappeared

ive recenty update itunes to the latest version and i connected my ipod with itunes , then my apps were all gone and i dont want to buy my games again , so that just means ive lost some money and itunes seems to be crashing all the time i try to download back my apps. what do i do?

The error message I am receiving is:
iTunes.exe - System error.
The programs can't start because MSVCR80.dll is missing from your computer.
Try reinstalling the program to fix this problem.
(Which I have done.)
Next error message is:
iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126)

All my check boxes and selection circles have disappeared. Uninstalled FF and reinstalled deleting all plug-ins, settings, and etc. IE works fine. What's messing with my boxes?

With recent update, all my check boxes and selection circles have disappeared. I tried to uninstall FF, reinstall, but nothing fixed it. When I run safe-mode, it's fine, but then no youtube or other internet fun stuff. Tried to update plug-ins but still all jacked up. any ideas? also, my side scroll bar screws up too.

Do you mean Firefox safe mode or Windows Safe mode?
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
If you mean Windows Safe-mode then check your security software.

Repairing permissions before and after updating software

What is the reason to repair permissions before and after updating software? This may sound like a stupid question to many of you, but I am new to computers and I am trying to learn how and why of some of the things of my PowerBook. I installed some updates without repairing permissions. Did I install some software updates the wrong way? Thank you.

This is a topic which will draw as many emphatic for and against responses as overnight shut down or not, defrag or not, optimise or not, and so on.
I agree with Neil. I believe that OS X has progressed sufficiently that repair permissions has become redundant and so I do not do it on any regular basis.
Some folk may refer you to an Apple Support Article 303602. That Article in its 4 May 2006 version, titled "Top 10 Tips to Keep Your Mac in Top Form" suggested Repair Permissions should be done "after upgrading or installing new software". The Article was however revised on 15 May 2006 to be titled "Top Tips to Keep Your Mac in Top Form" and the item on Repair Permissions [along with two other recommended maintenance tips] was removed. It is my view that the conclusion to be drawn here is that Apple no longer considers Repair Permissions to be a required maintenance procedure.
Many users have adopted a "Repair Permissions" mantra for a cure-all over several years. I dropped it sometime in 10.3.
But, to each his own.
HTH
TiPB 867 Mac OS X (10.4.6)

After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer.

After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 4
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit
Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

After updating software, apple tv no longer accesses mob.tv and wsj

After updating software, my apple tv no longer accesses MLB.TV and the WSJ. It shows a spinning icon, sas accesing mlb., but never finishes.
This happened once before with an upgrade and the solution was to update using a USB wire. I took the apple tv to the store, and they did this (or they said they did), but the wired connection to MLB NO LONGER WORKS. It will work as a wi fi, but will not work with wire. Help! How can I get mlb back p and running for the 5 days of the year I want it most.

Is your Apple TV correctly connected to the network (check you don't have an IP address that staqrts with 169)
Have you checked homesharing is still set up properly, what about your computer firewall, is set to allow access for iTunes, you might try turning it off too.

How do i get my favorites back after updating software on IPad?

How do I get my favorites back after updating software on Ipad? It asked to back up and restore which I did but now I cant find the favorites. Any suggestions.

Hi,
Do you mean the Messages icon has disappeared from your DOCK on your Mac ?
Or do you mean that Messages does not appear in your Applications folder either ?
Or do you mean that in Messages Menu > Preference > Accounts the iMessages account is not Logged in ?
9:59 pm Thursday; October 24, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

HT4101 After updating software on the iPad to latest iOS version the iPad no longer supports the USb on my camera conector kit

After updating software on iPad it no longer recognises my USB on camera adapter kit

What happen if you ignore error message and connect your camera to it?

After updating software on my Apple TV it is asking to connect to iTunes. Can't understand why?

After updating software on my Apple TV it is asking to connect to iTunes. Can't understand why?

You can try borrowing one. These cables are common for Android, Kindle etc. users.
Here are some steps and notes to try:
MANY people are reporting they've had to try multiple micro USB cables to find one that works. I got one that worked from a neighbor.
For clarification, this needs to be a "micro" USB, not a "mini" USB
Some people have also reported they've had to try the Restore process more than once.
1. Unplug Apple TV and move it to your computer running latest version of iTunes.
2. Quit iTunes if running.
3. Plug micro USB cable to the back of the Apple TV.
4. Power the Apple TV using the AC cable.
5. iTunes shoud either launch itself (a good indication that the micro USB cable you're using is compatible), or launch iTunes.
6. Click Restore. Software will download and install (big file).

TS3276 After updating software yesterday, noticed that sent emails are not showing up in Sent Folder for one of my accounts.

After updating software yesterday, noticed that sent emails are not showing up in Sent Folder?

Are you storing Drafts, Sent, Trash and Junk messages on the server via your .Mac account with Mail?
If so, do you access your .Mac account with an email client on another computer or regularly access your account via webmail on another computer?
If not, any other reason you need to store Drafts and Sent messages on the server?
While composing a message with Mail, it is temporarily saved in the account's Drafts mailbox so sounds like something went wrong with the process between finishing and sending the message with Drafts and Sent being stored on the server.
If you don't have any need for this, better to store Drafts and Sent messages locally on the hard drive with Mail.

My iphone 5c crashed after updating to IOS 8.02 and now i don't have anything from the last 3 months. What do I do?

My iphone 5c crashed after updating to IOS 8.02 and now i don't have anything from the last 3 months. What do I do?

Don't worry about that. iPhone stuck in recovery mode always happens when you update the iOS on your iPhone. There are two ways to solve it.
First is is to put your iPhone in DFU mode.
Step 1. Turn off iPhone
Step 2. Hold down the Power and Home button.
Step 3. When you see the Apple logo, release the power button but continue holding the Home button down.
Step 4. Open iTunes and wait for it to tell you that it’s in restore mode.
If DFU mode can't solve the problem, I'm afraid the only solution is to try some 3rd party software, like iPhone data recovery or something like that. You may simply try the tutorial here: How to Fix iPhone that is Stuck in Recovery Mode.

The battery of my iPad four drawn very fast after update to iOS 8.1 and the sensitivity of my iPad decrease until I cannot swipe it and is very lag please fix it immediately

The battery of my iPad four drawn very fast after update to iOS 8.1 and the sensitivity of my iPad decrease until I cannot swipe it and is very lag >< please fix it immediately

Hello alicelan,
After reviewing your post, I have located an article that can help with device errors. You may want to consider restoring your device to factory settings to resolve the issues you've described:
Use iTunes to restore your iOS device to factory settings
Restoring iOS software deletes all your data and content from your device, including songs, videos, contacts, photos, and calendar info.
Before you restore your device
Make sure you’re using the latest version of iTunes.
Use iTunes to back up your device. Transfer and sync any additional content to your computer.
Turn off Find My iPhone in Settings > iCloud on your device to disable Activation Lock.
Restore your iOS device
Connect your iOS device to your computer using the cable that came with it.
Select your iPhone, iPad, or iPod touch when it appears in iTunes. In the Summary panel, click Restore.
Click Restore again to confirm that you want to restore your device to factory settings and delete all data and content. iTunes will download the iOS software file and restore your iOS device.
After your iOS device is restored to factory settings, it will restart. Once it does, you’ll see the "Slide to set up” welcome screen. Follow the steps in the iOS Setup Assistant. You can set up your device as new or using a previous backup. If your iOS device has cellular service, it will activate after you restore.
Learn more
If you get an error message, find out how to fix most update and restore errors.
If your iOS device with cellular service doesn’t activate after restoring, find out how to fix activation issues.
If your iOS device restarts repeatedly or isn’t responding, for example if you see a stopped progress bar or no progress bar, put the device into recovery mode and restore it again.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

All contacts lost after updating software, incl. icloud

After having updated software on my iPhone in Settings I have lost all my contacts in my iPhone.
I got iCloud installed as part of the updte and after that I have no access.
When I log into iCloud there are no contacts either.
What to do?

Hi shage
Welcome to the Community
Do have media card installed in your device, Please try this Open BBM - Press the Menu key - Options - Scroll down to Backup Managment - Then Click Restore .If you have any previous Backup you will get your contacts back.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

After update software (Curve 8520) sudoku and solitaire games have disappeared.

Similar Messages

Maybe you are looking for