After update software freezes and other troubles

I installed the latest update from apple little over a week ago. I also started having these issues about the same time:
I`ll just list my problems:
-Firefox, Adobe CS5, Preview, Adobe Reader, iTunes and just about any other program freezes or crashes frequently. Several times a day, even several times a session.
-When I try searching for downloads/updates, updater crashes.
-When I open a pdf I have recently created myself, it shows just fine. When I try to open a pdf I have downloaded, the program crashes (so far I have tried iPhoto, preview and adobe reader). The last time I know* this worked was in late December, around new years.
-My cursor has turned sloppy, dropping objects or just disappearing. This applies to both the mouse and my tablet.
-Everything runs super slow.
I did a full backup and housecleaning routine in mid December, so there is ample space on the disk and everything was working ship-shape until after that download.
It might be coincidence, but at least the dates are matching up.
I have tried to reboot, I have tried to give it a nights rest and I have tried to boot in "safe-mode". So far nothing helps.
Any pointers, suggestions and help at all is deeply appreciated!

After reading through the forum I also tried to download and install the 10.6.6 combo, but I am unable to open it. on the plus side: now I get an error code! -10822.
On the down side: I have no idea what this (or any) error code means!
Any tips?

Similar Messages

  • After update - iTunes freezes and needs a force quit when I plug in any device!

    I recently update to OS X Yosemite and I also updated my iTunes to 12.1 - but now every time I plug in my iPhone 6 or my iPad mini, my iTunes freezes and I have to force quit. So now I can't even plug in and sync my devices or update them or do anything!
    Help? Anyone?

    Anybody have any idea how to fix this? Or anything similar happening to you?

  • Help BB not working after update (software proprietary and confidential to research in motion limited)

    I have recently updated my curve 9300 and before it was working verywell.
    So oke now that i have updated the phone i tried to boot up, it boots up like these pictures
     security test pass 100%
    and then i get this message and then i cant do anything, nothing is woking cant even scroll down.
    Does anyone know what to do??
    i have did the update a couple times again with no luck so far, even did a downgrade but still the same message!
    Thanks fella's !!!!!

    Hi and Welcome to the Community!
    The last image...you need to scroll down that screen until the buttons appear allowing you to proceed. The tiny little blue down-pointed triangle at the bottom right of the screen indicates there is more to display, and you simply need to scroll down.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Repairing permissions before and after updating software

    What is the reason to repair permissions before and after updating software? This may sound like a stupid question to many of you, but I am new to computers and I am trying to learn how and why of some of the things of my PowerBook. I installed some updates without repairing permissions. Did I install some software updates the wrong way? Thank you.

    This is a topic which will draw as many emphatic for and against responses as overnight shut down or not, defrag or not, optimise or not, and so on.
    I agree with Neil. I believe that OS X has progressed sufficiently that repair permissions has become redundant and so I do not do it on any regular basis.
    Some folk may refer you to an Apple Support Article 303602. That Article in its 4 May 2006 version, titled "Top 10 Tips to Keep Your Mac in Top Form" suggested Repair Permissions should be done "after upgrading or installing new software". The Article was however revised on 15 May 2006 to be titled "Top Tips to Keep Your Mac in Top Form" and the item on Repair Permissions [along with two other recommended maintenance tips] was removed. It is my view that the conclusion to be drawn here is that Apple no longer considers Repair Permissions to be a required maintenance procedure.
    Many users have adopted a "Repair Permissions" mantra for a cure-all over several years. I dropped it sometime in 10.3.
    But, to each his own.
    HTH
    TiPB 867   Mac OS X (10.4.6)  

  • After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer.

    After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
    capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.  
    These steps are to be taken while booted in safe mode.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below to select it:
    for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3 
    Repeat with this line:
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 4
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit 
    Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • After updating software, apple tv no longer accesses mob.tv and wsj

    After updating software, my apple tv no longer accesses MLB.TV and the WSJ.  It shows a spinning icon, sas accesing mlb., but never finishes.
    This happened once before with an upgrade and the solution was to update using a USB wire.  I took the apple tv to the store, and they did this (or they said they did), but the wired connection to MLB NO LONGER WORKS.  It will work as a wi fi, but will not work with wire.  Help!  How can I get mlb back p and running for the 5 days of the year I want it most.

    Is your Apple TV correctly connected to the network (check you don't have an IP address that staqrts with 169)
    Have you checked homesharing is still set up properly, what about your computer firewall, is set to allow access for iTunes, you might try turning it off too.

  • Ok so i'm trying to restore my iPod but every time at a certain point the iPod software update would freeze and says to make sure i'm connected to the internet and I am. Help me please

    Ok so i'm trying to restore my iPod but every time at a certain point the iPod software update would freeze and says to make sure i'm connected to the internet and I am. Help me please

    Let's try the following document with that one.
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    (If the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK.)

  • QT 7.1.6 freezing and other problems

    Hello everybody,
    I continue to see postings relating to QT freezing while audio still plays and various work arounds people have come up with.
    Please remember to call Apple and report the problem. The more people that call and get a case number (yes, that is important) the more Apple will become aware of how widespread the problem is.
    While Apple hosts these discussion forums it does not necessarily mean they are aware of the problems we are having and discussing.
    I wrote down all the troubleshooting I did so I did not forget anything when I called Apple and reported my problem with iMovie after updating my system and QT. I was immediately given a case number and have been in contact with product specialists. Initally they thought it was the Security Patch but I quickly zeroed in on QT 7.1.6 as my problem. I finally did an Archive and Install and updated all software except Security Patch 2007-004 v1.1 and QuickTime 7.1.6. I downloaded and installed QuickTime 7.1.5. My system is functioning very well now.
    Sue
    iMac G5 20 inch   Mac OS X (10.4.9)  

    It might not be widespread and I never said it represented a majority of people but there is enough chatter to indicate a problem more widespread than just me.
    I just wanted to alert people that the best way to inform Apple of a problem is to call them and get a case number. When I worked for education my SE always reminded me to call Apple and not just report a problem to him.
    Just because you had no problem doesn't mean that everyone else who has a problem did not install correctly. I worked with Apple to zero into the QT 7.1.6 upgrade. I would never have seen the problem except I decided to do an iMovie project and that showed up the video freeze.
    Sue

  • How do i get my favorites back after updating software on IPad?

    How do I get my favorites back after updating software on Ipad? It asked to back up and restore which I did but now I cant find the favorites. Any suggestions.

    Hi,
    Do you mean the Messages icon has disappeared from your DOCK on your Mac ?
    Or do you mean that Messages does not appear in your Applications folder either ?
    Or do you mean that in Messages Menu > Preference > Accounts the iMessages account is not Logged in ?
    9:59 pm      Thursday; October 24, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • HT4101 After updating software on the iPad to latest iOS version the iPad no longer supports the USb on my camera conector kit

    After updating software on iPad it no longer recognises my USB on camera adapter kit

    What happen if you ignore error message and connect your camera to it?

  • After updating software on my Apple TV it is asking to connect to iTunes. Can't understand why?

    After updating software on my Apple TV it is asking to connect to iTunes. Can't understand why?

    You can try borrowing one. These cables are common for Android, Kindle etc. users.
    Here are some steps and notes to try:
    MANY people are reporting they've had to try multiple micro USB cables to find one that works. I got one that worked from a neighbor.
    For clarification, this needs to be a "micro" USB, not a "mini" USB
    Some people have also reported they've had to try the Restore process more than once.
    1. Unplug Apple TV and move it to your computer running latest version of iTunes.
    2. Quit iTunes if running.
    3. Plug micro USB cable to the back of the Apple TV.
    4. Power the Apple TV using  the AC cable.
    5. iTunes shoud either launch itself (a good indication that the micro USB cable you're using is compatible), or launch iTunes.
    6. Click Restore. Software will download and install (big file).

  • TS3276 After updating software yesterday, noticed that sent emails are not showing up in Sent Folder for one of my accounts.

    After updating software yesterday, noticed that sent emails are not showing up in Sent Folder?

    Are you storing Drafts, Sent, Trash and Junk messages on the server via your .Mac account with Mail?
    If so, do you access your .Mac account with an email client on another computer or regularly access your account via webmail on another computer?
    If not, any other reason you need to store Drafts and Sent messages on the server?
    While composing a message with Mail, it is temporarily saved in the account's Drafts mailbox so sounds like something went wrong with the process between finishing and sending the message with Drafts and Sent being stored on the server.
    If you don't have any need for this, better to store Drafts and Sent messages locally on the hard drive with Mail.

  • Slow after updated software

    After updating software, Maverick 10.9.4, on my Mac, it is very slow especially opening apps. Any recommendations?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • HT201210 how to activate iphone 4 after updating software to IOS 6?

    how to activate iphone 4 after updating software to IOS 6?
    please help..

    Your friend did an unofficial unlock and it has now locked back to the original cell carrier. You need to call AppleCare, give them the model and serial number of the iPhone and find out which cell carrier it is locked to. Then contact that cell carrier and see what the process is to officially unlock the iPhone and if you qualify.

  • Iphone 4 factory unlocked turned to locked after updating software from 4.3 to 4.3.3, any help?

    Iphone 4 factory unlocked turned to locked after updating software from 4.3 to 4.3.3, any help?

    the store dosnt  unlock the phones ,they buy  and sell refurbished phones. when I got THE phone the ios on it was 4.1.2. . It seems they have not used this phone .I called  apple techincal suppor.the said it has hardware problem !

Maybe you are looking for