After update, startup crashes (Can I update without this happening?)

Well, after downloading and beginning the update for Mavericks, the computer began it's first restart, and upon starting up, this happened even before the Apple logo appeared:
So I did a system restore to 10.7.5 to save the computer (repairing disk and permissions first, so as not to lose any data).
I NEED to update to Mavericks because I can't download the new Xcode until then (and for non-xcode users, it's the program for creating apps, and I need to update mine).
So, anyone know what happened? Any suggestions on how to fix it to be able to update to Mavericks without issue? Is it possible that by doing the disk and permissions repair, I may have solved the issue already?

Danegraphics wrote:
Well, I found the answer after a few attempts. I discovered that when the screen freezes on the start up, INSTEAD of restoring the computer first then retrying the install, I should simply start the freezing computer (mid-Mavericks install) and hold Option+Cmd+P+R  from the time it turns on until the second start chime sound. Once the second chime passed, I released, and my mac finished it's install. Hope this helps someone else.
well, i think i was pretty clear
things you want to try before re-installing Mavericks (if you get for example the "popular" gray screen and nothing happens) is to perform a safe boot and/or reset the NVRAM / PRAM (which is what you did by option+cmd+p+r and waiting the second chime)
sorry i wasn't clear enough and if that made you loose time

Similar Messages

  • TS1369 After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

    After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

    I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
    Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch.

  • HT1222 My Facebook was hacked and as I only access it through my iPhone 4 or my iPad is there any other security measures I can take to prevent this happening. I have the latest software updates.

    My Facebook was hacked and as I only access it through my iPhone 4 or my iPad is there any other security measures I can take to prevent this happening. I have the latest software updates.

    Facebook security is handled by Facebook, not the phone or Apple.  Contact them.

  • Bridge: when I want to export from .psd to .jpeg the export window opens but the target (Ziel) window is empty, thus no target can be selected. This happens since a brigde shut down after "out of memory"

    Bridge: when I want to export from .psd to .jpeg the export window opens but the target (Ziel) window is empty, thus no target can be selected. This happens since a brigde shut down after "out of memory"
    Felix

    Not quite following your terminology.
    Möchten Sie es vielleicht mal auf Deutsch versuchen?

  • TS1440 If I don't have my startup discs can I not fix this myself?

    My iMac starts up with a flashing question mark within a folder. I've seen many threads about this issue but my question is, if I don't have my startup discs can I not fix this myself?

    Do you know if you had Firmware Password protection setup?
    http://support.apple.com/kb/HT1352
    It would block usage of all the startup keys, like C, N, T, D, CMD+s, CMD+Option+p+r, CMD +v, Option, and Shift, as well as booting from anything but the Hard Drive.
    Force Removing Password Protection
    1) Add or remove DIMMs to change the total amount of RAM in the computer.
    2) Then, the PRAM must be reset 3 times. (Command + Option + P + R).
    http://www.securemac.com/openfirmwarepasswordprotection.php
    Oh, is this a wired USB KB?

  • On my mac I have both Quicktime X and Quicktime 7 pro. Both applications seem to be crashing quite often lately. This happens when playing all files types. I notice it more with .flv file. It usually happens when i grab the time slider bar and try to move

    On my mac I have both Quicktime X and Quicktime 7 pro. Both applications seem to be crashing quite often lately. This happens when playing all files types. I notice it more with .flv file. It usually happens when i grab the time slider bar and try to move it. The apps will freeze and I have to "force quit" to get them to close. Sometimes putting the computer to sleep and waking it up helps. Is there a way to remedy this?

    Oops, I needed to update my profile. I have snow leopard now

  • HT1338 I connected a HDMI cord to my macbook from my TV and I mirrored it so I can see my macbook on my TV but the sound wont transfer to my TV, How can I do make this happen? PLZ help, Thank you

    I connected a HDMI cord to my macbook from my TV and I mirrored it so I can see my macbook on my TV but the sound wont transfer to my TV, How can I do make this happen? PLZ help, Thank you

    What model and year is your MacBook?  Some older MacBooks don't support Audio out via miniport/HDMI (the display miniport is video only).

  • TS3274 My iPad is "frozen" ...graphic of charger cord with an arrow pointing to the iTunes logo.  I was updating the latest iOS update and this happened.   Please help.

    My iPad is. "Frozen"...   Graphic of charger cord connector with an arrow pointing to the iTunes logo.  This happened when I was updating iOS software.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • When i'm watching a show or movie on iTunes, the video will randomly freeze and the audio will continue, the video catches up after awhile, but it does it again. This happens to all my shows, and I downloaded them from iTunes. Why is this happening?

    Whenever I try to watch movies on iTunes on my computer, the video will randomly freeze, but the audio will continue. This happens will all of my shows, however this never happens on my iPod or iPad. Whenever I want to watch a new movie I buy or any of my shows this problem keeps happening. I have tried uninstalling and reinstalling and it did not work. Why does this problem keep happening, and how can I fix it? Thank you.

    John0618. Did you ever get a response or solution to problem?  I have the same problem (starting about three months ago). 

  • IPad Personal Hotspot antenna shuts off after a few minutes of non-use. This happens in both Verizon 3G and LTE areas. Turning off LTE does not help. Turning Personal Hotspot off and then on works. Does this happen on Mini and Retina?

    iPad--third generation shuts off antenna/hotspot after a few minutes of non-use.
    Happens in 3G and LTE VZ environment.
    Turning hotspot off and on getsw things working again.
    Does Apple have antenna on a timer so it shuts off after a few minutes?
    Does this happen on Mini and Retina as well?
    FLAGSTAFFLAR

    Fixed!
    Two things together have restored connectivity.
    1.  I changed the name under Settings > General > About > Name from My Name's iPad to iPad of My Name.  I read somewhere that iOS 7.0.1 or 7.0.2 (I forget which) sometimes had issues with apostrophes here.  Easy enough to test.
    2.  I then reset (again) the APN settings under Settings > Cellular Data > APN Settings > Personal Hotspot and reentered our provider's info (APN, Username, Password) there.
    I don't know WHY it worked, but the personal hotspot is now happily sharing (again) internet connectivity with my MacBook Pro.

  • HT4623 why cant i continue my phone usage after updating without a sim card

    why cant i continue using my iphone 4 after an update with out having a sim card

    I'm not sure what you mean. You can't use any cellphone without a SIM (except for CDMA phones which don't use SIMs at all). What is your exact situation? Do you mean that you have been using your iPhone as an iPod and now after the update it's requiring activation? If that's what you mean, then you will need a valid SIM, for the cell carrier your iPhone is locked to if it is locked, so you can re-activate the iPhone. You don't need active service with the carrier, though.
    If that's not what you mean, please post back and explain further.
    Regards.

  • Battery drain after updating what's happening?

    Guys I just updated the is and my battery goes from 100% to 4% in 2 hours with normal usage. The helpline just says lower brightness and the dealer says close wifi but what the **** is one to do its supposed to be a state of the art machine should one dump it or what?

    Im really shocked this forum has so many similar posts and apples doing nothing about it. Why should i have to exchange a 1 month old phone we are spending close to a 1000 dollars for this crap you dont have this bs even in korean or cheap chinese phones. Arent there any consumer rights forums that can sue these guys?

  • After Photoshop CC crash, can no longer access extensions menu?

    Hello! I recently signed up for/installed the CC Suite and have been using it for a few days on my Windows 7 box. I had a bad PS crash this evening where when I tried to open PS back up, it seemed to think I was a new user and wanted me to sign in/reauthorize my machine. (I also had to use the cleaner/reinstall the incredibly glitchy CC Desktop client.) On top of that, I can no longer access the extensions menu in Photoshop, which is kind of a problem for me. :\ (It's greyed out.) Any ideas? Thanks!!

    Delete tthe OPM.db completely and sign in again, perhaps that makes CCApp recognise your credentials properly:
    Important Directories
    Mylenium

  • After updating Firefox this morning, I am now unable to attach files to my Mobile Me email account.

    When I try to attach a file to my outgoing email, it does not recognize when I click on the "paper clip" attachment button. No warning, no pop up window......just nothing happens.
    ''Locked as a duplicate of https://support.mozilla.com/en-US/questions/882976''

    Hi [email protected]
    It sounds like an issue with Firefox Sync. Here is an article on how to troubleshoot the issue:
    [[Firefox Sync is not working]]

  • I downloaded, installed and uninstalled firefox 24 yesterday but it had a search engine which I don't want, how can I download without this search engine.

    How can I download firefox without the search engine it automatically takes me to when I open a new tab.?

    its not search engine change homepage you like
    et a single website as your home page
    If you like to keep things simple, here’s how to set your home page in three easy steps.
    Open the website you want to set as your home page. If you want a blank home page, open a new tab.
    Click the icon to the left of the web address, drag it to the Home button, and release.
    Home page Win1
    Click Yes to set this as your home page.
    Try it out: Click the Home button and your new home page will load in the current tab. It doesn’t get much easier than that!
    Set more than one website as your home page
    This is the way to have one-click access to all of your favorite websites. For example, you can set the Firefox home button to open your email, favorite news site, and Facebook all at once.
    Open a new window and load the first web site you want in your home page.
    Click the new tab button and open the next web site. Repeat this step until you've opened all the desired sites in new tabs.
    At the top of the Firefox window, click on the Firefox button and then select Options
    Select the General panel.
    Click Use Current Pages.
    Home page Win2
    Click OK to close the Options window
    Try it out: Close all of your tabs and then click the Home button. Watch all of your chosen pages open up in tabs. Do it again! You know you want to.
    Note: Setting too many pages as your home page can make Firefox take long to start up.
    Restore the default home page
    If you want to delete your home page customizations, this is the way to do it.
    At the top of the Firefox window, click on the Firefox button and then select Options
    Select the General panel.
    In the Startup box, click Restore to Default.
    Home page Win3
    Click OK to close the Options window
    Set what pages open when Firefox starts
    This is a great feature you can use in addition to the home page settings. To save time, you can have Firefox open the pages you were visiting the last time you used it so you can continue where you left off.
    At the top of the Firefox window, click on the Firefox button and then select Options
    Select the General panel.
    In the Startup box, click the dropdown menu next to "When Firefox starts:" and select what Firefox should display when it starts up.
    Show my home page - Displays the home page(s).
    Show a blank page - Displays a blank page. This loads quickly since you don't have to wait for lots of tabs to load.
    Show my windows and tabs from last time - Opens the pages you were visiting the last time you used Firefox so you can continue where you left off. For more information, see Restore previous session - Configure when Firefox shows your most recent tabs and windows.
    Click OK to close the Options window .
    Try it out: If you really want to get fancy, you can set a group of web sites as your home page and set Firefox to open the pages you were visiting the last time you used it. That way, you can pick up your work where you left off and have one-click access to your favorite sites.
    Tying it all together
    Firefox is really flexible – "you" decide what works best. Keep it simple and set a single website as your home page or set up one-click access to your favorite web sites and save time by having Firefox pick up where you left off when it starts. What works best for you? Try and see!
    Having problems?
    We have answers:
    If you keep getting the "Firefox has just updated" tab every time Firefox starts, see the article Firefox says it's just updated every time it starts - how to fix.
    If your home page settings are not saved, see How to fix preferences that won't save.
    Share this article: http://mzl.la/NdLLhT

Maybe you are looking for

  • Error while running a job in Data services

    We are using Data services BO XI R3 tool. We have created datastore for Oracle database  8i using Microsoft ODBC DSN. This is the source datastore. When job is to pull the data from source to 10g target, we get the below error in log file: 25219     

  • Table used in report painter

    Hi, How to check what table is really used in a certain report painter. For my case, I want to a report 1KSL-001 under 1VK library, and I can see this 1VK library is using table "CCSS", but CCSS acctually is not a table, its just a structure. So, how

  • I bought the wrong thing

    ON my ipad apple said that adobe photoshop was free but is was 12.90... How do i get my money back!!!

  • Put URL of downloaded files in Get Info's Comments field?

    I'm using Safari Version 3.0.4 (build 5523.10.6). I know it is possible to have the url of where a file was originally downloaded to appear in the Get Info's comments field automaticly. I know this because it used to do this sometime ago, I remember.

  • I downloaded reader 11.0.02 in order to edit a pdf file.  The instructions i had were to select tool

    I downloaded reader 11.0.02 in order to edit a pdf file.  The instruction I had were to select "Tools", then click on "Content editing"  When I clicked Tools, "Content editing" was not an option!