After update the MacOSx V. 10.6.8, It can not start Parallels program

Last week, I updated the Mac OS X ver. 10.6.8, now I can not start Parallels. When I start Parallels, open a window that say "Unable to load the Parallels driver", "restart the Mac", and I put OK, after in other window say "Unable to start the virtual machine. Un unexpected error occurred while starting the virtual machine." How is it resolve this error?

reinstall Parallels Desktop after a restart.

Similar Messages

  • I have the IPhone 4 , after updating the software to version 5.0 , i can't edit my contacts, is it only from my device or the updated software should be adjusted?

    I have the IPhone 4 , after updating the software to version 5.0 , i can't edit my contacts anymore(the button edit doesn't exist anymore), is it only from my device or the updated software should be adjusted?

    That's exactly right.  And since you have a MacBook Air (as I do), that means the synching should occur just fine (if you've set it up right in iTunes).  In other words, once you actually do the update, the iTunes on your MacBook Air will re-sync your photos back to your iPhone.
    Basically, the process is that your iPhone gets backed up, wiped clean, then the new iOS version gets installed, then the backup gets restored.  That will restore everything in the article above, which does not include your photos.  But the sync process that happens after the iOS installation would restore your photos from iPhoto given you've set it up that way in iTunes.
    When you have your iPhone plugged into iTunes, while looking at the iPhone's summary page, click "Photos" on the right side of iTunes to see how you have your sync set up.
    Regardless, it sounds like you'll be fine!  Your photos will wind up in iPhoto once you place them there.  They will be safe there.

  • Hi, I am trying upgrade to Snow leopard 10.6.8 from 6.3(trying to install Lion). After downloading the software i m getting a message "can not install on the HD, install 6.5 before proceeding further. I coud not understand. Any suggestions, I appreciate.

    Hi, I am trying upgrade to Snow leopard 10.6.8 from 6.3(trying to install Lion). After downloading the software i m getting a message "can not install on the HD, install 6.5 before proceeding further. I coud not understand. Any suggestions, I appreciate.

    install 6.5 before proceeding further. I coud not understand.
    Just what it says - install os 10.6.5 before proceeding further.  You can either do so through Software Update or use the Combo update from Apple's download site.
    You should repair permissions and restart your computer prior to updating and upgrading.

  • Can not start a program after upgrade to version 5.0

    I upgrade the iphone to version 5.0 and after that I can not start any program installed exept for the program that come with the phone

    Ray,
    You might have been there but I would like to know are there any error footprints in the logs?
    eg.:
    on OVMM: */var/log/ovm-manager/*
    on OVM server: */var/log/xen/* && */var/log/ovs-agent/*
    --Dheeraj.                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • After updating the new ios in my iphone5, i can't use my phone because of the hardware as per the MAC specialist told me.

    I am currently using iphone5 and I updated it last Saturday (August 2, 2014) for the new ios. After a day, the problem came out wherein it is automatically turn off then when you open it, command errors are coming out. I tried to restore it using itunes but error is occurred during the restoration. The MAC specialist I consulted suggested me to trade in my phone but unfortunately I don't have any cash for it. Why is it like that, I just updated the new Ios then all of a sudden I can't use my phone at all... I hope Apple Company can help me, its not any misused problems but a hardware or technical one by Apple.

    Yes lucky me . If all troubleshooting has been done in Resolve iOS update and restore errors and if you have at least taken it into a store where they could try a restore themselves then that would suggest a hardware fault with the iPhone.
    If you are out of warranty then it is correct that they would quote you an out of warranty service fee. From here it would be a matter of trying the steps above and if you have already tried then doing the service when you do have the cash.

  • After install the new version web controller 0.9 , can not  authorization

    When i enter the password and username .Error message: server connectivity problem: there was a server hostname lookup failure.
    How can i fix it ? help...

    If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.
    * https://support.mozilla.com/kb/Installing+Firefox+on+Mac
    * http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X

  • I don't know what was wrong with the Weather in my iphone5? I can not open this program!!

    Dear All,
    I am so wonder with my iPhone about the app. Weather. I tried to open again and again but I can't still open this app.
    Pls kindly help to solve this problem and what I should do to process it..!

    try resetting the phone by holding the sleep/wake button and the home button until the phone restarts.

  • HT201210 error 3014, can't restore iPhone after updated the new version of itune

    after updated the new version of itunes, my iphone can't back up and restore.
    Why everytime update the new version of itunes have problem????

    See Network connection or download errors
    Error 1479: This error occurs when trying to contact Apple for an update or restore. Quit iTunes, disconnect from USB, restart the iOS device, reconnect the device to the computer, then launch iTunes and attempt to update or restore again.
    Error 1639: See this article for resolution.
    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good networ

  • After Updating my iPhone 3GS to iOS 6 i can't activate  it

    After updating my iPhone 3GS to iOS 6 i can not activate it.
    I tried several times, with the original sim and with another three different.
    What can i do?
    Before iOS 6 the iPhone was working perfectly.
    Thanks

    iKenne wrote:
    The original carrier was Rogers i bought it in Canada, but i used it in italy too with another sim card, without jailbreak.
    I think that after updating it has been re-locked, but it doesn't work with the original sim too.
    The message that i get on the iPhone is:
    "Impossible to activate iPhone because server are not avaiable..."
    On my Mac it say that i have to insert a valid sim card...
    If it was legitimately unlocked then updating it will not re-lock it. It will be re-locked only if it was unlocked by hacking it.
    That error message, however, does not mean it is locked. It means that iTunes could not verify the locked state because it could not communicate with Apple's activation database at gs.apple.com. There are common reasons that the server connection fails:
    1. Your router, antivirus or firewall is blocking access to gs.apple.com.
    2. You don't have a WiFi connection if you updated on the phone and not with a computer.
    3. If you updated using your computer and it was used to hack, unlock or jailbreak some iOS device in the past (not necessarily the iPhone with the problem) and the network database on the computer is corrupted.

  • After downloading itune to my dell computer (with windows vista), the DVD RW drive is disabled. The device status shows "device can not start (code 10)" Any suggestions? Thanks.

    after downloading itune to my dell computer (with windows vista), the DVD RW drive is disabled. The device status shows "device can not start (code 10)" Any suggestions? Thanks.

    additional info.
    I have found the correct error definition in english.
    "can not start the device (Code 10)"
    I have updated my bios to the latest version.
    I have just tried to uninstall all USB-drivers, and reinstall them.. Still no luck
    I have tried to uninstall and reinstall all webcam drivers - no luck

  • TS1967 After 'updating' the newest iTunes version, I cannot sync my iPod Nano!  It does not show up anymore.

    After 'updating' the newest iTunes version, I cannot sync my iPod Nano!  The 'old' version recognized and showed in icon to sync, but the newest version does not.  Is there a way to sync the older iPods?

    http://support.apple.com/kb/TS1591
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • I have an IPad 4.  After updating the system, when I try to look at picture on Facebook and make it larger, there is just a "circle" in the middle of the page instead of the picture.  Can anyone help me?

    I have an IPad 4.  After updating the system, when I try to look at picture on Facebook and make it larger, there is just a "circle" in the middle of the page instead of the picture.  Can anyone help me?

    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • [SOLVED] vi (vim) no longer works properly after updating the system

    After updating the system with pacman -Syu vi stopped working. All syntax colors are gone, and everything is grey. When I press i to enter "insert" mode, editing is not visible. Changes are obscure and you can't tell what you are modifying.  Quitting with :q will still prompt you to use :q! to abort changes, even if no changes were visibly made.
    When scrolling to the beginning or end of a file, the screen flashes with grey glitch like areas.  What happened to my vi!?!?!?!?!?
    This all happened while following the beginner's guide to install arch linux.  I realized this when trying to arbitrarily read a test file I made directly after updating.
    The problems continued to be visible when installing and setting up sudo (those steps are the next steps that require vi)...  I think the sudo installation worked... but my vi is horribly glitchy
    Any ideas?
    Last edited by trusktr (2010-02-19 07:19:55)

    Setting EDITOR does not help in every case. For instance, visudo is by default hard linked to vi. (You can change this, I know. )
    But in fact, vi is only a symlink to ex. So I simply renamed this link and put another symlink to vim (vim-big in my case since I in fact do use the gvim package).
    /usr/bin/vi -> vim-big
    /usr/bin/vi-simple -> ex
    The drawback is that I have to set those links on every vi-update. (But I sure will remember...)
    Last edited by bernarcher (2010-02-19 00:58:57)

  • After updating the software on my ipod touch to OS 6 it no longer works in my car

    After updating the software on my ipod touch to OS 6.1.4 it no longer works in my car.

    Try:
    - Reset the car system
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem,then the iOS update broke compatibility. That happens sometimes.

  • AFTER UPDATING THE IOS 8 IN MY IPHONE THE PHONE MEMORY REDUCED TO 5.5 GB WHICH IS VERY LOW COMPARED TO 8GB

    AFTER UPDATING THE IOS 8 IN MY IPHONE THE PHONE MEMORY REDUCED TO 5.5 GB WHICH IS VERY LOW COMPARED TO 8GB. IWANT DEGRADE IT TO  IOS 7.1.2

    You must have upgraded the device directly through WIFi, restore your device via ITUNES and thats gonna work, it will reduce the space occupied by the new software installation

Maybe you are looking for