After update to 10.6.3: Canon MF4320 cannot scan

After updating to both OS X 10.6.3. and the new Canon printerdrivers from Apples Software Update my *Canon MF4320* cannot scan anymore.
The option does, however, show up in the menu in +System Prefs/Print & Fax+, but when I click on +"Open Scanner..."+ the window poping up says +"No scanner is selected"+. I've tried to reinstall the drivers from Canons page again, didn't help. I then reinstalled the Apple option, no luck either.
Now what? I cannot work without this scanner as I'm a journalist.
Any suggestions and help will therefore be much appreciated.

Pahu
I updated to 10.6.3 and the new Canon drivers from Software Update last night. After that, could no longer print wirelessly to Canon MP640. Message said "communication error". I reset the printing system and re-added the printer. Printer works fine wirelessly after that, but now I can no longer add the scanner. The scanner did not show up on the Print/Fax Prefs in System Preferences in Wireless Mode.
In USB mode, then both printer and scanner functions are available.
Any thoughts on how I could get the scanner to work wirelessly again?

Similar Messages

Anyone having same problem? I phone 4 after updating to Vers.5.1.1. battery cannot be 100% full charge, always stop at 99% and battery drains off fast too :(

Anyone having same problem? I phone 4 after updating to Vers.5.1.1. battery cannot be 100% full charge, always stop at 99% and battery drains off fast too

I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot!

After updating to IOS 6.0.1 I cannot copy photos from the iPhoto library to the iPhone. The events appear correctly but the photo count in all the Events is 0

After updating to IOS 6.0.1 I cannot copy photos from the iPhoto library to the iPhone. The events appear correctly but the photo count in all the Events is 0

Same problem here, and it's not isolated.
https://discussions.apple.com/message/20228281#20228281
I believe you will find you can again sync Photos if you delete the "iPod Photo Cache", but predict that any subsequent attempt will fail. In my case, the enxt sync removes all the photos again - I've seen other reports of error messages upon sync. Mine just fails silently. :-)

After update to ios 5, my ipod touch cannot recharge anymore... it's out of battery now what should I do?

After update to ios 5, my ipod touch cannot recharge anymore... it's out of battery now what should I do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The appointment is free.
Apple Retail Store - Genius Bar

Reinstalled Adobe Acrobat XI Pro after upgrading to windows 8.1 and now cannot scan

Reinstalled Adobe Acrobat XI Pro after upgrading to windows 8.1 and now cannot scan through Adobe, although Scanner says its combatible with Windows 8. Cannot reinstall drivers because Brother claims they're built-in. Help!

1. Re: Reinstalled Adobe Acrobat XI Pro after upgrading to windows 8.1 and now cannot scan
Anubha Goel
I am using a Brother MFC 8460N and on Brother's site it says its compatible with win 8.1 and that the driver is already installed. When I try to scan I am told there is no preset (there was with win 7 though) and I have to "custom scan." When I try that, I hear a sound as if the printer is trying to scan, but the feeder can't pull the paper through. I then get a blank .pdf as my scan. Thanks for your advice. I will try that.

After updating to iOS 8, every morning I cannot send messages and have to restart my iPhone5 to send or receive any messages. How do I fix this??

I have a 32gb iPhone5, and every morning without fail, after updating to iOS8, my messages won't send, the message app crashes and won't respond, and then when it finally seems to, the whole thing is blank (as in no messages from anyone show up and the messages screen is just blank). The only way I've found to fix it is to turn off and on my phone and it works for another ~24 hours.
Is anyone else having this problem??

Hey Dr_Westopher,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty with iMessage. I would recommend that you read these articles, they may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Messages
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
Turn your iOS device off and on (restart) and reset
Use iTunes to restore your iOS device to factory settings
Thanks for using Apple Support Communities.
Have a nice day,
Mario

HT5594 After updating to iOS7 on my iPhone4 I cannot enable location services. How do I enable location services? I have tried turning off restrictions but that did not work.

After updating to iOS7 on my iPhone 4 I cannot enable location services. How do I enable location services? I have tried turning off restrictions but that did not work.

I finally just resolved this after not being able to enable location services since upagrading to iOS 7. Posting the solution here 'cause I couldn't find it anywhere else.
I enabled Restrictions under Settings > General > Restrictions and created a passcode (I'm not sure if this was part of the solution, but it wasn't enabled for me by default.)
In Restrictions, under Privacy, Location Services was set to "Allow Changes" (This still didn't solve the issue of the greyed-out Location Services switch though - I still couldn't turn it on.)
Also in Restrictions, I also switched "Find My Friends" to "Allow Changes"
Once I did step 3, the switch under Settings > Privacy > Location Services was no longer greyed out and could be switched on.
Hope this helps!

After Updating to version 11.1.4.62 cannot sync new music onto IPod

After updating any new songs I add will not sync onto my IPod. The songs are physically there on Itunes but will not show up on the IPod itself.

Found the answer....
Please follow this link.... Works GREAT for me!!!!
Thx GCK55.
https://discussions.apple.com/message/24619760#24619760

After updating my iphone 3gs to ios5 I cannot put the dot tapping twice on the keyboard twice

AFter updating my iphone 3Gs I cannot put a dot taapping twice on the keyboard anymore . What happens?

Check. Settings-General-Keyboard-"." shortcut.
Stedman

E61i after update firmware to 3.0633.69.00, cannot...

Hi
I cannot use wellness diary after update e61i firmware to 3.0633.69.00. I tried to re-install wellness diary with latest version, error occur!. How can I do? I need to use wellness diary. Please help.

check your product code hare for the latest available firmware:
http://europe.nokia.com/A4577224
if there was a number larger your current product code you can upgrade your phone via NSU.
if no, you should wait longer time(if your phone not to be branded)
check the below box,if i was helpful for you.
NOKIA means:Night Of King In Alone

After updating to automatic firefox 10.0 I cannot use open in new window. Why ?

Tried to "open link in new window" on several sites after automatically updating to 10.0 . Windows links will not open in new window.

You may need to delete the Firefox program folder before (re)installing the latest Firefox.<br />
In case you still have problems after installing then check your security software.
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*http://kb.mozillazine.org/Browser_will_not_start_up

After update to Mac OS X Lion i cannot burn discs?

Hello everyone,
I recentrly updated my macbook to Lion but after that I just cant burn any disc on itunes. Just when the disc is writting the fourth song i hear the disc stopping and after 30 seconds i get this message> "the attempt to burn a disc failed the burn failed because os a medium write error". I tried this 10 times having the same result.
I need help! I havent had this problem before updating to Lion. With Snow Leopard everything was OK.
Thank you.
I currently have the 10.7.3

Either take it into your local Apple Store or if you really believe it is lion causing it and not a faulty DVD drive then reinstall Snow Leopard from your last SL backup and see if it works again. Personally I would go with the first one as updating an OS can excenuate a problem that was underlying in the previous OS,
Good luck
Pete

After updating to iOS6 on ipod touch, music cannot sync properly! Help!!

I very regret updating my ipod touch 4thGen to iOs 6, because a lot of my apps crash, nothing working as it should and the battery life drains like crazy. All of which I can live eith except....
The first time I synced with my computer after upgrading wirelessly, all my songs disappeared, except the one album I bought on iTunes with the iPod. Except that according to iTunes, there is actually 10GB of music in there, just that the music app is unable to recognize it.
Restore to factory settings? Okay, but iTunes also does not seem to recognize that I made a purchase and the album that I previously bought, does not appear in the "Purchased Items" folder !!! So if I restore to factory settings, and see if that works, will I lost all the purchased songs??
Fixes?

Log into your account via iTunes and View Purchase History to see if it is their. You may have to contact iTunes.
Contact iTunes

After update to ios 7 , my numbers app cannot sync with iCloud .all my previous files gone.why?

After I update to ios7 , numbers app not working well,it cannot sync my previous iCloud documents done in ios6.1.3 .all my previous file gone, I try to uninstall numbers app and reinstall back, but no luck. I try to use safari on my desktop to go iCloud.com to back up my file but I found that I cannot login to numbers , it always jump back to ask me key in username and password..
Please help...

samrae88 wrote:
This issue seriously needs resolved or I will be leaving apple and iphone services for a windows phone.
In that case, GOODBYE!
FYI, these are user to user technical support forums. No one cares if you stay or leave, so leave.

Netflix Streaming on MacMini does not work after update to Yosemite

Netflix videos will no longer stream :
I am using a MacMini (late 2012) with an HP w2207h display. Intel processor 2.5 GHz Core !5 Intel HD Graphics 4000 1024 MG After updating to Yosemite, 10.10.1, I cannot stream videos from the Netflix site.
All of the monitor specs. would indicate that streaming videos in HDCP would be possible. Everything streamed very well until approximately 4 days ago.
I have changed the display resolution to 1080p. I have disconnected the monitor and reconnected it several times. I have updated iTunes as well as Yosemite.

Have you went to NetFlix's support site?

After update to 10.6.3: Canon MF4320 cannot scan

Similar Messages

Maybe you are looking for