After update to 10.6.3 copy to a Samba share fails

I have just upgraded to 10.6.3. Since then whenever I copy a file from my iMac to a Samba share on a Linux server I get the error:
The operation can't be completed because you don't have permission to access some of the items.
No changes were made on the server before this update.
If I create a file using any program or create/delete a folder on the share works fine, but I cannot copy files. The error occurs at the end of the copy, not a the beginning....
Anyone has had this problem? My best guess is something is not right with this latest patch.

Hi,
I have noticed the error occurs when I copy files from my Mac to any samba server (I run OpenSuSE on a Phenom-X4 and Ubuntu PPC on an old iBook-G3). However when I copy to a file share on a PC running Windows Server 2003 I do not get any file copy problems.
Reading and executing files from mounted samba shares or windows shares did not seem to have any issues.
For the moment I have relegated myself to copying files to a Windows OS running on a virtual machine in my Phenom-X4 and then logging into the VM and copying the files a second time to the samba share but I would appreciate anyone posting further on this issue. Because of my experiences I believe the issue is an incompatibility with the Samba servers after upgrading to 10.6.3.

Similar Messages

  • After updating to 5.2.1 my network connection is sporadic/fails.

    Finally ran the update to 5.2.1 this morning. No problems with the installation. Now, my network connection cuts out in the middle of programs and then cannot be restored, even after restarting appleTV. At the moment, my network is up and running (I'm typing this on it!), but the network test in Settings fails. I cannot access Hulu+ or Netflix fail with AppleTV. I am connected via ethernet and both IP and DNS are configured automatically. (Which always worked fine before the update.) I have changed NO settings.
    I did get it to connect briefly after the update, but then while watching a video it cut out and cannot be restored. Is this a new ethernet problem?
    I am NOT currently trying to run AirPlay. I am simply accessing via the AppleTV remote.

    I just posted this question (same problem).
    Last week I had an update for Apple TV (3). (version 5.2.1.) Now the streaming is so slow (or not working at all) that I am even not able to play music. Playing movies became total impossible. And sometimes the complete connection is lost. Even my computer is slowing down (on the internet), perhaps because something is happening between my computer and Apple TV. It became a total disaster and I do not know how to solve this. Further nothing changed. I have the same WiFi router, Apple TV is still on the same place and I have a signal strength of 80% on Apple TV.
    Hans Lijnbach

  • HT202157 After updating Applet TV 5.1, mirroring works bad. Streaming fails constantly

    I can still mirror my streaming content from my MacBook Pro, but it fails constantly making it impossible to watch it. Are they going to fix whatever is wrong with the new update?

    I'm still using Project My Screen on my Lumia 1520, through the Netgear PTV3000, attached to a 6-year-old Vizio flatscreen.  I mention the TV because I've also taken the 1520 and PTV3000 with me to hotels and sometimes had the "black screen." So, I suspect that something about the "recipient" TV affects whether or not Project My Screen is successful.  I suspect HDMI specifications vary, but I'm not techie enough to figure out what's compatible and what's not.

  • Featchures not working proper after update

    the back button stopped working after update. cant even past and copy ulrs to the address bar.

    Start Firefox in <b>[[Safe Mode | Safe Mode]]</b> to check if one of the extensions (orange Firefox button, top left corner ([[Image:new fx menu]] for v29+)/Tools > Add-ons > Extensions) is causing the problem (switch to the DEFAULT theme: orange Firefox button, top left corner ([[Image:new fx menu]] for v29+)/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *'''Windows/Mac''': Go to Help > Restart with add-ons disabled
    *'''Linux''': Run ''firefox -safe-mode'' in the Terminal/Konsole

  • ITunes no longer loads after updating to Windows 8.1.  I have tried every corrective step I've found on the web (reinstall, copy files, change permissions, etc.) nothing helps.  Has anyone heard if Apple is working on fix?

    Itunes does not launch after updating to Windows 8.1.  I've tried every suggestion I can find on web (reinstall, copy files from other directories, change permissions, etc.).  Nothing works.  At best I can get the licensing agreement to show and then nothing.  Has anyone heard if a fix is in the works?

    Hi 3backpacker3,
    It sounds like you are on the right track in troubleshooting this issue. If you are having launch issues, you may find the following article helpful:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Regards,
    - Brenden

  • After updating numbers and pages I can no longer copy multiple cells from numbers and paste and match style to pages.

    After updating numbers and pages I can no longer copy multiple cells from numbers and paste and match style to pages.  I used to be able to select multipule cells in a row (such as company name, address, etc.) then paste and match style on to a pages letter. I found the paste and match style option in the edit menu, however it will only work one cell at a time. Before the update is was working great.

    For diagnosing purpose thy the procedure in a new user account and see if it works there. You create a new user account in the System Preferences > Accounts. If it works in the new account it is probably a corrupt plist file that needs to be deleted.

  • After updating to IOS 6.0.1 I cannot copy photos from the iPhoto library to the iPhone. The events appear correctly but the photo count in all the Events is 0

    After updating to IOS 6.0.1 I cannot copy photos from the iPhoto library to the iPhone. The events appear correctly but the photo count in all the Events is 0

    Same problem here, and it's not isolated.
    https://discussions.apple.com/message/20228281#20228281
    I believe you will find you can again sync Photos if you delete the "iPod Photo Cache", but predict that any subsequent attempt will fail.  In my case, the enxt sync removes all the photos again - I've seen other reports of error messages upon sync.  Mine just fails silently. :-)

  • Copy/paste errors after updating Acrobat Professional to 8.1.3

    Hi,
    I as well as my colleague has recently experienced problems with copying/pasting comments in and between pdf-documents. It seems to me that the problems appeared after updating to 8.1.3. Very frustrating because we are using Acrobat intensively in our roof reading process.
    I found one other thread mentioning this but there is no solution.
    Lars Lindbjerg

    Sorry to hear about the trouble.  We've heard some reports of similar issues with files not opening after the 11.0.01/10.1.5/9.5.3 updates were installed.  I would suggest uninstalling Acrobat, the reinstalling and patching up to 10.1.4 again as an immediate solution.
    To help us figure out what may be going with your particular files, could you open one in Acrobat and choose File > Properties.  I'd like to know what it says next to the PDFProducer and Application lines.
    -David

  • Cannot copy information after updating to IOS5.0.1

    After updating IOS5.0.1, I cannot copy some information(word) from some websites to memo.I have try to use another IPOD touch(without updating IOS5.0.1) to copy the words from such websites, it works. How can I overcome this problem?

    I've seen that same issue on my iPhone. I still don't have a fix for it

  • After update, cannot copy to computers...

    After updating to 3.3.1 (Admin and Client), I can still control and observe, send UNIX reports and other typical tasks but I cannot make full use of copying anymore.
    When I try to copy, it misses on how many computers have a preexisting file and then fails on any computers that do not currently have a user logged in. I am trying to copy to a specific location, not to current user's desktop.
    I am working on a 24" iMac, latest generation running 10.5.8. I have also attempted it from my MBP, latest generation running 10.6.1.
    I have tried trashing preferences, reinstalling the Admin software, and re-upgrading client software. None of this has fixed the issue.
    With version 3.2, I had none of these issues and had been using ARD with no problem for a couple years.
    Matt

    I'm having the same problem with 3.3 (Admin) and 3.3.1 (client) on a Mac Pro running 10.5.8.
    In addition, I cannot run installer packages. It simply gets stuck on "Waiting for Item." After about 30 seconds it fails.
    I've tried completely uninstalling the software (according to Apple's instructions) and reinstalling. No luck.
    Whenever I launch the program it asks which computer I'd like to use for the Task Server. It also hangs for 10-15 seconds while opening the Security preference. I also see this in the log:
    Remote Desktop[521]: populateAuthenticateEntry: BUG ALERT! Server serial number in computer database is NULL!!!
    I've tried reinstalling, rebooting, and I can't figure it out. I didn't have any problems like this with previous versions. Any thing else I should try?

  • After updating my iphone 3gs not able to copy pics from my macbook to iphone.

    Hi,
    After updating my iPhone 3gs, I am not able to sync photos using itunes. What could be the possible reason? It is not sync-ing Apps which i have purchased from App Store. Basically facing problem in synchronizing my iphone & macbook using iTunes.

    You have to understand the difference between an Update and an Upgrade.
    An Update is a free change within an existing Operating System. Such as the .8 added to 10.5.
    An Upgrade is a complete new Operating System that must be purchased. Such as 10.5 Leopard to 10.6 Snow Leopard.
    You have to upgrade to 10.6.8 to be able to download iTunes 10.7. The Snow Leopard 10.6 DVD should still be available from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list. The App Store which is required to download 10.7 Lion or 10.8 Mountain Lion is part of the 10.6.6 update.
      If they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
    http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0
    10.7 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store.  The price is still $29.

  • Can no longer read text on browser itself--tabs, headings, etc.--after updating to v 4. How can I enlarge these fonts?

    I just updated to Firefox 4.0. I made NO changes to existing settings. After updating, font size of BROWSER headings, tabs, etc. appear so small that I am barely able to read them. (Note that I am NOT talking about font size on web pages--just on browser itself. ) Have used firefox for years--don't want to give it up--but will have to if can't find a solution for this.

    I don't know where it is going to look.  As I did all the Orthoptera, haing to go to the source of every page, andchanging the links to the moths to the Orthoptera, I had to do the same with other Oders.  Now I am on the Diptera, and went to the previously created Orthoptera gallery and changed the text and link from Orthoptera to Diptera.  But it still shows text and link, moth, instead.  So I continue to have to go to each pages source coded and change individually.
    Here is what I don't understand.  When I go to the folder that is at  C://program files/adobe/adobe photoshop cs4 (64 bit)/presets/web photo gallery,  the renamed, copied and modified folder, Diptera is there, and come up in the choices of templates.  But the text and link modifications don't occur when the gallery is run.  Where could it be going to get the moth stuff, when it goes to this folder for the template? 
    What you said about the 64 bit makes sense, but I don't know where it could be going to create the gallery when the folder named Diptera is ther.

  • After Updating to Server 4.1 Open directory and LPAD gone

    Hello,
    two days ago I discovered that Open directory was not working on our Server (Mac Mini 2012). I suspect it stopped working after updating to 10.10.3 and OS-X Server 4.1. When I try to start Open directory in the Server App the Server App prompts: Unable to load Replica List. When I try to recreate my Open directory Server I Get: OD Server already exists.
    I get the following log entries:
    LDAP Log
    Apr 11 22:03:02 server.seju.eu slapd[925]: @(#) $OpenLDAP: slapd 2.4.28 (Feb 24 2015 21:45:59) $
      [email protected]:/BinaryCache/OpenLDAP/OpenLDAP-499.32.4~1/Objects/servers/slapd
    Apr 11 22:03:02 server.seju.eu slapd[925]: daemon: SLAP_SOCK_INIT: dtblsize=8192
    Apr 11 22:03:02 server.seju.eu slapd[925]: TLS: OPENDIRECTORY_SSL_IDENTITY identity preference overrode configured olcTLSIdentity "APPLE:server.seju.eu"
    Apr 11 22:03:02 server.seju.eu slapd[925]: slap_add_listener: opened additional listener 'ldaps:///'
    Apr 11 22:03:02 server.seju.eu slapd[925]: bdb(dc=server,dc=seju,dc=eu): unable to allocate memory for mutex; resize mutex region
    Apr 11 22:03:02 server.seju.eu slapd[925]: bdb_db_open: database "dc=server,dc=seju,dc=eu" cannot be opened, err 12. Restore from backup!
    Apr 11 22:03:02 server.seju.eu slapd[925]: bdb(dc=server,dc=seju,dc=eu): txn_checkpoint interface requires an environment configured for the transaction subsystem
    Apr 11 22:03:02 server.seju.eu slapd[925]: bdb_db_close: database "dc=server,dc=seju,dc=eu": txn_checkpoint failed: Invalid argument (22).
    Apr 11 22:03:02 server.seju.eu slapd[925]: backend_startup_one (type=bdb, suffix="dc=server,dc=seju,dc=eu"): bi_db_open failed! (12)
    Apr 11 22:03:02 server.seju.eu slapd[925]: bdb_db_close: database "dc=server,dc=seju,dc=eu": alock_close failed
    Apr 11 22:03:02 server.seju.eu slapd[925]: slapd stopped.
    Open Directory Log
    2015-04-11 21:57:10.624284 CEST - AID: 0x0000000000000000 - opendirectoryd (build 382.20.2) launched...
    2015-04-11 21:57:10.752590 CEST - AID: 0x0000000000000000 - Logging level limit changed to 'error'
    2015-04-11 21:57:10.916732 CEST - AID: 0x0000000000000000 - Initialize trigger support
    2015-04-11 21:57:10.951833 CEST - AID: 0x0000000000000000 - Loaded bundle at path '/System/Library/OpenDirectory/Modules/SystemCache.bundle'
    2015-04-11 21:57:10.958469 CEST - AID: 0x0000000000000000 - Module: SystemCache - failed to load persistent state - Input/output error
    2015-04-11 21:57:10.962533 CEST - AID: 0x0000000000000000 - Registered node with name '/Active Directory' as hidden
    2015-04-11 21:57:10.962833 CEST - AID: 0x0000000000000000 - Registered node with name '/Configure' as hidden
    2015-04-11 21:57:10.963182 CEST - AID: 0x0000000000000000 - Discovered configuration for node name '/Contacts' at path '/Library/Preferences/OpenDirectory/Configurations//Contacts.plist'
    2015-04-11 21:57:10.963194 CEST - AID: 0x0000000000000000 - Registered node with name '/Contacts'
    2015-04-11 21:57:10.963438 CEST - AID: 0x0000000000000000 - Registered node with name '/LDAPv3' as hidden
    2015-04-11 21:57:10.966901 CEST - AID: 0x0000000000000000 - Registered node with name '/Local' as hidden
    2015-04-11 21:57:10.968600 CEST - AID: 0x0000000000000000 - Registered node with name '/NIS' as hidden
    2015-04-11 21:57:11.031990 CEST - AID: 0x0000000000000000 - Discovered configuration for node name '/Search' at path '/Library/Preferences/OpenDirectory/Configurations//Search.plist'
    2015-04-11 21:57:11.032007 CEST - AID: 0x0000000000000000 - Registered node with name '/Search'
    2015-04-11 21:57:12.343838 CEST - AID: 0x0000000000000000 - Discovered configuration for node name '/LDAPv3/127.0.0.1' at path '/Library/Preferences/OpenDirectory/Configurations/LDAPv3/127.0.0.1.plist'
    2015-04-11 21:57:12.343888 CEST - AID: 0x0000000000000000 - Registered subnode with name '/LDAPv3/127.0.0.1'
    2015-04-11 21:57:13.549377 CEST - AID: 0x0000000000000000 - Loaded bundle at path '/System/Library/OpenDirectory/Modules/legacy.bundle'
    2015-04-11 21:57:13.551131 CEST - AID: 0x0000000000000000 - Loaded bundle at path '/System/Library/OpenDirectory/Modules/search.bundle'
    2015-04-11 21:57:13.554053 CEST - AID: 0x0000000000000000 - '/Search' has registered, loading additional services
    2015-04-11 21:57:13.554064 CEST - AID: 0x0000000000000000 - Initialize augmentation support
    2015-04-11 21:57:13.557920 CEST - AID: 0x0000000000000000 - Successfully registered for Kernel identity service requests
    2015-04-11 21:57:13.557940 CEST - AID: 0x0000000000000000 - Adjusting kernel ID cache (100 -> 250) and membership cache (100 -> 500)
    2015-04-11 21:57:13.575235 CEST - AID: 0x0000000000000000 - Loaded bundle at path '/System/Library/OpenDirectory/Modules/PlistFile.bundle'
    2015-04-11 21:57:13.578418 CEST - AID: 0x0000000000000000 - Loaded bundle at path '/System/Library/OpenDirectory/Modules/FDESupport.bundle'
    2015-04-11 21:57:13.583810 CEST - AID: 0x0000000000000000 - Loaded bundle at path '/System/Library/OpenDirectory/Modules/AppleID.bundle'
    2015-04-11 21:57:13.615788 CEST - AID: 0x0000000000000000 - Loaded bundle at path '/System/Library/OpenDirectory/Modules/ConfigurationProfiles.bundle'
    2015-04-11 21:57:13.619666 CEST - AID: 0x0000000000000000 - Registered subnode with name '/Local/Default'
    2015-04-11 21:57:13.632498 CEST - AID: 0x0000000000000000 - Loaded bundle at path '/System/Library/OpenDirectory/Modules/ldap.bundle'
    2015-04-11 21:57:13.845588 CEST - AID: 0x0000000000000000 - Loaded bundle at path '/System/Library/OpenDirectory/Modules/AppleODClientLDAP.bundle'
    2015-04-11 21:57:13.849664 CEST - AID: 0x0000000000000000 - Loaded bundle at path '/System/Library/OpenDirectory/Modules/AppleODClientPWS.bundle'

    I had a similar problem. A couple days after upgrading, I encountered OD's "Unable to load replica" problem and had my server's certificate deleted from my system keychain!
    Server.app + OD + LDAP are all extremely fragile and I just don't trust them during transitions, so I always keep an independent bootable backup with Carbon Copy Cloner and this preflight script. I'll post my notes for recovering OD below, but in my case, nothing worked this time, and I couldn't start OD robustly across reboots. Fortunately for me, my 12 hour old bootable backup was working, so I just used CCC to copy my bootable backup back. Not sure what I would have done had that not worked short of rebuilding everything from scratch.
    Pre-steps:
    0. Bootable backups, Time Machine backups, and dirserv backups of everything.
    1. Disk Utility: Fix disk permissions, Fix disk
    2. PRAM reset, Command-Option-P-R at boot
    3. DiskWarrior to rebuild the disk directory
    Possible steps to fix OD:
    # Fix Open Directory "Unable to load replica"
    # Try this first:
    # https://support.apple.com/en-us/HT200018
    # Quit Server.app
    sudo mkdir /var/db/openldap/migration/
    sudo touch /var/db/openldap/migration/.rekerberize
    sudo killall PasswordService
    # Open Server.app
    # Try this second:
    # http://apple.stackexchange.com/questions/79141/how-to-fix-failing-open-directory -database-cn-authdata-cannot-be-opened-err
    sudo serveradmin stop dirserv
    sudo launchctl unload -w /System/Library/LaunchDaemons/org.openldap.slapd.plist
    sudo db_recover -h /var/db/openldap/authdata/
    sudo /usr/libexec/slapd -Tt
    sudo launchctl load -w /System/Library/LaunchDaemons/org.openldap.slapd.plist
    sudo serveradmin start dirserv
    # Try this third:
    # https://discussions.apple.com/thread/6018956
    sudo serveradmin stop dirserv
    sudo slapconfig -restoredb /private/var/backups/ServerBackup_OpenDirectoryMaster.sparseimage
    sudo serveradmin start dirserv
    # Try this fourth (assuming ccc_preflight od backup):
    # https://discussions.apple.com/thread/6018956
    sudo serveradmin stop dirserv
    sudo slapconfig -restoredb /private/var/backups/odbackup/od_2015-04-11.sparseimage
    sudo serveradmin start dirserv
    # Try this last:
    sudo rsync -va /your-backup-drive-possibly-TM/private/var/db/openldap/authdata/ /private/var/db/openldap/authdata/
    If your server cert gets deleted from the System keychain, you'll need to boot into the bootable backup and export the certificate+key that looks like hostname.domainname.tld, signed by IntermediateCA_HOSTNAME.DOMAINNAME.TLD_1, copy this to the server drive, import back into the System keychain. The cert should then appear within Server.app again. See here for how to do this if all you have is the System keychain file.
    If anyone has reliable advice how to fix a corrupt OD that would be a huge help.

  • After updating my MacBook Pro to yeosemite I want my old screen saver picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this

    After updating my MacBook Pro to yeosemite I want my old desktop picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this folder. It is in TimeMachine".

    Can you browse the Time Machine drive from Finder?
    If you can and you know where the picture was stored ie on your desktop you can browse through the folder structure to the picture copy it and paste it somewhere on your new install before right clicking it and 'set as desktop background'

  • Multiseat with Lightdm broken after updating Mesa

    Hi,
    I've been using a multiseat configuration for months now, and it was working almost perfectly (almost - multiseating is far from being really stable yet IMHO, but anyway).
    I updated mesa-libgl a few days ago and confirmed packages replacement, but right after rebooting my second seat didn't work anymore. The display stays black and no login screen shows up, although I suppose a signal is still sent as the monitor doesn't go into sleep mode. The first seat on the other side is working as usual, no difference noted.
    In the processes, I can only see one Xorg instance (used by the first seat), when I'm supposed to have tow instances, one for each seat and with different parameters. It's like the second seat is crashing, but I can see no trace of such crash in the logs (kernel.log or everything.log). Even the Xorg.1.log contains all the informations as if the display was running fine.
    The day after updating Mesa, I also updated Lightdm but it didn't change anything (I had a brief hope for a moment).
    My configuration is the following :
        - Nvidia GTX 760: used on seat0 as dual-head with Nouveau driver (Layout-Main in Xorg)
        - Intel GMA: used on seat1 on single-head with Intel driver (Layout-Aux in Xorg)
    I'm using Lightdm with this configuration:
    [LightDM]
    minimum-vt=1
    run-directory=/run/lightdm
    [SeatDefaults]
    greeter-session=lightdm-gtk-greeter
    greeter-show-manual-login=true
    session-wrapper=/etc/lightdm/Xsession
    greeter-setup-script=/usr/bin/numlockx on
    [Seat:0]
    xserver-command=/usr/bin/X :0 -sharevts
    xserver-layout=Layout-Main
    [Seat:1]
    xserver-command=/usr/bin/X :1 -sharevts -novtswitch
    xserver-layout=Layout-Aux
    The Xorg configuration for the seats is divided into two files:
    /etc/X11/xorg.conf.d/50-serverlayout-main.conf
    Section "ServerLayout"
    Identifier "Layout-Main"
    Screen "Screen-Main" 0 0
    InputDevice "Logitech-Illuminated" "CoreKeyboard"
    InputDevice "Logitech-G100S" "CorePointer"
    Option "AllowEmptyInput" "true"
    EndSection
    Section "InputDevice"
    Identifier "Logitech-G100S"
    Driver "evdev"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/by-id/usb-Logitech_G100s_Optical_Gaming_Mouse-event-mouse"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    Option "GrabDevice" "on" # prevent send event to other X-servers
    EndSection
    Section "InputDevice"
    Identifier "Logitech-Illuminated"
    Driver "evdev"
    Option "XkbLayout" "fr"
    Option "XkbModel" "pc104"
    Option "Device" "/dev/input/by-id/usb-Logitech_Logitech_Illuminated_Keyboard-event-kbd"
    Option "GrabDevice" "on" # prevent send event to other X-servers
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Samsung"
    ModelName "Samsung SyncMaster 2433"
    HorizSync 30.0 - 81.0
    VertRefresh 56.0 - 60.0
    Option "DPMS"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Samsung"
    ModelName "Samsung SyncMaster 2333sw"
    HorizSync 30.0 - 81.0
    VertRefresh 56.0 - 60.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "NVIDIA-GTX760"
    Driver "nouveau"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GTX 760"
    EndSection
    Section "Screen"
    Identifier "Screen-Main"
    Device "NVIDIA-GTX760"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    /etc/X11/xorg.conf.d/51-serverlayout-aux.conf
    Section "ServerLayout"
    Identifier "Layout-Aux"
    Screen "Screen-Aux" 0 0
    InputDevice "K400r-keyboard" "CoreKeyboard"
    InputDevice "K400r-keyboard-multimedia" "SendCoreEvents"
    InputDevice "K400r-mouse" "CorePointer"
    Option "AllowEmptyInput" "true"
    EndSection
    Section "InputDevice"
    Identifier "K400r-mouse"
    Driver "evdev"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/by-id/usb-Logitech_USB_Receiver-if02-mouse"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    Option "GrabDevice" "on" # prevent send event to other X-servers
    EndSection
    Section "InputDevice"
    Identifier "K400r-keyboard"
    Driver "evdev"
    Option "XkbLayout" "fr"
    Option "XkbModel" "pc104"
    Option "Device" "/dev/input/by-id/usb-Logitech_USB_Receiver-if02-event-mouse"
    Option "GrabDevice" "on" # prevent send event to other X-servers
    EndSection
    Section "InputDevice"
    Identifier "K400r-keyboard-multimedia"
    Driver "evdev"
    Option "Device" "/dev/input/by-id/usb-Logitech_USB_Receiver-if02-event-mouse"
    Option "XkbModel" "evdev"
    Option "GrabDevice" "on"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Compaq"
    ModelName "Compaq Q2159"
    HorizSync 30.0 - 81.0
    VertRefresh 56.0 - 60.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Intel-I915"
    Driver "intel"
    VendorName "Intel"
    BoardName "Intel IGP"
    BusID "PCI:0:2:0"
    # Option "NoAccel" "True"
    # Option "DRI" "False"
    # Option "TearFree" "true"
    # Option "AccelMethod" "sna"
    EndSection
    Section "Screen"
    Identifier "Screen-Aux"
    Device "Intel-I915"
    Monitor "Monitor1"
    DefaultDepth 24
    EndSection
    When I disable the primary seat configuration in Xorg files (I just prevent the file from being loaded), and after I restart Lightm via
    # systemctl restart lightdm
    the display shows up correctly on the secondary seat (and not on the primary, which is logical so far). So in the end it seems I just cannot have both seat running at the same time, but individually they work fine.
    My logical assumption is that the recent upgrade of the Mesa packages somehow broke this configuration, but I cannot find why and how.
    FYI, here's what I tried:
    - play with Intel drivers options in Xorg (NoAccel, DRI, ...)
    - play with Xorg options on the command line of each seat (-sharevts, -novtswitch)
    - switch to Nvidia proprietary drivers (but here also, only the primary seat works, but that may be for a totally different reason, which is why I used Nouveau ever since I set up this configuration)
    Here are the Xorg log files:
    Xorg.0.log
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    [ 6.853] X Protocol Version 11, Revision 0
    [ 6.853] Build Operating System: Linux 3.16.1-1-ARCH x86_64
    [ 6.853] Current Operating System: Linux leto 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    [ 6.854] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=83e16b30-5b35-4b15-9bce-5ec87c00d46d rw quiet
    [ 6.854] Build Date: 21 September 2014 10:53:13AM
    [ 6.854]
    [ 6.854] Current version of pixman: 0.32.6
    [ 6.854] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 6.854] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 6.854] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 3 23:21:15 2014
    [ 6.855] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 6.855] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 6.857] (==) ServerLayout "Layout-Main"
    [ 6.857] (**) |-->Screen "Screen-Main" (0)
    [ 6.857] (**) | |-->Monitor "Monitor0"
    [ 6.857] (**) | |-->Device "NVIDIA-GTX760"
    [ 6.857] (**) |-->Input Device "Logitech-Illuminated"
    [ 6.857] (**) |-->Input Device "Logitech-G100S"
    [ 6.857] (==) Automatically adding devices
    [ 6.857] (==) Automatically enabling devices
    [ 6.857] (==) Automatically adding GPU devices
    [ 6.858] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 6.858] Entry deleted from font path.
    [ 6.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 6.860] Entry deleted from font path.
    [ 6.860] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 6.860] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 6.860] Entry deleted from font path.
    [ 6.860] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 6.860] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 6.860] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 6.860] (II) Loader magic: 0x818d80
    [ 6.860] (II) Module ABI versions:
    [ 6.860] X.Org ANSI C Emulation: 0.4
    [ 6.860] X.Org Video Driver: 18.0
    [ 6.860] X.Org XInput driver : 21.0
    [ 6.860] X.Org Server Extension : 8.0
    [ 6.861] (EE) systemd-logind: failed to get session: PID 656 does not belong to any known session
    [ 6.861] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 6.861] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 6.862] (--) PCI: (0:0:2:0) 8086:0412:1458:d000 rev 6, Mem @ 0xdb400000/4194304, 0xc0000000/268435456, I/O @ 0x0000f000/64
    [ 6.862] (--) PCI:*(0:1:0:0) 10de:1187:1462:2848 rev 161, Mem @ 0xda000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 6.862] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 6.862] (II) LoadModule: "glx"
    [ 6.863] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 6.873] (II) Module glx: vendor="X.Org Foundation"
    [ 6.873] compiled for 1.16.1, module version = 1.0.0
    [ 6.873] ABI class: X.Org Server Extension, version 8.0
    [ 6.873] (==) AIGLX enabled
    [ 6.873] (II) LoadModule: "nouveau"
    [ 6.874] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 6.875] (II) Module nouveau: vendor="X.Org Foundation"
    [ 6.875] compiled for 1.16.1, module version = 1.0.11
    [ 6.875] Module class: X.Org Video Driver
    [ 6.875] ABI class: X.Org Video Driver, version 18.0
    [ 6.875] (II) LoadModule: "evdev"
    [ 6.875] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 6.877] (II) Module evdev: vendor="X.Org Foundation"
    [ 6.877] compiled for 1.16.0, module version = 2.9.0
    [ 6.877] Module class: X.Org XInput Driver
    [ 6.877] ABI class: X.Org XInput driver, version 21.0
    [ 6.877] (II) NOUVEAU driver
    [ 6.877] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 6.877] RIVA TNT (NV04)
    [ 6.877] RIVA TNT2 (NV05)
    [ 6.877] GeForce 256 (NV10)
    [ 6.877] GeForce 2 (NV11, NV15)
    [ 6.877] GeForce 4MX (NV17, NV18)
    [ 6.877] GeForce 3 (NV20)
    [ 6.877] GeForce 4Ti (NV25, NV28)
    [ 6.878] GeForce FX (NV3x)
    [ 6.878] GeForce 6 (NV4x)
    [ 6.878] GeForce 7 (G7x)
    [ 6.878] GeForce 8 (G8x)
    [ 6.878] GeForce GTX 200 (NVA0)
    [ 6.878] GeForce GTX 400 (NVC0)
    [ 6.878] (++) using VT number 1
    [ 6.878] (II) [drm] nouveau interface version: 1.1.2
    [ 6.878] (II) Loading sub module "dri2"
    [ 6.878] (II) LoadModule: "dri2"
    [ 6.878] (II) Module "dri2" already built-in
    [ 6.878] (--) NOUVEAU(0): Chipset: "NVIDIA NVE4"
    [ 6.878] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 6.878] (==) NOUVEAU(0): RGB weight 888
    [ 6.878] (==) NOUVEAU(0): Default visual is TrueColor
    [ 6.878] (==) NOUVEAU(0): Using HW cursor
    [ 6.878] (==) NOUVEAU(0): GLX sync to VBlank enabled.
    [ 6.878] (==) NOUVEAU(0): Page flipping enabled
    [ 6.878] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
    [ 6.878] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
    [ 6.878] (II) NOUVEAU(0): Initializing outputs ...
    [ 6.935] (II) NOUVEAU(0): Output DVI-I-1 using monitor section Monitor0
    [ 6.965] (II) NOUVEAU(0): Output DVI-D-1 has no monitor section
    [ 6.967] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
    [ 7.073] (II) NOUVEAU(0): Output DP-1 has no monitor section
    [ 7.073] (II) NOUVEAU(0): 4 crtcs needed for screen.
    [ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
    [ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
    [ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 2 to this screen.
    [ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 3 to this screen.
    [ 7.134] (II) NOUVEAU(0): EDID for output DVI-I-1
    [ 7.134] (II) NOUVEAU(0): Manufacturer: SAM Model: 5c8 Serial#: 1129132596
    [ 7.134] (II) NOUVEAU(0): Year: 2009 Week: 46
    [ 7.134] (II) NOUVEAU(0): EDID Version: 1.3
    [ 7.134] (II) NOUVEAU(0): Digital Display Input
    [ 7.134] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 52 vert.: 29
    [ 7.134] (II) NOUVEAU(0): Gamma: 2.20
    [ 7.134] (II) NOUVEAU(0): DPMS capabilities: Off
    [ 7.134] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 7.134] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 7.134] (II) NOUVEAU(0): redX: 0.647 redY: 0.334 greenX: 0.284 greenY: 0.607
    [ 7.134] (II) NOUVEAU(0): blueX: 0.151 blueY: 0.071 whiteX: 0.312 whiteY: 0.329
    [ 7.134] (II) NOUVEAU(0): Supported established timings:
    [ 7.134] (II) NOUVEAU(0): 640x480@60Hz
    [ 7.134] (II) NOUVEAU(0): 800x600@56Hz
    [ 7.134] (II) NOUVEAU(0): 800x600@60Hz
    [ 7.134] (II) NOUVEAU(0): 1024x768@60Hz
    [ 7.134] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 7.134] (II) NOUVEAU(0): Supported standard timings:
    [ 7.134] (II) NOUVEAU(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 7.134] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 7.134] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 7.134] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 7.134] (II) NOUVEAU(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
    [ 7.134] (II) NOUVEAU(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 7.134] (II) NOUVEAU(0): Supported detailed timing:
    [ 7.134] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 521 x 293 mm
    [ 7.134] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 7.134] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 7.134] (II) NOUVEAU(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
    [ 7.134] (II) NOUVEAU(0): Monitor name: SyncMaster
    [ 7.134] (II) NOUVEAU(0): Serial No: H9XSB06266
    [ 7.134] (II) NOUVEAU(0): Supported detailed timing:
    [ 7.134] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 521 x 293 mm
    [ 7.134] (II) NOUVEAU(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
    [ 7.134] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 7.134] (II) NOUVEAU(0): Supported detailed timing:
    [ 7.134] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 521 x 293 mm
    [ 7.134] (II) NOUVEAU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
    [ 7.134] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 7.134] (II) NOUVEAU(0): Supported detailed timing:
    [ 7.134] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 521 x 293 mm
    [ 7.134] (II) NOUVEAU(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
    [ 7.134] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 7.134] (II) NOUVEAU(0): Supported detailed timing:
    [ 7.134] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 521 x 293 mm
    [ 7.134] (II) NOUVEAU(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
    [ 7.134] (II) NOUVEAU(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
    [ 7.134] (II) NOUVEAU(0): Supported detailed timing:
    [ 7.134] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 521 x 293 mm
    [ 7.134] (II) NOUVEAU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
    [ 7.134] (II) NOUVEAU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
    [ 7.134] (II) NOUVEAU(0): Number of EDID sections to follow: 1
    [ 7.134] (II) NOUVEAU(0): EDID (in hex):
    [ 7.134] (II) NOUVEAU(0): 00ffffffffffff004c2dc80534324d43
    [ 7.134] (II) NOUVEAU(0): 2e13010380341d782aeed1a555489b26
    [ 7.134] (II) NOUVEAU(0): 1250542308008100814081809500a940
    [ 7.134] (II) NOUVEAU(0): b30001010101023a801871382d40582c
    [ 7.134] (II) NOUVEAU(0): 450009252100001e000000fd00383c1e
    [ 7.134] (II) NOUVEAU(0): 5111000a202020202020000000fc0053
    [ 7.134] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff
    [ 7.134] (II) NOUVEAU(0): 00483958534230363236360a20200111
    [ 7.134] (II) NOUVEAU(0): 02010400023a80d072382d40102c4580
    [ 7.134] (II) NOUVEAU(0): 09252100001e011d007251d01e206e28
    [ 7.134] (II) NOUVEAU(0): 550009252100001e011d00bc52d01e20
    [ 7.134] (II) NOUVEAU(0): b828554009252100001e8c0ad0902040
    [ 7.134] (II) NOUVEAU(0): 31200c4055000925210000188c0ad08a
    [ 7.134] (II) NOUVEAU(0): 20e02d10103e96000925210000180000
    [ 7.134] (II) NOUVEAU(0): 00000000000000000000000000000000
    [ 7.134] (II) NOUVEAU(0): 0000000000000000000000000000005e
    [ 7.134] (II) NOUVEAU(0): Not using mode "1920x1080" (vrefresh out of range)
    [ 7.134] (II) NOUVEAU(0): Not using mode "1280x720" (vrefresh out of range)
    [ 7.134] (II) NOUVEAU(0): Not using mode "720x576" (vrefresh out of range)
    [ 7.134] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
    [ 7.134] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 7.134] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 7.134] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 7.164] (II) NOUVEAU(0): EDID for output DVI-D-1
    [ 7.164] (II) NOUVEAU(0): Manufacturer: SAM Model: 4de Serial#: 1129132595
    [ 7.164] (II) NOUVEAU(0): Year: 2009 Week: 6
    [ 7.164] (II) NOUVEAU(0): EDID Version: 1.3
    [ 7.164] (II) NOUVEAU(0): Digital Display Input
    [ 7.164] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 51 vert.: 29
    [ 7.164] (II) NOUVEAU(0): Gamma: 2.20
    [ 7.164] (II) NOUVEAU(0): DPMS capabilities: Off
    [ 7.164] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 7.164] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 7.164] (II) NOUVEAU(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
    [ 7.164] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
    [ 7.164] (II) NOUVEAU(0): Supported established timings:
    [ 7.164] (II) NOUVEAU(0): 640x480@60Hz
    [ 7.164] (II) NOUVEAU(0): 800x600@56Hz
    [ 7.164] (II) NOUVEAU(0): 800x600@60Hz
    [ 7.164] (II) NOUVEAU(0): 1024x768@60Hz
    [ 7.164] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 7.164] (II) NOUVEAU(0): Supported standard timings:
    [ 7.164] (II) NOUVEAU(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 7.164] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 7.164] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 7.164] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 7.164] (II) NOUVEAU(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 7.164] (II) NOUVEAU(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
    [ 7.164] (II) NOUVEAU(0): Supported detailed timing:
    [ 7.164] (II) NOUVEAU(0): clock: 138.5 MHz Image Size: 477 x 268 mm
    [ 7.164] (II) NOUVEAU(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
    [ 7.164] (II) NOUVEAU(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
    [ 7.164] (II) NOUVEAU(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 75 kHz, PixClock max 175 MHz
    [ 7.164] (II) NOUVEAU(0): Monitor name: SyncMaster
    [ 7.164] (II) NOUVEAU(0): Serial No: H9XS201897
    [ 7.164] (II) NOUVEAU(0): EDID (in hex):
    [ 7.164] (II) NOUVEAU(0): 00ffffffffffff004c2dde0433324d43
    [ 7.164] (II) NOUVEAU(0): 0613010380331d782aee91a3544c9926
    [ 7.164] (II) NOUVEAU(0): 0f50542308008100814081809500b300
    [ 7.164] (II) NOUVEAU(0): a940010101011a3680a070381f403020
    [ 7.164] (II) NOUVEAU(0): 3500dd0c1100001a000000fd00383d1e
    [ 7.164] (II) NOUVEAU(0): 4b11000a202020202020000000fc0053
    [ 7.164] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff
    [ 7.164] (II) NOUVEAU(0): 00483958533230313839370a2020008b
    [ 7.164] (II) NOUVEAU(0): Printing probed modes for output DVI-D-1
    [ 7.164] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 7.164] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 7.164] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 7.164] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 7.164] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 7.164] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 7.164] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 7.164] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 7.164] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 7.164] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 7.164] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 7.166] (II) NOUVEAU(0): EDID for output HDMI-1
    [ 7.270] (II) NOUVEAU(0): EDID for output DP-1
    [ 7.270] (II) NOUVEAU(0): Output DVI-I-1 connected
    [ 7.270] (II) NOUVEAU(0): Output DVI-D-1 connected
    [ 7.270] (II) NOUVEAU(0): Output HDMI-1 disconnected
    [ 7.270] (II) NOUVEAU(0): Output DP-1 disconnected
    [ 7.270] (II) NOUVEAU(0): Using exact sizes for initial modes
    [ 7.270] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
    [ 7.270] (II) NOUVEAU(0): Output DVI-D-1 using initial mode 1920x1080
    [ 7.270] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 7.270] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
    [ 7.270] (**) NOUVEAU(0): Driver mode "1920x1080": 138.5 MHz (scaled from 0.0 MHz), 66.6 kHz, 59.9 Hz
    [ 7.270] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 7.270] (**) NOUVEAU(0): Driver mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
    [ 7.270] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 7.270] (**) NOUVEAU(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
    [ 7.270] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 7.270] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    [ 7.270] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 7.270] (**) NOUVEAU(0): Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
    [ 7.270] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 7.270] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
    [ 7.270] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 7.270] (**) NOUVEAU(0): Driver mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 49.3 kHz, 59.9 Hz
    [ 7.270] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 7.270] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    [ 7.270] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 7.270] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
    [ 7.270] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 7.270] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
    [ 7.270] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 7.270] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    [ 7.270] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 7.270] (==) NOUVEAU(0): DPI set to (96, 96)
    [ 7.270] (II) Loading sub module "fb"
    [ 7.270] (II) LoadModule: "fb"
    [ 7.270] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 7.272] (II) Module fb: vendor="X.Org Foundation"
    [ 7.272] compiled for 1.16.1, module version = 1.0.0
    [ 7.272] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 7.272] (II) Loading sub module "shadowfb"
    [ 7.272] (II) LoadModule: "shadowfb"
    [ 7.272] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 7.272] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 7.272] compiled for 1.16.1, module version = 1.0.0
    [ 7.272] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 7.272] (--) Depth 24 pixmap format is 32 bpp
    [ 7.278] (II) NOUVEAU(0): Channel setup complete.
    [ 7.279] (II) NOUVEAU(0): [COPY] async initialised.
    [ 7.280] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 7.280] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 7.280] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
    [ 7.281] (II) Loading sub module "exa"
    [ 7.281] (II) LoadModule: "exa"
    [ 7.281] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 7.281] (II) Module exa: vendor="X.Org Foundation"
    [ 7.281] compiled for 1.16.1, module version = 2.6.0
    [ 7.281] ABI class: X.Org Video Driver, version 18.0
    [ 7.281] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 7.281] (II) EXA(0): Driver registered support for the following operations:
    [ 7.281] (II) Solid
    [ 7.281] (II) Copy
    [ 7.281] (II) Composite (RENDER acceleration)
    [ 7.281] (II) UploadToScreen
    [ 7.281] (II) DownloadFromScreen
    [ 7.281] (==) NOUVEAU(0): Backing store enabled
    [ 7.281] (==) NOUVEAU(0): Silken mouse enabled
    [ 7.282] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
    [ 7.282] (II) NOUVEAU(0): [XvMC] Extension initialized.
    [ 7.282] (**) NOUVEAU(0): DPMS enabled
    [ 7.282] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 7.282] (--) RandR disabled
    [ 7.363] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 7.363] (II) AIGLX: enabled GLX_ARB_create_context
    [ 7.363] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 7.363] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 7.363] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 7.363] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 7.363] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 7.363] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 7.363] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 7.363] (II) AIGLX: Loaded and initialized nouveau
    [ 7.363] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 7.365] (II) NOUVEAU(0): NVEnterVT is called.
    [ 7.420] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
    [ 7.420] resize called 1920 1080
    [ 7.445] (II) Using input driver 'evdev' for 'Logitech-Illuminated'
    [ 7.445] (**) Option "CoreKeyboard"
    [ 7.445] (**) Logitech-Illuminated: always reports core events
    [ 7.445] (**) evdev: Logitech-Illuminated: Device: "/dev/input/by-id/usb-Logitech_Logitech_Illuminated_Keyboard-event-kbd"
    [ 7.503] (--) evdev: Logitech-Illuminated: Vendor 0x46d Product 0xc318
    [ 7.503] (--) evdev: Logitech-Illuminated: Found keys
    [ 7.503] (II) evdev: Logitech-Illuminated: Configuring as keyboard
    [ 7.503] (II) XINPUT: Adding extended input device "Logitech-Illuminated" (type: KEYBOARD, id 6)
    [ 7.503] (**) Option "xkb_rules" "evdev"
    [ 7.503] (**) Option "xkb_model" "pc104"
    [ 7.503] (**) Option "xkb_layout" "fr"
    [ 7.513] (II) Using input driver 'evdev' for 'Logitech-G100S'
    [ 7.513] (**) Option "CorePointer"
    [ 7.513] (**) Logitech-G100S: always reports core events
    [ 7.513] (**) evdev: Logitech-G100S: Device: "/dev/input/by-id/usb-Logitech_G100s_Optical_Gaming_Mouse-event-mouse"
    [ 7.583] (--) evdev: Logitech-G100S: Vendor 0x46d Product 0xc247
    [ 7.583] (--) evdev: Logitech-G100S: Found 12 mouse buttons
    [ 7.583] (--) evdev: Logitech-G100S: Found scroll wheel(s)
    [ 7.583] (--) evdev: Logitech-G100S: Found relative axes
    [ 7.583] (--) evdev: Logitech-G100S: Found x and y relative axes
    [ 7.583] (II) evdev: Logitech-G100S: Configuring as mouse
    [ 7.583] (II) evdev: Logitech-G100S: Adding scrollwheel support
    [ 7.583] (**) Option "Emulate3Buttons" "no"
    [ 7.583] (**) evdev: Logitech-G100S: YAxisMapping: buttons 4 and 5
    [ 7.583] (**) evdev: Logitech-G100S: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 7.583] (II) XINPUT: Adding extended input device "Logitech-G100S" (type: MOUSE, id 7)
    [ 7.583] (II) evdev: Logitech-G100S: initialized for relative axes.
    [ 7.583] (**) Logitech-G100S: (accel) keeping acceleration scheme 1
    [ 7.583] (**) Logitech-G100S: (accel) acceleration profile 0
    [ 7.583] (**) Logitech-G100S: (accel) acceleration factor: 2.000
    [ 7.583] (**) Logitech-G100S: (accel) acceleration threshold: 4
    [ 7.584] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 7.584] (**) Power Button: Applying InputClass "system-keyboard"
    [ 7.584] (II) Using input driver 'evdev' for 'Power Button'
    [ 7.584] (**) Power Button: always reports core events
    [ 7.584] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 7.584] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 7.584] (--) evdev: Power Button: Found keys
    [ 7.584] (II) evdev: Power Button: Configuring as keyboard
    [ 7.584] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
    [ 7.584] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 7.584] (**) Option "xkb_rules" "evdev"
    [ 7.584] (**) Option "xkb_model" "pc104"
    [ 7.584] (**) Option "xkb_layout" "fr"
    [ 7.584] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
    [ 7.584] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 7.584] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 7.584] (**) Video Bus: Applying InputClass "system-keyboard"
    [ 7.584] (II) Using input driver 'evdev' for 'Video Bus'
    [ 7.584] (**) Video Bus: always reports core events
    [ 7.584] (**) evdev: Video Bus: Device: "/dev/input/event11"
    [ 7.584] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 7.584] (--) evdev: Video Bus: Found keys
    [ 7.584] (II) evdev: Video Bus: Configuring as keyboard
    [ 7.584] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event11"
    [ 7.584] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
    [ 7.584] (**) Option "xkb_rules" "evdev"
    [ 7.584] (**) Option "xkb_model" "pc104"
    [ 7.584] (**) Option "xkb_layout" "fr"
    [ 7.584] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 7.584] (**) Power Button: Applying InputClass "system-keyboard"
    [ 7.584] (II) Using input driver 'evdev' for 'Power Button'
    [ 7.584] (**) Power Button: always reports core events
    [ 7.584] (**) evdev: Power Button: Device: "/dev/input/event0"
    [ 7.584] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 7.584] (--) evdev: Power Button: Found keys
    [ 7.584] (II) evdev: Power Button: Configuring as keyboard
    [ 7.584] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0"
    [ 7.584] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
    [ 7.584] (**) Option "xkb_rules" "evdev"
    [ 7.584] (**) Option "xkb_model" "pc104"
    [ 7.584] (**) Option "xkb_layout" "fr"
    [ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
    [ 7.585] (II) No input driver specified, ignoring this device.
    [ 7.585] (II) This device may have been added with another device file.
    [ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
    [ 7.585] (II) No input driver specified, ignoring this device.
    [ 7.585] (II) This device may have been added with another device file.
    [ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event17)
    [ 7.585] (II) No input driver specified, ignoring this device.
    [ 7.585] (II) This device may have been added with another device file.
    [ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event18)
    [ 7.585] (II) No input driver specified, ignoring this device.
    [ 7.585] (II) This device may have been added with another device file.
    [ 7.585] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event12)
    [ 7.585] (II) No input driver specified, ignoring this device.
    [ 7.585] (II) This device may have been added with another device file.
    [ 7.585] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event13)
    [ 7.585] (II) No input driver specified, ignoring this device.
    [ 7.585] (II) This device may have been added with another device file.
    [ 7.585] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event14)
    [ 7.585] (II) No input driver specified, ignoring this device.
    [ 7.585] (II) This device may have been added with another device file.
    [ 7.585] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/event23)
    [ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
    [ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
    [ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
    [ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
    [ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
    [ 7.585] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
    [ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
    [ 7.585] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/event23"
    [ 7.585] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Vendor 0x46d Product 0xc52b
    [ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found 20 mouse buttons
    [ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found scroll wheel(s)
    [ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found relative axes
    [ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found x and y relative axes
    [ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found absolute axes
    [ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Forcing absolute x/y axes to exist.
    [ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found keys
    [ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Configuring as mouse
    [ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Configuring as keyboard
    [ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Adding scrollwheel support
    [ 7.586] (**) evdev: Logitech Unifying Device. Wireless PID:4024: YAxisMapping: buttons 4 and 5
    [ 7.586] (**) evdev: Logitech Unifying Device. Wireless PID:4024: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 7.586] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.1/1-11.1:1.2/0003:046D:C52B.0006/0003:046D:C52B.0008/input/input26/event23"
    [ 7.586] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4024" (type: KEYBOARD, id 11)
    [ 7.586] (**) Option "xkb_rules" "evdev"
    [ 7.586] (**) Option "xkb_model" "pc104"
    [ 7.586] (**) Option "xkb_layout" "fr"
    [ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: initialized for relative axes.
    [ 7.586] (WW) evdev: Logitech Unifying Device. Wireless PID:4024: ignoring absolute axes.
    [ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) keeping acceleration scheme 1
    [ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) acceleration profile 0
    [ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) acceleration factor: 2.000
    [ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) acceleration threshold: 4
    [ 7.586] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/mouse1)
    [ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
    [ 7.586] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
    [ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
    [ 7.586] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/mouse1"
    [ 7.586] (EE) evdev: Logitech Unifying Device. Wireless PID:4024: Unable to query fd: Inappropriate ioctl for device
    [ 7.630] (EE) PreInit returned 2 for "Logitech Unifying Device. Wireless PID:4024"
    [ 7.630] (II) UnloadModule: "evdev"
    [ 7.630] (II) config/udev: Adding input device HD Webcam C525 (/dev/input/event25)
    [ 7.630] (**) HD Webcam C525: Applying InputClass "evdev keyboard catchall"
    [ 7.630] (**) HD Webcam C525: Applying InputClass "evdev keyboard catchall"
    [ 7.630] (**) HD Webcam C525: Applying InputClass "system-keyboard"
    [ 7.630] (II) Using input driver 'evdev' for 'HD Webcam C525'
    [ 7.630] (**) HD Webcam C525: always reports core events
    [ 7.630] (**) evdev: HD Webcam C525: Device: "/dev/input/event25"
    [ 7.630] (--) evdev: HD Webcam C525: Vendor 0x46d Product 0x826
    [ 7.630] (--) evdev: HD Webcam C525: Found keys
    [ 7.630] (II) evdev: HD Webcam C525: Configuring as keyboard
    [ 7.630] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2.1/1-11.2.1:1.2/input/input28/event25"
    [ 7.630] (II) XINPUT: Adding extended input device "HD Webcam C525" (type: KEYBOARD, id 12)
    [ 7.630] (**) Option "xkb_rules" "evdev"
    [ 7.630] (**) Option "xkb_model" "pc104"
    [ 7.630] (**) Option "xkb_layout" "fr"
    [ 7.630] (II) config/udev: Adding input device Microsoft X-Box 360 pad (/dev/input/event24)
    [ 7.630] (II) No input driver specified, ignoring this device.
    [ 7.630] (II) This device may have been added with another device file.
    [ 7.630] (II) config/udev: Adding input device Microsoft X-Box 360 pad (/dev/input/js1)
    [ 7.630] (II) No input driver specified, ignoring this device.
    [ 7.630] (II) This device may have been added with another device file.
    [ 7.630] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/event22)
    [ 7.630] (II) No input driver specified, ignoring this device.
    [ 7.630] (II) This device may have been added with another device file.
    [ 7.630] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/js0)
    [ 7.630] (II) No input driver specified, ignoring this device.
    [ 7.630] (II) This device may have been added with another device file.
    [ 7.631] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event19)
    [ 7.631] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 7.631] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 7.631] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "system-keyboard"
    [ 7.631] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
    [ 7.631] (**) Logitech Logitech Illuminated Keyboard: always reports core events
    [ 7.631] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event19"
    [ 7.631] (WW) evdev: Logitech Logitech Illuminated Keyboard: device file is duplicate. Ignoring.
    [ 7.663] (EE) PreInit returned 8 for "Logitech Logitech Illuminated Keyboard"
    [ 7.663] (II) UnloadModule: "evdev"
    [ 7.663] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event20)
    [ 7.663] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 7.663] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 7.663] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "system-keyboard"
    [ 7.663] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
    [ 7.663] (**) Logitech Logitech Illuminated Keyboard: always reports core events
    [ 7.663] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event20"
    [ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
    [ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found 1 mouse buttons
    [ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found scroll wheel(s)
    [ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found relative axes
    [ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing relative x/y axes to exist.
    [ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found absolute axes
    [ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing absolute x/y axes to exist.
    [ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
    [ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as mouse
    [ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
    [ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Adding scrollwheel support
    [ 7.663] (**) evdev: Logitech Logitech Illuminated Keyboard: YAxisMapping: buttons 4 and 5
    [ 7.663] (**) evdev: Logitech Logitech Illuminated Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 7.663] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.1/0003:046D:C318.0002/input/input23/event20"
    [ 7.663] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 13)
    [ 7.663] (**) Option "xkb_rules" "evdev"
    [ 7.663] (**) Option "xkb_model" "pc104"
    [ 7.663] (**) Option "xkb_layout" "fr"
    [ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: initialized for relative axes.
    [ 7.663] (WW) evdev: Logitech Logitech Illuminated Keyboard: ignoring absolute axes.
    [ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) keeping acceleration scheme 1
    [ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration profile 0
    [ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration factor: 2.000
    [ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration threshold: 4
    [ 7.663] (II) config/udev: Adding input device Logitech G100s Optical Gaming Mouse (/dev/input/event21)
    [ 7.663] (**) Logitech G100s Optical Gaming Mouse: Applying InputClass "evdev pointer catchall"
    [ 7.663] (**) Logitech G100s Optical Gaming Mouse: Applying InputClass "evdev pointer catchall"
    [ 7.664] (II) Using input driver 'evdev' for 'Logitech G100s Optical Gaming Mouse'
    [ 7.664] (**) Logitech G100s Optical Gaming Mouse: always reports core events
    [ 7.664] (**) evdev: Logitech G100s Optical Gaming Mouse: Device: "/dev/input/event21"
    [ 7.664] (WW) evdev: Logitech G100s Optical Gaming Mouse: device file is duplicate. Ignoring.
    [ 7.690] (EE) PreInit returned 8 for "Logitech G100s Optical Gaming Mouse"
    [ 7.690] (II) UnloadModule: "evdev"
    [ 7.690] (II) config/udev: Adding input device Logitech G100s Optical Gaming Mouse (/dev/input/mouse0)
    [ 7.690] (II) No input driver specified, ignoring this device.
    [ 7.690] (II) This device may have been added with another device file.
    [ 7.690] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
    [ 7.690] (II) No input driver specified, ignoring this device.
    [ 7.690] (II) This device may have been added with another device file.
    [ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event7)
    [ 7.690] (II) No input driver specified, ignoring this device.
    [ 7.690] (II) This device may have been added with another device file.
    [ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event8)
    [ 7.690] (II) No input driver specified, ignoring this device.
    [ 7.690] (II) This device may have been added with another device file.
    [ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event9)
    [ 7.690] (II) No input driver specified, ignoring this device.
    [ 7.690] (II) This device may have been added with another device file.
    [ 7.690] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
    [ 7.690] (II) No input driver specified, ignoring this device.
    [ 7.690] (II) This device may have been added with another device file.
    [ 7.690] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event4)
    [ 7.690] (II) No input driver specified, ignoring this device.
    [ 7.690] (II) This device may have been added with another device file.
    [ 7.690] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event5)
    [ 7.690] (II) No input driver specified, ignoring this device.
    [ 7.690] (II) This device may have been added with another device file.
    [ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event6)
    [ 7.690] (II) No input driver specified, ignoring this device.
    [ 7.690] (II) This device may have been added with another device file.
    [ 7.691] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
    [ 7.691] (II) No input driver specified, ignoring this device.
    [ 7.691] (II) This device may have been added with another device file.
    [ 14.821] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
    [ 14.821] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 14.821] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 14.821] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 14.821] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 14.821] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 14.821] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 14.821] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 14.821] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 14.821] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 14.821] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 14.821] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 14.821] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 14.821] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 14.821] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 14.963] resize called 3840 1080
    [ 15.466] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
    [ 15.466] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 15.466] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 15.466] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 15.466] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 15.466] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 15.466] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 15.466] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 15.466] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 15.466] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 15.466] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 15.466] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 15.466] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 15.466] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 15.466] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 15.747] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
    [ 15.747] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 15.747] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 15.747] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 15.747] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 15.747] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 15.747] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 15.747] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 15.747] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 15.747] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 15.747] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 15.747] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 15.747] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 15.747] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 15.747] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 15.947] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
    [ 15.947] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 15.947] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 15.947] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 15.947] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 15.947] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 15.947] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 15.947] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 15.947] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 15.947] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 15.947] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 15.947] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 15.947] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 15.947] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 15.947] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 16.180] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
    [ 16.180] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 16.180] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 16.180] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 16.180] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 16.180] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 16.180] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 16.180] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 16.180] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 16.180] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 16.180] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 16.180] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 16.180] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 16.180] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 16.180] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 16.398] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
    [ 16.398] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 16.398] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 16.398] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 16.398] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 16.398] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 16.398] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 16.398] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 16.398] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 16.398] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 16.398] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 16.398] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 16.398] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 16.398] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 16.398] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 16.705] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
    [ 16.705] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 16.705] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 16.705] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 16.705] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
    [ 16.705] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 16.705] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 16.705] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 16.705] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 16.705] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 16.705] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 16.705] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 16.705] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 16.705] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 16.705] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 3613.510] (II) config/udev: removing device Logitech Unifying Device. Wireless PID:4024
    [ 3613.557] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Close
    [ 3613.557] (II) UnloadModule: "evdev"
    [ 3613.617] (II) config/udev: removing device HD Webcam C525
    [ 3613.647] (II) evdev: HD Webcam C525: Close
    [ 3613.647] (II) UnloadModule: "evdev"
    [ 3614.988] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/js0)
    [ 3614.988] (II) No input driver specified, ignoring this device.
    [ 3614.988] (II) This device may have been added with another device file.
    [ 3614.988] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/event23)
    [ 3614.988] (II) No input driver specified, ignoring this device.
    [ 3614.988] (II) This device may have been added with another device file.
    [ 3614.989] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/mouse1)
    [ 3614.989] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
    [ 3614.989] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
    [ 3614.989] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
    [ 3614.989] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/mouse1"
    [ 3614.989] (EE) evdev: Logitech Unifying Device. Wireless PID:4024: Unable to query fd: Inappropriate ioctl for device
    [ 3615.023] (EE) PreInit returned 2 for "Logitech Unifying Device. Wireless PID:4024"
    [ 3615.023] (II) UnloadModule: "evdev"
    [ 3615.023] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/event22)
    [ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
    [ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
    [ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
    [ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
    [ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
    [ 3615.023] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
    [ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
    [ 3615.023] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/event22"
    [ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Vendor 0x46d Product 0xc52b
    [ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found 20 mouse buttons
    [ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found scroll wheel(s)
    [ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found relative axes
    [ 3615.02

    shillshocked wrote:Since version 1.12, LightDM now relies on systemd-logind for seat
    management. It means LightDM van load seats automatically as they are added
    from logind.
    Ha! I searched something like that during my investigations, I was wondering if it wasn't about the recent logind changes, but I gave up due to the lack of documentation

Maybe you are looking for