After update to 10.6.4 MacBook wont login

Hi,
As the title says, I have just updated my MacBook to 10.6.4 (was on 10.6.3) via Software Update. The update went fine, it was not interuppted, and I watched the system shut down and restart in verbose mode, everything looked normal. Upoun the reboot I discovered after entering my password the screen will go blue as normal, but then it goes straight back to the login window, rather than to my desktop. I have managed boot onto the snow leopard cd repair permissions etc, that hasnt helped. I can also boot fine via safe boot. Console does not show anything relating any login problems.
Anyhelp would be greatly appreciated.
Cheers
Patrick

Have you found an answer to this? I have just updated a MacBook and a New iMac and am having the same issue. The iPod will show up in iPhoto but not in iTunes.

Similar Messages

  • After updating to mavericks on my MacBook, the screen keeps saying "setting up your mac." It has been like this for hours! How can I make it go faster?

    After updating to mavericks on my MacBook, the screen keeps saying "setting up your mac." It has been like this for hours! How can I make it go faster? It's has been like this for 4 hrs.

    I don't think your mac is setting up. It's stuck.
    I would:
    hold the power button until it shuts down
    unplug all peripherals
    do a safe boot (restart and hold down the shift key until you see the apple logo).
    If it starts up in a safe boot, then you can try restarting with a normal boot.
    If it does not start with a normal boot, then you probably have some incompatible third party software. Likely culprits are:
    MacKeeper
    CleanMyMac
    third-party antivirus software
    any other "cleaning" or "optimizing" or similar third party "utilities".
    A good place to start would be to uninstall any of those (while in safe mode) and then restart.

  • After updating when i close itunes it wont open back up until i log off and log back on or reboot

    After updating to latest software when i close itunes it wont open back up until i log off and log back on or reboot. Now I have removed itunes and reinstalled it but same problem

    jordN wrote:
    This only started happening after I upgraded from Windows 8.1 to Windows 10, I don't have a clue why it does it, but if I close the screen on my laptop and open it, the screen doesn't come back on it just stays off but the power light button comes on and the WiFi signal button is on but it is red as if the wifi is turned off, is anyone else having this problem or does anyone know how to fix it? I have to manually hold down the power button everytime I close my laptop to turn it off and then back on and once it is on it works perfectly, but I don't like holding the power button down for obvious reasons. Thank you.Go back to Windows 10, seems HP do not care about releasing up to date drivers for Windows 10, this is despite the problem you report also happening during BETA Testing of Windows 10 over TWELVE MONTHS AGO! It is only now HP are bothering to advise people not to upgrade, but yet they clearly won't reply in this topic, which is more or less about your problem from many different users! http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Windows-10-Laptop-won-t-go-into-sleep-mode/m-p/5181173#M304826

  • 4s iphone after updating 6.0 today, my facetime wont allow me to be reached at my phone number. what to do? thx

    my facetime in settings  on my phone had2 emails and the cell phone number highlighted in blue and a check next to them. After updating to 6.0 newest bug fix, my phone number is not in blue, it is gray in color and will not allow facetime to reach my phone by this number. I am sure its a quick fix but WHAT?
    Thanks

    I Just found it on the apple site, it arrived on a cd a few days later and worked just fine again.
    i would recommend backing everything up just in case. Better safe than sorry, trust me. I've lost so much when i didnt back up once when re-installing the system.
    IT shoulldnt erase everything, bt it might, so back up just in case
    should you loose everything, then i have some tips on moving stuff fromyour iphone/ipod to the computer

  • Problem after update to 10.9.3 rMBP - no login panel

    Hi,
    After update to 10.9.3 I don't run the rMBP. After press power button I pressed Cmd+S, then mount -uw / and cat /var/log/system.log.
    fsck ok
    What to do? I can't work. I must run MBP without reinstall OSX.

    OS X Mail: Troubleshooting sending and receiving email messages

  • Macbook wont login

    macbook wont go past login screen it will start to login but go back to login screen

    Wrong forums. These are for Snow Leopard, not Leopard.

  • Various Issues After Update To Bootcamp 3.2 (MacBook Pro, WindowsXP)

    Hi all,
    i'm experiencing various issues after i updated to Bootcamp 3.2.
    I first was running Bootcamp 3.0 (everything worked just fine, except some nv4_disp.dll bluescreens). I updated to Bootcamp 3.1 and then to Bootcamp 3.2.
    Everything seemed to be fine firstly, but now i noticed various issues:
    1. I can't access the Bootcamp control panel (crashes when i try to open it (applecontrolpanel.exe at Offset 0004703a)
    2. Everything USB doesn't seem to work (except external USB drives), like USB printer does not print, camera attached via USB does not import photos)
    When i check the Driver-Manager i'm seeing multiple USB hubs, root hubs and host conrollers (4 root hubs, 2 openHCD usb host controller, 2 usb hubs...). When i try to configure the USB port the printer is connected to i also get an error ("not supported").
    3. When i try the extended display settings i'm getting an "NVIDIA display panel extension can't be displayed".
    MacBook Pro 13inch, Windows XP MediaCenter Edition (SP3), NVIDIA GeForce 9400M.
    Thanks: Lars

    Answered my own question, but want to post how I did it in case other users have the same problem.
    I am assuming this issue appeared because I live in Canada. When I installed the Bootcamp 3.2 update, for some reason it changed my regional language of my system to French (Canada) - Canadian Multilingual (Apple)
    To change it back I went in Windows XP to Control Panel, Regional and Language Options. Languages tab. Under Text services and input languages clicked Details.
    Under settings tab changed Default Input Language from French (Canada) - Canadian Multilingual (Apple) to English (Canada) - US. Click apply.
    Wait...it was working, but in the time it took me to type this it suddenly reverted and Im back to weird character mappings inspite of the language setting being changed.

  • After updating to lion, Itunes 10.4 wont open.

    I updated while on SL, and it worked fine. But as soon as i got on Lion it keeps giving me this error:
    Dyld Error Message:
      Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
      Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
      Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
    HELP?

    No.  The only way I finally got it to work was after about 5 restarts.  I've never seen iTunes flip out like that before.

  • After updating to io5 my front camera wont work, have done a restore but still no good,any ideas anyone

    I have an iphone 4 and have updated it to io5, the camera on the front does not work now, it will not open the shutter, I restored it but still no joy, has any one had this before and how do I fix it please

    I am having the SAME problem. It is making me want an Android this is so FRUSTRATING! Here's my issue:
    I have an iPhone 4 with 5.1.1. It fairly recently decided to have tons of issues connecting to Wifi. The 2 places I connect to Wifi are my home and my work. At home, my phone manages to about 95% of the time find the wifi signal, but I have to go manually put in my wifi password every time I want to connect, otherwise it'll just stay on 3G. When it doesn't find the signal I have to keep refreshing it and it eventually finds it.
    At work, the wifi that EVERYONE else uses, I have the most trouble connecting to. I have to manually go into my wifi settings and find the signal. That is IF it actually finds it. About 50% of the time it just doesn't find it. Then about 40% of the time it sees it, but when I try to connect it says "Unable to join the network "SEWELL"" (that's the name of the Wifi). Then about 10% of the time I can find it and connect to it. AND then sometimes when I am finally connected it'll just kick me off in the middle of browsing and I'll go back to 3G. This happens with work and home.
    I have tried EVERY troubleshooting method. I reset the network settings, I soft reset the phone, I did a full restore and deleted everything and still it doesn't work. I reset it all the time trying to get it to work and it just does nothing.
    Any other suggestions or am I just going to have to deal with it until the Samsung Galaxy S III comes out?
    Do you think if I took it to an Apple store they would replace it and that might help (iPhone 4 probably had it for over a year)? I know other people with iPhones (3G and 4's) and theirs work fine so I don't know how it can be the Apple 5.1.1 update?
    HELP APPLE!!!!

  • After updating my Mac mini gets to the login screen, but I can't click on anything.  The arrow is there and I can move it around, but doesnt allow me to click on anything

    I have a Logitech mouse and keyboard that worked fine before the update. Now I can't get past the login in screen, because I'm unable to click on anything.  I have the arrow and it moves around,but won't click on anything

    Try using the arrow keys to move around. Press enter to the account you want to go to. I don't know if you can access the password bar after this... it's all I know for now.

  • After updated latest vision and restore my ipad, login my apple id, nothing happened to my ipad, what i have to do next ?

    Ipad 2, 64GB
    my ipad disabled cause of typed too many time passcode
    i have been tried recovery mode, my ipad still disabled.  I login my apple id, anything i can do there?

    Could it be that you or your daughter used your daughters Apple ID to install these apps? Make sure that your Apple ID is set up in "Settings > iTunes & App Stores" then delete the Apps when your daughters ID appears and then re-download them again by using your own Apple ID. This should fix the problem.

  • After updating OS to 10.9.3 iTunes can't see my iPhone over Wi-Fi.

    After updating OS on my Retina MacBook Pro to Mavericks 10.9.3 with iTunes 11.2 I succesfully transfer one album over Wi-Fi to my iPhone 5 with iOS 7.1.1.
    Then I decided to transfer another, but when I drop the albums to iPhone on my iTunes,
    iTunes start to Looking for iPhone and the phone dissapeard.
    I tried to restarting the iTunes and the problem was same. First I saw iPhone connected but when tried to transfer music it dissapeard same way.
    I tryed to restart my MacBook but from there can't see my iPhone anymore.
    I checked that the MBP and iPhone are on same network.
    Thanks for any tips.

    After a while it start to work.... No problems.

  • HT201210 After updating my iphone. Only the logo and connect to itunes on the screen.

    After updating and system restore my iphone wont open. only the logo and connect to itunes on the screen.

    Hello nicolajan,
    Thank you for contacting Apple Support Communities.
    I see you linked here from TS1275, that is where I would recommend you starting to troubleshoot this issue. Did you follow the steps in that article? If not, here is that link again and I would recommend following all of the steps outlined there.
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/TS1275
    If that doesn't resolve the issue, then you can move on to this article for more advanced troubleshooting.
    Resolve iOS update and restore errors
    http://support.apple.com/kb/TS3694
    Regards,
    Jeff D.

  • Mac OS X lion update but after updating D: drive partition is missing is missing any help

    Hello I have just updated to Mac OS X lion but after updating when I restarted my macbook pro into windows 7 via boot camp I notice that my D:/ drive partition is missing.
    More Details:
    Before OS x Lion I was using windows 7 on macbook pro that I have installed via boot camp. After windows installation I have create an other partition from boot camp drive but now when I updated OS x lion my windows 7 D drive is missing but windows is restarting and working properly just No D drive (250 GB).
    Any help ?

    ..Step by Step to fix your Mac
    Erase, formatting, OS X installs on Mac's
    http://www.everymac.com/ultimate-mac-lookup/
    http://mactracker.ca/
    https://support.apple.com/kb/HT1237
    https://support.apple.com/kb/HT2213

  • Re: Personal Account number changed after update

    Personal Account number changed after updating Virtualstore and now I can't login with my current account information. Changed from 35482 to 35555

    i have created already an account after reset but then asked for an update. I did it and now asks for username and password :) still says incorrect username/pass

Maybe you are looking for

  • Mail search not working after clean install of 10.5.4 on new 20" iMac

    Apple Mail search is not working. Search on "subject line" works, but search on "entire message" does not. For example, searching with "parking" yields NO results, and there are many messages with the word "parking" in their body in the mailboxes. It

  • How to modify a VO? Help please

    I am trying to modify a VO in sales (just have to change the where clause), went thru the tutorial but 'am not sure if I am doing it right. Do I have to export the complete full java_top to my machine and then modify the VO? Can somebody please give

  • Print Image Format..please clarify!!

    Ok, so I want to prepare my images in PS CS6 for print. I have read several articles that TIFF files print best since they do not lose any information but sometimes you can barely see the difference from a TIFF to a JPEG. However, I have also been to

  • I need create a new database in bpa

    Hello need to create a new database in the repository of BPA in the new server added apart from the local database. When I say create nothing happens. Thanks ...

  • Concatinating a field from several records into a single string

    Using Crystal Reports 11 I have a table of EMS/Fire runs, with a related table of fire trucks that respond on each run.  My report is grouped by EMS/Fire run, and then the details section shows each truck, something like this.... Run #1 |  123 E Main