After update to Mac OS X Lion i cannot burn discs?

Hello everyone,
I recentrly updated my macbook to Lion but after that I just cant burn any disc on itunes. Just when the disc is writting the fourth song i hear the disc stopping and after 30 seconds i get this message>  "the attempt to burn a disc failed the burn failed because os a medium write error". I tried this 10 times having the same result.
I need help! I havent had this problem before updating to Lion. With Snow Leopard everything was OK.
Thank you.
I currently have the 10.7.3

Either take it into your local Apple Store or if you really believe it is lion causing it and not a faulty DVD drive then reinstall Snow Leopard from your last SL backup and see if it works again. Personally I would go with the first one as updating an OS can excenuate a problem that was underlying in the previous OS,
Good luck
Pete

Similar Messages

  • No internet using wifi after update to Mac OS X Lion.

    After I have updated to Mac OS X Lion, I can't access to internet. My computer is iMac 20-inch, Mid 2007. can access to internet only with ethernet. I use onlu his wi-fi adapter. Nothing additional. My wi-fi adapter is Airport. I t workes on other computers near me on Snow Leopard. Tryed everything. Nothing helps!
    pleas, help. Thanks!

    I have a similar problem. Does the network show up? It shows up for me, but does nothing when clicked. Entering information manually using Join Other Network is my temporary solution.
    My question.

  • Keyboard Illumination Gone after updating to mac os x lion.

    Hi all.
    Im using my mid 2009 macbook pro more than 3 years now. i havent had any problems with my keyboard backlight. About 3 days ago i bought Mac OS X Lion and installed it, and the backlight is gone. The F5 - F6 buttons does nothing. And also "automatic keyboard illumination" option from system preference is also gone. Im sure that there is no hardware fault. I installed labtic software and it does illuminate my keyboard. so i know that my hardware is not broken. I think the Mac os x installer read my hardware wrong. Does any one have this issue? Can any body help me to get back my keyboard illumination? Thank you. Sorry for my English.

    Could not find any solution through Google. Unfortunately I have to use my Macbook Pro without its most beautiful feature, "KEYBOARD BACKLIGHTING". No disrespect to LABTIC. But I don't like using it. If any body have any idea how to solve my problem I would be gratefully if you shared with me. Thank you OGELTHORPE and dominic23 for your kind advices.

  • IMac 21.5 slow after updating to Mac OS X Lion 10.7.5

    About a year ago I updated my iMac 21.5 from mountain lion to OS X Lion 10.7.5. Since I did that, it has really been slow. For example - it takes around 5 minutes to start my Mac! And not just that, when I start it (after 2 minutes) the login pops up. I click on restart because the Mac started wrong (it´s kind of hard to explain... But, Mac is known for  soft design, and when the login page pops up, it´s really, really slow and... can I say hard?).... The Mac starts over again and next time I don´t need to login. I just come to the frontpage directly. And this time it´s soft and the way it´s supposed to be. It´s still slow.
    What have I done?

    See:
    Mac Maintenance Quick Assist,
    Mac OS X speed FAQ,
    Speeding up Macs,
    How to Speed up Macs, ,
    Macintosh OS X Routine Maintenance,
    Essential Mac Maintenance: Get set up,
    Essential Mac Maintenance: Rev up your routines,
    Maintaining OS X, 
    Five Mac maintenance myths and
    Myths of required versus not required maintenance for Mac OS X for information.

  • Mac won't restart after updating to OS X Mountain Lion

    Mac won't restart after updating to OS X Mountain Lion. Please help?

    Like what happens?  Is it just spinning?
    If you've waited sufficiently long (say 10 minutes) you could just hit the power button which will do the trick.  A little more gentle would be to open a terminal window (if you can) and type 'sudo reboot' (without the quotes) and enter your password when it asks.  That will do it too.

  • After updating my mac from snow leopard to mountain lion, i can not connect to the internet anymore

    After updating my mac book pro from snow leopard to mountain lion, i can not connect to the internet anymore ;(
    Anyone know what is wrong with it??
    Is something wrong with mountain lion or the wifi itself????
    HELP PLEASE!!
    I need to use the internet desperately but i cant...
    Thank you so much xxx

    Hi galleryskins,
    The article below may be able to help you with this issue.
    Click on the link below to see more details and screenshots. 
    I've quoted some helpful highlights for you:
    OS X Mountain Lion: Zoom content on the screen
    Zoom with a mouse or trackpad
    To zoom in and out, hold down the modifier key you specified while you perform the scroll gesture.
    For example, if you have a trackpad and used the default settings, zoom in by holding down the Control (^) key while you drag two fingers up on the trackpad. Zoom out by holding down the Control key while you drag two fingers down on the trackpad.
    If you chose Picture-in-picture zooming, a window appears near the mouse cursor with the magnified image. If you chose Fullscreen zooming, the entire screen displays the magnified image.
    I hope this information helps ....
    Have a great day!
    - Judy

  • Updated my mac to mountain lion 10.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install? Can anyone help me?

    updated my mac to mountain lion 10.7.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install saying that I need to see developer. Whenever I try to open my appstore, mail or facetime it says that the programmes need to be installed and might not be compatible with this version of mac operating system. Can anyone help me?

    It's not a bad install of Mountain Lion. I've had the same thing happen to me, but it affected not only Mail, but a variety of other programs including iPhoto and MS Office, where I had to delete preferences, caches, and reinstall the OS as well as the program itself. I'm still having issues with Mail, so I've gone to another program.
    Everything was fine upon the initial install. I restarted my iMac about two weeks after the install, and that's when the issues began to happen. I've reinstalled Mountain Lion twice, but the same issues arise.
    As I mentioned above, you'll need to figure out which preferences are causing the issue, then reinstall the program, as a fresh reinstallation will do you no good unless you wipe the drive completely.
    Here's a thread that helped me with iPhoto:
    https://discussions.apple.com/thread/4794375?start=0&tstart=0

  • Should I repair permissions before or after updating to Mac OS X 10.7.2?

    Hi,
    Should I repair permissions before or after updating to Mac OS X 10.7.2? or should I fix permissions before and after the update?

    This is not a routine maintenance. Upgrades can be screwed up if the system that is upgraded is screwed up. I believe in a "better safe than sorry" approach. If you repair permissions and the hard drive prior to an upgrade then if there be a problem perhaps that problem will not propagate to the new upgraded system. If there are no problems doing the repairs is harmless.
    When it comes to the topic of permissions repairs there are many opinions but not much fact. In other words there doesn't appear to be a formal analysis of whether repairing permissions is only useful when a permissions problem arises. But there is a lot of anecdotal evidence suggesting that a repair both before and after a major system upgrade can reduce the risk of problems.
    This is my opinion on the matter. I do not generally disagree with Niel or MacJack, but as I said I prefer to be safe rather than sorry.
    Here's my general approach:
    How to Install Lion Successfully - You must have Snow Leopard 10.6.7 or 10.6.8 Installed
    A. Repair the Hard Drive and Permissions:
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.3.) if DW cannot fix the drive, then you will need to reformat the drive and reinstall Snow Leopard.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the backup volume. Source means the internal startup volume.
    C. Important: Please read before installing:
    If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.  While the installation is in progress do not use the computer.
    D. To upgrade to Lion:
    Purchase the Lion Installer from the Mac App Store. The download will start quickly. Lion is nearly 4 GBs so a fast internet connection is essential. Download time could run upwards of 4 hours depending upon network conditions and server demands at the time.
    Boot From The Lion Installer which is located in your Applications folder.
    Follow instructions for installation.

  • HT1338 After updating my mac to the new operating system I have had several problems.  Now my printer program is not working.

    After updating my mac to the new operating system I have had several problems.  Now my printer program is not working.
    Do you have any suggestions?

    Start by telling us what printer you hope to use.
    Look at the printer manufacturers site to see if they have a 10.9 print driver.
    Assuming you have tried to delete & re-add the printer it's possible that the model is no longer supported.
    You can also try the printing system reset…(I think 10.9 is the same as the Lion instructions).
    http://support.apple.com/kb/HT1341
    If the model is supported you should be able to add it & the driver will be downloaded.

  • Adobe Photoshop CS2 Error messages after update to mac os 10.4.6

    After updated to mac os 10.4.6 everytime I use Photoshop CS2 I receive an error message "Could not complete your request because of a program error"
    I did all the workarounds that were described in document 331627 from Adobe's website and nothing worked.
    I also subscribe to maxosx.com support and someone suggested removing the legal.localized/Tien...file from the photoshop cs2/legal directory, but everytime I tried to select the directory "legal" from within the finder view, it disappeared and closed the finder window.
    HELP!

    Did you upgrade from a previous version of OS X like 10.3.x or 10.2.x or from a prior version of 10.4.x? If the former, there are probably some files in your previous system folder that need to be restored.
    Otherwise, double click Photoshop when it's closed, and then IMMEDIATELY hold Command + Option + Shift. You'll get a box for resetting the settings. Select Yes and maybe that will help.
    --Ryan

  • HT2506 After updating my system to Mountain Lion 10.8.2 I can no longer view videos on Facebook or other sites. The only one I can view videos on is youtube. I have downloaded Adobe Flash player and still no luck. I cannot even open Preview on my computer

    After updating my system to Mountain Lion 10.8.2 I can no longer view videos on Facebook or other sites. The only one I can view videos on is youtube. I have downloaded Adobe Flash player and still no luck. I cannot even open Preview on my computer anymore. Any ideas would be helpful thanks

    Merely clicking the Preview icon in the Dock doesn't cause it to open anything, unless you had one or more windows open the last time it quit.
    If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test.
    1. If you're getting a "blocked plug-in" error, triple-click the line below to select it:
    /Library/Internet Plug-Ins Right-click or control-click the highlighted text and select
    Services ▹ Open
    from the contextual menu. A folder should open. If there is more than one item in the folder with the words "Flash Player" (not "flashplayer") in the name, open the respective Info windows, check the version numbers, and delete all except the latest. You may be prompted for your login password. If you get the same error after doing that, re-download and reinstall Flash. Download it from this page:
    Adobe - Install Adobe Flash Player
    Never download a Flash update from anywhere else.
    2. If you get a "missing plug-in" error, select
    Safari ▹ Preferences... ▹ Security
    from the Safari menu bar and check the box marked Enable plug-ins.
    3. Select
    Safari ▹ Preferences... ▹ Extensions
    from the Safari menu bar. If any extensions are installed, disable them.
    4. In the Safari preference window, select
    Privacy ▹ Remove All Website Data
    Close the window. Then select
     ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Delete All. Close the preference pane.

  • IWeb Problems after updating to Mac OS X 10.6.3

    "iWeb quit unexpectedly while using the SFWordProcessing plugin"
    - This message comes up every time I try to click on the homepage or "welcome" section. I had a similar problem with 10.6.2 but that was quickly solved by removing the Hoefler text. I have also tried removing the p.list and iweb domain file but nothing has been successful yet.
    Any help would be appreciated.

    Welcome to the Apple Discussions. Try the following fixes:
    The million dollar trick or how to fix iWeb in 10.6.2
    iWeb & iWork: Applications may suddenly quit after updating to Mac OS X v10.6.2
    OT

  • Can't play mov files after update for MAC OS 10.6.8. Can't edit in Final cut anymore!

    can't play mov files after update for MAC OS 10.6.8. Can't edit in Final cut anymore!. SHould i by a registration code for QT 7 Pro? I can't play mov files at all.. they were okay in my final cut time line. Now i can't see them!!! I can't import movies from my camera!!!
    Help from Brazil!!!
    Tks

    David,
    tks for your help !!!
    Hi people, first, tks for Birdman308 for his link
    https://www.hightail.com/dl?phi_action=app/orchestrateDownload&rurl=https%3A%2F% 2Fwww.hightail.com%2Ftransfer.php%3Faction%3Dbatch_download%26batch_id%3DOGhkZ28 xeWFiV3dYRHRVag
    and makbookpro as well for his link
    http://blog.lib.umn.edu/mcfa0086/discretecosine/164630.html
    Now i can back to work!!!

  • TS3147 Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers!  Everything is connected but I get an "idle" message in the queue.  I have "Reset printer system" and re-added these printers. No luck. H

    Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers!  Everything is connected but I get an "idle" message in the queue.  I have "Reset printer system" and re-added these printers. No luck. Help?

    Hello,
    It isn't the fw in Network you want o use or look at, that's for something completely different.
    My first suspect is the Power Adapter on the LaCie has gone.
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
    Reset the Firewire bus
    If your Firewire or USB isn't recognizing any device.  A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
    1. Shut the machine down.
    2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
    3. leave it for 10 minutes.
    4. Connect back up and reboot.
    http://www.macmaps.com/firewirebug2.html

  • HT2476 After updating to OS X Mountain Lion, there is a password locked pdf document in the Downloads Stack. Does anyone know what password is required to access this file?

    After updating to OS X Mountain Lion, there is a password locked pdf document in the Downloads Stack. Does anyone know what password is required to access this file?

    Hello, if your install disk is locked (I assume with FileVault) there is no way to change the password. If it weren't locked there were at least two solutions. As far as I know, the only solutions now are:
    - contact your dad
    - erase and reinstall the OS X clean
    Let us know.

Maybe you are looking for