After update to version 4.4 optical out not working

Does anybody experience the same problem? After todays update to ios5 (version 4.4) the optical output does not work anymore. I have the problem on all Apple TV's with different audio systems. Any help?

I also have an issue on my Apple TV, but unsure if it is the ports out or the device itself. I have tried resetting it, reboting Airport, nothing works....
I was streaming some Radio music while performing the update and it simply stopped...as I thought it was an odd coincidence, I decided to do an update to the Apple TV. It stated it would be a bit less than 20 min to update. I checked on it in about an hour and the TV no longer displayed the device and the device itself was blinking rapidly.
I also tried to reset it via the remote...holding down the buttons for 6 seconds...I tried 3 or 3 times. The light acted as if it was resetting, but it then reverted back to the rapid blinking.
I need to get this resolved....

Similar Messages

Hello. After updating to version 7.0.2 was not on the phone face time application why?

Hello. After updating to version 7.0.2 was not on the phone face time application why?

If your phone was originally sold in KSA or UAE, facetime is permanently removed from it. If you are in one of those countries, and your friends have facetime on their phones, then they were originally sold in a different country.

Soundblaster X-Fi Titanium Optical Out not working???

Hey friends,
I purchased a Sound Blaster X-Fi Titanium PCIe yesterday to run on Windows 7 64bit to trigger VSTi instruments. I can hear the VSTi play fine when I have headphones plugged into the soundcard but I want to send the audio sound OUT via the Optical Out into my Steinberg MR86x firewire audio card. ?
I can see the light on the optical cable but no sound seems to be being sent from the sound blaster into the steinberg card.
?Now before people start saying you cant do that, I have have been doing this for the last 3 years and it has been great apart from my RME Audio card is not compatible with Windows 7 64bit hence why I purchased the soundblaster.
I really am at a loss as to what I can try next, I have been through this forum and tried a few recommended tweaks but nothing? Am I missing something obvious here?
I am using the following drivers
Driver: v2.7.008 Windows 7 64bit
DTS Connect: for Windows 7 64bit
Also in the Audio Control Panel / SPDIF I/O all options are greyed out apart from the Digital Output tickbox, I only want to use this card for Audio as in creating music or specifically for triggering VST synths.
I would really appreciate any advice
Thanks in advance
KiloHurtz

Re: Soundblaster X-Fi Titanium Optical Out not working?I have same card, same?OS?and lots of problems.
Analog outputs(control panel->sound->speakers) disappears when boot or reboot, sometimes it works week, sometimes a hours. When it works, it's works ok, but suddenly during boot,?all sounds is lost, when trying launch for example Creative Audio Control Panel this message appears: There are no supported audio device available. You need to close the application. Click OK to close the application now.
And when analog outputs disappears, no any sound via SPDIF, even it shows in notification area and control panel->sound and in device manager.
I have owned card about two months, once change card in warranty, and?several uninstall, cleaning traces, reinstall and card works for while?and?out of blue, when boot computer, no sounds at all and only way to get sounds back is driver uninstall, cleaning and reinstall.
Creative Customer Support seems to be clueless, but make Technical Support Request if problems continue. And all other too, if problems like that appears, contact to Creative, maybe they really try?to do?something abuot it and not just send instructions how to uninstall and reinstall drivers.

HT201210 After updating to ISO 6, iTunes Match is not working on iPad.

After updating to ISO 6, iTunes Match is not working on iPad. How can I fix this?

After over an hour it completed and my albums appeared to be available, however when I go into songs they are blank!
Can't access anything! Pics attached

I have iPhone 3G with ios 4 but now i update new version and my phone is not working.it is not activating..when i tried it says please insert sim and try again..any one plez hepl.

i have iPhone 3G with ios 4 but now i update new version and my phone is not working.it is not activating..when i tried it says please insert sim and try again..any one plez help

Try this article if you haven't already
This is the only possibility that came to my mind when reading about your issue:
"If an iPhone, iPad, or iPod touch is not recognized in iTunes on Windows, the Apple Mobile Device Service (AMDS) may need to be restarted"

HT4623 after updating the iOS6 my iPhone 4 is not working

after updating the iOS6 my iPhone 4 is not working

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

5.1 to home theater receiver thru Optical Out not working; Fatality Platinum

I tried connecting the Optical Out on the front to my receiver's optical in. Made sure everything was set to 5. in both the Creative and receiver settings, and the receiver gets optical 5. just fine with my Play Station version 3 and X-box version 360 gaming computers. Please help, I have tried reboot, messing with settings, Google, I cannot fix this.
Jinwoo from great korea!

Hi I have the same probleme, exept that I have succesfuly pluged my home theater receiver and the 5.1 works. Just my subwoofer seems not to work properly. Like when I plug it into a digital dvd player it works very nicely. but when pluged into the sound card it seems that it dosnt have any signal for it.
ANy clues??? I know i pluged everything finely I have tested the sound test for each speaker and sub to, from the receiver and from the creative software the sub seems to work but very quietly even if I cran the volume up on the sub or in the software , the sub dont work as it should.
1 thing I remarqued is that the sub works occasionaly in some movies. When listening to the music it not working and I dont understand that.

After Update on Mountain Lion my Bluetooth is not working

Hello,
after I updated my iMac from Snow Leopard nach Mountain Lion 10.8.2 my Bluetooth is not working. Also my Magic Mouse works not correct. The scroll function is not available. What can I do?

Leibe AndreSch...I have encountered the same problem with Mountain Lion 10.8.2
Especially after 'sleep' mode the bluetooth keyboard and mouse are lost and although I keep an old wired mouse
handy for such problems....I can't access the Bluetooth settings to sort things.....the spinning ball nonstop.
What I do is...Force shutdown by holding power button for two seconds...When shutdown PULL power cord out from rear of iMac....wait 5 seconds.. replace and switch iMac on again.
As long as bluetooths ar 'discoverable' it restores connection.
We will both look forward to another Apple iMac software update to sort this glitch....or I HOPE so

ATV2: Optical Out not working / No TV

I have an extra Apple TV 2 that I wanted to hook to a stereo receiver I have - it is an older receiver w/ optical inputs, but no HDMI. There is no TV around - I just want to use airplay and/or the remote app to select songs from my library to play through the optical connection to the receiver.
I hooked up the optical out directly to the stereo system and configured it all to work, but the ATV will not send any audio out.
I did more testing by hooking the ATV up to my main system, which has a TV. If I connected only the optical cable I could never get any sound. If I also connected the HDMI then once I switched to the HDMI input I would get sound from both the HDMI and optical outputs (I had both configured to go to different inputs on the receiver so I could check). Once I had selected the HDMI input once, the optical would work as long as the ATV was on. Once I set the ATV to sleep, then woke it up, the optical would no longer work until I would select the HDMI input source on the receiver - then audio would work again over both channels.
Is this expected behavior? It almost looks as though the ATV is purposely not outputting data until it has confirmed an HDMI connection on the other side - meaning it would be impossible for me to get this to work with just the optical connection. However, I have read other posts here making it sound like it should work just fine. Any ideas? I really don't want to have to get a new receiver just to connect HDMI.
If it matter the receiver I have is a HK AVR140. It should support whatever encoding format is coming from the TV. I've tried tweaking the Dolby Digital configuration and the 16-bit one too - I haven't seen much else to configure on the ATV.
I have checked to ensure I have the latest software release as well.
Thanks for any input.

ElChangoPelon wrote:
I have an extra Apple TV 2 that I wanted to hook to a stereo receiver I have - it is an older receiver w/ optical inputs, but no HDMI. There is no TV around - I just want to use airplay and/or the remote app to select songs from my library to play through the optical connection to the receiver.
I hooked up the optical out directly to the stereo system and configured it all to work, but the ATV will not send any audio out.
I did more testing by hooking the ATV up to my main system, which has a TV. If I connected only the optical cable I could never get any sound. If I also connected the HDMI then once I switched to the HDMI input I would get sound from both the HDMI and optical outputs (I had both configured to go to different inputs on the receiver so I could check). Once I had selected the HDMI input once, the optical would work as long as the ATV was on. Once I set the ATV to sleep, then woke it up, the optical would no longer work until I would select the HDMI input source on the receiver - then audio would work again over both channels.
Is this expected behavior? It almost looks as though the ATV is purposely not outputting data until it has confirmed an HDMI connection on the other side - meaning it would be impossible for me to get this to work with just the optical connection. However, I have read other posts here making it sound like it should work just fine. Any ideas? I really don't want to have to get a new receiver just to connect HDMI.
If it matter the receiver I have is a HK AVR140. It should support whatever encoding format is coming from the TV. I've tried tweaking the Dolby Digital configuration and the 16-bit one too - I haven't seen much else to configure on the ATV.
I have checked to ensure I have the latest software release as well.
Thanks for any input.
The "latest software release" is the problem. What you tried to do would have worked any time over the last year since the ATV2's release, prior to the three bug-ridden 4.4 "updates" of last month, which broke this feature for everyone who bought the ATV2 to use as an AirPlay bridge to their stereo system. That would seem to be a lot of people, as it's been a frequent topic of discussion, with new threads popping up daily for weeks by people who've just discovered the bug. I suggest you register your dissatisfaction with this issue at:
http://www.apple.com/feedback/appletv.html

After updating to 6.0.1 3G does not work

Just updated to 6.0.1 on my iphone4s and my partners iphone4 and both phones not do not work on 3G can only search the Internet using wifi, come on apple I'm paying £40 a month on my contract and now I can't use 3G ! Did you not test this update before releasing it ????????

Same here..........
I updated both my iPad3 and iPhone 4S to iOS 6 the day it was released. The iPad is actually working flawless. The iPhone is another story. It had trouble connecting to wifi, but everything else was fine.
Now with this iOS 6.0.1 update....... Forget it!!! I feel like I'm back with android by having all these equipment problems. Now the iPhone "WON'T" connect to any wifi at all, no matter what the settings are. "PLUS" now it has trouble using the regular 3G data service also. I can barely access anything on the Internet. The iTunes Store is another one that it won't connect to, no matter wifi or 3G. I have 36 apps that say they need to be updated and I can't access the iTunes Store to do it at all. I can't even access the store to download a new app either! Even the Netgear N600 router that my girl has, I can't connect to with the iPhone. Even though it had no trouble with iOS 6. The router is also updated to the current firmware version.
I'm afraid to update the iPad 3 to iOS 6.0.1 because of all the issues I'm having with my iPhone 4S.....
I feel like I'm back with android with all the equipment trouble that I've had with this iPhone.
I've never had any trouble before with apple products. It just seems like lately, there's been nothing but trouble with them.....

Optical out not working

When I plug an optical cable (with the right 3,5mm optical plug) into the headphone jack of my iMac, it is not recognized as an optica digital output. In the system preferences, the sound output changes from "internal speakers" to "headphones".
On my MacMini however, the sound output will change from "internal speaker" to "optical digital out"
I wondered if my iMac really has an optical digital out, and the system profiler is positive on this. Could the optical out be faulty?
Deatils on the iMac: 2.4 GHz Core 2 Duo with OSX 10.7.2, 4GB RAM, 24" mid-2007

Sound Out:
1
Headphone:
1
Details:
Single shared "headphone/optical digital audio output".
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

TS1559 halooo sir/madam,I am using iphone4s,after update ios 7 my device wifi is not working wifi button also not enable pls give me the solution

i am using iphone 4s,after update ios7 the wifi is not working and wifi button also not eneble its dimmed pls give me the solution.

http://support.apple.com/kb/ts1559

In Macpro mid 2010 system, after updating 10.7.5 bluetooth mouse does not work

After System updating bluetooth mouse is not working ,please give the suggetion.

My suggestion is please post in the correct forum, this is a forum for iMac's. The Mac Pro forum is listed at:
https://discussions.apple.com/community/desktop_computers/mac_pro

Optical out not working, or is it the reciever...

I just received a Belkin PureAV 6ft. Optical Cable with Mini Toslink Adapter today, in fact I opened it about 1 hour ago. My Denon AVR-65 doesn't seem to receive the optical signal from my Mac Mini at all. It at least won't lock on to the signal's frequency. I have tried changing the signal frequency, restarting the A/V receiver numerous times, and had no luck finding a manual for the system. I'm desperate to et my 5.1 working! Help!

There are probably more reasons at the Denon end why it might not work;
Does your Denon receiver have assignable inputs? You may have to get in to the receive's menu, and tell it to recognize the cable at the input you have it connected to.
In addition, make sure the mini's output is set to the optical/digital jack in system prefs; you may also have to get in to audio/midi settings to get it working.

After updating to mavricks my app store do not work.. what to do?

after upgrading to mavericks none of my application do not work and also app store what to do?

reset all settings
settings-general-reset-reset all settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
if issue persists back up and restore as new via iTunes
Peace, Clyde

After update to version 4.4 optical out not working

Similar Messages

Maybe you are looking for