After Update USB Devices wont work anymore

Hello,
after my first Arch installation on my ASUS UX31 I had 2 problems after makeing updates:
1. My USB Devices wont work anymore, but I belive they are still recognized because they are displayes via "lsusb -t":
2-1.1:1.0: No such file or directory
2-1.2:1.0: No such file or directory
2-1.4:1.0: No such file or directory
1-1.5:1.0: No such file or directory
1-1.5:1.1: No such file or directory
1-1.7:1.0: No such file or directory
1-1.8:1.0: No such file or directory
1-1.8:1.1: No such file or directory
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
|__ Port 1: Dev 6, If 0, Class=hub, Driver=hub/4p, 480M
|__ Port 1: Dev 7, If 0, Class=HID, Driver=, 1.5M
|__ Port 2: Dev 8, If 0, Class=HID, Driver=, 1.5M
|__ Port 4: Dev 9, If 0, Class=vend., Driver=, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/2p, 480M
|__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/8p, 480M
|__ Port 5: Dev 3, If 0, Class='bInterfaceClass 0x0e not yet handled', Driver=, 480M
|__ Port 5: Dev 3, If 1, Class='bInterfaceClass 0x0e not yet handled', Driver=, 480M
|__ Port 7: Dev 4, If 0, Class=vend., Driver=, 480M
|__ Port 8: Dev 5, If 0, Class='bInterfaceClass 0xe0 not yet handled', Driver=, 12M
|__ Port 8: Dev 5, If 1, Class='bInterfaceClass 0xe0 not yet handled', Driver=, 12M
I need these Devices because they are my only network access via the Asix USB to Ethernet Adapter.
After the installation I have compiled and used the drives for the Asis adapter.
The both other devices are my USB Keyboard and Mouse.
2. My other problem is, that after the update my resulution of my console is very weak, this is just bad but not a real problem, I can live with that.
Thanks in advance for helping me

on plugin
May 4 21:07:06 localhost kernel: [ 49.202535] usb 2-1.2: new high speed USB device number 10 using ehci_hcd
May 4 21:07:06 localhost kernel: [ 49.287984] hub 2-1.2:1.0: USB hub found
May 4 21:07:06 localhost kernel: [ 49.288333] hub 2-1.2:1.0: 4 ports detected
May 4 21:07:06 localhost kernel: [ 49.555951] usb 2-1.2.1: new low speed USB device number 11 using ehci_hcd
May 4 21:07:07 localhost kernel: [ 49.712506] usb 2-1.2.2: new low speed USB device number 12 using ehci_hcd
May 4 21:07:07 localhost kernel: [ 49.865853] usb 2-1.2.4: new high speed USB device number 13 using ehci_hcd
unplug:
May 4 21:06:57 localhost kernel: [ 40.059117] usb 2-1.2: USB disconnect, device number 3
May 4 21:06:57 localhost kernel: [ 40.059128] usb 2-1.2.1: USB disconnect, device number 7
May 4 21:06:57 localhost kernel: [ 40.059269] usb 2-1.2.2: USB disconnect, device number 8
May 4 21:06:57 localhost kernel: [ 40.059342] usb 2-1.2.4: USB disconnect, device number 9
I rebooted several times of course and it was no kernel update.

Similar Messages

After updating itunes ti wont work anymore

hey, i hav had my ipod scince the end of july and hav never had any problems with that or itunes until recently. After updating itunes a message came up when i tried to use it after the instalation saying files are missing and to reinstall itunes, which i have done repeatedly which have not worked, i hav tried many various strategies to rectify the problem with no prevail, could someone please help me with this as i dont know a lot about computers as i am only 15.
Thankyou

Delete the file "C:\Documents and Settings\All Users\Application Data\Apple Computer\iTunes\SC Info\Sc Info.sidb"
If you don't know how to get there, then go to Start, then Search, and search for "Sc Info.sidb", then delete it from there.
After deleting that file, restart you computer and then try running iTunes again.

After update, USB is not working, can't do a hardware test. what now???

I did the software update.
After that my 1 and only USB port is not working anymore.
Totaly dead.
Cant do any hardware test, since they ask to use a dvd. Well no USB so no Disk Drive So no hardware test.
Also the online test is not working.
Need to download a file. which is failing to.
Dont know what to do.
Please help

I'd try a SMC reset first.
http://support.apple.com/kb/HT3964
and a PRAM reset second.
http://support.apple.com/kb/ht1379

Software update 6500, device not working anymore!!...

Hello,
Brought the mobile (6500 slide) yesterday and today its with local dealer for repair.. whats wrong with Nokia software update application!!!!!!
following error pop up during the application launch,
Error #1
nsl_host_process.exe - Application Error
The instruction at "0x00e17510" referenced memory at "0x0001c004". The memory could not be "written".
Click on OK to terminate the program
Click on CANCEL to debug the program
OK Cancel
Error #2
NOKIA service layer host process has encountered a problem and need to close..
application restarted many time and error repeats, once it didn't pop up and error and i started to update the mobile..
during the update windows pop up with found new hardware and there you go,.. previous errors are back and the mobile doesn't respond anymore,...
Operating system Windows XP, and matching all the configuration requirements according to Nokia,
anyone had a remedy for this??? does anyone ever did firmware upgrade nokia 6500 using software update application??
thanks
Deskey

Its solved. i guess it was all related to Windows Problem or anti virus Problem.
XP re installed and the software works just fine..however the mobile is already with the local dealer for update the firmware. will do it again once it back on my hand!!!.
thanks for your sympathy though!
Desky.

Unable to tether my iPad to my iPhone after updating both devices to ISO 7.1 both devices worked prior to the update

unable to tether my iPad to my iPhone after updating both devices to ISO 7.1 both devices worked prior to the update

For dial up connections axmung other things. I have not been successful with the Bluetooth (pairng )

HT6114 after the update some programms didnt work anymore....

i dont know if there is a connection, but after the update, some programms didnt work anymore.
for example: „Hands Off!“ & „Adobe Indesign CS6“
anybody else?

Hands off have an update available for 10.9.2, Hand Off 2.1.2 dated 25th Feb 2014.
Check Adobe site for updates.

Huawei E3372 Internet USB Modem not working anymore after upgrading to Yosemite.

Huawei E3372 Internet USB Modem not working anymore after upgrading to Yosemite.

Thanks for your information.
It will help many users that have huawei E3372 with same problem.

My voiceover wont work anymore it has a yellow triangle on it now

my voiceover wont work anymore it has a yellow triangle on it now can anyone help me

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem.
It is also completely possible that the impact has caused physical damage.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Dual-Boot; Restart and boot other o/s USB devices not working

I have issue with my msi z97-g43 mobo and Windows dual o/s PC.
Booting with win-8.1, USB devices working very well.Restaring windows 8.1 have NOT any issue.
After shutdown & start PC, choosing to boot windows 7 on bootmanager, USB devices not working in Win-7.
System no hang or occur any error/BSOD message.All startup programs run as normal.
I tried to re-plug usb devices but notting happens... Still not working
But after the win-8.1 shutdown, if i switch off PSU power button, watting ~1 munute for discharge.
After power up PC and boot with windows 7 all usb devices works normaly.
I checked all internal connections. 2 times disassembly all hardware and re-built system, nothing changed.All windows updates and latest drivers installed.
I'm sure other H/W is OK, but I thnik this mobo have a fault.

Thank you for reply.My PC system specs:
CPU:    Intel Pentium G3258 3.2ghz
Board:    MSI Z97-G43 /Bios: Ver. V17.7
MEM:    G.Skill Ripjaws 2x4gb DDR3-1600mhz cl9 1.5v F3-12800CL9-4GBRL
VGA:    Sapphire AMD Redeon HD6670
CASE:    Zalman z3 plus white (5x 120mm fan)
PSU:    Thermaltake Litepower 500w (12v1+12v2=36amp)
HDD-1:    Seagate 1TB ST1000DM003 /HDD-2: Seagate 2TB ST2000DM001
COOLER:    Akasa 92mm PWM Blue Led
OC:    CPU:Default /MEM: X.M.P mode=1600mhz 9-9-9-24-2t 1.5v
O/S:    Win7 x64 PRO + Win8.1 x64 PRO (Genuine)
All hdd's have MBR based partition table.Windows 7 & 8.1 installed in non-efi mode.In BIOS Boot sequence is setting up to non-efi Boot(system) drive as primary.
Before I suspect maybe have a short circuit to pcb or similar thing cause this issue.I take out all parts outside the chassis, and ran this system on the antistatic bag and box.Nothing has been changed.
I have Cooler Master Devastator(MB24 + MS2k) USB keyb+mouse set and tplink wn722n usb wireless dongle.
I have one more pc,based on AMD 970+SB950 chipset mainboard and AMD CPU.I exchange all parts to this amd mainbaord and tested for faulted hardware.All intel system H/W's is ok.All works great
Dual boot works perfectly.Not needs to switch off psu/power back and run system again.
I think msi z97-g43 mainbıoard have a problem.

Itunes wont work anymore...error 7

My itunes wont work anymore on my latop, i uninstalled it and reinstalled it but when i try to get in to my itunes and error 7 message will pop up saying that it was installed incorrectly and ive installed it several times to find the same thing happening. I dont know what to do anymore so if someone could help me out i would really appreciate it a lot!!!

I got an upgrade iTunes request from Apple. And upgraded. I should never have done that. Now it says that "iTunes is not properly installed". Other strange messages are also coming up, like missing .dll files etc.
I have deleted all Apple programs. Used Revo Uninstall that also deletes registry files and left over files. I have used ByeiTunes and Registry mechanic. I have used everything that is suggested on this site:
http://www.howtogeek.com/howto/23959/completely-remove-itunes-and-other-apple-so ftware-from-a-windows-computer/
After doing all this, I got the same error message. So what wrong with Apple? When you have bought the product, you are left out in the dark. I have given up. Synchronizing the calendar with Outlook I can do manually, pictures that I have downloaded to my phone, I can access directly, and pictures taken by the phone I have to send to myself through e-mail. Music I never download using iTunes.
I have had enough. After this and after Apple has changed the plug that leaves me with 8 useless chargers and stands, there will be Samsung next time. I'm running Windows 7, 64 bits.
Hans (Professor of Marketingy). I wonder if Apple is reading this?

I bought an iphone4s before my carrier put my sim in it i updated itunes now wont work with my sim

I bought an iphone4s before my carrier put my sim in it i updated itunes now wont work with my sim

Hello Aaron1658,
It sounds like you are unable to activate your phone with the SIM provided to you by your carrier. Try these steps in the following article to help you troubleshoot what it happening, named:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/ts3424
Symptoms
Your iPhone may display one of the following messages when you attempt to activate it:
"Your iPhone could not be activated because the activation server is temporarily unavailable."
"The SIM card inserted in this iPhone does not appear to be supported"
"The iPhone is not recognized and cannot be activated for service."
"iTunes was unable to verify your device."
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
If this is not what you are referring to, would you provide some more information about what is happening? Any error messages, prompts, etc.?
Thank you for using Apple Support Communities.
All the very best,
Sterling

MACBOOK USB device not working in WIndows XP

My MACBOOK USB devices is working fine in leopard OS(10.5.1) but in windows XP professional the USB Devices is not working after I did dual boot.Please help how would I fix the problem.
Thanks
Mike

Please try the above procedure first as mentioned by SilentFlyer. If that does not work then highlight My Computer and Right Click on mouse. On the menu that pops up Choose Properties. Click on the Hardware tab and then Device Manager. Scroll all the way down to Universal Serial Bus Controllers. Click on the little plus sign to the left to open the sub-components. Does any one of them have a yellow exclamaation mark? That indicates that something is not functional. Please let us know what you see there.
Axel F.

MACBOOK USB Devices not working in Windows XP

My MACBOOK USB devices is working fine in leopard OS(10.5.1) but in windows XP professional the USB Devices is not working after I did dual boot.Please help how would I fix the problem.
Thanks
Mike

This forum is for troubleshooting the usage of OS X, not Boot Camp for Windows.
You'll want to repost your question in the Boot Camp discussions:
http://discussions.apple.com/category.jspa?categoryID=237

IPhone 4 after iOS 5 bluetooth doesnt work anymore?

iPhone 4 after iOS 5 bluetooth doesnt work anymore?
I cannot connet my car via bluetooth anymore?
Anyone can help?

It certainly does work for myself and millions of others.
Has the basic troubleshooting of reset, restart, and restore been tried?
What about Settings > General > Bluetooth > select device > Forget this device?

Re: The FN button wont work anymore

Hi all,
I have a problem with my L500-128 Satellite.
After upgrading Windows Vista(64bit) to Windows 7 home(64bit) my FN button wont work anymore.
I installed the Toshiba Value Added Package and Flash Cards supports utility and it still doesnt work.
Hope to hear from someone soon^^.
Jeremy

Try with Start > All programs > Toshiba > Utilities > Restart Flash Cards.

After Update USB Devices wont work anymore

Similar Messages

Maybe you are looking for