After update Windows 10 will not boot up

Hello every one, il be glad if someone can help me here
I had the latest build of windows 10 downloaded and the PC restarted to install it, i left it at that, when i got back i had a black screen with nothing on it, for a few hours so i restarted the PC, when it come back up the BIOS pop out, there is only a
boot sitting for "Windows Boot Manager (PO: ST9750422AS)" and "Disabled", i tryed to restart the system a few times but it dose not seem to help
Any one have any idea? if nothing come up i guess il try to format if possible and reinstall windows, but if i can avoid that and get also the few files that are not backed up yet back il be glad to cut off that hassle
Thanks guys waiting for your response
Since you have the media to reinstall Windows, that will be your best bet.
Win 10 TP is still a beta. There can be numerous possibilities that resulted in the "black screen" situation. You could be running around like the proverbial " chicken without a head " trying to solve the problem.
Save the headache, reinstall and start from scratch. Unfortunately you will be losing the files you have not backed up.
Another suggestion :
If you can wait and if you have computer #2......
It is quite possible that a new build is forthcoming soon.
Use your computer #2 to download the new build ISO file, burn it to a bootable DVD or USB > use it to install the new build into computer #1.

Similar Messages

Windows will not boot

Hi,
I got after couple of years perfect comp. an terrible problem. The Windows will not boot, i can start it only with CD or sometimes i am getting message: how I wish to start Windows . I already tried to repair it, but no success. In the event log I could see only one notice : Service Control Manager event 7026, but this I had before with perfect comp.
Thanks in advance

Hi guys.
here i foud the cure:
* Power off the PC
* Power off the monitor
* Disconnect all cables from the monitor (USB, power, etc.)
* Disconnect all monitor cables from the PC (USB, VGA, DVI, etc.)
* While disconnected, press and hold the monitor power button down for 3 seconds
* Reconnect the power cord to the monitor
* Reconnect the monitor VGA or DVI cable to the PC video card
* Power on the monitor if it does not power on by itself
* Power on the PC
* Once into windows, open the Device Manager (Press the Windows key and the Pause-Break key)
* Click the Hardware tab
* Click the Device Manager button
* Click the plus by Universal Serial Bus Controllers (notate what is listed)
* Connect the USB Uplink cable from the bottom of the monitor to a USB port on the rear of the PC
* Under Universal Serial Bus Controllers, you should see additional Generic USB Hubs
* This means the monitors USB Hubs were seen by the operating system
Message Edited by DELL-ChrisM on 12-07-2007 02:47 PM

Windows will not boot GTX 770

Hi there,
I recently bought new MSI gtx 770 lighting edition LE. When i choose in uefi as a primary gpu - PCIe, windows will not boot, and after few seconds screen goes black. If i go with primary gpu as integrated in processor i am ok to boot even i can play on monitor connected to GTX770. When i ran passmark benchmark, i get for VGA 3600 points, againt average 6300. Is there something wrong ? Thank you. Motherboard Asus sabertooth z77, cpu i53470k. PSU 600W, 8GB ram...

Silly questions as this should be a no-brainer, but have you installed specific drivers for the 770 from the geforce website?

Window will not boot on the usb cd rom what should be done

window will not boot on the usb cd rom what should be done

Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Could not access Creative Cloud today without updating it. After update it will not open. It spins for five seconds then closes. Mac Pro tower 3 yrs old 12 gb ram os 10.7.2

Could not access Creative Cloud today without updating it. After update it will not open. It spins for five seconds then closes. Mac Pro tower 3 yrs old 12 gb ram os 10.7.2

I was unable to access the laptop last night to create a new user; however my client would perfer not to try a second account since that would make it unusable for him while we test the second profile.
Also John Sophos was installed after this started to verify that it was not a virus/malware (I know pointless step but it has happened to me before) so I don't think that is the problem

After updates, mail will not open from dock

After updates, Mail will not open from dock, or from the application app in finder.

What happens when you try - anything?

Installed todays security update, computer will not boot, down

I installed todays security update. now my G3 600mhz 14" iBook, running 10.3.9, will not boot.
I have had several symptoms throughout the day. A couple of times it sat there for about an hour with a blank screen. It came up several times with the message to type "mac-boot" ( I may be remembering the syntax wrong) I tried that, I also tried typing "shut-down" at that point.
Later it came up to my background screen bout would do nothing and go no further. Now it is siting there with a OS 9 folder icon in the middle of the screen and sometimes the icon alternates between a face and a question mark in the middle of the icon.

Robert,
I sympathize with your plight. I had a similar problem with my G4 AGP (Sawtooth). Like a dummy, I installed Security Update 2006-004. Upon reading posts about Apple updates on this board, it seem that the knlowledgeable ones wait until the unsuspecting ones walk on the landmines that Apple builds into the upgrades before trying it themselves.
I had exactly the same problems that you describe. Since I believe that my G4 has an extended warrantee, I called Apple Phone Support. The gentleman after listining to my plight, told me that he could not help me because my Mac was a "VINTAGE" model, no longer supported by Apple. How is that for an answer. I guess that now that Apple switched to Intel, all Motorola chips become "persona non-grata".
Anyway, I remember that something like this happened to me some years back with another "upgrade". I believe that basically, the problem is due to the fact that Apple does not make provisions for third party products installed in a Mac. Last time, it was the video card (ATI) that had to be removed in order for the upgrade to work. This time, I had to remove my 2 GHz. Giga Design CPU and put back the measly 400 MHz. Apple CPU. Then I was able to boot normally. I then re-installed the Giga drivers and everything went back to normal. Since I am getting old, and it is recommended for persons of my age to engage in mental exercises, I believe Apple is trying to help me by having my brain work overtime (not to mention the 5 terror-filled hours I spent to resolve the problem.
I suspect the update writes to or resets your PRAM or other non-volatile memory. Does your G3 iBook have any non-Apple components? If so, I suggest you remove it or them. Beyond that, I cannot help you, except to suggest that you reset the PRAM.
I now have transferred most of my data to a fast, trouble-free (relatively) PC. Since in the future, all Macs with have Intel chips, there will be no reason for me, after about 30+ "vintage" years to buy Apple. Of course, just as Apple touts that its OS can run on a PC, PC owners will (are already) running Mac OS on their PC.
Nick

BIOS update, then will not boot from any drive

This old laptop, 3000 C200 8922 was acting very clunky when on wireless.
Downloaded Bios Version 63ET62WW and flashed it into the bios.
Now, even though I can get to the bios screen, and it shows the hard drive, DVD/CD drive, it will NOT boot from either.
It will also "see" a usb installed, but will not boot from it.
I have removed all power and cleared the CMOS several times and I still have nothing. Tried two different hdd's which have been in the machine and same results.
HELP!! I should have never messed with it......

hi k4pew,
One rule after a BIOS update is to Load optimize deafults after updating.
Try that go inside BIOS Hit F9 to load defaults then F10 to Save and Exit.
If not
Try turning on the computer and start hitting F1 to load the Recovery Menu and see if that will push then Try Reseting the PC.
If still the same Im afraid that the BIOS needs to be reflashed.
Im not aware of any flash tool or a your Previous BIOS Version Firmware available for download.
You can try calling Lenovo Technical Support for any options available for repair.
Im sorry to hear what happened
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Phone crashed after update and will not turn on

I updated my Droid Razr Maxx yesterday and the phone completely crashed and would never start back up after the update. The pgone keeps displaying the Motorola "M" but will not go past that. I have tried to do the soft reset by using the voulume up and power key and the phone will balcck off but when it comes back on it continues to only display the Motorola "M" symbol. I also let the phone completely die to see if that would fix the problem but that did not work either. What could be the cause of this problem? Is there a way to fix this problem?
>> Subject edited for brevity <<
Message was edited by: Verizon Moderator

Let's get your phone back up and running, Keishab! I appreciate all that you've done thus far. Are you able to get your device to power up in the Boot Mode Selection Menu. I've provided the instructions here, http://vz.to/1xyvikX . You do not need to complete the factory reset but I do want to see if it will power up into this menu option.
YosefT_VZW
Follow us on Twitter @VZWSupport

Windows will not boot. Recovery media not working. Satellite L675D-S7052

I am using a Satellite L675D-S7052 with Windows 7. When the laptop is powered on, it will only run to the Windows loading screen (windows logo on screen) and will stop. The logo remains animated but it will not load any further.
I attempted to reset to factory settings using the recovery partition. It will run through "Windows is loading files" to completion, but it will then go to a blank screen with only the mouse cursor showing.
Finally, I attempted to recover from recovery DVD's I made previously. It loaded through the same screens as the recovery partition, halting again on the blank screen with the mouse cursor.
I backed up all important files on an external hard drive already. I was able to successfully boot an Ubuntu 12.04.2 live disk and it ran correctly. I can access the files on the hard drive for back-up from Ubuntu. I have not altered anything.
That's as far as I can go on attempting to fix this. If anyone can help me find my next step, please advise.

Hi! Sense you're not getting any replies, I will offer my opinion. Sense you can boot Ubuntu OS and it runs correctly,what else could be the problem but bad software?? You tried the recovery partition and the recovery DVD's and they reacted the same?? It's good that you can recover your important files. The recovery options are great, but a back up image on a external USB is your best protection. I just don't understand why people don't create a back up image of their OS. It's so simple!! When did you create your recovery DVD's?? Sense both recovery options act the same, I suspect corruption. That's the only thing that makes sense to me??
Dokie!
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Bootcamp - Changed partition settings now Windows will not boot

Hi,
I suspect I've created a problem that I've made progressively owrse in trying to solve... Any help appreciated!
A month ago I created a bootcamp partition (about 850Gig OS X and 150Gig for Win7), successfully installed Windows 7 and everything was fine.
After an acciental delete of itunes media incident I thought I would create a Time Machine backup partition on the OS X part of the drive so used the Disk Utility to do so, making sure I "took" from OS X and not the Bootcamp partition. I now had three partitions: OS X (500Gig), a Backup (350Gig) and a Bootcamp (150Gig) (I now suspect some of you might be screaming I've created the problem here already...) noting that the 150Gig Bootcamp partition is still as it was and the diagram in Disk Utility has always shown it as the bottom section.
Perhaps I'm being naive here but it never occured to me that splitting the OS X partition would have any impact at all on the Bootcamp partition!
Anyway, now I'm unable to boot to Windows (black screen "No bootable device" etc message).
Checking Finder, all the files on the Bootcamp partition still seem to be there - User settings/accounts, Program Files, the lot.
Is there anyway I can easily rectify this? (eg put the Windows 7 disk in and repair the install or something?!)
I tried deleting the extra Backup partition I created without luck (the space just gets greyed out and unallocated)
Help! I really don't want to have to go through the whole mess of reinstalling Windows 7 on to the Bootcamp partition (that to my mind still hasn't been touched!)

Your Boot Camp partition number probably changed, Windows does not like more than 4 partitions, you had 3 + Lion Recovery and one that Windows makes, and that is one too many.
You can try running Windows startup repair from the disk, but>
Before you do anything make a backup (a clone, for speedier disaster recovery)
If startup repair fails then reinstalling Windows is called for, so while you are at it I would repartition the drive completely, put your Lion installation back on the Mac from your clone, make a new prtition in Boot Camp and reinstall Windows. Then if you have backups of the Windows side (Windows Backup or similar) restore the data.

Power failure during application update, computer will not boot now

Help. I was in the middle of loading a system update when I shut the power off. Now my MacBook Pro does not boot and only has an error message when I power up. I have read some forum topics on downloading a stand alone installer to fix and another on using my leopard install disk\utilities to "restore from time machine".
Has anyone lived through this kind of problem. Any advise would be appreciated.

brocko wrote:
Welcome to Apple Discussions:
Help. I was in the middle of loading a system update when I shut the power off.
You mean you forced the computer off with the power button?
When you say the middle of loading a system update, what do you mean? Downloading it, installing it??
Now my MacBook Pro does not boot and only has an error message when I power up. I have read some forum topics on downloading a stand alone installer to fix and another on using my leopard install disk\utilities to "restore from time machine".
You need to boot into the Leopard DVD by inserting the DVD, rebooting and holding down the "C" key. After the language screen, in the menu, top left, under Utilities, run disk utility and repair HD and permissions.
That's the first step.
If that does not work, boot into the safe mode by holding down the shift key on boot. If you get to the login screen, you are probably in good shape - just click restart and let the system reboot normally.

After updating firefox will not launch

Ever since version 8 became available whenever I update FF it will not launch. No error messages or anything, just no response at all from the button. I have cleared the cache and cookies, completely removed FF using the control panel - add remove programs, deleted the FF folder from C: program files and then emptied the trash. then downloaded a fresh copy of FF from www.mozilla.org. Again no response at all when attempting to launch. not even an error report. I am running Microsoft XP Pro 5.1.200 SP 3 Build 2600 on a Dell OptiPlex 745 processor x86 family 6 model 15 stepping 2 intel ~1794 mhz

What about the latest version of Firefox, Firefox 9? Does that work?
If it doesn't, the instructions here might be of help: [[Firefox will not start]]

HT3986 after installing windows via bootcamp and windows will not boot

trying to boot up the windows half all i see if a blinking folder with a question mark and after several reboots it may/may not work
the installation seem fine nothing happened i got no errors so i am wondering what is happening.

you don't have enough details for us /. you don't have a good install / did you login and setup the account once? / does it have enough free space / was the DVD burned from an ISO?
There are lots of things but not from your remarks.
What version Windows / what Mac year model and whether Boot Camp Assistant drivers were installed / how large a partition / read the guide
www.apple.com/support/bootcamp has it all

Changed partition settings now Windows will not boot

Hi,
I suspect I've created a problem that I've made progressively worse in trying to solve it... Any help much appreciated!
A month ago I created a bootcamp partition (about 850Gig OS X and 150Gig for Win7), successfully installed Windows 7 and everything was fine.
After an acciental delete of itunes media incident I thought I would create a Time Machine backup partition on the OS X part of the drive so used the Disk Utility to do so, making sure I "took" from OS X and not the Bootcamp partition. I now had three partitions: OS X (500Gig), a Backup (350Gig) and a Bootcamp (150Gig) (I now suspect some of you might be screaming I've created the problem here already...) noting that the 150Gig Bootcamp partition is still as it was and the diagram in Disk Utility has always shown it as the bottom section.
Perhaps I'm being naive here but it never occured to me that splitting the OS X partition would have any impact at all on the Bootcamp partition!
Anyway, now I'm unable to boot to Windows (black screen "No bootable device" etc message).
Checking Finder, all the files on the Bootcamp partition still seem to be there - User settings/accounts, Program Files, the lot.
Is there anyway I can easily rectify this? (eg put the Windows 7 disk in and repair the install or something?!)
I tried deleting the extra Backup partition I created without luck (the space just gets greyed out and unallocated)
Help! I really don't want to have to go through the whole mess of reinstalling Windows 7 on to the Bootcamp partition (that to my mind still hasn't been touched!) and have to download the dozens of gigs required to reinstall the software currently present.

It has and can be done but backup to the same drive is rather pointless, shadow copies and file revisioning... external and separate. I thought with Lion and notebooks that there already is a temporary hidden backup folder, hidden, check iwth Lion Comm. already.
Boot from Windows DVD and do some BCD magic to get it back.
You changed the partition ID number.
I wish we could be more flexible:
OS X
Windows
Data
so that Windows wasn't relegated to the inner slower platter tracks for one.
you can get it repaired.
Also, there are programs and even Windows 7 will create a system recovery CD and image... something you should be doing already so you never face loss or if a worm/mal/trojan/virus should cause havoc.
https://discussions.apple.com/thread/3293948

Windows will not boot to my boot camp partition on a DIY fusion drive - gives "No bootable device found" error

I have a MacBookPro 9,1 (mid-2012, non-retina) running OS X 10.8.2. Here is what I have done to my system:
Installed Windows 7 x64 Pro to a boot camp partition; installed all windows updates.
Using WinClone, save an image of this boot camp partition.
Removed optical drive and HDD.
Installed HDD in place of optical drive.
Installed SSD in place of HDD.
Booted to recovery partition, installed OS X on a flash drive.
Booted to flash drive, created fusion drive using [MacWorld's instructions](http://www.macworld.com/article/2014011/how-to-make-your-own-fusion-drive.html)
Booted to recovery partition on flash drive.
Restored system to fusion drive from a Time Machine backup. Unfortunately, it seems that because I never installed OS X on my fusion drive, I do not have a recovery partition. But that's an issue for another day.
Using Boot Camp assistant, created a boot camp partition on my HDD.
Using WinClone, restore my Windows installation from the previously created image.
Now, Windows boots to a black screen telling me that it can't find a bootable device. I have tried a few things to resolve this, all without effect:
I know that VMware Fusion has to prepare a boot camp partition in order to virtualize it, so I figured it might inadvertently fix things. Alas, while it *did* successfully boot my boot camp partition into a virtual machine, I still can't boot into Windows.
I figured I'd just try to reinstall Windows. Surprisingly, my system booted to my Windows install disc, which was in my original optical drive (which I had put in a USB case). But, Windows refused to install, giving me a an error 0x8030024. It seems the solution to this issue is to disconnect all drives but the one on which you want to install Windows, which is something I would dearly like to avoid. It would be a pain, but more than that, I'm afraid it would bork my fusion drive, even if I'm careful to never boot to OS X with the SSD disconnected.
A lot of places said that this error results from a borked MBR, and suggest using a tool like gptfdisk to rewrite it. I followed the instructions [here](https://discussions.apple.com/thread/4144252?start=0&tstart=0), but *that* didn't work either.
I am now completely at a loss as to how to proceed, and Google isn't much help either.
In conclusion, here is some information that you may find helpful:
    $ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *240.1 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:          Apple_CoreStorage                         239.7 GB   disk0s2
   3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *750.2 GB   disk1
   1:                        EFI                         209.7 MB   disk1s1
   2:          Apple_CoreStorage                         648.4 GB   disk1s2
   3:                 Apple_Boot Boot OS X               650.0 MB   disk1s3
   4:       Microsoft Basic Data BOOTCAMP                100.9 GB   disk1s4
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Mayfly                 *884.0 GB   disk2
$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 63DC419F-1A09-4C5B-977A-F59F79502CA1
   =========================================================
   Name:         FusionDrive
   Size:         888087773184 B (888.1 GB)
   Free Space:   0 B (0 B)
   |
   +-< Physical Volume B1B14251-2DB3-491C-9E7A-5C2FD11881BA
   |   ----------------------------------------------------
   |   Index:    0
   |   Disk:     disk0s2
   |   Status:   Online
   |   Size:     239713435648 B (239.7 GB)
   |
   +-< Physical Volume D0BA2837-514D-4620-8E1D-26D18137CA94
   |   ----------------------------------------------------
   |   Index:    1
   |   Disk:     disk1s2
   |   Status:   Online
   |   Size:     648374337536 B (648.4 GB)
   |
   +-> Logical Volume Family 736A8900-FE9C-4342-A932-EDC35444774C
       Encryption Status:       Unlocked
       Encryption Type:         None
       Conversion Status:       NoConversion
       Conversion Direction:    -none-
       Has Encrypted Extents:   No
       Fully Secure:            No
       Passphrase Required:     No
       |
       +-> Logical Volume B4997853-59F8-4480-BB48-3481B2F2A123
           Disk:               disk2
           Status:             Online
           Size (Total):       884000030720 B (884.0 GB)
           Size (Converted):   -none-
           Revertible:         No
           LV Name:            Mayfly
           Volume Name:        Mayfly
           Content Hint:       Apple_HFS
$ sudo gpt -r -vv show disk1
Password:
gpt show: disk1: mediasize=750156374016; sectorsize=512; blocks=1465149168
gpt show: disk1: Suspicious MBR at sector 0
gpt show: disk1: Pri GPT at sector 1
gpt show: disk1: Sec GPT at sector 1465149167
      start        size index contents
          0           1         MBR
          1           1         Pri GPT header
          2          32         Pri GPT table
         34           6
         40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 1266356128      2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1266765768     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1268035304         280
1268035584   197111808      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1465147392        1743
1465149135          32         Sec GPT table
1465149167           1         Sec GPT header
$ sudo fdisk /dev/disk1
Disk: /dev/disk1     geometry: 91201/255/63 [1465149168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE    0   0   2 - 1023 254 63 [         1 - 1268035583]     *2: 07 1023 254 63 - 1023 254 63 [1268035584 - 197111808] HPFS/QNX/AUX
3: 00    0   0   0 -    0   0   0 [         0 -          0] unused
4: 00    0   0   0 -    0   0   0 [         0 -          0] unused

My setup is very similar to your's, Ryan, on a Mac Mini5,2 and the ordering is different and Winclone was not used.
1. New Mini with internal 500GB with Mountain Lion(ML), put into an external FW enclosure, so the Mini can/could be booted using an external drive for contigency.
2. Replaced internal stock HDD (500Gb/5400rpm) with SSD/HDD (256Gb SSD/1TB 5400rpm).
3. Installed W7 x64 on 64GB partition on HDD, which was a single-partition drive to begin with.
4. The remaining HDD partition and the entire SSD was put into a Fusion drive.
5. Using Command-R, new ML installed on Fusion HD.
Here is what I currently have...(Disk0 - SSD, Disk1- 1TB HDD, Disk2 - Fusion, Disk3 - External FW).
diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *256.1 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:          Apple_CoreStorage                         255.7 GB   disk0s2
   3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk1
   1:                        EFI                         209.7 MB   disk1s1
   2:          Apple_CoreStorage                         934.5 GB   disk1s2
   3:                 Apple_Boot Boot OS X               650.0 MB   disk1s3
   4:       Microsoft Basic Data BOOTCAMP                64.9 GB    disk1s4
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Fusion HD              *1.2 TB     disk2
/dev/disk3
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk3
   1:                        EFI                         209.7 MB   disk3s1
   2:                  Apple_HFS Rescue HD               371.8 GB   disk3s2
   3:                  Apple_HFS Leopard HD              31.9 GB    disk3s3
   4:                  Apple_HFS Snow Leopard HD         31.9 GB    disk3s4
   5:                  Apple_HFS Lion HD                 31.3 GB    disk3s5
   6:                 Apple_Boot Lion Recovery HD        650.0 MB   disk3s6
   7:                  Apple_HFS Mountain Lion HD        31.3 GB    disk3s7
   8:                 Apple_Boot Mountain Lion Recove... 650.0 MB   disk3s8
diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group A8C00490-0E14-401F-AB69-59F37724E8C4
    =========================================================
    Name:         Fusion
    Size:         1190201270272 B (1.2 TB)
    Free Space:   0 B (0 B)
    |
    +-< Physical Volume 4772013B-5520-4801-9BE5-BCAEF4AEDAB3
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     255716540416 B (255.7 GB)
    |
    +-< Physical Volume A679A101-3C78-4A59-B5EE-A4339210CFAD
    |   ----------------------------------------------------
    |   Index:    1
    |   Disk:     disk1s2
    |   Status:   Online
    |   Size:     934484729856 B (934.5 GB)
    |
    +-> Logical Volume Family 5EF5C7CA-0B9C-4169-82A1-41C84F206672
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume 1512657C-ED13-4B31-82C6-7AECBBCA7F98
            Disk:               disk2
            Status:             Online
            Size (Total):       1185508581376 B (1.2 TB)
            Size (Converted):   -none-
            Revertible:         No
            LV Name:            Fusion HD
            Volume Name:        Fusion HD
            Content Hint:       Apple_HFS
sudo gpt -r -vv show disk1
gpt show: disk1: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: disk1: Suspicious MBR at sector 0
gpt show: disk1: Pri GPT at sector 1
gpt show: disk1: Sec GPT at sector 1953525167
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1825165488      2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1825575128     1269544      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1826844672   126679040      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1953523712        1423
1953525135          32         Sec GPT table
1953525167           1         Sec GPT header

After update Windows 10 will not boot up

Similar Messages

Maybe you are looking for