After update, XFCE doesn't show the "Applications Menu" on right-click

I can set it to get a submenu called "Applications," but I can't actually get the Applications menu to exclusively appear on a right-click like I used to. How do I change this back?

That's the only way works as i know...
Perhaps you should tell xfce team what you think,i don't like this new feature as well

Similar Messages

After update, Apple TV just shows the Apple Logo, but won't start. up.

I updated my Apple TV 2 today with the new update, it downloaded everything and then installed it. Now it is showing the startup screen (the silver Apple logo) but won't go past that. I tried unplugging it, I tried holding the plat and menu button together to reset it, it still just pops up with the logo and never starts up. I don't know what to do. Any suggestions?

Grab a micro usb cable and restore through iTunes

The NJ Lottery website doesn't show the winning numbers when I click on the game

I made a few changes to stop pop ups but I don't remember exactly what I did. Ever since then when I open the NJ Lottery website the information in the center panel isn't there and when I click on a game the winning numbers and the prize amount doesn't open.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Wiki doesn't show the top menu if Vector theme is choosed

Hi, if i choose other wiki theme than the default one, i don't get the top menu (Home, Packages, Forums, ...), so it gets more complicated to navigate through arch website. i usually have two tabs in my browser: one for the wiki, and one for the rest.
is anyone else getting this behaviour? i think the right think is to always have the menu, regardless of the choosen theme.

itsbrad212 wrote: (...) I see no reason to use a different theme (unless of course you want to)
well, i have to completely agree with that
BTW, i really don't get why, if you put the content in a different frame, is there the need to make one menu for each theme. is the menu also themeable? i don't think so though..
just to be sure, did you get what i meant when i proposed to load content in a different frame? (it will behave like a completely different page, and the menu will always be there).. this is all about separating the content from the menu.. similar to this (this is a single iframe design, for simplicity):
<html onload="javascript:highligh_the_right_content();">
<script>
if (document.location.href == "http://www.archlinux.org") {
frames['content'].location.href='http://www.archlinux.org/home_content.html';
hightlight('home');
else if (document.location.href == "http://www.archlinux.org/packages") {
frames['content'].location.href='http://www.archlinux.org/packages/packages_content.html';
highlight('packages');
</script>
<div id="menu">
<a id="home" onclick="javascript:frames['content'].location.href='http://www.archlinux.org/home_content.html'; highlight('home'); ">Home</a>
<a id="packages" onclick="javascript:frames['content'].location.href='http://www.archlinux.org/packages/packages_content.html'; highlight('packages'); ">Packages</a>
// etc
</div>
<iframe name="content"></iframe>
//etc
the same for all sections. this way 2 separate files are needed for each section:
*index file
*content file
Last edited by canolucas (2010-08-21 14:30:59)

Why can´t I bookmark with Ctrl+D, via the Bookmark-menu or right-click?

Version 3.6

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''

After Effects CC doesn't show the Comp Screen

Hey Guys,
Since a few days, I have a really bad problem with AE CC. Everytime I'll open AE and start a new composition, everything's working fine. But the preview of my comp is not shown...
Neither a reinstallation of AE nor a reinstallation of my graphics driver solve my problem.
Please help me!
I'm sorry for my bad english ://

You need to reset your workspace. Find it here:

My iphone 5 cant switch on after updating it. it only shows the logo on and then goes off and so

My phone can not switch on

Your data is already lost. You must restore your phone in order to be able to use it. This is why Apple offers you two ways to back up, including iCloud, which backs up automatically over wireless every night if you're plugged in to power and the screen is locked. How much easier could it be? Yet you say you haven't backed up in months. If your phone was lost or stolen, or you dropped it in a puddle, you would be in the same boat. PEOPLE: BACK UP YOUR STUFF!!!!
Signed, The Back Up Nag

When I click an email link it opens a new tab but it doesn't show the website, I have to click "ALLOW" first. How do I set it to show automatically??

This started happening after a recent update, I'm running FF 16. It's very annoying when I check 10 emails at a time. Can I get it back to the way it used to be, opening websites from email links automatically. I don't need the added security as I have WOT and KIS installed.

That fixed it, thank you!

HT1386 how do I sync manually, with new update it doesn't show option?

How do I sync manually, with new update it doesn't show the option?

For iTunes>Help>iTunes Help>Sync you device>Setup syncing
Sync your device manually
If you use manual syncing, you can sync items from more than one iTunes library to your iPod. (You can sync iPod touch, iPhone, and iPad with only one iTunes library.)
You can manually sync music, movies, TV shows, podcasts, and iTunes U lessons. You can’t manually sync photos and info (contacts, calendars, bookmarks, and so on).
Connect your iPod, iPhone, or iPad to your computer and select your device.
Click the Summary button and select “Manually manage music and videos” (below Options).
Click the On This Device button.
Click Add To on the right side of the iTunes window.
Drag items from the left side of the iTunes window to the pane on the right. To add other types of content, choose a category from the Library pop-up menu.
Click Done.
If you use automatic syncing, you can also add items to your device by dragging. To drag items to an automatically synced device, follow the instructions above, but skip step 2.
The picture from the iTunes Help do not display.

My APPS application shows an update is available yet it doesn't show the APP. What's going on?

My APPS application shows I have updates available yet when I view it, it doesn't show the APP. I have to download it from iTunes to my Phone. What is going on?

If you have two apple IDs then try logging in with the other ID. Apps are locked to the ID that was used to download then in the first place

HT5621 I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully und

I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

BPM console doesn't shows the deployed application in BPM console

Hi Friends,
i developed a BPM process in Jdeveloper and deployed in the weblogic server. Enterprise manager shows that application but in BPM workspace doesn't shows that application to initiate the process form BPM console. any one can you please let me know why the weblogic server shows this peculiar behavior?
Thanks
Hari Mandadapu

Did you create an initiator task with corresponding Task Flow within the BPM Project?
Only when you add an initiator task it will show up in the BPM Workspace.
An initiator task differs from a regular human workflow task.
Otherwise you can only start the process from Enterprise Manager or Webservice Call. Check out if the process show up in Enterprise Manager.
Regards,
Martien

I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions.

I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions. HELP PLEASE!

yeah i plugged in my iphone to my computer and itunes does not even notice that i plugged it in.

HT4623 I have an iPod with iOS 4.2.1 and would like to up date version 5. The pc I normally sync with has XP operating system. So I can't up date to iTunes 10. And my iPod doesn't show the software update button shown in the article. What can I do?

I have an iPod with iOS 4.2.1 and would like to up date to version 5. The pc I normally sync with has XP operating system. So I can't up date to iTunes 10. And my iPod doesn't show the software update button shown in the article. What can I do?

You cannot update it if you can't get the latest version of iTunes. Actually, the latest version of iTunes will run in XP if you have Service Pack 2. Also, you posted in the iPad forum, and your profile shows you have an iPad, but in your post, you say it is an iPod. Is it an iPad or an iPod?

How can I get photo of callers to vshow full page since I just did the update it doesn't show but a thumbnail pic

How can I get photo of callers to vshow full page since I just did the update it doesn't show but a thumbnail pic

That is the design in iOS 7.1 and there isn't any way to change it. You can provide feedback to Apple if you want: http://www.apple.com/feedback/

After update, XFCE doesn't show the "Applications Menu" on right-click

Similar Messages

Maybe you are looking for