After Updateing Firmware defult password is What?

Sir
i have router RV215W and i was update my router firmware to 1.1.0.5 . After finishing updation my router was restart than after i found wifi name is "ciscosb1" but old password is not work . So please tell me the defulted password after updateing firmware .

Hi Udayaraj,
Even if you do a firmware upgrade the password wont get changed until and unless if you do a device factory reset.
once try cisco/cisco or admin/admin.
Thanks,
Phanikrishna

Similar Messages

  • After updating office365's password, can't login outlook, always let you input password again and again

    Dear all,
           This is a real issue in working. User uses win7 and Outlook2007.
    The issue is that after updating office365's password, users can't login outlook, always let you input password again and again. Sometimes, we can fix the issue by deleting current outlook profile then create a new one. But sometimes the method can't work.
    What is the root reason?
    Many thanks,
    Franklin hong

    Hi Franklin,
    Firstly, please make sure you can access the mailbox with the new Password in OWA. Then check your Account settings in Outlook 2007:
    Click Tools > Account Settings. In the E-mail tab, double click the Exchange account. Click More Settings > Security > Select Negotiate Authentication > OK.
    Please try to clean up the cached credential in your computer. Then fill in with the format of UPN when it prompted for credentials next time and check the Remember my credential to save it. About how to remove cached credentials, please follow these steps:
    1. Launch the Credential Manager from Control Panel > All Control Panel Items > Credential Manager.
    2. In the Generic Credentials section you’ll see a setting for [MS Outlook] which will include your SSO details. Click the downward-pointing arrow to the right of that value.
    3. In the expand details, click Remove from vault. Then Outlook will no longer have a stored copy of your password.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Apple TV doesn´t work at all after updating firmware!

    After updating firmware Apple TV 3 the only thing that works is the little lamp on the front...it´s steadily blinks. It doesn´t response to remote control, and don´t show up threaded via USB in Itunes for resetting.
    Model: Apple TV 3
    Itunes: 12.0.1.26
    What to do?

    The update didn't apply correctly. You need to restore via iTunes.
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    Make sure you follow the steps correctly (unplug all cables, connect micro usb, then reconnect power)
    Connect directly to a computer, not a keyboard port or USB hub. Try a different cable

  • Kernel panics after updating firmware

    Kernel panics began at startup after updating firmware about 2 weeks ago. Went through the KP repair routines prescribed by thexlab.com. Found no problems with the hard drive, permissions, etc. Did erase and install (with Leopard OS dvd bought from best buy) after archiving files to external HD and was able to startup normally. Updated OS to 10.5.7, along with several other items (iTunes was one of them). Put previously copied files (mostly iTunes). The computer ran successfully for a few days and then started getting KP's at startup again. Did another erase and install. Had success. Loaded iLife and Office 08 to have something to try to test the machine with. Shut down the computer and restarted successfully. I had forgotten I had not tested the RAM so downloaded Memtest. Tried to run it but the computer froze half way through the test. Did a hard shutdown, then tried to restart normally and got the KP again at startup. Here is the panic log:
    Sun Jul 5 18:24:05 2009
    panic(cpu 1 caller 0x001A7BED): Kernel trap at 0x00b10612, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x000000b8, CR3: 0x0134c000, CR4: 0x00000660
    EAX: 0x43ec9630, EBX: 0x049cf804, ECX: 0x04e15800, EDX: 0x00000000
    CR2: 0x000000b8, EBP: 0x43ec9668, ESI: 0x00000000, EDI: 0xffffffff
    EFL: 0x00010246, EIP: 0x00b10612, CS: 0x00000008, DS: 0x04e10010
    Error code: 0x00000000
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x43ec9408 : 0x12b0e1 (0x4555b4 0x43ec943c 0x133238 0x0)
    0x43ec9458 : 0x1a7bed (0x45e568 0xb10612 0xe 0x45dd24)
    0x43ec9538 : 0x19e517 (0x43ec9550 0x1 0x43ec9668 0xb10612)
    0x43ec9548 : 0xb10612 (0xe 0x48 0x10 0xb40010)
    0x43ec9668 : 0xb1753d (0xc1d00005 0x1000000 0x1000003 0x40)
    0x43ec96c8 : 0xb0bfc0 (0x43ec9858 0x43ec9808 0x0 0xafe41c)
    0x43ec9828 : 0xb00132 (0x0 0x600d600d 0x7027 0x43ec9858)
    0x43ec98e8 : 0xca58de (0xc1d00005 0x1000000 0x1000003 0x40)
    0x43ec9918 : 0xcae273 (0x2436f000 0x1000000 0x88100090 0x3e)
    0x43ecb8a8 : 0xc92d8a (0x2436f000 0x1000000 0x15 0x2436f01c)
    0x43ecb9a8 : 0xafa472 (0x2436f000 0x0 0x43ecbab2 0x80)
    0x43ecba08 : 0xaf15a5 (0x48af000 0x0 0x43ecbab2 0x80)
    0x43ecbb38 : 0xaf2d74 (0x48af000 0xaf6358 0x43ecbbec 0x4)
    0x43ecbc08 : 0xade139 (0x48af000 0x1 0x0 0x13)
    0x43ecbc68 : 0xad7940 (0x48af000 0x2407 0x43ecbd2c 0x48af000)
    0x43ecbc98 : 0x40c515 (0x48af000 0x4a40130 0x4a40130 0x0)
    Backtrace continues...
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.NVDAResman(5.1.6)@0xaf9000->0xd25fff
    dependency: com.apple.iokit.IONDRVSupport(1.5)@0xaeb000
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
    com.apple.iokit.IONDRVSupport(1.5)@0xaeb000->0xaf8fff
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
    com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000->0xaeafff
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    9A581
    Kernel version:
    Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
    System model name: MacBookPro3,1 (Mac-F42388C8)
    Was able to start up in safe mode and ran memtest again, this time having success and finding no RAM problems from the single run of Memtest. Shut down and restarted successfully.
    Turned the computer off for the night and just restarted it successfully about 24 hours later, and it is still running.
    I presently have about 130GB of free space on my HD. I don't have any peripherals attached. The computer gets fairly warm at times but certainly not excessively.
    Can anyone decipher my KP log and see if there is a fixable problem?
    thanks in advance,
    Pat Leopard

    Had another kernel panic at startup this morning. I had the Leopard DVD in and was contemplating another erase and install, but tried to back out of it. On restart the KP happened. Here is the log:
    Wed Jul 8 10:44:41 2009
    panic(cpu 0 caller 0x001A7BED): Kernel trap at 0x00b10612, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x000000b8, CR3: 0x0134c000, CR4: 0x00000660
    EAX: 0x2ebb1630, EBX: 0x04e20404, ECX: 0x04de7000, EDX: 0x00000000
    CR2: 0x000000b8, EBP: 0x2ebb1668, ESI: 0x00000000, EDI: 0xffffffff
    EFL: 0x00010246, EIP: 0x00b10612, CS: 0x00000008, DS: 0x04de0010
    Error code: 0x00000000
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x2ebb1408 : 0x12b0e1 (0x4555b4 0x2ebb143c 0x133238 0x0)
    0x2ebb1458 : 0x1a7bed (0x45e568 0xb10612 0xe 0x45dd24)
    0x2ebb1538 : 0x19e517 (0x2ebb1550 0x1 0x2ebb1668 0xb10612)
    0x2ebb1548 : 0xb10612 (0xe 0x48 0x10 0xb40010)
    0x2ebb1668 : 0xb1753d (0xc1d00001 0x1000000 0x1000003 0x40)
    0x2ebb16c8 : 0xb0bfc0 (0x2ebb1858 0x2ebb1808 0x0 0xafe41c)
    0x2ebb1828 : 0xb00132 (0x0 0x600d600d 0x7027 0x2ebb1858)
    0x2ebb18e8 : 0xca58de (0xc1d00001 0x1000000 0x1000003 0x40)
    0x2ebb1918 : 0xcae273 (0x2435f000 0x1000000 0x88100090 0x3e)
    0x2ebb38a8 : 0xc92d8a (0x2435f000 0x1000000 0x15 0x2435f01c)
    0x2ebb39a8 : 0xafa472 (0x2435f000 0x0 0x2ebb3ab2 0x80)
    0x2ebb3a08 : 0xaf15a5 (0x4837800 0x0 0x2ebb3ab2 0x80)
    0x2ebb3b38 : 0xaf2d74 (0x4837800 0xaf6358 0x2ebb3bec 0x4)
    0x2ebb3c08 : 0xade139 (0x4837800 0x1 0x0 0x13)
    0x2ebb3c68 : 0xad7940 (0x4837800 0x2407 0x2ebb3d2c 0x4837800)
    0x2ebb3c98 : 0x40c515 (0x4837800 0x4a0bc40 0x4a0bc40 0x0)
    Backtrace continues...
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.NVDAResman(5.1.6)@0xaf9000->0xd25fff
    dependency: com.apple.iokit.IONDRVSupport(1.5)@0xaeb000
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
    com.apple.iokit.IONDRVSupport(1.5)@0xaeb000->0xaf8fff
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
    com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000->0xaeafff
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    9A581
    Kernel version:
    Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
    System model name: MacBookPro3,1 (Mac-F42388C8)
    I left the computer alone for a while and when I hit the power button it came right up.
    I'm going to pull RAM modules per your suggestion.
    thanks,
    Pat Leopard

  • My iphone 5s lose Touch-id after update ios 7.1 . What should i do now ? My Iphone is from HongKong but now i lives in Viet Nam . Is there anyway that I can transfer my Iphone to Apple Hongkong

    Pls help me
    My iphone 5s lose Touch-id after update ios 7.1 . What should i do now ? My Iphone is from HongKong but now i lives in Viet Nam . Is there anyway that I can transfer my Iphone to Apple Hongkong

    In iOS 7.1, the setting has changed locations and is in the same grouping with General, Wallpapers, etc. Also, if you have not set a passcode, you cannot see or set Touch ID. If you restored the phone as new and it still does not provide you the option to set a passcode, and then Touch ID, then it is possible there is a hardware error. Since you purchased the device in Hong Kong, as described before, you can only get a friend/relative to take it to Apple, or you will have to do it yourself. Unfortunately that is what can happen when you need warranty work and have purchased a device outside of the country that you live in.

  • Compass application can't running well after update firmware to 20120726

    my windpad7 can't run compass application well after update firmware to Android_2.3.1_MSI_02_20120726 but it can pointing well if i turn it upside down (face down). i use the same application that running well on earlier firmware and I've try using another typical application and the result is the same,.. anyone experienced it? 

    on my n73 i can go to app manager and reinstall them.
    if u wanna remove it, then reinstall them and uninstall.
    Blackberry Bold

  • HT3228 How do I reestablish hotmail delivery to my iPhone and iPad after I have been locked out?  I have reestablished service to my PC, but cannot get email on other devices, even after updating to new passwords.

    How do I reestablish hotmail delivery to my iPhone and iPad after I have been locked out?  I have reestablished service to my PC, but cannot get email on other devices, even after updating to new passwords.

    Sometimes it is fruitless to try to "fix" a broken account on an iOS device. I would delete the account on both devices and then configure the account again from scratch.

  • Sony A7 failed to turn on after updating firmware 2.00

    As i mentioned, my Sony A7 failed to turn on after updating firmware 2.00. It just appear a blank screen after click the finished button on the updating app on Mac. I waited for more than an hour and there is still no thing happened.

    I bought the Sony A7II a few days ago.  It initially charged just fine, but today I tried to charge it using the cable with an electrical outlet as well as the USB to computer.  Neither one would get the charge light to illuminate.  Not feeling the love Sony.  I just purchased a Flash, wrist belt, filters, etc...  I'm definitely not happy.  It seems this is a problem!

  • Some buttons without tones after updating firmware...

    Hi.
    After updated firmware to version 20.0.080 (5530 Xpress Music), some tones and vibrates at dialing pad (just numbers) and at Contacts (main screen) don't work any more.
    All other functions work normaly just as described, but some tones and vibrating functions doest'n seem to react. I have set touch screen tones on level 2, also the vibrate on level 2. Tryed to reinstal the latest firmware again, done succesfuly, but no changes.
    Should I try to restore the phone by *#7370# ??? 
    Is anybody facing the same issue ???
    br,

    Hey,
    I have the same problem with my phone. After the update, installing v.20.0.080 the dial tone from the keypad just dissapeared. These morons at Nokia instead of adding letters to the keypad dialer with the new firmware, they went further and removed the dial tone.  Such a progressive step..

  • How can I configure Snow ABS after updating firmware to 5.7?

    I have a 3 Mac network (G5 w/Tiger,vers A iMac and Wallstreet PB w/ Panther) connected by Snow ABS extreme that's been running perfectly for a couple of years. I updated the firmware on the ABS to 5.7 in efforts to have a configuration my Treo 650 with Enfora WiFi adaptor could join (it's 802.11b only and Enfora suggested updating the firmware and selecting b/g option). After the firmware update, Airport Admin Utility doesn't see the ABS unless I connect it to the G5 running AAU by ethernet (don't know if it's a crossover but I read on the forum it now doesn't matter). Trouble is when I then give my password, try to configure I get "The Airport Admin Utility was unable to read the configuration on the selected base station...an error occured while reading the configuation". I've tried updating the FW again, soft and hard resets, made sure I have the latest AirPort (4.2.1)and nothing helps. I pulled out my original snow ABS (not extreme) and my DSL and whole network function like before. I like the extreme since I can use my Airport Express to print for everybody and it then completes my coverage much better. Any help would be greatly appreciated.
    LittleJohn
    G5   Mac OS X (10.4.6)   iMac vers A, Wallstreet PB (both 10,3,9)

    There is no reason to be running beta software, I doubt it will even still run as iOS 6 has been officially released.  Or were you simply trying to be funny? 
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • C7 restarting after update firmware 013.016

    Yesterday I seen that new firmware is out and I start updating from my operator network,everything was OK finish update and then start the problems with my C7.My phone restarted a couple of times from yesterday,last time I was in middle of call when C7 shutdown and start again alone.what happen I suppose that new firmware is for solving bugs not to make them My phone work "OK" until I update firmware,there was some bugs with widgets but nothing serious like this.Its very unprofessional when your phone is resetting in middle of some important conversation.Any solution Nokia?Has someone else have same problem?
    sorry if there are some mistakes in english its not my language but I think that you understand problem

    I don't have nokia care center in my town ,I must send phone over the mail express,because of that, I first called them but only what they can told me is to send phone and they will update software.
    So they think, that's the software problem,I didn't send phone yet,  I wanted to try to reinstall software over PC suite, but that was problem too. PC suite doesn't recognize operators version of software.from nokia ovi suite the latest software is 012.004 ( my previous ) and don't let me to reinstall because I have newer on the phone.
    "Slint" I see that you have same problem ,I noticed one more thing my battery drain to fast (much faster then with previous firmware) also after upgrading software, do you have same experience maybe?
    I am working now 16 hours without restarting if you think that's the temperature problem I will warm up a little this machine now , to see what happen
    I didn't expect these problems ,I am very disappointed, its big many for phone and you expect everything fine.
    The phone is great I loved him but these bugs kill my love for him.
    I have also N86 and he works perfectly ,I wanted a touch screen and now I have a problem.
    I don't understand how can be software problem if update pass well.and if there is differences between update from operator or by PC , why nokia gave option to update by operator?
    I think that the problem is stupid firmware , phone work well until the update of firmware.conlusion by me is that I hope for new firmware soon to resolve these problems.i also make complain to my operator, will see what to do next .

  • A3000 receiving call after update firmware

    this is what happened to me after i update to firmware A3000_A422_003_014_130909_WW_CALL_FUSE
    any solutions?
    i want to update to firmware A3000_A422_008_019_131107_WW_CALL_FUSE but i'm afraid that i cant make a call with my device.

    How we can update firmware step by step, can you explain please?

  • After updating my screen blinks. What's up with that ? And how do I fix?

    After updating my new operating system my screen blinks constantly. What's up with that? And how do I fix? Thx

    Which OS? Provide details so people can help.

  • Looking through pictures make iphoto take pauses every 3 or 4 picture,this started after update fro 4 of april.What is wrong??

    Hi..
    I have been using Iphoto and Aperture a few years.Both programs has been improoved several times during last years,but after update on 4 of april 2013 something changes in surch a negative way that fustration comes too surface too often. When I am out photographing,I will have too look through my pictures.When you have f.instance 200 pictures to view and program take pauses all the time,you get fed-up and dont get the job done.I hope Apple can improove program soon,My camera is a Nikon D800...Tom

    Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS.  So to get help you need to give as much information as you can. Basic things like :
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.
    btw A space between the full stop and the next sentence makes it easier to read.

  • Macbook pro was preinstalled with 9.2.1and after update iPhoto won't open-what to do

    macbook pro was preinstalled with 9.2.1 and after update won't open-get message that says 9.2.1 isn't supported by OS X

    Update to 9.5.1 from the AppStore.
    Sign ino the AppStore with your AppleID and check, if there is iPhoto on your Purchased tab to be accepted to your AppleID. If yes, accept it. Then check the "Updates" tab of the App Store.
    If you cannot update this way, download an update from the Software update section of the Apple Support page. You need to update at least to version iPhoto 9.4.3.
    What MacOS version did you upgrade from? Did your Mac come with system installation media, or did you install and update from the AppStore?

Maybe you are looking for