After Updates It Died

MacG4 10.3.9 with iTunes 6.0.4
When I upgrated my iPod It Died, went blank (white)
Could'nt reset or reboot.
How I solved it.
You know the old saying,
" if you want to get something done? Do it yourself"
I reset it to drive mode, performing the same action you would use to reset.
I toggled on and off, held the menu & select buttons for 15-25 secs.
Then I did the same with the select button &
pause button 15-25 secs.
I didn't see any apple.
The blank white screen came back at the first stage and then select button & pause button 15-25 secs.
And iPod "like magic" appeared on my destop
showing showing the drive & folders.
I opened iTunes and there was again with
no damage.
Who knew.

MacG4 10.3.9 with iTunes 6.0.4
When I upgrated my iPod It Died, went blank (white)
Could'nt reset or reboot.
How I solved it.
You know the old saying,
" if you want to get something done? Do it yourself"
I reset it to drive mode, performing the same action you would use to reset.
I toggled on and off, held the menu & select buttons for 15-25 secs.
Then I did the same with the select button &
pause button 15-25 secs.
I didn't see any apple.
The blank white screen came back at the first stage and then select button & pause button 15-25 secs.
And iPod "like magic" appeared on my destop
showing showing the drive & folders.
I opened iTunes and there was again with
no damage.
Who knew.

Similar Messages

  • HT5244 Is there any way to find out after(!) running die Update, if i have been infected?

    Is there any way to find out after(!) running die Update, if i have been infected?

    Run any one of these tools: http://reviews.cnet.com/8301-13727_7-57413811-263/flashback-malware-removal-tool -roundup/
    Or you can check manually: http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/

  • Apple tv completely died after update

    apple tv completely died after update, not even light on. its brand new.

    Take it back and get another.

  • My ipad will not power on after update. I have tried connecting to computer which doesn't recognize it. I have pushed top and circle buttons at same time. It had a battery charge before it died.  I tried to stop the upload and am afraid it 'crashed'

    My first genteration ipad will not power on after update. I have tried connecting to the authorized computer which won't recognize it - does not acknowledge a device is plugged in. I have pushed top and circle buttons at same time. It had a battery charge before it died.  I tried to stop the upload midway and am afraid it 'crashed'

    Try putting it into recovery mode.
    Connect iPad to your computer via USB while it's turned on.
    Open iTunes
    Hold the iPad's Sleep/Wake switch (power button on the top of the iPad) down until the "power off" slider appears.
    Power off the iPad completely (wait for the progress spinner to disappear).
    Hold the Sleep/Wake switch AND the Home button down for a full 10 seconds.
    After 10 seconds (the second time you'll see the Apple logo on the screen) release the Sleep/Wake switch while still holding the Home button.
    Continue to hold the Home button for another 10 seconds until the USB connection image appears on the iPad's screen, then release the Home button.
    A pop-up message will appear on iTunes saying it has detected an iPad in recovery mode, you must restore...
    Click on the "Restore" button and the process will begin.

  • My iphone4 died after updated ios 5.01.

    My iphone4 died after updated ios 5.01. Yesterday, when I charged my iphone, iturn showed new software update. I clicked "update".After finished update,my iphone show the apple log only. I couldn't turn on and turn off my iphone. The iturn can't recognize my iphone.Who can help me to solve the problem. Thanks!

    The iphone is designed to be synced to your computer or cloud service regularly.  Your contacts will be in whatever program/service you have chosen to sync.
    If you have failed to sync your contacts then they are likely gone.
    You can try restoring from backup.
    You should be transferring any purchases made on the iphone to your computer regularly.  Just sync them back.  if you have failed to do this, then redownload them:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • ATV died after updating

    I have a brand new ATV, was setting itt up to my TV and network and iMac, and everything worked fine.
    Then I selected update, and it took a looong time but finished in the end after more than 30mins (I have a download speed on my network around 40MB/s).
    But after updating the ATV box just died, the LED is completely off.
    Yhen I tried reboot with power cycling, and after there came a screen picture wich I interpreted as I need to connecting with the USB cable - and I am not able to do anything with thw remote or anything. I do not have this micro-USB cable - any suggestions anyone?

    Sadly, you need to get the micro-usb cable to get the Apple TV to work again. It happened to my Apple TV 3, and I had to run down to Radio Shack to buy one. It was about $13 for the shortest one they had, but it ended up working and restoring the unit once you plug it in to your computer. That's better than going out and purchasing a new Apple TV for $99.

  • SmartWatch 2 died after update with Sony Update Service

    After problems with Call Handling app after update of my xperia z ultra to Kitkat 4.4.4. I was told by support to repair my firmware using PC Companion. It didn't help. Afterwards I was instructed to update my SW2 firmware with Sony Update Service (SUS).
    I downloaded SUS and installed on my PC and followed the instructions. It said that the SW2 already has latest version. I clicked continue and after 40% it failed saying that there was an error with connection click retry or contact support. I tried several times - all attempts failed.
    After I tried turning on my SW2 but it was dead. And any other steps didn't help to turn it on.
    Nearest Service center is in Moscow, I live in Astana, Kazakhstan. So I am not even sure if they can help us even if I spend my time and money to take it there.
    So the bottom line is - never use SUS to update your watches, folks.

    ello everybody
    The problem is solved by Sony
    You will find an update for smartwatch 2
    This update will solve our problem
    Have fun

  • My apple tv died after update

    Black screen and white light flash slow on appletv??

    Similar problem: Said yes to an update; after update only Computers and Settings logo on screen, updated again via traditional iTunes method and got everything back except for Settings. Anytime I select a specific settings menu such as "General" screen goes black.  Can only get back to main menu by pressing menu key on remote twice.   Lesson learned: only allow an update if there's a major upgrade offered by Apple.  They just don't test these updates thoroughly enough before releasing. 

  • IPhone 5s no longer holds battery charge after updating to 8.1.1

    Immediately after updating to iOS 8.1.1, my iPhone 5s battery will no longer hold a charge. At 7:30 am (EST) it was 100% - by 10:30 am I had to plug it back in as it was down to 8%!!   From 100% to 8% in 3 hours ...
    I NEVER had a problem with my phone in any way before updating the software.  PLEASE HELP!   Thank You. 

    The same thing happened to me. However, I was 7 hours from home in the Baaken. I was in a situation that requred I keep the phone on for saftey reasons. My Iphone 5s died and is now a brick!
    I just ordered my first Android phone. It's unfortunate that Apple post Steve Jobs doesn't perform adequate testing on software. They are becoming just "another" company!

  • After updating to iOS 8.3 I can now no longer back up my iPhone 6 to iCloud?

    It says I do not have enough storage space. But I do. It has been backing up perfectly fine until I updated to iOS 8.3 and now it says I need an extra 3.4 GB of storage space? I have all apps turned off for backing up except my photos. I only have 1.3 GB of photos. No other old backups or anything. I can't figure out what this other 3.4 GB of space is and why this just happened after updating to iOS 8.3. Any ideas or suggestions? Thanks!

    luco95 wrote:
    After I connected my iPhone 4s tu itunes a message showed up asking if I want to update to ios 8. I say yes and after downloading it another message showed up saying it ocurred an error with this symbol (-1) and then mi iPhone died and showed on the screen to connect it to itunes, when I connect it again itunes told me I had to restore it and when I put restore it began extracting the software of my iPhone and when it finished another message showed up telling me it ocurred another error and that they couldn't find the dispositive. I tried to make the same process again and it was the same. Hope someone could help me, I would really apreciate it.
    Error-1 generally indicates a hardware failure.  You'll need to bring your phone to Apple for evaluation.

  • I have a problem in my iphone 4 with wi-fi after update to IOS6 please can help my how can solve this problem?

    I have a problem in my iphone 4 with wi-fi after update to IOS6 please can help my how can solve this problem?

    Nope
    One needs to press the home and sleep / wake keys together for the phone to reset
    The other thing I could recommend
    Let the battery run out and the phone completely "die"
    It may take a day or two with it not being used
    Then plug it in to charge and see if there is any change in behavior
    If you cannot get this to work - you may need to bring it to an Apple store

  • Iphone 5 stopped working after updated to IOS 7.1

    I have just updated my iphone 5 to IOS 7.1 and unfortunately it stopped working. I can not turn it on. Anyone got the same problem? My phone is already out of warranty so I have no idea how much it would cost to fix my died phone

    My sons iPhone 5 did the same thing after updating to iOS 7.1.
    You may have to connect the device to a computer running iTunes and do a restore on the device. Restore as new. If you don't have a backup everything will be lost but you may get the device working again.
    http://support.apple.com/kb/ht1414

  • Help after updating the OS to 4.3.3 none of the 3rd party app work

    Help after updating the OS to 4.3.3 none of the 3rd party apps work at all they just flash up on the screen and then die.

    install a free app (or any other app) from the app store, then the problem will be fixed.

  • I receive my daughters sms after updating to the new software

    Hi all,
    after updating to the new software on my iphone, I suddenly receive and sends sms etc to my daughters mobile phone. How can that be stopped? Has is someting to do with using same appleid?
    Bo Christensen
    +45 40 16 66 55

    Diego_Onofre wrote:
    Hey ! Today I tried to make the update for my iPhone 4 and it died. I get the same type of message your getting and nothing will make it respond or set it back to the normal settings. Did you call apple? did you get a new phone? were you able to fix it? I'm really disappointed on apple and iphone.
    if you were to read the ops original post he said hes getting a new phone....

  • Only half of the body just below the camera and steel side of camera side is getting heated up just after 10 , 15 mins of usage i my iphone  4 is it normal...as earlier the body was not heating up even after 2 hours....the problem started after updating t

    only half of the body just below the camera and steel side of camera side is getting heated up just after 10 , 15 mins of usage i my iphone  4 is it normal...as earlier the body was not heating up even after 2 hours....the problem started after updating to 6.1.2
    iPhone 4, iOS 6.1.2

    Hi, did you ever solve this problem?
    My 1 year old -- ha! one month out of warranty -- iPhone 4 has been having a nearly identical problem over the past few days.
    It started by dying completely so I had the battery replaced, thinking it was simply battery issue.
    It then worked again for a moment but started doing exactly what you describe, going through a reset cycle (longer than 30 seconds but who's counting). And it felt quite warm.
    Did hard reset, plugged into wall charger and MBP USB but the new battery wouldn't even get a full charge (a whopping 92% after nearly two days). It would even lose battery when plugged in if I opened an app. And all the while plugged in, if I left the phone on, it would cycle through these resets. So I turned it off to try to charge it.
    Now suddenly, it's dead again. Totally black, and hard reset does nothing. Up until two days ago there was nothing wrong whatsoever with this phone! And I hadn't even installed a new app that could be the root of the issue. No idea whatsoever what caused this.
    Any help would be much appreciated!!

Maybe you are looking for

  • CME 4.0 to Voice Gateway

    I have a 2600XM running CME 4.0 and a 1760 with 2 FX0 and 1 FXS card. Both routers are running IOS 10.4(9)T. I would like the 1760 to act as a gateway using H.323. Can anyone advise me on how to set this up?

  • Problem in query after the upgrade to BI7.0

    The values which were zeros in the workbook in 3.x version is now showing as blank in the BI7.0. The query uses calculated key figures and structures to report the required figures. I tried looking at the properties of this key figure and everything

  • Using Flash Video Encoder Programmatically

    Is there a way to use the Flash encoder programmatically from Action Script or command line? I am looking at developing a batch process that compiles a list of files to be encoded into FLV for later consumption.

  • Artwork for albums

    is there any way to set the artwork for an album if itunes cannot find an album cover?

  • Random slides in appleTV screensaver

    Hello! if I use imported slides from iPhoto as screensaver with apple TV2, they are randomly displayed . Is there a way to make them appear in the original order of the album ? Jean-Claude Paris-France