After updates my Epson 845 won't print. it says printer in use
My epson workforce 845 printer stopped printing. When I go to print it says printer in use. I have uninstalled and reinstalled the drivers. I still have error. Any suggestions.
Try resetting the printing system OS X Mavericks: Reset the printing system
Similar Messages
-
After update my epson scanner software stopped working
After update my epson scanner software stopped working
In Image Capture, when scannig i have this bug
https://dl.dropboxusercontent.com/u/733136/scan%20bug.mov
Can someone please test this
Thanks
Pedro MolinarThe Billions colors options creates a Tiff file , the Millions creates a Jpeg.
the Tiff has worst quality and a bigger size -
After updating my iphone 5 to ios 8 it says I need to plug it into iTunes but when I plug it into iTunes I tunes says I must reset my phone. However, my phone won't turn on so I have no way of reseting it.
Hi tdunkan,
Welcome to the Apple Support Communities!
It sounds as though your iPhone may need to be restored after the update. The first article below will walk you through restoring in a manor very similar to what you are seeing on your iPhone display.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Once the iPhone has been restored and activated, you will have the choice to set up as new, restore from iTunes backup, or restore from iCloud backup. If you information is backed up on either iTunes or iCloud, the following article will discuss how to restore from those backups.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Have a great day,
Joe -
whenever I log in to mum's airport wifi either with my iphone or macbook pro (her aiport express uses wep security) after a few hours it won't work and says connection timed out. The wifi and airport also is invisible to mum's macbook which means she can't login. If I plug her computer or mine direct into her virgin modem - it does work... I can't even find her express in airport utility to reset it any ideas what is going wrong?
Hello Sally,
Welcome to the Apple Support Communities. There are a few things to try when dealing with a Self-Assigned IP address. The following articles will assist with troubleshooting Wi-Fi issues all around.
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Mac OS: How to release and renew a DHCP lease
http://support.apple.com/kb/ts1920
Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
http://support.apple.com/kb/TS1317
Regards,
-Norm G. -
The AirPrint from ipad2 to hp printer was working fine. All of a sudden the function no longer works! The ipad2 recognises the printer and even sends the print command. The printer centre say 'printing' but it remains syptuck in that position and no printing occurs. I've reset the wireless connections and deleted printing queues and reset the printter to original settings. The printer is found but nothing happens! Can anyone help out?
ccrobin I’m sorry your having this much trouble with this printer . Hopefully this step will fix your problem try a partial reset.
Ccrobin have you tried to connect a USB cord to the printer directly to the computer to see if it has the same issue?
{edited for non standard info} -
I am trying to update some apple apps I get a message saying I am using the Qatar store and must change stores. I don't know what to do. Please help
Open the App Store app, go to the Featured pane, swipe to the bottom, tap your Apple ID and sign out. Tap again and sign back in. The App Store will automatically change to the store from which your account is authorized to make purchases.
-
Unable to print to hp printer AirPrint after update to 7.0. 7.1
AirPrint Setup and Troubleshooting
http://www.apple.com/support/ipad/assistant/airprint/
How to print from your new iPad using AirPrint
http://www.imore.com/print-ipad-airprint
AirPrint Basics
http://support.apple.com/kb/ht4356
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Cheers, Tom -
After update to Lion FaceTime won't Work.
After my Update to Lion Facetime won't Work.
I can't log in and get an Server Error.
In the Systemlogs is an entry like:
FaceTime: [Warning] TRUST validation failed with result 5
FaceTime: [Warning] FTFaceTimeServerBag: URL bag data invalid (not valid)Same problem here..
Very frustrating..
On both Macbook Pro 2010, and Black Macbook...
Neither of which had any problems running Facetime 1.0.2 on Snow Leopard 10.6.8
Now on Lion 10.7 Facetime 1.1 will not authorise me..
"The server encountered an error processing registration. Please try again later."
The error code is the same whichever Apple ID is used, and even if a non-existent user account is used. This seems to suggest that the bug is as likely to be with communication between Apple's servers and Facetime as it is a bug inside Lion itself.
Please sort it out Apple! -
After updating the software Mac won't Start!!! Plz help.
Hi last week I brought MacBook Pro 17" Lion 10.7.3, 2.4 ghz Intel core i7, 4gb Ram.
I updated its software before going for work in countryside. But now when I restart it stops on grey screen with apple logo after the blue screen.
I can mov the cursor but I login window doesn't comes up...
I didn't brought my Back up Drive to boot with....
I went through the discussions on my iphone and have tried doing all this ..
1. Went into safe mode and into disk utility and have verified disk and repaired disk.
Have also done verifying and repairing disk permissions. It goes all good but still when I restart it gets
Stuck on that grey screen with no login space.
2. Have also tried going into single user mode and tried doing those steps about Fsck
But only first time it says file modified and after that I tried it again and everytime it says disk is ok.
And then restarted it but again gets stuck.
3. Have also tried going into terminal in utilities and putting the commands that Kappy has tried to explain to someone through sudo chow.
And restart it but then also gets stuck on grey screen.
4. I tried locating /System/Library for editing the start up items but can't find that.
I will go back to main city in 2 weeks. Till then I can only start in safe mode. Any suggestion plz.Restart and hold down the command-r keys so the Mac boots to the Lion Recovery disk. Select Disk Utility and then run Repair Disk.
-
Printer installed perfectly and worked perfectly for 8 weeks. Made no changes to the system or the local LAN. But now cannot print because of "printer offline" status. How do I correct this?
this may offer some help:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02221706&cc=us&dlc=en&lc=en&product=3194498&tmp...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you. -
Prints on Windows connected printer...but printer keeps saying "Printing"
I have an HP PSC Photosmart 2401 connected to my XP computer, which is wirelessly networked to my iMac. I just finally got the printing to work (it was very hard to find a helpful site that told me to install the component in Windows allowing printing from UNIX machines), and it's working fine, except for one thing. My print jobs print fine now, but then the printer screen continues to say "Printing..." after the job is complete, and I have to hit cancel.
Hi Rebecca,
Please check which ppd file have you used to configure the new printer.
You can use the recommended ppd file to configure your printer(HP LJ 2015). You can download the post script ppd from :
http://openprinting.org/show_printer.cgi?recnum=HP-LaserJet_P2015
Please let us know if this does not resolve your problem.
Regards,
Rishi -
How can I print from my ipad2 to my hp 6210 all in one using printopia? I see my printer on my iPad, I select it and say print and nothing happens. The printer is connected to an older Mac with OS X 10.4.11 but I do have an imac in another room. I have trouble printing from the iMac to this printer also even tho share is on but the printer works fine with the old Mac it's connected to. My iPad has the latest iOS.
A few things to consider.
The computer Printopia is loaded on must be powered on and must be able to print on the printer that is being shared. If the iMac is having problems printing to the printer it could indicate a problem with the share setup. -
JJust had problem corrected due to frozen imac, now HP printer will not print. Says it is not connected. What do I do to fix it?
To reset the printing system:
Choose System Preferences from the Apple menu.
Choose Print & Scan from the View menu.
Hold down the Option key while clicking the "-" (Remove printer) button. If no printers are currently added, hold down the Control key while clicking in the box that appears above the "+" (Add printer) button, then choose Reset printing system… from the contextual menu.
When you've done the above you'll need to re-add the printer by clicking the + (Add printer) -
Please help - new printer HP 8600 not working. It says printer is unavailable. It was working yesterday?
Try running the HP print diag found here.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee. -
Before Firefox open the little window opens saying"wait installing new updates." Then after when opening Firefox, my home page says "can't find this page. I have plugged in the address: http://www.google.com/firefox?client=firefox-a&rls=org.mozilla:en-US:official and it Firefox still won't open. I have to run the Firefox setup 3.6.3 on my desktop, to get Firefox to open on my home page. I would like to stop these automatic Updates from running; how?
Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?
Maybe you are looking for
-
Anyone else having problem with Look up feature on their mac? I think it use to be one finger tap, now its three finger. But it doesnt work.
-
Below you can find the complete message (in Dutch) that I receive "Kan de beveiligingscomponent van de toepassing niet initialiseren. De meest waarschijnlijke oorzaak is problemen met bestanden in de profielmap van uw toepassing. Controleer of deze m
-
Beautiful iMac, nasty SPDIF interface ......
Bought myself an iMac, use it in living room, connected to home-theater system. BUT! ..... when the SPDIF output of the iMac is used, then you disable the local (screen) sound. This is very unhandy because when you want to view/listen to a videostrea
-
Faulty touch screen for my Droid Incredible 2
I have a Droid Incredible 2, but I am having a tough time being positive about it. The lower edge of my touch screen has become non-responsive and/or finicky at random times. While on the desktop, I often can't get the "Phone" button to work. It i
-
How to Restore my Privacy Settings on Mac OS X?
Hi everyone, my mate had changed my privacy settings including Master Computer/Admin settings on my Mac OS X Snow Leopard (bought in Sept. 2009 in NY) while I was a away, and obviously now I cant access it anymore. He doesn't remember exactly what he