After updateting to 9.3 specific files causing crash when print starts

After updating to 9.3 some files, not all, are no more possible to print without crashing acrobat.
One example you can find here:
http//europe/giga-byte.com/FileList/Manual/motherboard_manual_ga_ep45_ds3(r)_de.pdf
Error:
arobat.exe 9.3.0.148 with modul ssgs1.dll version 03.0.0 at address 0x00012ea9
(ssgs1 belongs to Samsung printer ML1210)
With 9.2, one week ago, there was no problem.
If I start printing the copmplete file(a couple of pages) the printer starts printing and prints the whole file, but after a couple of seconds acrobat crashes.
Theb print will NOT be stopped, the file will be printed cpompletly with ALL pages.
If I try to print separate and single pages, the FIRST page can be printed without crash.
Any other page will crash acrobat immediatly.
I sepate this error page (take out 1 page) to get a separate pdf file will cause the same problem.
If I copy this page to Word and then save from there as pdf - no error.
Print "as picture" also no problem.
Export to pdf/A (whatever this is) will cause the same problem
Save as ...pdf - same problem
Save as optimized -same problem
Software: "Advanced pdf Repair" will not repair this
This problem was not be be seen with elder version 9.2 last week
This does not happen with ALL pdf files
System: XP SP3
Action taken:
Repair acrobat
Reinstall printer driver

I had to rebuild the thumbnails after the first try, and so on the second try, it cleared up the distortion. However, the photos then had the rotation and out of sequence issue. I certainly can try again. You previously mentioned that it make a few times.
As for the view, they are sorted by date. It is really strange since it is only the photos at the very beginining. These are photos where I had to manually enter the date when adding them to the libary. I wonder if that has anything to do with.
I really appreciate your time and advice. This is pretty unusual for me. I have been using macs since 2004 and never has a software upgrade thrown me for such a loop.
Thanks again.

Similar Messages

Acrobat Causes Crash when Print is Canceled

When I hit "Cancel" after the "Save PDF File As" screen appears, my PC hangs. The task manager shows 100% CPU usage. The process that is using up the CPU resource is dumprep.exe. I'm using Acrobat 9.3.2, XP SP3.

I tried "everthing" to fix this, but in the end it was simple.
Delete all printer drivers, except the one you actually need (one of them must have been causing the problem!), add back the others if required.

Satellite C660-23M - driver causing crash when program starts

I have loaded a CAD program on my new 64bit laptop, the program will start then stops and windows closes it. In the crash reports the modules ntddll.dll and aticfx.dll both seem involved. Could there be some conflict, can I update a driver somehow?
I have seen a report on a gaming website that the aticfx.dll isa the problen on the c660 range.
Please help or the machine goes back to the shop.
PS I have tried running in compatibility mode and disabling antivirus but the problem is unchanged
Regards Ian

Hi
I think the CAD application is not fully compatible with the preinstalled graphic card driver.
The ntddll.dll files is part of the windows system and aticfx.dll file seems to be a part of the graphic card driver and therefore I think that you would need to use another graphic card driver.
The notebook seems to support an Intel HM55 HD graphic card. Try to update the driver using the newest version from the Intel page.

Screenshots to Pages doc causes crash when printing

I'm creating a document on Pages that has several screenshots on the document (creating a user manual). When I try to print the document, Pages crashes and it will not print. I removed the screenshots and was able to print. I deleted the original screenshots and created new ones with same issue. It places them in my print queue on hold, but when I tell it to resume it just deletes it out of the queue.
Outside of telling me not to use screenshots, does anyone know a fix for this?
I'm using Pages '09, version 4.1.

Are they straight (plain) screenshots?
In what file format?
Have you put any special effects on them, such as shadows, reflections, frames, transparency?
How many screen shots, and how many per page?
Have you tried printing just one page with one screen shot on its own? If so what happened?
As fruhulda says, what printer? …and do you have the necessary printer driver installed?
Peter

Long files hierarchy causes autocad to crash when printing to a pdf

Long files hierarchy causes autocad to crash when printing to a pdf.

Tylerdowner,
Uninstalled and reinstalled Flash. No change. The only thing that seems to consistently resolve the problem is disabling the Flash plugin.
I tried creating a new profile, but when I transfer the data suggested in this:
http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
I get an error window when opening firefox with the new profile ...something about security settings not working correctly...but I can print every time even though the Flash plugin appears to be installed and enabled. So I assume there is some kind of problem with my current profile. Any suggestions on how to find and correct it or a way to get most of my data into a new profile...that works...would be appreciated.

Xcode 3.2.3 is not working after installing on Mac 10.6.3?As when I start Xcode it is giving error"An unknown installation error occurred"

Xcode 3.2.3 is not working after installing on Mac 10.6.3?As when I start Xcode it is giving error"An unknown installation error occurred"
provide solution.

Well I didn't enter a hostname from my ISP, but I did need to enter as a Host Domain the sub-domain (CNAME) that we use for our server. Don't know all the proper terminology, but I hope that's clear enough to someone to help. As soon as I did that, it worked again.
Thanks for the tip,
W

I have purchased a new macbook pro model no 840ll/a after the first installation i shut down the coputer. when i start gain i cant . it is asking the passwoerd and i dont remember what is the password . please help

i have purchased a new macbook pro model no 840ll/a after the first installation i shut down the coputer. when i start gain i cant . it is asking the passwoerd and i dont remember what is the password . and when i give the apple id password it is not accepting . what to do

i am able boot my system because of wrong password . how to open

Firefox causes crash when using Youtube explorer does not have the same effect

firefox causes crash when using Youtube explorer does not have the same effect

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

HT3275 How do I find/restore files from items in secure home folder? How do I find/restore files that crashed when in finder of secure (File Vault) home folder?

How do I find/restore files from items in secure (File Vault) home folder? How do I find/restore files that crashed when in finder of secure (File Vault) home folder? When I go into Time Machine, I see earlier dates but can't see files in my User File. I have File Vault turned on and see my home folder as a sparsebundle. Do I neede to restore this in order to see files in my home folder. When I click on it to restore it gives me an estimated time of over 2 hours. Also tried to restore an Excel file I was working on when computer hung, so lost it without saving or naming it. Does it exist anyplace and can I restore it?

Thanks. I had pretty much figured out from other posts that I had better turn off File Vault for my home folder and use a disk utility sparse bundel for little information I wanted to secure. The information about File Vault 2 in Lion was new and useful though.

Report file size limitation when printing?

Does anyone know of a file size limitation when printing a .NET run Crystal report? We run a browser app, which opens a new browser when a report is printed. That works fine. When we PRINT, the ActiveX print dialog box appears. If the report is large (> 40 pages or so) it crashes our entire application. It works ok if we export to PDF then print, but I am trying to get to the bottom of why it is crashing.

Hello,
What version of Cr and .NET?
Does your printer have limited memory?
Is it local printer?
Have you tried installing the latest Drivers for it?
What Browser are you using and have you tried any other?
40 pages not much local memory so it shouldn't be a problem.
Create a new Printer and select File rather than port or LPT as the destination to see if it's a physical printer or network issue.
Try a different printer altogether also.
Also refer to Rule of Engagement posting before submitting your question so you provide as much info first.
Thank you
Don

Specific site files causes crash

We have a crash when opening html files from a specific site.
The cache was deleted
The files where refreshed from those on the web server
Other sites on the hard drive have no problem opening files
Vista 64 bit
I'm stumped..................
Problem signature:
Problem Event Name:    BEX
Application Name:    Dreamweaver.exe
Application Version:    10.0.0.4117
Application Timestamp:    48c874b4
Fault Module Name:    StackHash_fd00
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    00000000
Exception Offset:    1b5f0068
Exception Code:    c0000005
Exception Data:    00000008
OS Version:    6.0.6001.2.1.0.256.1
Locale ID:    1033
Additional Information 1:    fd00
Additional Information 2:    ea6f5fe8924aaa756324d57f87834160
Additional Information 3:    fd00
Additional Information 4:    ea6f5fe8924aaa756324d57f87834160

Hi
Do you have the 8k bug described in this article - http://forums.adobe.com/thread/417116?
PZ

Office 2010 - Opening Network Files causes crashes

Our users documents are mapped to network storage via a Home folder location. Our treasurer has began encountering an issue with Office 2010 with Word (this is where I've been putting most of my effort) and Excel, other programs not tested.
Upon going to 'File->Open' it automatically redirects to his Home folder on the Network drive, and Office goes through it's various stages of crashing (encountered an issue, etc.) I've copied the contents of one specific folder he does most of his work in
to his desktop, but this is not optimal. Opening the contents from the desktop yields no issue.
As far as troubleshooting goes, I first tried doing a repair, then reinstall, and finally an advanced uninstall with Revo figuring it may be a corrupted registry key. None of this worked. I Googled some info on it and found add-ons commonly caused an issue.
I went as far as recommended by a MS support article, ultimately removing both the entire add-ins folder in Program files and in the registry. Still an issue. I progressed through various other support articles, removing various further keys (settings, toolbars,
etc.) Still occurring. I landed upon a technet article with nearly an exact issue, and it recommended updating as MS had fixed this various issue. (duh!) Update-wise, it was pretty far behind because all of our updates are signed through SCCM, regardless,
I have it fully updated up to Office Service pack 2. It's doing selective startups through msconfig as well, down to only Microsoft services. Finally, I've tried sfc /scannow, as well as safe mode, and neither had promising results (it was the first time I
was really hoping for sfc to find an error!
Just for further reference, I've tried all fixes in this article (before realizing it was only on network docs.) http://support.microsoft.com/kb/921541/en-us
As well as everything here: http://social.technet.microsoft.com/Forums/office/en-US/a31f0a8e-e371-420f-a3f3-f85713f7ac0f/word-crashes-when-trying-to-open-file-from-network?forum=word
I attempted the crash dumps in this thread but was ultimately unsuccessful http://social.technet.microsoft.com/Forums/office/en-US/95bc7898-e92d-4e47-8f73-390dba53e851/office-2010-applications-can-not-open-network-files-without-crashing?forum=officeitproprevious

Hi,
Have you found anything in event Viewer?
Press Win + R and type “eventvwr” in the blank box, then press Enter.
You may find some information to determine the issue and post the information here to let me know more about this issue.
You can learn how to user event viewer from this link:
http://www.howtogeek.com/123646/htg-explains-what-the-windows-event-viewer-is-and-how-you-can-use-it/
Regards,
Melon Chen
TechNet Community Support

Editing text in Photoshop CS3 file causes crash. File originally created in Photoshop CS6

Trying to edit text in Photoshop CS3 file causes a crash - Tried on multiple PC's
File originally created in Photoshop CS6 with "Maximise PSD/PSB File Compatibility" set at "Always".
Document size A4, using Arial Regular. RGB. 8Bits. 72dpi
Colour Profile: sRGB IEC61966
Multi business licence for CS3 and CS6 Design Standard/Premium/Master Collection all on PC
Please Help!

Interestingly I have found that if I modify a document in CS6 from an earlier CS3-CS5 document and save it - it works fine. But if I create a new document in CS6 the issue persists.
Looks like I will be modifying old documents for the time being
Would be grateful for some advise eon this.

Combining multiple files causes crash

I am using acrobat pro 11.0.10 on Mac Yosemite latest version OS X. When I try to combine multiple pdf files with more than say 10 pages the program simply crashes when I try to save the binder that Acrobat creates - no warnings, no alerts. The pages I am trying to combine are actually from other pdf documents that are readable, usable etc. The creation of the binder doesn't appear to create any issues - it is only when I try to save it. I'm actually combining about 400 pages and started doing it in blocks of 100 pages or so, but am now down to blocks of 20 pages - so it is a but tedious doing only 20 pages at a time. Has anyone else had this problem?
thanks
John

Hi ,
I would like to know did you try the insert command instead of combine files command ?If not ,then try the following and compare the output and see if acrobat again crashes or not .
You could also try a repair of your Acrobat and see the results .
Let us know how it goes .
Regards
Sukrit Dhingra

File causes crash

Everytime I try to open a certain file, inDesign crashes. I really need the file. Help?

Moving this discussion to the InDesign forum. Can you please provide a few more details such as what version of InDesign you are using? Which operating system do you have installed? Do you receive an error message?

After updateting to 9.3 specific files causing crash when print starts

Similar Messages

Maybe you are looking for