After updating ipad2 to version 7.0.4 sound quality of music and other files have deteriorated. What to do?, After updating ipad2 to version 7.0.4 sound quality of music and other files have deteriorated. What to do?
After updating iPad2 to version 7.1.04 sound output of the device have deteriorated. Any solution
I don't understand why ITunes doesn't have an update version available instead of a total download. Also, do I need to get rid of version 4 when I am done downloading? Because if I don't like this version, I want to uninstall it but keep the original version.
In order to update it has to remove the old version so it can properly install all the new files that are apart of the new version. THis is why you download the whole program and this is why you don't have to worry about "Gettin rid" of itunes 4 because it will remove it for you.
From there, I have to do a total install, which, according to my file download, takes approx. 9 hours,what happens if I accidently get disconnected again?
You need to get you a "Download manager" if your on dail up and install it. With these programs it will save any "Incomplete" downloads should you get disconnected AND most will auto reconnect too to finish the download. Just make sure you SAVE the download.
Isn't there any other way to put music in this ipod?
Yes and no, you need the new iTUnes 7 if you plan on using itunes to manage your ipod. THe new iTUnes 7 has the ipod software needed for your ipod, since the ipod is new all other older itunes will not have it.
There are other programs you can use with the ipod, but its highly recommended to use itunes with it
Similar Messages
-
In Pages, In the past, I was able to edit a template and "save a version" to update the template. Now i have to rename the template to save the changes. Why is this happening? what happen to "save a version"? its no longer an option under "file". And I can no longer open the actual template, when template is clicked, it automaticaly opens an "untitled" version???
In your description you say the first document opens as the Title you gave it.
Templates always open as Untitled so it sounds like you have saved a regular document, perhaps into your templates folder which is possible.
Since you have already worked on it and it has been previously saved, Lion will now Save for you and Save a Version is available
The other document does open as Untitled so sounds like a real template and as Peggy has pointed out will not have either Revert nor Save a Version until you Save it and have changed something in it.
This is a classic example of just how Apple's supposedly "simplification" of the process, is leading to confusion of what has happened. That the conditions and resulting actions from those conditions is so convoluted says it all.
It all reminds me of the Monty Python Life of Brian sketch with the "simplified" John Cleese instructions to the class, as to if you have a brother in an older dorm whether to hang your hat and bag on the hooks provided. The trouble is Apple does not get the joke, that it is transforming itself into a frequently self contradictory bumbling bureacracy. The price of unchallenged self appointed geniushood.
The incoherent half baked stumbling juggernaut has reached new triumphs with its edict on enforced Sandboxing on developers when it is unable to follow even its own instructions.
Peter -
I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?
Hi pholewinski!
I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
Disgusted
Your firewall or av software is screwing everything up.
Turn it off.
Straight from Apple:
Errors 3000-3999 (3002, 3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, an old version of iTunes is installed, an entry in your hosts file redirecting requests to gs.apple.com (see error 1004 above), or because of your Internet proxy settings. If you are using a proxy, try without using one or with a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues. Error 3014 may indicate that you need to free up more disk space on the computer before trying to restore again. Error 3194 most likely indicates you do not have the latest version of iTunes installed Update to the latest version of iTunes.
http://support.apple.com/kb/TS3694#error3004 -
I've tried to do this several times on several days, on an HP a1620n running Windows XP Media Edition, Version 5.1. Nothing happens after I get the Download Complete message. Thanks.
Thank you! My solution was slightly different, but in the end, seeing what was going on in the Help menu in the browser did the trick. Turned out I had been stuck for who knows how long "downloading" a version 3! Also had a toolbar to disable but not the Ask.
-
Does anyone have an answer? I can't get apple support. I have files that I need that I can't open because I get an error that there is a new version of numbers, but I have already downloaded it.
Mrs. Pete,
Please see this post:
https://discussions.apple.com/message/25041300#25041300 -
Good morning everyone,
Since the most current version of itunes has become available for update, I will periodically get update notices to upgrade my existing version of itunes.
The problem (which, BTW, has never happened before in the 2 - 3 years I've had itunes on my WIN XP Pro SP3 computer)...is the update will proceed normally for about 10 minutes, then a dialog box opens stating that "A network resource needed is unavailable." It also offers the option to look elsewhere for a particular .msi file which it claims it cannot find (at the C:\...\.. link it displays...with a [BROWSE] button beside it.
Does ANYONE have ANY idea just what is happening here and how to resolve this very, increasingly-annoying, issue? As I indicated earlier...this issue has NEVER happened before. ALL previous updates have completed without incident. I have also tried doing updates from other Internet sites with the same unacceptable results.
NOTE: Itunes is ONLY on my WIN XP Pro computer. I have NO Ipad, Ipod, Iphone, etc.
Thank you for your time and any enlightenment!Many thanks.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I am getting messages that I can't download and read .pdf files since I have the wrong Adobe reader. I know about their security disasters of course, but I downloaded the latest version of Adobe Reader from the Adobe web site and I have other ,pdf file readers as well, and for some reason they won't work either. I have 5 computers running top end processors and RAM. By this I mean I have one, this one which I am using that has an AMD Phenom Black 3.2 Quad-core with 8 GBs of Corsair top DDR2 RAM, my other two AMD have either an Athlon II triple core with 4 GBs of DDR2 Corsair RAM, one with the Phenom X4 965 3.4 GHz Quad-core with 8 GBs of their best DDR2 RAM, and two Intels with the i7 920 Processors using the triple channel 1366 socket processors and one with 8 GBs of low latency DDR3 RAM and the other with 4 GBs of the same RAM. I am getting the message on this one, which has a fresh install of XP Pro X64 operating system, as do the other 4 as well. I have run Avast Business Pro Anti-virus on this one, which I am getting the message on with a single result which I deleted, and also both Spybot Search and Destroy, which came back clean as well as Malwarebytes Antimalware, which got a lot of tracing cookies now removed, and SuperAntiSpware which also found a few cookies also now deleted. Can you tell me what I need to do to get these files to show as .pdf files rather than as a clean blank page. One other issue is that I wish to know how to turn off my downloads so they are saved and Mozilla will give me the option of returning them instead of me losing them all together as it does now. Thanks for your assistance. If there is another Adobe reader I should download and install, could you provide me with the link to it? I appreciate your assistance here
== When I download and try to read a .pdf file and when I am asked to turn off all Firefox files and if I do, I lose them since I need to know how to save them without rebooting my computer.Brilliant! Problem solved! Thanks so much.
-
I receive the message: The file "iTunes library.itl"cannot be read because it was created by a newer version of itunes. I do not know exactly what this means. I have Windows 7 on my computer and was able access itunes until just recently. I have tried uninstalling and reinstalling itunes multiple times and that does not work. Sometimes I can get in when immediately after installing, but then if I close it, i cannot get back in. Now, i can't get in at all.
That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
I have files that may have been created in various versions of Illustrator. We need to be able to open them, but all we have is CS6 suite. I have called and been told that "technicians at adobe" could perform a paid service to find out what the files were created in and get them to be useable in InDesign 6, but I'd need an email address that was registered to our software to give the help desk person. After finding the correct email address, different adobe help number people told me to come here to ask as there is no phone support. Can anyone get me to an adobe technician that can provide a price quote for finding out what created these files and for getting them converted? Thanks.
Sorry, I understood you to say you had the whole CS6 suite, which includes Illustrator.
As far as finding out what the files are, sometimes you can look at them in a text editor to figure this out. See below; the, Creator Tool line. Not every software package makes it this easy, though. -
I need help with java on windowsXP after updating iTunes to the latest version. My java will not work and I get error message need java virtual machine to run applet window. Did not have this problem prior to the iTunes update.
Please help, ThanksIf your library was working on your computer and then popped up empty all of a sudden then this might be what you need...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
Went to open a file in words and got message. "You need a newer version of Pages to open this document." I have latest version. All other files in words open w/o a problem. Please help.
Thank you.
<Email Edited by Host>You have 2 versions of Pages on your Mac.
Pages 5.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed almost 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Peter -
I use pages to draft forms that i repeatedly edit and use in my business. Ex: letterhead, envelopes, and legal forms. I recently drafted a legal form
for a client. saved it and then reopened and printed the next day. now when i try to open that form, ( or letterhead or envelope) i get a message that
it wont open and that i need a newer version of pages. but my pages software is up to date. Whats up with this??You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Note: Apple has removed over 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter -
I downloaded Iphoto 11 9.2 from the apps store (was on iphoto '09 before version 8.x) and when opened it for the first time it tried to update my photo librery and ended up corupting it to the extreme that I had to get a backup from time capsule and downgrade my iphoto version. I spent yesterday 6 hours at the genius bar in an apple store and they were not able to provide me with any other solution. In the emantime, I have to forget about about photo streaming... Any idea, is this a bug that somebody knows how tp fix?
In fairness, this isn't an issue in iPhoto 11 but one in your Library. Some file or other in there is damaged and that's what causes the crash during the upgrade.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. -
I don't get this clipboard thing! I have created two files, one for the MS with mark-ups, and one for the unmarred version, each living in their own spot in my "house." It seems to be merging the two versions and I have to go in and re-paste and then it always says "you have placed a large amount of text on clipboard do you want to be able to access this?" and it prompts me to say no but I am afraid I'll lose my day's work so I just tap cancel. I highlight the day's revision and select "copy" to paste into the unmarked doc. before I save on the marked up or working doc. It is when I try to close that one that the clipboard issue pops up. What can you tell be about saving doc. in two places and how to NOT get it on clipboard? Thanks! I am not super computer savvy so layperson's language much appreciated!
Are you using Microsoft word? Microsoft thinks the users are idiots. They put up a lot of pointless messages that annoy & worry users. I have seen this message from Microsoft word. It's annoying.
As BDaqua points out...
When you copy information via edit > copy, command + c, edit > cut, or command +x, you place the information on the clipboard. When you paste information, edit > paste or command + v, you copy information from the clipboard to your data file.
If you edit > cut or command + x and you do not paste the information and you quite Word, you could be loosing information. Microsoft is very worried about this. When you quite Word, Microsoft checks if there is information on the clipboard & if so, Microsoft puts out this message.
You should be saving your work more than once a day. I'd save every 5 minutes. command + s does a save.
Robert
Maybe you are looking for
-
Dear Experts, We required MRP at Company code level. We have 33 plants for MRP run , While running MRP system has to consider Finish Goods stocks of all plant's location should be consider for Availiblity check MRP run carried with scope of planning
-
Is it possible to rotate video from the iPhone 4 90 degrees?
I'm a newbie and unfortunately shot a bunch of HD video with my iPhone 4 in a vertical format - now on playback it's rotated 90 degrees to the right. Is there any way to rotate the video 90 degrees to the left so it appears correctly on playback? I d
-
Can't login to client computers
Hello, I try to evaluate Leopard Server for my home network and have come to a dead end. The most important task for it would be to share user accounts among several client computers, that is to finally use portable homes. I tried to set up networked
-
My Apple TV won't connect to iTunes tonight. Is there a problem with iTunes in Australia?
-
Untill today FF has been great now when starting get firefox has stopped working message
Windows 7 pro. HP Pavilion D3 laptop 4 gb Ram. All was good up until this morning and then FF will not open just get below error. Have uninstalled and reinstalled no joy