After updating iPhone to iOS4 firmware it can't connect to internet

I updated to my iPhone to the iOS4 firmware, but it can't connect to the internet. i opened up Safari and waited for it to load, but a window popped up saying " Cannot Open Page Safari could not open the page because the server stopped responding." I can't connect to the internet with the AIM, Facebook, and Twitter apps. I have full bars. I can make and receive calls. It is 3G on my status bar. I can connect fine with Wi-Fi. I already reset my network settings, reboot my phone, and restored my phone, but I still can't connect to the internet. HELP ME!!!

ok the same thing happened to myself. I contacted att technical support and we put our heads together. I had to plug my iphone in to connnect to itunes. From there, you will need to restore your iphone as a brand new phone not from your last backup. so remember restore as a brand new phone. you will lose your contact information so write down your numbers but none of my apps were lost. (Restore as brand new phone : it will prompt you) This worked for me and my internet is back on. Good Luck

Similar Messages

  • After updating to iOS 6 my ipad2 "can not connect to iTunes Store"

    Can some please help me know how to get iTunes working again on my iPad2?  After updating to iOS 6 my ipad2 "can not connect to iTunes Store" message keeps popping every time I try to launch iTunes.

    I dont even get a message. It just has ablank screen. I can see all of the options on the bottom but nothing loads. Any ideas? I am trying a restore now

  • After updating to 10.6.7 I can't connect wirelessly to iCal any ideas?

    Hi Everyone,
    Here is my problem, I have an ipod touch and an iPad that I have been able to connect to my iCal server, and update everything just fine. After I updated my server to 10.6.7 I can't connect to my iCal Server. Funny thing is I can connect with my 2 mac mini's that are hard wired and my Macbook Pro which is wireless. For some reason its just the 2 portable iOS devices that can't connect. I haven't changed any setting at all. Of course I use my portable devices to access my calender the most when I'm on the go. Any ideas would be great! As always thanks for any help in advance. Also if you need any config info let me know and how to do it. I know very little about command line.
    Thanks
    Kcam1999

    Hi Kcam
    Have you also updated your iOS devices to 4.3.2?
    Taylor

  • After updating to 10.8.1 i can not connect to wifi   no hardware installed , it says

    When I installed the update to 10.8.1 there comes a message that there was a problem by installing.
    Now i can not connect to a wifi network, when i click on the wifi at the bottom
    No hardware is installed
    Why is there no hardware installed?
    Under 10.7 all was fine

    I have MacBook unibody late 2008 with OS X Mountain Lion on board. Wifi stopped working suddenly and I spent about four terrible hours to solve a problem.
    Actually, none of mentioned and googled advices helped me out to solve this issue with 'WiFi: No Hardware installed'.
    Except one thing: using the wifi kext from the Snow Leopard. You may use utility and kext from here: http://rys.sommefeldt.com/2011/09/04/osx-lion-wifi.html
    I hope, this can help.

  • I updated to ios6 and now I can't connect to internet...need help!

    I updated my ipod touch 4th gen. to ios6 and now I can't get it to connect to the internet.  I'm not sure what to do.  I have typed in the correct server name and password yet it still says "unable to connect."  Does anyone know what I can do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • I have a new iphone 5. After update and download some programs I can not just turn it on and shown in the LCD "iTunes" with a picture of a USB cable. - Alguine can help solve the problem. thanks

    I have a new iphone 5. After update and download some programs I can not just turn it on and shown in the LCD "iTunes" with a picture of a USB cable. - Can anyone help me solve the problem. thanks

    Its trying to tell you to connect it by usb to a computer to reflash a failed firmware flash
    You should comply

  • I have no service and i cant activate my iphone 3gs after update to ios 5.0.1 can anyone help ??

    i have no service and i cant activate my iphone 3gs after update to ios 5.0.1 can anyone help ??

    touch me wrote:
    it says ICCID: unknown
    Not a good sign. Try forcing the phone into recovery mode & restoring it. If this fails, make an appointment at an Apple store:
    Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • After updating iPhone 4s to 7.1.1 My wife can no longer get 3g signal at her work

    After updating iPhone 4s to 7.1.1 My wife can no longer get 3g signal at her work. Other un-updated iPhones still work fine. IOS 7.1.2 does not fix the problem.

    Hi there Salient2,
    You may find the troubleshooting steps in the article below helpful.
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    -Griff W. 

  • After updating iPhone to 7.0.2 Personal Hotspot USB can't connect, whats the fix?

    After updating iPhone to 7.0.2 Personal Hotspot USB can't connect, whats the fix?

    Try this iMessage workaround
    Look for a fix by Apple by the end of the week.....

  • HT1933 I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 i

    I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 issue ?

    Hi were you able to resolve yours?
    I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
    Perform a hard reboot
    Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on.

  • I have iPhone 5 after update iOS 8.0.2 I can't charge my mobile? Pls help me

    I Have problem with my iPhone 5 after update iOS 8.0.2 I can't charge my mobile. Pls help me.

    Hello TEKWANI,
    Thank you for using Apple Support Communities.
    The following article should help with the troubleshooting. Specifically, the section "Power/Battery > Battery or charging issues".
    iPhone: Hardware troubleshooting
    Regards,
    Jeff D. 

  • Problems after updating iphone 4 to ios4.3.5

    After updating iphone 4 to ios 4.3.5 i am not able to open any apps.
    Only basic, phone and app function avaliable.

    I recommend you try this method if you haven't already...
    https://discussions.apple.com/message/15938361#15938361

  • After updating iphone 4s to 6.1 version my battery percentage stood at 1 percent. Does anyone has same problem? Or its update bug?

    After updating iphone 4s to 6.1 version my battery percentage stood at 1 percent. Does anyone has same problem? Or its update bug?

    THIS is "quite a few": https://discussions.apple.com/thread/3391947
    As are these:
    https://discussions.apple.com/thread/3391947?tstart=0
    https://discussions.apple.com/thread/3484755?tstart=0
    https://discussions.apple.com/thread/3481668?tstart=0
    https://discussions.apple.com/thread/3518760?tstart=0
    https://discussions.apple.com/thread/2755090?tstart=0
    https://discussions.apple.com/thread/3507356?tstart=30
    https://discussions.apple.com/thread/3482083?tstart=60
    https://discussions.apple.com/thread/3492588?tstart=60
    https://discussions.apple.com/thread/3397244?tstart=90
    And older ones:
    Battery Meter/Life Problems with 4.0.2
    4.0.2 guzzling my battery. Your's too?
    4.0.1 battery life
    Battery runs out very quicky in iOS 4.0.1
    Battery nearly nonexistant after 4.0 upgrade
    Dead battery after few hours on standby using 4.0 software
    3.1.3 battery problem
    OS 3.1.3 battery issues
    3.1.3 upgrade - shortened battery life?
    Battery life cut after 3.1.3 update on iPhone 3G
    3.1.3 Firmware is a battery killer - how do I back out this upgrade?
    Poor battery life with iPhone 3G running 3.1.2
    3.1.2 EXTREME battery drain - what gives?
    3.1 Battery nightmare
    iPhone 3GS with fw 3.1 – battery life gets even worse
    Battery Issues with 3.0.1
    BATTERY drain with 3.0
    upgrade to 3.0 drains my battery
    Battery Drain after Update 2.2.1
    Battery Life Radically Decreased after 2.2.1 Firmware Update
    As you can see, battery issues have been common since the first iphone, frequently reported after an upgrade, but not always. So to blame a specific version doesn't describe the problem sufficiently to find a resolution.

  • After updating to Ios6 can not connect to internet on 4G on my 4s, After updating to Ios6 can not connect to internet on 4G on my 4s

    After updating to Ios6 can not connect to internet on 4G on my 4s, After updating to Ios6 can not connect to internet on 4G on my 4s

    Tap Settings App > General > Reset > Reset Network Settings. Relog into WiFi, see if better. If still problem Restore iPhone with iTunes 10.7 or 11 on computer. See if better. If still problem, and if there is Warrany or AppleCare make Genius reservation and take to Apple for resolution.

  • After updating iPhone to OS 8 I am not receiving messages on iPad or iMac

    After updating iPhone to OS 8, I no longer received text messages sent to iPhone on my iMac or iPad.  Before update, I would receive text message on all devices.  Why are the iMessages no longer syncing between devices?

    Check Settings>Messages on all devices. Make sure the "You can be reached at..." section has the correct email(s) and phone number.
    ~Lyssa

Maybe you are looking for

  • OC4J 9.0.2.1.0

    Before you say "your still on that version????", yes we are and there is nothing i can do about it for the moment. I've recently put together an app with J2EE1.3 (oc4j 10g) and have been trying to downgrade it to J2EE 1.2. So far the app is in a depl

  • HT1495 I have 2 iPhones for 2 different phone numbers and a new ipad. Is it recommended to use 1 Apple ID or not?

    I have 1 phone number with an iPhone 4 and I have got one more number with an iPhone 5s and an ipad air. I don't know if to set the new devices (5s and ipad) with the same Apple ID or not. Of course I would like to use the same contacts and emails on

  • Aet tool discussion

    while creating the custom field through AET we will get the option to select the business objects to choose . there we will get the list of business objects. these business objects where we can see in GUI level. can any one tell where we can these bu

  • AE CS6 and tearing of XD CAM EX Mp4 source footage

    Hi I'm getting tearing artifacts in CS6 when using XD CAM EX MP4 source footage. This does NOT occur on a colleague's CS5.5 install with the same files. I found a discussion from last year at http://forums.adobe.com/thread/1009064 , where the issue w

  • Test Idoc vs HR

    Good Afternoon. I want do a test for export data of some infotype of HR to a system external. i.e I want export only the data of the infotype 0000, 0001, 0006, when the employee have some change. I am using the T.Code and the system export the data.