After updating iso 6.1.3 in my 4s my phone is not working properly

After updating iso 6.1.3 my 4s is not working properly the main problem is touch is not working properly and battery problem also there pls anyone have some solution

IOS 6 has had a lot of issues to date. I have a possible solution to offer but I cannot be sure it will work. Two ideas.
1. Reset the phone: hold the lock button and home button in at the same time for 10 seconds. This does nit erase anything, it's basically like rebooting a computer.
2. Factory reset: Hook up to a computer and go to iTunes. Sync the phone (if possible). Once synced, in the summary screen select factory reset (or may be another name, I'm working from memory) it's right beside update software. This will completely reset the phone, you will need to restore it after the reset it complete. I don't know if this will help you, but it may. I hope you can fix it, good luck!!!

Similar Messages

Since the last update to iTunes 11.0.3 (42) the airplay connection is not working properly , keeping breaking up

since the last update to iTunes 11.0.3 (42) the airplay connection is not working properly , keeping breaking up, while the airplay works fine with my iPad and iPhone. Anyone has experienced the same? any fix available?

Hi Erdelestre,
Thanks for visiting Apple Support Communities!
See this article for some tips about troubleshooting AirPlay:
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
Troubleshooting performance issues with AirPlay or AirPlay Mirroring
If you are experiencing intermittent playback or significant network lag with AirPlay or AirPlay Mirroring, it could be due to a weak Wi-Fi connection, interference, or the distance between the Wi-Fi router and your iOS device, Apple TV or AirPort Express. Try the following suggestions:
Ensure that other devices are not trying to stream to the same Apple TV at the same time.
Turn off Bluetooth on your iOS device by tapping Settings > General > Bluetooth.
Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
If possible, try to locate your Wi-Fi router in the same room as your Apple TV and iPhone/iPad.
If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
If the Wi-Fi router has an external antenna, check to see that is it connected properly and in good condition.
Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
Best,
Jeremy

After updating to new version of Firefox, my paid for RoboForm will not work. What should I do? I MUST have it working. Thanks Jane

Yesterday I downloaded the new version of Firefox as suggested by you. Then my paid for version of RoboForm , which always has worked, would not work. I MUST have it working. What can I do now to solve this crucial problem? PLEASE send detailed info so I can follow exactly. Thanks, Jane P.

You need version 7 of RoboForm for Firefox 4. Version 6 will only work with Firefox 3.6.* or earlier.
If you have version 6 this may be viewed as a method to generate income by Roboform in forcing users to update to version 7 and not offering updates to version 6 to make it compatible.
An alternative free password manager that works with Firefox 4 is Lastpass - https://addons.mozilla.org/firefox/addon/lastpass-password-manager
If you have version 6 of Roboform and need to use it you will have to downgrade to Firefox 3.6
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

After updating to OS X 10.5.8 my cd-drive does not work.

I just installed OS X Leopard 10.5.8 on my 1.25 GHz eMac and the cd-drive was working great. Then after letting it install the 10.5.8 combo update the drive quit working. If I manual open it and place a cd in the drive it will read, use and eject the cd with the eject key on the keyboard. If no cd is in the drive it has to be manually opened.
Leopard does not even have my drive listed in the disk utility. It is listed under about my Mac.
I have found several threads on this forum with the exact same issue as I am having, but have not found a resolution to the problem. If no resolution is found I will have to reinstall Tiger.
Any suggestions or help would be appreciated.

Did you repair permissions after doing the update? Those updates move a lot of furniture around and I find a lot of mis-set permissions after applying most Apple updates.
NOTE: Starting with about 10.5.6, DU started belching all sorts of meaningless lines of permission repairs. You may not be able to tellwhat's mis-set as the spurious messags tend to hide the real repairs, but let it run anyway.
If that doesn't restore function, a PRAM ZAP may help. The computer may have lost tack of some of its devices in the update. Rare, but can happen.
If that still gives no joy, you can add an eject icon in the menu bar. If that works then at least you avoid the manual opening. Here's how:
(instructions are for Tiger but should work in Leo):
Follow this path: Macintosh HD -> System -> Library -> Core Services -> Menu Extras. Inside the Menus Extras folder is a little file named Eject.menu. Double-click that file and you get a handy eject icon near the right end of the menu bar. Clicking/holding it is exactly the same function as the eject key on an Apple keyboard.

I tried updating my iphone on monday but after updating, it was showing me an error about the phone coukld not be activated because the activation server is unavailable. what do i do please help out.i tried updating my iphone on monday but after updating,

i updated my iphone software on monday and as it was updating back it stopped and showed an error that the activation server is unavailable and that i should try again after some time i have been trying since monday but all to no avail i still get the same message again. kindly help out on wat to do.

This message usually indicates that your phone has been hacked/modified or jailbroken.
Was your phone ever locked to a different phone carrier? IF it was how did you unlock it?

HT1386 After updating my Iphone 4s with the new software, my phone will not show up in Itunes. I have tried several things but nothing works. Does anyone have any suggestions?

Help! I have recently updated the software on my Iphone 4s and now my Iphone will not show up in Itunes. Can anyone please help! I am very frustrated, I have tried several things but I cannot get it to show up

Double check the version of iTunes on your computer. You must have iTunes 11.1 or later.

After updating software to 8.2 on iPhone 6 both cameras will not work. Black screen.

I updated my iPhone 6's software to 8.2 and now when I want to take a picture the screen is black. If I try to activate the front camera it is also black. Sometimes it will work ok, however, most of the time it doesn't. I have also tried tapping the button to take a picture and the a preview comes up.... what?! Then I click retake and the camera will work. But I have to go through this whole process every time I want to send a picture. This must be a bug, Apple, please help! =(

seMONICAxy wrote:
I updated my iPhone 6's software to 8.2 and now when I want to take a picture the screen is black. If I try to activate the front camera it is also black. Sometimes it will work ok, however, most of the time it doesn't. I have also tried tapping the button to take a picture and the a preview comes up.... what?! Then I click retake and the camera will work. But I have to go through this whole process every time I want to send a picture. This must be a bug, Apple, please help! =(
Try resetting your iPhone.

I was doing the update of ios8 on my 4S and now my phone is not working

I Was updating for IOS8 on my iPhone 4S and now my phone is stock in connect to iTunes I connected but is not doing anything. I try to rebooted but nothing is working. What should I do?

I have the same problem. Updated an iPhone 4s to IOS8 but got an unknown error which advised me to enter Recovery mode. That worked OK and the phone is now recognized by iTunes. I restored the iPhone but it will not download my 3rd party apps. Gets stuck in sync after downloading one app. Nothing happens after that. Sync cannot be cancelled except by disconnecting the iPhone. Reconnecting the phone downloads one more app, etc.
Also my music library is missing on the iPhone. Playlists are there but there is an iCloud download icon next to every song. I did not turn on "iCloud Drive". ITunes is not downloading my music during sync, just the titles and artists and playlists.
Ideas?

I updated my phone with the update for applewatch and now my phone is not working properly with hondalink. Can anyone help?

I just updated my phone this morning. It's the new update for the apple watch. I have a 2015 honda fit with honda link. I usually play my spotify through the ''ipod'' source because it shows all of the song information. Since the update it will not play through the i pod source even if it is plugged into the car. Can anyone tell me how to either make the song information show up when I play it through bluetooth or how to make it play through the i pod source again?

Hi mrsmaybe,
I'm sorry to hear you are having issues with your iPhone after a recent update. If you continue to have issues connecting your iPhone to your car's stereo system, either hard wired or via Bluetooth, you may find the troubleshooting steps outlined in the following article helpful:
Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
Regards,
- Brenden

After installing iOS 5 beta 7 on iPad 2 / Home Button is not working properly :(

Hey guys,
my paddy is brandnew. Just 4 Days old.
I got it with iOS 4.3.5 on it. Everything was fine.
We`re developing for iOS, so therefore i installed iOS 5 beta.
Since i did that, i have Problems with the Homebutton.
Sometimes it reacts sometimes not at all.
Someone told me, "no support for beta"
I just want to know, if this could be a Software issue or if it is a real Hardware problem.
I heared that this problem appeared in a version of 4.xx as well.

There have been a very small number of users that have reported problems with the home button using iOS 4.xx. From what I have seen, closing apps seems to help in many cases.
No matter what you find on this site, you would be better off seeking help here.
https://devforums.apple.com/index.jspa

Smart Actions not working properly after software update

My Razr updated 2 days ago and since then my Smart Actions are not working properly.
I have my Work action set to turn the volume down when I'm at a certain GPS. It shows that "Work" is active, but doesn't turn the volume down.
Also, there are times (since I've owned the phone) that it will not connect to the network after coming off a Wifi Connection without rebooting the phone. I took it into a Verizon store and they did a hard reset, and that fixed it for a time, but it started doing it again.
Any help appreciated.

Hi mcclainkb, Let's make sure your phone works as you expect it to! Have you tried removing the Smart Action and setting it back up again? Are your other GPS services working as normal? After the hard reset performed in the store did you install all of the same application that you had before?
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

Applications not working properly after updating t...

After eventually updating to symbian Anna, I've noticed that some applications are not working properly, notably AccuWeather and Facebook. Uninstalled AccuWeather and re-installed it but still didn't work . Seems pointless releasing a software update and then to discover that applications from Ovi store won't work on your device! With Facebook I can only login in to my account but when I go to view a friend etc, it shuts down.
Has anyone any suggestions or solutions to the problem?
Thanks

i updated to the latest version 025.007 on my E7 too and a lot of the apps on the store dont work. Just blank screens.
Somebody do something!!
I use other devices, and havent faced this problem with any of them after an upgrade!

Touchpad not working properly after changing LCD and invertor

Product - HP Pavilion DV4 1318TU
I was having display problems, went through repairer. He changed the LCD, invertor and fixed some issues of motherboard(related display output). After fixing these issues i am facing touchpad issues. Touch is not working properly, and when I use USB mouse its working but after 1-2hr mouse is also not working properly. I connected to external monitor then touchpad is working fine without any issues. Kindly help me and tell me the root cause.
Thanks

Hey @ashfaque91 ,
Welcome to the HP Forums!
I understand the touchpad and mouse are not working on your notebook after having your display serviced.
It seems quite odd that they would work fine on an external monitor, and to be totally blunt this is something I cant even attempt to explain.
Was this service provided by an HP service provider or was it done by an independent provider?
Try using the notebook in safe mode to see if there is an issue with the display driver causing some kind of wonky issue. Without knowing which version of Windows you are running I cannot tell you exactly how to boot safe mode on your notebook, but you can find this information easily by searching "Safe Mode Windows #" in Google.
Other than this I would suggest getting back in touch with the service provider if the issue started immediately after they provided service to the notebook.
Alternately, you can call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Plug and play speakers not working properly after upgrading to Windows 8.1

After upgrading to Windows 8.1, my plug and play speakers do not work properly. I have uninstalled and reinstalled them, and restarted. When I try to play music, nothing comes out. If I turn them off and back on, music will play for approximately 30 seconds, only from one speaker, then it turns off and fades to no sound. They worked fine until I upgraded to Windows 8.1. The manufacturer has not been able to successfully assist me. Has anyone else reported a similar issue after upgrading OS software? Any suggestions? These are fairly new speakers, less than 2 years old, and not used very much. I do have them installed via a K-V switch, and all other devices linked to the K-V switch are functioning properly (monitor and wireless keyboard). Any suggestions would be greatly appreciated.

@sisboldt ,
Hello and thank you for posting on the HP support forums.
So that I can better help you with your sound issue. Please post back with your full model and product number. Use this link to help you find the information.
HP Notebook PCs - How Do I Find My Model Number or Product Number?
Here is another link you may find useful. Please give it a read before posting back with your system information.
Advice for asking the "Very Best Question"
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

After update iso 7.1 can not open all receiving videos from email or text .i dont know what to do., after update iso 7.1 can not open all receiving videos from email or text .i dont know what to do.

Can not open all receiving videos from email and text ( iphone 4s) after update iso 7.1

Can not open all receiving videos from email and text ( iphone 4s) after update iso 7.1

After updating iso 6.1.3 in my 4s my phone is not working properly

Similar Messages

Maybe you are looking for