After updating itunes to 10.5.2 i get an "itunes has stopped working" message and itunes closes.
When i am not connected to the internet it works so I'm thinking it has something to do with the Itunes store. I have tried unistalling and re-installing Itunes and it still does not work. Someone please help me I haven't used Itunes in 2 days.
did u fix it yet?
if u did can u help me cuz i havent use my itunes in like 3 days and its driving me crazy
Similar Messages
-
I get the "firefox has stopped working" message after closing browser
Hello.
My problem is that when I close the FireFox browser I get the "FireFox has stopped working" message. It's pretty annoying. I've read some other posts here that described a similar problem and have tried some of the suggestions in them including:
A clean install, a browser reset, running in safe mode, unchecking hardware acceleration, disabling extentions and plugins one at a time, uninstalling my antivirus (avast), rolling back to version 23.01 and checking run in compatibility mode that someone claimed helped them. None of this was effective.
It seems like after a computer restart the browser will be ok for 2-4 closings and then it will start with the message on every closing. Also, after I uninstalled avast it was good for 6 closings. Rolling back also gave me about 6 message free closings. But then the messages start and doesn't stop.
Is there anything else I can try? Thanks in advance for any suggestions.One thing is for sure, and that is if the only page i visit is the Google homepage (not logged in) or this site (mozilla forum), the problem does not occur, ever. I can't make it happen.
If i visit yahoo.com (not logged in) (or ighome.com, logged in), as examples, it happens every time. -
I updated to Firefox 4 and now I get a Firefox has stopped working mesage whenever I try to load any websites. I updated my video driver and cleared my history to see if that would help. I looked for a crash ID on the homepage, but the last registered crash is from February. I also tried to open in Firefox safe mode, but the problem continued to occur. I'm not sure what to do next, please help!
Try to (re)install the latest version of FireFTP.
*FireFTP: https://addons.mozilla.org/firefox/addon/fireftp/
* http://kb.mozillazine.org/Profile_backup -
After updating to OS 10.7.4 My Digital Optical Out Has Stopped Working
I use a Toslink connection and iTunes to listen to music files through two different audio systems. After the latest OS update the digital optical connection has ceased to work. I've tried it with another computer running an older OS and it works fine, no issues on either audio system.
Has anyone else had this problem and found a way to resolve it? I've spent 2 days with Apple Senior Tech Support and it's still not working.The first level of tech support checked that I had the current updated OS, did several reset procedures, then connected me with Senior Tech Support. They checked what first level support did, then had me remove the com.apple.audio.DeviceSettings.plis and com.apple.audio.SystemSettings.plist files from the Audio folder in my user library and restart. That didn't work, and I had to leave for an appointment. I was given a case number and called back today.
Today we went over everything that was previously done and talked about reinstalling the OS, however decided that would not work because it would just be the same version of the OS that caused the issue. It was suggested that it was a driver issue and I contact the manufacturer of my DAC to see if there is a driver update. Here is the response:
This is the first I've heard of this exact issue but we have been
hearing of a few issues with Apple's OS when they've done update
changes. They have been having some wifi issues that are causing other
problems too. Starting to sound more like Microsoft every day.
This is a driver in the Apple device controlling Apple's digital toslink
output. It is not something that we could provide because it is an
Apple issue in an Apple device. Unfortunately you will have to stay on
them to get this driver updated. Hopefully and typically they are
fairly fast.
The input on the CD306 is just a standard digital toslink input and has
no special needs. Stay on Apple and watch the forums for assistance.
The more people write or call them the faster you will see the driver.
This is your best shot. -
When I click on 'iTunes Store' I get a "iTues has stopped working" message. Why?
. . .then I have to close iTunes.
Hi, iTunes Store Help 12.
Thank you for visiting Apple Support Communities.
Here is an article I would recommend going through when experiencing issues with the iTunes Store.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
Jason H. -
Itunes has stopped working message when I close itunes.
Downloaded the latest version(10.7.0.21) of itunes today. Every time I now close itunes I get the following message:
It only happens once I exit itunes.The same problem here!... My itunes stucks on "preparing to sync" when sync my ipad 2, and stucks on iphone 4 calendar sync...
Any solution?? Need help, please!!
Macbook pro 13 i7
Iphone 4
Ipad 2
Thanks!!! -
Trying to play amovie just downloaded. Keep getting "Itunes has stopped working" message.
Trying to play a movie just downloaded. Keep getting "I tunes has stopped working" message. Any suggestions for fixing this?
Try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.
One thing is for sure, and that is if the only page i visit is the Google homepage (not logged in) or this site (mozilla forum), the problem does not occur, ever. I can't make it happen.
If i visit yahoo.com (not logged in) (or ighome.com, logged in), as examples, it happens every time. -
After upgrading iTunes, I'm getting the dreaded "iTunes has stopped working" message after launch. I've tried the troubleshooting tips on the Forum without success (though most are pretty old...). Fortunately, iTunes works on my other computers, but I have iPad backups on this one that I'd like to keep. Anybody else with this issue??
My inclination is that it is something in the projects or in the manuals being linked that is the culprit because that is where the consistency lies - projects were created identically and manuals all follow identical formats. The problem typically only occurs after the project has been successfully created and the manual is subsequently updated and I am syncing the manual in RH so I can generate a new AIR file. This is the first time the project has consistently corrupted every time I try to generate the Word document after linking it in RH. This makes little sense to me since it generated fine a couple weeks ago and I did nothing special when I updated it in Word yet when I tried to update it in RH, that is when it originally corrupted. The bottom line is that I cannot 100% trust that any project I run will work the next time. I end up just crossing my fingers and hoping for the best.
My problems seemed to start once I went to RH9 (from RH8) because we had upgraded from MS Office 2003 to the 2010 version and I needed 9 for the docx extension. Like I said, it is not all the time - I can be beating my head against the wall getting one of the projects to work, then create 3 more projects that have no problems and then the next one leaves me wanting to throw my PC through a window....
Deleting the CPD does not corrupt the project, it just removes my default linked document that allows me to circumvent linking the styles individually for that project. Once I have a manual linked and I remove the CPD, it just creates a new one. What I am saying is that if I delete the CPD file, it does not prevent the project from corrupting nor does it make the corrupted project viable again.
thanks!
Kathi -
Getting itunes has stopped working message after downloading to Windows 8.1
Getting ITunes has stopped working message after 10 seconds after downloading to Windows 8.1
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
You could also try working through
TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
tt2 -
ITunes has stopped working message after having it open for one minute.
It's fully updated to iOS 5 and was working fine until now. Running on Windows 7 and worked flawlessly till this point. Any tips? I already uninstalled and reinstalled. Only security software I run is Microdoft Security Essesntials and that has never been an issue. At a loss here.
iTunes has stopped working message after having it open for one minute.
I open itunes and a message comes up after a minute "itunes has stopped working". I got the update automatically to my Windows 7 64 bit pc 10.5.0.142. After reading tons of probelms online about version 10.5
I have decided to do nothing for now. Seems people are putting hours into trying to fix it. I was going to uninstall and reinstall but seems that isn;t working for to many people.
How do we get some help from apple?
Anyone have any answers??? APPLE HELP please!!!!!!!!!!!!!!! -
I accepted a version update and now iTunes closes on launch with the message "iTunes has stopped working. Windows will close the program and notify you if a solution is available." What to do?
Hey Todd Rubenson,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows unexpectedly quitting. The following resource may provide a solution:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M. -
One solution for 'iTunes has stopped working' message
This worked in my case for iTunes 10.5 on a Dell Inspiron 1525 running 32-bit Vista. Symptoms started after I had to re-install it. Suddenly, whenever I tried to dl anything from the store, the dl would hit 100%, then I'd get the error message and DEP would then shut down the program. Upon re-starting, the dl wouldn't be in my apps list. (However, the actual dl WAS in my iTunes folder -- it's just that iTunes couldn't 'see' it.)
I followed all all -- and I mean ALL -- the Apple guides over the course of 2 days with no success, even after numerous re-installs. Also tried every obsure suggestion I came across in the forums here -- and there were a lot!
What finally worked for me were the suggestions at this link:
http://www.vistax64.com/tutorials/87249-unable-install-latest-version-program-vi sta.html
Following the suggestions there, I discovered uninstalled 'debris' residing in the App Data\Local and App Data\Roaming folders, specifically two Apple folders with content. I manually deleted these. These locations aren't mentioned in the Apple guide to manually uninstalling your iTunes. (http://support.apple.com/kb/ht1923)
I also discovered debris throughout the registry which I removed manually with regedit. (Make backups of your registry before you go rummaging around in there! The usual warnings apply...)
I also found two Quicktime files residing in the main Windows directory. (Ver 10.5 no longer installs Quicktime and I had un-installed my previous versions) I don't think these made a difference but 'off with their heads' anyway. (^-~)
BTW, all of this occurs after I used Revo Uninstaller in moderate mode. So even it didn't catch all the leftover debris. (I'm not brave enough to try it on a more aggressive setting...)
Thought I pass this on in hopes it saves someone some grief....iTunes has stopped working message after having it open for one minute.
I open itunes and a message comes up after a minute "itunes has stopped working". I got the update automatically to my Windows 7 64 bit pc 10.5.0.142. After reading tons of probelms online about version 10.5
I have decided to do nothing for now. Seems people are putting hours into trying to fix it. I was going to uninstall and reinstall but seems that isn;t working for to many people.
How do we get some help from apple?
Anyone have any answers??? APPLE HELP please!!!!!!!!!!!!!!! -
"itunes has stopped working" message when syching iphone
Need help..
Ever since I installed the update for the apple software on my PC, when I try to sync my iphone 4 on the last step of synching I get a window popping up saying that "itunes has stopped working". Then I get prompted to close the programme.
I run Windows 7, and cannot understand why it does this.
If anyone can help, I would greatly appreciate it.Not sure what you've seen/tried so far, so I'll run you through my standard advice as of this morning, Marty.
There's a bug with 10.1.0.54, Amanda, that is causing "iTunes has stopped working messages" (citing CoreAudioToolbox.dll in the Problem Reports for the error) for some folks when importing CDs with the AAC encoding, adding/converting files to AAC, and in some cases syncing devices (when the convert to 128 kbps AAC option is enabled).
Short of rolling back your iTunes to 10.0.1.22 and your Apple Application Support to 1.3.2 (CoreAudioToolbox.dll is kept in the Apple Application Support program files), there's a few possible workarounds.
(1) Change your importing prefs to use a different encoding (won't help with the device syncing variation though), and/or disable the convert to 128 kbps AAC when syncing option.
(2) Replace your CoreAudioToolbox.dll version 7.9.4.0 with a 7.9.3.0 as per:
http://discussions.apple.com/thread.jspa?messageID=12576816#12576816
(3) Or, replace your CoreAudioToolbox.dll version 7.9.4.0 with a shadow copy of a 7.9.3.0 as per:
http://discussions.apple.com/thread.jspa?messageID=12583499�
(3 and 4 do help with the device-syncing variation.) -
Hai, i tried to open itunes on my windows 8 laptop but it comes out with 'iTunes has stop working' notification and need to close the program everytime i try to load it. Please help! thanks.
Hi ajay-9,
Thanks for visiting Apple Support Communities.
The steps in this article can help if iTunes is quitting unexpectedly on your PC:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Cheers,
Jeremy
Maybe you are looking for
-
.ics file not opening in iCal and entourgae
Hi, this is the format of my .ics file, When i open it it gives the error 'iCal can't read this calendar file. No events saves to the calendar' This is the firs time i am trying to open the calendar attachment sent via an email. Its not opening in en
-
Deletion of Business Partner from tcode "BP"
Hi! I set up ChaRM functionality and have the problem that for one existing Business Partner from tcode "BP" the error message comes up: The current business partner does not have a vald assignment to change Request Manager or Organization. Therefore
-
I was on facebook accepting gifts from farmville ,when I got a resnd window from firefox ,which I clicked on ..then everything,all posts disappeared....and I can't get it back,signed off back on...refreshed...did a cleanup on my computer ...still not
-
Is there anyway to get the user id and put that on the top of a report? TIA, Jason. null
-
TS4337 My default time entry in my iCal is very annoying.. cant reset to 1hr default entries - how?
Besides the "All Day" default, there is a "Start/End Date" issue. When I enter a new event, the "End Date" jumps ahead to the next day. Even when I am just entering hour-long events/meetings where the start and end dates should be the same. I have ha