After updating Itunes to 11.0.4.4 my sync will not work as it says there is insufficient space when nothing else changed?

I recently updated my iTunes to 11.0.4.4.  After doing this, my ipod touch 4Gen will no longer sync as it gives me a statement about the system not having enough memory left to sync ["The iPod...cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional 2.73GB required)"].  It has 7.96 GB free on a 32GB iPod.  It synced just fine prior to the update and I did not add more than 7.96 GB of files to the library after updating iTunes.  Please Help!  This is a fustrating situation where I can not sync my music, or anything else for that matter, with this issue.  Thanks in advance for all your help.

Illaas,
I tried the manual method.  I was able to set the music/video to manual and then restarted the entire system.  After restart, I re-attached the ipod touch to the computer.  The sync automatically ran for everything that wasn't set to manual and it completed without a problem.  I then reset the music/video to automatically sync and restarted the entire coputer/ipod set again.  This time when I re-attached the ipod, EVERYTHING synced and there were no problems reported.  I've never had to do this before, but I will keep it in mind if something like this happens again.  Thank you for pointing me to the manual sync.

Similar Messages

  • I upgraded IPad to IOS7.0.4 and Itunes to 11.1.3.8, now sync will not work

    I upgraded all 5 of our IPad Minis to IOS 7.0.4 and the Ituens to 11.1.3.8 and now I am unable to sync any movies, TV Shows, or Music to any of the devices.  Itunes says its updated and that they are synced, but when I try to go to them on the pad, there is only the ICloud version available for those I have purchased through ITunes.
    I am not even able to "Share" My Itunes Library through the WiFi in the house.  The only thing that is working is my AppleTV.
    I have tried rebooting PC.  I have rebooted IPad's.  I have restarted ITunes.  I have verified access and restrictions.  Nothing works.
    The only thing that I have not tried is resetting the Pads.  But I will say if I have to reset 5 IPads, 2 IPhones, 3 IPods and 2 AppleTV's every time an update is issued, I can tell you, I will seriously consider moving to another platform.  I moved to apple for the theory of simplicity, they are almost as bad as Microsoft at this point.
    Does anyone have any ideas?

    Finally, here is what I will have to do with 4 more IPad's, 3 IPods and I am not even updating the phones.
    I had to connect the Pad to ITunes and let it do its thing.  Because of whatever the error is, it take upto 20 minutes for it to finally get all the steps completed.  I then have to go into the Summary section and tell it under the IPad Mini Section (NOT the BACKUP section) and tell it to do a Restore.  I then have to wait for it to take over 30 minutes for it to kill the current setup and reboot.  Once it finally reboots I have to go into setup and tell it to setup as an already known Pad configuration.  This helps, but then I have to wait another 20 minutes till however long for it to install the media that it shows as part of the install.  The reason I say however long is because if I only had about 5 Gig of media on there at the time.  If I had it anywhere near full it would take much longer.
    Then, at that point I can finally make changes to the media.
    I also verified something else.  The only other thing that they all had in common was they were all trying to download a movie I recently purchased.  It was fairly large so I wondered if size was an issue or if maybe it was corrupted.  I deleted it from ITunes and the CPU.  Still had the problem.
    This is the third update from apple I have had to do this.  It is getting very old.  I left the MS platform for the same reason.  I dont have the time to spend fixing crap that Apple "Genious'" get paid to supposedly fix. 
    I appreciate the sugestion on the Hard Boot Process.  I will try that sooner next time, but I am a bit frustrated with Apple at this point.  Its no wonder they are loosing market shares.

  • After updating itunes software, i was charging my ipod nano (older version) and now it says it is disrupted and won't come on

    After updating itunes software, i was charging my ipod nano (older version) and now it says it is disrupted and won't come on

    Hi, Jennifer. 
    First, try resetting the device.  The first article will walk you through this process.  I am unsure which iPod nano you have so I will include the basic article.  From there, select your version for troubleshooting steps. 
    How to reset iPod
    http://support.apple.com/kb/HT1320
    iPod Troubleshooting Assistants
    http://www.apple.com/support/ipod/five_rs/
    Hope that helps,
    Jason H. 

  • TS1591 After updating Itune to 11.1.4, my ipHone 4 is not recognized on my Mac 10.9.1

    Please help.
    After updating Itune to 11.1.4, my ipHone 4 is not recognized on my Mac 10.9.1
    I can't connect to sync to my ipHone or even download photos via cable

    Hello jml009,
    The following article can help get your iPhone to appear in iTunes again.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

  • I updated itunes to version 11.0 and now it will not open and says it is corrupted?

    i updated itunes to version 11.0 and now it will not open and says it is corrupted?
    how do i get it to work it updated fine then asked to restart comp so i did now it will not open

    Let's try a repair install of iTunes first.
    Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
    Can you launch your iTunes now?

  • After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home. I have restared the phone and toggled the router, still no connection

    After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home (this is the network I used to update the phone). My iPad however does not seem to have any problem connecting. I have restared the phone, toggled the router, re-entered the network password but there's still no connection.

    When your device is trying to connect to the work Wi-Fi network, go to Settings > Wi-Fi > then tap on the name of the Netowrk that she is having trouble with. Then tap on forget this network. Let the device attempt to connect again and make absolutely sure she is trying to connect to the work network and not a nearby network, then make absolutely sure the password is entered correctly.

  • I updated to java 7 and now my yahoo games will not work, how do i fix this?

    i updated to java 7 and now my yahoo games will not work, how do I fix this?

    kathieaross,
    click on the Java pane in System Preferences. When the Java Control Panel window opens, click on the Security tab, and set your Security Level to Medium — that will allow “untrusted” applications (i.e. those without certificates from a trusted authority) to run. Press the Apply button in the lower-right corner to confirm the change, then press the OK button to close the window.
    Apparently your Yahoo! card games don’t have certificates associated with them, which is why the default security setting of Java SE 7 Update 51 didn’t allow them to run.

  • After upgrading to OS 10.8, my Mac App Store is not working. It says: Cannot Connect To The App Store

    After upgrading to OS 10.8, my Mac App Store is not working. It says: Cannot Connect To The App Store. Kindly Help

    Also having that problem - I checked and I am connected to internet (can access other websites or other pages in Apple's website), can login from Snow Leopard (10.6.8) with Mac App Store there, but if I use the (external) drive with ML to start up, no go.
    I can get to the "Featured"/initial MAS page, and tried going to the login from there, but same problem as Mitoshacer.
    In my case, MacBook Pro (2.66GHz, 8GB RAM, 500GB external with ML - vs. 320GB internal drive with 10.6.8), March/April 2009 model. Have done searches for the problem online, but nothing shows up (except some for older OS X versions).

  • ICloud Drive will not work on my iPad 3. Pages crashes when I try. Setting resets to off after it crashes. any suggestions?

    iCloud Drive will not work on my iPad 3. Pages crashes when I try. Settings resets to off after it crashes. any suggestions?

    From the Ipad manual - actually the same in Ipad, Ipod, Iphone --- the support site listed has frequently asked questions on Icloud drive.
    Set up iCloud Drive
    You can set up iCloud Drive using Setup Assistant when you install iOS 8, or you can set it up later in Settings. iCloud Drive is an upgrade to Documents & Data. When you upgrade to iCloud Drive, your documents are copied to iCloud Drive and become available on your devices using iCloud Drive. You won’t be able to access the documents stored in iCloud Drive on your other devices until they are also upgraded to iOS 8 or OS X Yosemite. For more information about upgrading to iCloud Drive, see support.apple.com/kb/HT6345.
    Set up iCloud Drive. Go to Settings > iCloud > iCloud Drive, turn on iCloud Drive, then follow the onscreen instructions.

  • I just updated to OS X Mountain Lion and now Word will not work?

    I just updated to OS X Mountain Lion and now Word will not work?
    Word, Powerpoint, Excel - none of them work. . . . Any ideas?

    You can also try Pages for Word / Numbers for Excel. Both can import/export Word and Excel files.

  • HT201210 been trying to restore ipod touch for days after updating itunes. keep getting error #9. Tried it on 2 computers, with vista + XP. tried all the solutions posted. nothing is working. Thanks Apple. Didn't have this problem before updating itunes!

    Been trying to restore Ipod touch for days after updating Itunes. Error code #9. Stuck on restore screen. Tried all the solutions posted. Tried on 2 computers, Vista + XP. No device shown on computer. Thanks Apple! Didn't have this problem before update. How about rolling back your update?

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

  • After updating my wife's iPad to iOS6 the ipad will not connect to wifi on certain wireless routers. What can we do? Also, same for iPad mini with same router. But iPhone that has iOS5 has no problem connecting.

    Need help. Before updating to latest software iOS6 the iPad had no issues connecting on our home router. After updating the iPad will not work. We have a mini iPad with same issue. But I have a iPhone 4S that I chose not to update to iOS6, still has iOS5. It connects no problem to router. Our computers have no issues connecting to router either. There is a software issue with iOS6.0.1 that will not allow certain routers to communicate. What can I do?  Also, the mini iPad stated a newer version of software is out, version 6.0.2 which is supposed to correct the wifi problems. It has helped but still haven't connectivity issues. However, the iPad states software is up-to-date so we cannot update to 6.0.2 even through connecting to computer on iTunes. How can that be?

    Try going to settings, reset , reset network settings.

  • After updating to iOS 8.2 voice recognition in WhatsApp does not work properly anymore. Does anybody have a solution?

    After updating to iOS 8.2 voice recognition in WhatsApp has stopped working properly. I can only dictate three or four words. I have already tried rebooting the system twice.

    same issue ..
    been around sine release of 8.2

  • After I updated to 6OS from 4Os, some of my email will not open...says I am not connected to the Internet?  HUH???

    After I updated my 4OS to 6 OS, some of my email will not open as it says I am not connected to the Internet.  This is a first...HUH?

    Try connecting the two computers together and dragging the iPhoto library dorm the pictures folder to the desktop then dragging the iPhoto library from the old computer to the pictures folder of the new and launching iPhoto. That should work and if rpeverything is good trash the iPhoto library on the desktop
    LN

  • I updated my software for the Time Machine and it will not work properly now.

    I updated my Time Machine's Software and now it flashes amber all of the time and will not let me "into" it. I used to have a wireless network through it and now it does not work. I have hard reset it several times and it is flashing amber again.

    I have done this on several occassions. This works for 1 time then it stops. It "connects" allows me to set it up and then flashes amber. It did backup 1 time today, but now it says it is delayed and there is no back up. It worked fine until I updated the software and tried to extend my network. After this, it will NOT work at all, for any length of time. i just reset it, and was able to set it up, but it gave me an error message, is flashing amber and is not being recognized. Very frustrating.
    Message was edited by: StephHouse

Maybe you are looking for

  • Tracking number of JSPs a user visits in a session

    Hi everyone: My coworkers and I need to track the number of pages a user visits while visiting our site. We set a cookie in the login servlet. If they're not logged in and they visit 5 pages, we want to redirect their request for a 6th JSP to "please

  • Web Delivered Extensionless PDF

    I have been testing a new internal web portal which will give employees access to a large database of PDF documents.  This portral appears to deliver all PDFs with a generic filename "FILE0" and with no extension.  When we access the portal with Inte

  • Prevent Manual URL

    Hi, I am using JDeveloper 11.1.1.2 with ADF BC and ADF Faces. I have an unbounded task flow with several views including a welcome page. Currently, a user can manually enter a URL to take them to any one of the views. I would now like to redirect the

  • Cannot attach User property set within a Rule set

    Hi, I cannot attach a user property set within a rule set. When i create a new rule set in the tools it doesnt give me a field to attach a User property set to a rule set. I dont get this. I am using WLCS 3.2, cloudscape, WL 5.1 SP 6, Win2000. Any he

  • What is the upgrade to 10.9 method?

    So I am running 10.8.5 Server now, or listed as OS X Server 2.2.2.  What is the recommended upgrade method to get to OS X Server 3 (Mavericks)? It is not very clear, and I don't want to start from scratch or lose my current working configuraton. Sinc