After updating iTunes windows says problem exists and closes program
I installed the new update 11.2 etc and now when I open iTunes a windows box pops upand says there is a problem and closes the
program. Now I can't even get to any of my music. I am afraid to uninstall and re-install because I am not technically saavy. I did
go to the Programs listing and hit Repair and even after that it won't work. What a mess. I haven't been able to use the Burn Disc
for quite a while now. Should I just take my computer in for repair? PLEEEEEZE ANSWER.
Hello, rachel a.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting articles that I would recommend going through.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
iTunes for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Cheers,
Jason H.
Similar Messages
-
After installing itunes Windows 7 doesnt boot and stalls while loading atipcie.sys driver
After installing itunes my computer stalls when loading atipcie.sys driver. Computer will not boot up in safe mode or Last known good. Only resolution was to perform System Restore to a time before itunes was installed, thus deleting the itunes installation
Anyone know of a fix or workaround for this issue ?Windows 7 64 bit core i7
BSOD while updating to iTunes 10 with suspended installation of Apple Mobile Device Support. Network drivers no longer working as a result. Attempted fix by downloading from a different machine and competing install via files transferred over on flash drive. No dice. Attempted removal of iTunes, QuickTime, Apple Mobile Device Support, Apple Application Support, Apple Software Update to see if this would fix. Followed this up with a restart. This seems to have improved matters as system is starting up faster. No dice. Try reinstall network drivers from Sony ViaoCare disk. Installed and restarted. No dice. Next, try Widows 7 Network and Sharing diagnostics. No dice. Next try manual removal & reinstall of network driver using Device Manager, restart. Can't seem to re-install Network Controller. Still trying to solve this. -
TS2771 After updating my software my apps open and close immediately when selected
After updating my ipod software my apps open and close immediately when selected.
See:
iOS: Troubleshooting applications purchased from the App Store
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
HDCP Error after update Itunes 12.1.2.27 and Yosemite 10.10.3
I recently updated my iTunes to 12.1.2.27 and OS Yosemite to 10.10.3 on my Mac Pro and now I have HDCP errors when watching my downloaded movies with my Mac display.
Does anyone have a solution for this problem?
Thanks.I have the same problem. any help from any one please? thank you
-
After update iTunes still says I need to update
when I try to access iTunes it tells me I need to update my device. It gives me step by step. It then says it is up to date. But i still can't access itunes. It gives me the same message "Need tp update device". Don't know what else to do other than follow the directions. I have even rebooted my iPhone. No luck. Any suggestions?
thanks,
BryanWhen I click on "New music" from itunes in my email Safari opens and says
" You neede to update your device's software to access the itunes store."
It continues with these directions that I have followed.
"Simply sync your device to your computer and click " Check for update" and then click this itunes store link again from your device when syncing is complete."
Thanks for the phone # I may give that a try next.
Bryan -
I update my iPhone in iTunes, and after some time, opened a window saying "rosolvendor conflict" and asking me to choose, giving me two options, showing the name of a friend who also has an iPhone.
Can anyone help me?Dear Tim,
I saw your message. Below are the problems:
Whenever I connect my iphone 3GS to my PC through a USB. My itunes software comes up automatically.
1. After that a message appears from the itunes that states that 'itunes could not connect to the itunes store, an unknown error cccured (306).
2. After the above, an alert message comes up which states that A new iphone software version 5.1 is availlable for my iphone. It then states would you like to download it and update your iphone now? With the options buttons as Cancel or Download and Update or Download Only. Whenever I clicked on Download and Update or Download Only, the next message that comes up is that The iphone Software Update Server Could not be Contacted and suggest make sure your network setting are correct and active or try again later.
The above is the challenges I am facing now. -
After update, Itunes can't load. I get error message R6034, attempt to load the C runtime library incorrectly.
I also get error code 7 (Windows error 1114), saying itunes wasn't installed correctly. It appears that I am not the only one with this issue. what is wrong with the latest update?? I tried removing Itunes and all of its components and installing it again, but get same errors and i have also tried doing a system restore with the same resultsDoublechecking. Have you also tried the following user tip?
Troubleshooting issues with iTunes for Windows updates -
So I updated my computer to 8.1 I don't know if I synced my ipod after that, but I know immediately after updating iTunes, I began to receive an error message saying iTunes recognizes that I connected an iPod, but can't identify properly.
I've tried uninstalling and reinstalling as well as restarting the computer, trying different USB ports. it works when I connect it to other computers.Hi HIJKay,
Thanks for using Apple Support Communities. This article has some steps you can take if iTunes isn't correctly recognizing your iPod:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
Cheers,
- Ari -
After updating iTunes to 11.0.1.12 and updating Apple TV to 5.1.1 my Apple TV is no longer picking up my photo library. It just keeps saying "loading library" but never brings the pictures up. It also tells me that home sharing isn't on even though it is and then I have to turn it off and on on the PC so the Apple TV even recognizes the photo library. These issues didn't happen with previous versions. Any ideas?
Update on my previous comment. I have solved my issue. Issue was with Windows 7 firewall not operating correctly. I was unable to add itunes to the 'Allow programs to communicate through windows firewall'. Found the following page useful http://answers.microsoft.com/en-us/windows/forum/windows_7-security/windows-fire wall-cant-change-some-of-your-settings/514d78fb-39e9-47b1-b561-bc49cbdad904
Followed the instructions to the foot of the page, restarted PC, normal service resumed on windows firewall, added itunes to list to communicate through firewall. restarted itunes, restarted appletv, success!!!
Hope this may help somone else. -
I updated iTunes 10.3.1 today, and now it won't let me openitunes it keeps saying error 7 (windows error 14001) and also says (apple mobile failed to startverify significant privileges to start system services) I have unstalled it severaltimes, tried repairing it also switched off all security software and checkedall files are deleted in local disk (program file) but still no look. Please cansomeone help
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
Regarding AMDS failures there is a hint in another thread that disabling the Windows Firewall before attempting to reinstall may help, otherwise take a look at the steps outlined in this post. Re: Can't install iTunes 12.1 on Windows 7 64-bit. I know they look a little daunting, but the process of generating the logs themselves isn't that hard to do. Extracting useful information from them is still a challenge but maybe something will leap out. If you want to post the log for the failed components for me to have a look at here or in the other thread please edit out any personal information, particularly your email address, first.
tt2 -
I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.
I have tried everything and nothing works.sound problems:
#Restore speaker icon to System Task bar, right-click on clock or tray > Properties > Volume: On
#Click on the Sound icon in System tray then on Mixer, make sure Firefox is not muted [http://dmcritchie.mvps.org/icons/fx_sound.png picture]
<p>Additional references
* [https://support.mozilla.com/en-US/kb/No%20sound%20in%20Firefox No sound in Firefox | Troubleshooting | Firefox Help]
* [http://support.mozilla.com/en-US/kb/Video%20or%20audio%20does%20not%20play Video or audio does not play | Troubleshooting | Firefox Help]
* [http://kb.mozillazine.org/Video_or_audio_does_not_play Video or audio does not play - MozillaZine Knowledge Base] -
My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possibleMy itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible -
After updating itunes 10.4 when editing tags in file adds two or three covers. This problem is represented as in 10.6.8 and in 10.7.
Earlier albums were edited with the same cover.
or 3I think I have the answer.
I was experiencing the exact same problem. I tried lots of different things but what I think works is to exclude your iTunes folder from Spotlight. Open the System Preference for Spotlight, click on the Privacy tab, and then drag your iTunes folder (in your user/Music folder) into that window pane. In fact, I think it is faster when I am fixing tags!
Let me know if it works for you too.
Scott -
I updated iTunes to 10.4 version and now it doesn't start and send a messages "iTunes has detected an error and must be closed". Someone have the same problem and how can we repair our installation insted of change the windows XP installation? Best regards
Only way to get iMac starting again was to re-install 10.4.4 from DVD, and then update it into 10.4.6. For a while it worked perfectly, just as before.
Then I tried to print to CD with my EPSON Stylus Photo 950 from Adobe Photoshop Elements (2.0). It didn't print anything, but printer started flashing all lights. The print job was not performed, so I did remove it from the Printer Utility. After that the iMac started "ticking" again, same noise than before, after 10.4.7 installation. I did re-boot iMac. It never started, it does stuck on gray screen (gray block running clockwise). HW test from DVD didn't find any problems (extended search looping 3 times). But Disk Utility found hard drive to have inaccurate node structure, it could not fix it.
Apple support recommended to use DiskWarrior. However, it does not support (yet) Intel Macs. I haven't got TechTool Pro 4.5.1 anywhere. iMac does start on to FireWire mode (T at boot), but I cannot see the disk from 10.2.8 iMac.
So, obvisously the problem is not 10.4.7. I believe it to be ESPON printer driver compatibility on Mac OSX. This does not suprise me, EPSON printers *****, I shall never purchase one again. However, disk catalog structure should not get messed by one faulty printer driver! -
After updating itunes three (3) days ago - itunes close shortly after starting with the message "a problem occured and cannot be solved, please close application" - Platform: WIN7 - iTunes 11.2.9.115
Start with the third box in Troubleshooting issues with iTunes for Windows updates.
If that doesn't work, use the steps in the second box to repair your iTunes installation. Your library should be unaffected by these steps but there is backup advice elsewhere in the user tip.
tt2
Maybe you are looking for
-
PropertyInfo does not contain a definition for 'GetCustomAttribute' ?
Hello, I inherited a .Net 4 Asp.net web application . I did a build and got the error below. According to MSDN, PropertyInfo doesn't have a GetCustomAttribute method. (It does have a GetCustomAttributes method). Am I missing a extension method? Or us
-
My MacBook Pro 13 inch seems to be crashing more and more often. In this case I was watching a youtube video, something I don't do often, and BAM! crashed, no warning, no slowing, no nothing, just rebooted on its owm. Any ideas/help/etc would be mu
-
Hi, I am using 10g and wanted to check if we can use a dynamic cursor in a procedure. Following is my code and wanted to see if that can work with every query passed as a parameter. example , exec test1 ('select col1, col2, col3 from table1','Two col
-
Printing causes internet to temporarily disconnect.
Printer: HP Laserjet 3600n My printer is connected to my router via an Ethernet cable. Every time a computer it our network prints something on this printer, the internet is temporarily cut. The computers don't show that they are disconnected from th
-
Incorrect ouput of "groups" command
I setup iDS 5.1 server on Solaris 9 and client on Solaris8. I created one account (user1) and add it on 2 groups, but I could not get right output by running "groups" command, it only was displayed that this account just exist on one group (primary g