After updating my 5S to ios 8.1.2 sync calendar to outlook no longer works
After updating my 5S to ios 8.1.2 sync calendar to outlook no longer works, using iTunes 12.0.1.26.
It will sync from Outlook to the phone, but not from the phone to Outlook. This was working last week with the last version of iTunes and ios 8.1.1
Hello MEOS001,
If you are not seeing any changes being made over to your iPhone and vice versa to your computer, take a look a the article below. It will walk you through resetting the SyncServices Folder as well the Sync history. It may also be an issue with any plug ins that Outlook may have installed that may be preventing the sync.
Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
http://support.apple.com/en-us/HT203300
Take care,
-Norm G.
Similar Messages
-
after updating my iphone 4 to the 4.3.5 ver volume button no longer works which means no sound on anything other then the ipod
no app sounds work and no sound when phone calls and texts are recieved..Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David -
After updating to snow leopard and trying to delete mackeeper, Flash player is being blocked and will not allow me to view utubes. Can anyone help?
Here are instructions for eradicating MacKeeper - you may need to re-install it to uninstall it fully:
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
Regarding Flash - there are many reports on here that v13.x isn't working for a lot of people. distractme in the following thread posted instructions on how to install the previous version, which should work whilst Adobe work on a fix:
https://discussions.apple.com/message/25430408#25430408 -
After updating my phone to iOS 7.0.2 it won't let me onto iTunes!
After updating my phone to iOS 7.0.2 it won't let me on my iTunes! I've logged out and back in, turned it off. Nothing works
Hey,
I assume you already plugged it into iTunes and tried to restore it? When it is in Recovery mode, the only thing you can do is restore it. You want to make sure that you back the iPad up on a regular basis. -
After updating my Ipod with IOS 5, some of my music no longer plays. Album cover is shown, but the IPod skips to the next song. Any ideas why?
A not uncommon problem. See this previous discussion.
Problems with IOS 5 Music App (Updated) -
After updating my ipad to iOS 7.0.3 the group pages in my facebook do not open. Can you help
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers, Tom -
After updating my 5s to ios 8.0.2 , my touchscreen doesen't work
After updating my 5s to ios 8.0.2 , my touchscreen doesen't work when i have an incoming call , and i deny it by pushing the power button twice. When i try to use the phone the screen is not working at all , altough touch id sensor w/ home button work , and power buttton works. I must unlock via touchid , lock the phone, and then it will work again.
Hi Corcio92,
If you are having a reproduceable issue with your iPhone's touchscreen such as you describe - that is it stops functioning only after a particular sequence of steps, you may want to try some things to troubleshoot.
First I would suggest updating your iPhone's operating system to version 8.1. For directions see this article -
Update the iOS software on your iPhone, iPad, and iPod touch
If the issue is still present, you may want to restore the iPhone as a new device -
iOS: How to back up your data and set up your device as a new device
Thanks for using Apple Support Communities.
Best,
Brett L -
After updating to the latest IOS 8 on my ipad / iphone etc I do not have any documents on pages, keynotes etc. I have them on my iphone 5S and I can log in on my pc and see al the documents. I have icloud turned on and idrive.
If I start a new document in pages and then try to share this document with the top ring link in pages "share Link via iCloud" a screen notification tells me to "Set Up iCloud. Go to Settings and select iCloud. Sign in and turn on iCloud Drive for Page".
When I go to settings I see that I am signed in.
Please help as I need the documents back on my ipad.Did you have iCloud photo stream turned on for photos? If you did, then you can view your photos at iCloud.com. If you can verify that they are all there, you can do the factory reset. Once you turn on iCloud again after the reset, the photos won't be on the phone but they will still be in the photo stream which you can view on the device. You should be able to copy the photos down to the computer from iCloud. On an Apple Mac computer, iPhoto can view photo stream and you can download photos there too.
Personally, with syncing issues with iTunes, I prefer to use an app called PhotoSync (which is an app in the App Store, Mac App Store, and available from the developer's website for Windows PC's. This App (once turned on for both devices) lets you send photos back and forth within wifi. -
what cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?
SSince Apple does not support downgrading the iOS I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.
-
I am having problem with iMessage after updating my 5s to iOS 8.0.2
I am having problem with iMessage after updating my 5s to iOS 8.0.2. I cannot send any text by iMessage anymore. My friend tries to text me and it did not go through
Hello Huyen,
Thank you for using Apple Support Communities.
You can use the following article to troubleshoot Messages:
iOS: Troubleshooting Messages
Regards,
Jeff D. -
After update my iPhone 4 iOS to 5.0.1 the. Bettery gone so bad. Every 1% goes every minute while browsing. Also system is very slow and 3G. Connectivity gone very poor. I want to go back to ios 4.3.4 until these problem are resolved. Please help.
Just look around the forum posts. Your issue is the number one problem reported by users. There are many suggestions found, some work for some users, others do not.
Some users have reported no battery problems after the upgrade. Others have improved performance after upgrading to 5.0.1 from 5.0. YMMV.
Many of the posts offer suggestions about changing various settings - there are many that affect the battery life.
Once you upgrade the iOS on a device, you cannot go back to a previous version. -
After updates to newer vision iOS 7.0.4 my iPhone 4 is become slow, so please tell me what to do.
There was something you could have done, bought extended warrenty, would have covered this. Apple is outside of it's one year warrenty policy, they had the agreement, and when you update you also sign an agreement that you would be responsiable for any problems that occur.
The best thing you can do is the Out of warrenty for 199$; you didn't get additional coverage; something bad happen, be glad they offer the OOW. -
"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error
"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error
-
After updating my 4S to iOS 5.1.1 last night, none of my data applications are working today, nor Siri, iMessage or anything of the like. I'm at a loss as to what might have caused it. Is anyone else having this issue/has anyone found a fix? Everything seems to work fine if I connect to wireless, but if I'm not connected to it then nothing is working. My service provider says everything should be working fine, I still have the 3G symbol and full bars.
Somebody clearly hasn't read the User Guide.
Basic troubleshooting steps are retart, reset, restore from backup, restore as NEW.
If you have tried ALL of these steps and you're still having problems, then you need to bring your phone into Apple for evaluation. -
Has anybody experienced missing sent emails after updating their iPhone to IOS 5.0? Mail composed on phone appears to send but is never delivered nor does it show in sent items. Using Exchange 2010. Any thoughts??
@Satterp
Not sure if you were responding to me or OP - my iPhone is on 5.1. The OP at the time of writing was on 5.0.1.
Also, the OP and I had setup our Hotmail as an Exchange server (similar to IMAP), not POP3.
Maybe you are looking for
-
I have a flow controller linked to fieldpoint that is tripping my alarm system (in Bridgeview) every time it reads a quick voltage difference. This occurs only for an instance, but it is enough to trip my alarms. I wanted to place in a 1 or 2 second
-
Problem in calling oracle procedure from java
Oracle procedure with the following parameters. CREATE OR REPLACE PROCEDURE CREDITED_TO_STORE_INSERT (P_CUST# IN NUMBER, P_INV_DATE IN DATE, P_MEMO# IN NUMBER, P_SESS_ID IN VARCHAR2 ) IS BEGIN /*.........Procedure Body with select and insert statemen
-
OSS Note for MIGO "Update terminate (SAPSQL_ARRAY_INSERT_DUPREC)"
Dear all I am facing problem during MIGO GR reference Others, MVT 561. Upon clicing Button: Save, I face 2 types of errors intermittently 1. Material document is saved and generated but when comes to displayed, it will say "Document 4900496xxx does n
-
How to sync a subset of Address Book contacts only
Is anyone able to tell me how to achieve a complete two-way syncing between my phone contacts and a group (subset) of contacts in my Mac's Address Book?! I have in my computer's address book two sets of contacts: 1) contacts I want to be mirrored in
-
Object to change the SCMA maintenance cycle phase in CHARM
Hi Everyone, Can anyone let me know what is the Object which can perform the activity of changing the Maintenance cycle phase in SCMA Tcode in CHARM? i know only the change manager will have authorization to do that. i want to know the Role name and