After updating my iPad using iTunes none of my game apps will open

What can I do to get them back?

See Here... in particular #3...
Troubleshooting applications purchased from the App Store

Similar Messages

  • After updating my ipad through i tunes all my games are not opening, After updating my ipad through i tunes all my games are not opening

    After updating my ipad through i tunes all my games are not opening, After updating my ipad through i tunes all my games are not opening

    This seems to be most common with lower resolution pictures.  You can go into settings > general > accessibility and turn reduce motion motion off and then try to rescale.  Or user a higher resolution picture, which works better with the new OS.

  • HT4623 I trying to update my iPad using iTunes. After connecting to MacBook Pro where is installed all latest software iPad is recognised as iPad, Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error

    There was some updayts for my iPad 4 automatically downloaded. After installing it, the iPad began to restart itself every few minutes.
    I tryed to update my iPad using iTunes. After connecting to MacBook Pro, where is installed all latest software, iPad is recognised as "iPad", Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error occured (3). Tried many times, not results. And now iPad stays only in recovery mode, can't switch it off.  How can I solve this problem please?

    When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547

  • After update my iphone using itunes it requesting to put  invalid sim

    after update my iphone using itunes it requesting to put invali sim

    Sounds like your phone was unlocked in an unapproved manor. Updating it locked the phone so now your sim is invalid. You need to figure out what carrier your phone is locked to and se if you can open an account trhough them or see if they can unlock it.

  • Updated the software on my iphone 4 last night and now none of my purchased apps will open. They start to and then immeadiately close.

    Updated the software on my iphone 4 last night and now none of my purchased apps will open. They start to and then immeadiately close.

    Try restoring from a backup. Connect the iPhone to your computer, launch iTunes. Right or control click the iPhone under Devices in the source list then click: Restore from Backup.

  • My iPhone 5s restarts while charging and none of my downloaded apps will open

    MMy iPhone 5s restarts every time I plug it in to charge. And none of my downloaded apps will open except for a few. I've restartedmy phone, deleted the apps then redownloaded them, ive reset my network settings, and even reset all of my settings in general. But nothing will work

    Hello d.ashley.,
    The troubleshooting steps detailed below can help stabilize your iPhone.
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • None of my Cs4 Apps will open !!! ;-( help

    Hi,
    I need help big time ;-(
    None of my apps in cs4 will open. tey just bounce on the dock then close. No error message or anything.
    It was all working fine till about 2 days ago?
    About this Mac
    version 10.6.4
    i dont know what to do, i really dont know much about comps at all ;-/

    Hey,
    I deleted a folder from somewhere - i forgot where and i forgot where i found the answer - sorry. I think it was called the FLEX something Folder.
    I keep searching and let you know when i remember or find it again.
    cheers
    Mary
    Date: Sun, 20 Jun 2010 08:01:11 -0600
    From: [email protected]
    To: [email protected]
    Subject: None of my Cs4 Apps will open !!! ;-( help
    Aha...good going !  glad you got it working...
    What was the solution ?  It might help someone else someday if they have the same sort of problem you had...
    People do "searches" on the forum to find answers to problems...
    Good luck with everything....and now that you got it working dont hesitate to come for help with the program !
    Rod
    >

  • Updated Yosemite and none of my Apple apps will open

    After updating every Apple based app will not open. Safari, App Store, iTunes, and even Terminal. I don't know what do since I can't even open App Store to reinstall anything.

    My second paragraph was supposed to be: I've looked at similar issues people had when upgrading to Lion, but none of the solutions have worked.

  • None of my iWork apps will open.

    I have a 21.5" iMac at work.  It is running Mac OS X Mavericks (10.9.5).  The computer is brand-new; I received it at the beginning of September, and it was purchased specifically for me so it is the latest model iMac.  I use a combination of iCloud and Google Cloud Drive to store the majority of my documents and sync them between home and work.
    Today I tried to open all three iWork applications and none of them would open - or, more accurately, they wouldn't beyond the "new documents" screen.  The same thing happened/happens with all three.  I would go to Launchpad or the applications window and hit the app; I would get the "iCloud for Pages/Numbers/Keynote" screen.  If I hit new document, then I get the template chooser, but when I choose "blank" (or any template - it doesn't matter) and then hit Choose, nothing happens.  I can do this 4-5 times in a row and nothing happens.  If I then switch to use another app, the iWork app will close spontaneously.  The same thing happens if I hit cancel and then try to create a new blank document using the File menu in any iWork app.
    If I try to open an existing iWork file, I get the message "[filename] cannot be opened."  This happens regardless of whether I double-click the file within its folder or whether I try to open it directly from iWork using the menus.  Even if I try to open a Microsoft Word document in Pages by right-clicking and selecting Open in...Pages, I get the same message.  I don't have this problem with any other applications on my computer; when I go to the App Store, the applications show as installed on my computer.

    I am having the same problem with my iWorks apps on my iPad (but not my iPhone). I am hopeful the update to iOS 7.0.3 will fix it. I have been searching this site for solutions but had not found anyone with the same problem until now. Thanks for the second post. It gives me hope!

  • None of my Apple apps will open

    I think I may have screwed some things up when I tried to install Wineskins. I changed a couple of permissions, and now none of my Apple apps (Textedit, Preview, iBooks, Maps, etc...even Terminal) will launch. I've tried to go back and change things back to the way they were, with no luck. They don't launch if I sign in as a guest, or if I create a new user.
    I've looked at similari
    I'd appreciate any help anyone has to give!
    Thanks,
    Steve

    My second paragraph was supposed to be: I've looked at similar issues people had when upgrading to Lion, but none of the solutions have worked.

  • After updating to the latest iTunes, NONE of the movies will play on iPod

    I purchased Night at the Museum Battle for the Smithsonian, and it included a digital copy, which allows for legally downloading to an iPod. I received a message that I could not put it on my iPod unless I had the latest version of iTunes.
    I do not sync my iPod, I always move my files manually; I don't know if this could have anything to do with the problem. However, the movies I had on my iPod that worked previously now do not work. I can see a small graphic in the upper left corner, the title of the movie and hear the soundtrack, but that's it.

    I've figured it out for myself; after upgrading, I can no longer have the TV OUT to the ON setting. I did a little hunting on the internet to get the answer.

  • Installed update for iPad today now can't get my apps to open such as my kindle help

    apps won't open what is the problem?

    If the preinstalled apps work -  like Safari, iTunes or the app store - try downloading any app - a free app. That seems to reset the other apps.

  • Recently purchased macbook pro 15 w/retina display. None of my cs3 apps will open. Get License quit working messge.  How can I get it working?

    I have followed all the steps.  FIrst to delete a "Flex" file.   Wasn't on the hard drive to delete.  Then downloaded License Recovery app from Adobe and launched it.  The dreaded message:
    You can’t open the application “LicenseRecoveryLauncher” because PowerPC applications are no longer supported.
    What to do?  Headed out of the country and can't be Creative Clouding it.

    Try to follow below steps
    Click on Finder and then hold Command + Shift + G keys on your keypad
    It will open Go to folder window, type  exactly ~/Library and click on Go
    Then open Application Support > Adobe folders
    Trash AAMUpdater and OOBE folders.
    Now click on finder and hold Command + Shift + G keys on your keypad.
    This time type /Library and click on Go.
    Make sure to remove ~ symbol.
    Then open Application Support > Adobe folders.
    Trash AAMUpdater, Adobe Application manager, OOBE folders.
    Now Click on Finder and then hold Command + Shift + U keys on your keypad.
    It will open utilities folder.
    Trash Adobe Creative Cloud and Adobe Application Manager folders
    Download and Run CC cleaner tool from below link
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems/_jcr_conte nt/main-pars/accordion_container_1/accordion-par/accordion-item-1/accordion-item-par/proc e dure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleanerTool.zip
    Accept the license agreement and click on Adobe Application Manager
    Then click on clean up selected
    Close the window
    Download and install Creative Cloud App from below link
    Free Creative Cloud | Download Adobe Creative Cloud free trial

  • After updating my iPad to ios7 my kindle cloud reader will not open. I've uninstalled and reinstalled the app and it still won't open.

    After updating my iPad 2 to ios7, my kindle cloud reader will not open. I've uninstalled and reinstalled the app but it still won't open.

    I am experiencing the same thing. My Kindle cloud reader (icon/shortcut placed on my iPad screen) was working fine before I updated to ios7. I can go to Amazon's website and directly log into the cloud reader and it works fine, but when I make a copy/shortcut onto my iPad's screen (from Safari), and try to login, the login screen just sits there doing nothing. I can even put in a false username and password, hit enter, and the login screen just sits there.  Knowing that Apple has made life as difficult as it can for Amazon/Kindle ( demanding outrageous fees for user to purchase books directly through the Kindle app), I wonder if the ios7 was designed to give kindle cloud readers trouble. Note, you could always login to the cloud reader directly from the amazon site, purchase the books, then use the actual kindle reader ( where thanks to Apple you can't purchase books) to read the books.

  • After updating to 6.0, ITunes account linked wrong

    My husband has an Ipad2 issued from his employer.  I have one for personal use.  Each have an Itunes account.  We both updated today to 6.0.  I then went to update my apps and they are now connected with my husbands itune account instead of mine.  Any idea how to fix?

    Did you update your iPads using iTunes?
    You can go to Settings>iTunes and App Store and tap the ID that is showing in there - sign out and then sign in with the correct account

Maybe you are looking for

  • Error message while posting goods issue.

    Hi, Please help me with the following problem.. I have created Sales Order, Delivery & also created the Transfer Order number. After creating Transfer ordering, while submitting post goods issue, when I click on PGI, I get "Posting only available for

  • ALV grid total line customizing

    Dear Masters, I need a solution for my problem. I need to modify sorting of subtotal and grand total based on currency which criteria i create  myself. The standard alv output sort total by currency based on alpahabetical order, e.g: AUD,  EUR, IDR,

  • Multilevel BOM

    Hi  All. We are makinga  Z report in which a part of the information is about the multilevel BOM. Now i need to show all the components in the multilevel BOM along with their BOM levels (something like CS11).Can anyone please suggest the tables for t

  • How to create a background job to replicate the datasource from R3 to BW?

    Dear all I always got error msg when use the RSA1 to do the relicate from R3. Did anybody can tell me how to do it in background? Thank you! Jialin

  • Regarding Email Definition IN OIM

    Hi, During provisioning flow we are creating an email template for sending the mail ,the body contains the following fields ID: Name: Location: NOTES: This "Notes" field has the data which is entered during provisioning flow. All the details other th