After updating my ipad2 to ios6 my favorite chat room is not working. They can see me but I can't see them.

Before I updated everything worked fine.  This is thru safari on the full version of a website.  Now after I enter my chat room and everyone can see me and what I type but I can't see them.  I was on the phone with apple.  1st call, they had me empty cookies and cache, that didn't work. I did a hard reset? held the off button and the round button.  that didn't work, but I was able to see one persons "hi" post.  2nd call they had me do a reset, thru the general in settings(I was also transferred to a supervisor which makes me think that I am the only one with this problem).  I was able to see 5 people say hi, but still unable to see them after the intial. 
I use to see the little pinwheel at the top left hand side next to ipad and the signal strength pinwheel all the time but now I don't see it doing that. While in the chat.
Any ideas.  The supervisor sorta suggested tap-a-talk.  But I didn't want to spend the money if I dont have to and Im not sure it would fix this..
I did notify the website the chat room is thru so they know also, but no answers yet.

Hi
Have you set the Quicktime settings, goto sys prefs/quicktime/streaming/streaming speed set what you get from your ISP go no higher then 1.5mbps(dont use automatic)
In ichats prefs click on video and change bandwidth limit to NONE.
Restart iChat.
Tony

Similar Messages

  • After updating my iPhone to IOS6.1.2, My itunes will not load or sync.  What should I do?

    After updating my iPhone to IOS 6.1.2, phone will not load or sync with itunes.  When syncin it gets stuck on waiting for changes to be applied.  What should I do?

    "What should I do?" -- Just wait a few hours and your battery will drain out.  Then you won't have to worry about loading or syncing tunes.
    Hellooo???  Apple???  Are you out there???  Two months and counting now, and still no fix for the 6.1.2 battery-drain problem.  Hellooooo????

  • After updating to iOS 8.2 voice recognition in WhatsApp does not work properly anymore. Does anybody have a solution?

    After updating to iOS 8.2 voice recognition in WhatsApp has stopped working properly. I can only dictate three or four words. I have already tried rebooting the system twice.

    same issue ..
    been around sine release of 8.2

  • After updating Itunes to 11.0.4.4 my sync will not work as it says there is insufficient space when nothing else changed?

    I recently updated my iTunes to 11.0.4.4.  After doing this, my ipod touch 4Gen will no longer sync as it gives me a statement about the system not having enough memory left to sync ["The iPod...cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional 2.73GB required)"].  It has 7.96 GB free on a 32GB iPod.  It synced just fine prior to the update and I did not add more than 7.96 GB of files to the library after updating iTunes.  Please Help!  This is a fustrating situation where I can not sync my music, or anything else for that matter, with this issue.  Thanks in advance for all your help.

    Illaas,
    I tried the manual method.  I was able to set the music/video to manual and then restarted the entire system.  After restart, I re-attached the ipod touch to the computer.  The sync automatically ran for everything that wasn't set to manual and it completed without a problem.  I then reset the music/video to automatically sync and restarted the entire coputer/ipod set again.  This time when I re-attached the ipod, EVERYTHING synced and there were no problems reported.  I've never had to do this before, but I will keep it in mind if something like this happens again.  Thank you for pointing me to the manual sync.

  • HT201210 cant restore my ipad from itunes after updating latest ios.  message tells me to turn off 'find my ipad' from my ipad, but I can't because the set up is not complete without the restore.  What do I do?

    I don't know if I'm repeating my question. I can't restore my ipad after updating to latest ios. The battery went low, I had to eject and plug in to charge.  The set up will not complete without resoring from icloud or itunes (i backed up to computer using itunes) or setting up the ipad as a New ipad.  I want to restore all my stuff but the message I get in itune says "Find my ipad must be turned off before 'ipad' can be restored".  Go to icloud settings on your ipad and turn off Find My iPad before restoring your iPad.".  I cant' get to this setting on my ipad because the set up is not complete!!!  I'm stuck. Any help would be greatly appreciated.  I'm afraid if I set up the ipad as new it will backup the new ipad over my previous backup and then I will loose all my photos, songs, aps, notes,......

    I have the same problem and we can't simply just restore from the backup. It says that I have to set up my iPad through restoring. So I tried restoring it in iTunes but it won't restore until I have to turn off this **** "Find My iPad" crap but I couldn't because the set up's not complete and it won't let me go to my settings unless I set it up. So basically it's asking me to go to my settings but before I could go to it I have to restore, and in order to restore I have to go to settings. Get where I'm at?
    Please, Apple Tech people! Help this 14 year old girl on her period, PMS-ing, thinking about how I want  to strangle however made this mistake of a set up, updating her iPad in 3 am in the morning cursing the day she even thought of updating. I seriously need to get out of this loophole. I don't want to use my other iPad that only has 16GB. I just wanted the pretty graphics I saw in my parent's iPad airs, I don't ask for anything more :''''(

  • After updating to Yosemite 10.10.2, macbook air Wifi does not work. What to do?

    I upgraded from Maverick  to Yosemite in Nov 2014 & my mack book air 2011 model became slow. Yesterday after downloading & updating 10.10.2,  Wifi does not work, it prompted Gatway Time out. Anybody can help please? Dr. Mostafa

    Moreover I am to add, in the same network, windows PC Wifi works & more interestingly Macbook with Maverick also connects with the same Wifi, I mean to say this is the problem with Yosemite 10.10.2. Before updating on Sunday last, my Wifi was working nicely.

  • After updating my MBP to firmware 1.1 my internet does not work anymore

    Please help,
    A couple of days ago my MBP asked me if I wanted to update to Firmware 1.1 and I did. I followed the steps like it said and when I restarted it my internet was not working anymore. I called my internet provider and they tried helping me but no luck.They gave me the codes and I tried to set up the PPP address and other codes.
    I am using a DSL cable and a Ethernet connection.
    Does anyone know how I could solve this?
    Thanks!

    Try resetting your iPad:
    Double click the Home button. Slide up with one finger on ALL your apps to close them.
    Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
    This will reset your device without erasing data, apps or settings.

  • After updating to the new browser, my password managing program could not work any longer. I had to go back to the previous version but was wondering when this can be fixed?

    RoboForm password manager stopped working when I updated to the latest version of Firefox. I will contact them as well but I am using rf version 6 and would have to pay (again) to update that program to version 7. This is a vital program because I use a lot of different sites and really would like to continue to use with the Firefox browser.

    Thanks for your help.  I had already done the "forget this device" but had forgotten about the part of entering the passcode with the keyboard in order to pair.  I found my instruction sheet after I posted my cry for help and when I did the pairing procedure right, it worked.  It's weird that it decided to unpair itself.  Both my husband and our daughter have the same keyboard and neither of them have had this happen.  At least now I know what to do if it happens in the future.

  • After update to 33.0.2 html 5 for youtube is not working properly..its flickering..

    please help ..i dont want to use flash player ,,

    You can try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    You need to close and restart Firefox after toggling this setting.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can check if there is an update for your graphics display driver.
    *https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

  • My iPhone stuck on activation AFTER UPADATING AND FORCED RESTORE. and it say my apple id is not working to activate my phone, but i can access my apple id.

    My apple id says cannt activate my phone after trying so many times. And i tried to login my icloud account then it say my apple ID is valid but not an icloud account. Its sounds weird for me. How come my apple id is not vaild for an icloud?
    Im new in apple products.. So please let me know what should i do.
    By the way my phone is not from stollen.. If ever im not able to fix this can apple service do, activate my phone? I only have box of the iphone 4s proof of receipt from a carrier in singapore because it is a plan but alredy finished in contract. Please give me some advixe. Thnx in advance.

    Hey nocillado,
    Thanks for using Apple Support Communities.
    It sounds like you have 2 things you want to address. These articles can help you use iCloud with your existing Apple ID.
    Get help activating your iPhone
    http://support.apple.com/kb/ts3424
    Using your Apple ID for Apple services
    http://support.apple.com/kb/ht4895
    Using the same Apple ID for Store purchases and iCloud (recommended)
    Have a nice day,
    Mario

  • After updating my IPad2, my desktop window IOS/ ITunes is not syncing neither updating

    After updating my IPad2 last week, my desktop window IOS is not syncing and giving message for updating the IOS 11.1.1 on windows.
    But when I am trying to update the ITunes on Windows it is breaking after downloading approx 40 MB.
    Downloaded through ITune help but as earlier after downloading approx 32 MB out of 97MB, the process of downloading is getting aborted.
    Following files has been down loaded
    1. AppleApplicationSupport.msi : = Manually installed after uninstalling the same, as directed by process.
    2. AppleMobileDeviceSupport.msi = Manually installed after uninstalling the same, as directed by process.
    3. Bounjour.msi = Manually installed after uninstalling the same, as directed by process
    4. SetupAdmin.exe = When tried to install, giving ME the message that contact the vendor for installation.
    No additional files are downloaded, tried more than 10 times, WHY?
    WHAT SHOULD I DO ????

    Downloaded through ITune help but as earlier after downloading approx 32 MB out of 97MB, the process of downloading is getting aborted.
    Following files has been down loaded
    1. AppleApplicationSupport.msi : = Manually installed after uninstalling the same, as directed by process.
    2. AppleMobileDeviceSupport.msi = Manually installed after uninstalling the same, as directed by process.
    3. Bounjour.msi = Manually installed after uninstalling the same, as directed by process
    4. SetupAdmin.exe = When tried to install, giving the message that contact the vendor for installation. #####
    No additional files are downloaded, tried more than 10 times, WHY?
    Quicktime already updated.

  • I updated my ipad2 to ios6 and Siri was not included.   Any suggestions. I tried rebooting but that did not work

    I Updated my Ipad2 to IOS6 and unable to use Siri. I went to Settings> General and there was no Siri. I tried rebooting and had no luck. Any suggestions?

    Yes thank god some people felt my frustration today. When I saw it said Siri on the update I was like finally. I tried finding it after the update and was so sad and ****** that it was to good to be true. With apple being so advanced and stuff this is stupid how the I pad 2 can't have it but a phone can. So stupid.

  • TS1702 I just updated my ipad2 to ios6.0.1 and now the stand view in maps shows no information.  The maps are there, but are just the outlines with no text or roads.  Help.

    I have just updated my ipad2 to ios6.0.1 and now having problems with the MAPS APP.  The standard view outlines the area, but it is blank, showing no text or roads.  Anyone know how to solve this?

    Have you tried a - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
     Cheers, Tom

  • After updating my 4s to ios6, I'm having the same problems with wi-fi switching to cellular on it's own and running up my data usage.....anyone else having this problem?

    After updating my 4s to ios6, I'm having the same problems with wi-fi switching to cellular on it's own and running up my data usage.....anyone else having this problem?

    The iPhone is DESIGNED to switch to cellular data when asleep, unless it's connected to a power source, in which case it will stay logged onto the WiFi network.  iPhones have ALWAYS behaved this way.
    Either turn cellular data off at night, or leave your phone connected to a power source to continue the WiFI.

  • HT4623 After I updated my iPhone4 into iOS6, all my applications crash on launch. I tried restoring it but same thing happened

    After I updated my iPhone4 into iOS6, all my applications crash on launch. I tried restoring it but same thing happened

    you'll have to set it up as a new phone.  You have no choice.  If you've been using your phone as recommended, you should have little, if any, data loss.

Maybe you are looking for

  • EOL/EOS report generation fails

    Hi, I am using LMS version 3.2 and i am not able to generate EOS/EOL report with error no connection to Cisco. Saw an update i LMS portal as this: Now Available! LMS 3.2:Patch for un-interrupted service of Cisco.com download for Device/Software/PSIRT

  • List view status of flagged messages in Yosemite Mail Smart Folders

    I'm using Mail in Yosemite with an Exchange server. Before Yosemite, everything was fine, now I have an issue with message flag status in Smart Folders. I have a Smart Folder which is my "ongoing" mail folder; it is set to only show unread and/or fla

  • Help with Switch-Case Statement

    How do you get this in a switch-case statement or work with it?           if (age < 70) {                     JOptionPane.showMessageDialog(null, "People that are below the 70s are nothing special.");           else if (age > 69 && age < 80) {       

  • Idocs for CFM + CML

    Hi all, I'm looking for the proper Idocs for creating/changing CFM & CML transactions from an external source. Can you please point me to a list which will elaborate on which one to use and how to use it? Also, can someone tell me what are the major

  • Attestation Escalation in OIM

    Hi. I'm trying to set up the attestation process in OIM 9031. I want to do the following: if the reviewer doesn't perform any actions for the attestation in 2 week period, the attestation task is automatically re-assigned to xelsysadm. Is it possible