After updating my iphone 6 to ios 8.0.2, the iphone is not working at all!!

after updating my iphone 6 to ios 8.0.2, the iphone is not working at all!! the apple logo shows up for a few seconds. then the screen goes red !! after it restarts and it do the same!! please help.

Well, just for future reference, any time you do an iOS upgrade, it is a good idea to back up your device just prior to doing the download. You can back it up to iCloud or to iTunes. Personally, I prefer to back it up to iTunes, and then to do the download via iTunes as well. Doing a Wifi download can, by the very nature of the OTA environment, run into more issues than a hard-wired one via iTunes.
If it is just a version release (like 8.0.1, or 8.0.2), then I might download it via Wifi, since the content is not likely to be very large. But for any major new release (7 to 8, etc.) it is always a good idea to do it via the USB cable rather than OTA.
I would also suggest that you set up your device to do automatic iCloud backups. Whenever it is turned on (i.e., not manually powered off - it can be "asleep"), plugged into a power source, and connected to Wifi, it will do an automatic backup every 24 hours. Mine usually backs up at night.
But even with my iCloud backup in reserve, I still did an iTunes backup before I upgraded to iOS 8. I like having the extra security of that second backup to choose from, should I need it. Here is a support article comparing the two types of backup:
Choosing an iOS backup method (Should I use iTunes or iCloud to back up my iOS device?)
Sorry you lost your stuff. Hope then next update goes better for you!
Best of luck,
GB

Similar Messages

  • After trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

    after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

    you'll want to restore it using itunes and recovery mode
    http://support.apple.com/kb/ht1808

  • After updates to newer vision iOS 7.0.4 my iPhone 4 is become slow, so please tell me what to do

    After updates to newer vision iOS 7.0.4 my iPhone 4 is become slow, so please tell me what to do.

    There was something you could have done, bought extended warrenty, would have covered this. Apple is outside of it's one year warrenty policy, they had the agreement, and when you update you also sign an agreement that you would be responsiable for any problems that occur.
    The best thing you can do is the Out of warrenty for 199$; you didn't get additional coverage; something bad happen, be glad they offer the OOW.

  • After updating my ipad to iOS 7.0.3 the group pages in my facebook do not open. Can you help

    After updating my ipad to iOS 7.0.3 the group pages in my facebook do not open. Can you help

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
     Cheers, Tom

  • After updating my 5s to ios 8.0.2 , my touchscreen doesen't work

    After updating my 5s to ios 8.0.2 , my touchscreen doesen't work when i have an incoming call , and i deny it by pushing the power button twice. When i try to use the phone the screen is not working at all , altough touch id sensor w/ home button work , and power buttton works. I must unlock via touchid , lock the phone, and then it will work again.

    Hi Corcio92,
    If you are having a reproduceable issue with your iPhone's touchscreen such as you describe - that is it stops functioning only after a particular sequence of steps, you may want to try some things to troubleshoot.
    First I would suggest updating your iPhone's operating system to version 8.1. For directions see this article -
    Update the iOS software on your iPhone, iPad, and iPod touch
    If the issue is still present, you may want to restore the iPhone as a new device -
    iOS: How to back up your data and set up your device as a new device
    Thanks for using Apple Support Communities.
    Best,
    Brett L  

  • TS3694 I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?

    I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?

    I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
    As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
    I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
    As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

  • Iphone 6 screen frozen after update to 8.1 and i try to restore but dosn't work at all

    iphone 6 screen frozen after update to 8.1 and i try to restore but doesn't work at all
    now i'm try to restore the iphone but it give me red screen when it start to download the date and stop every things

    Same thing just happened to me!  

  • My IPhone 4s is freezing up and the wifi will not work. This happened after the update. I have tried to restore it and that did not fix it. Any suggestions?

    My IPhone 4s is freezing up and the wifi will not work. This happened after the update. I have tried to restore it and that did not fix it. Any suggestions?

    Most of your purchases content can be downloaded again via the Purchased tabs in each of the store. I realize that this will be a problem for the iTunes Store on the iPad, but that has nothing to do with apps, since apps are in the App Store.
    If you backed up synced with iTunes before you restored the iPad, your content should be in iTunes on your Mac and you should be able to sync it back again.

  • HT4623 I am on iOS 4, how do I update to iOS5 and later as several of the apps are not working now. Thank you

    I am on iOS 4, how do I update to iOS5 and later as several of the apps are not working now. Does anyone know how to upgrade to at least iOS5. I am on version 4.3.5 now and it is a iPad2 16M. Thank you.

    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS to Version 6.0.x from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

  • TS2771 what to do my ipod touch 4g is updated to ios6 now it has a white scren and wont turn off and to top it off the homebutton does not work at all

    what to do my ipod touch 4g is updated to ios6 now it has a white scren and wont turn off and to top it off the homebutton does not work at all please help me

    Try:
    - iOS: Not responding or does not turn on
    -When it says place the iPod in recovery mode use this program instead of the buttons.
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • HT3180 I just updated my Apple TV 2 and now it is flashing and not working at all.  Help

    I just updated my Apple TV 2 and now it is flashing and not working at all.  Help

    I just did the update to version 5.2 on our ATV2 and now I'm having the exact same problem as the OP- all attempts to access any iTunes services i.e. Movies or TV result in dropping back to the ATV Main menu.   Per Winston's suggestion, I logged out of iTunes and then tried to log back in.  I am getting a message "the server is not responding- please try again later".
    FWIW- all my non-iTunes services on the ATV are working fine- i.e. Netflix and YouTube.
    Sounds like the update has overwhelmed the Apple servers.
    Dave

  • After i changed my computer's name and ip ,the EM could not work???

    My server is sunV890 + solaris9+oracle 10g
    After i changed my computer's name and ip ,the EM could not work???
    Who can help me to sovle this problem?thank you

    The notes in these Metalink documents will help you:
    Note:224425.1
    Note:260571.1
    Note 141955.1
    Note 95418.1

  • On several of my apps my iPad 2 w/ IOS 4.3.3 said I needed to update the apps and the updates were for ios4.3.3 but now the apps don't work at all after updating.  They just flash on the screen but don't stay displayed.  What is going on?

    On several of my apps my iPad 2 w/ IOS 4.3.3 said I needed to update the apps and the updates were for IOS4.3.3 but when the update was complete the apps would no longer work.  They would just flash when I tapped the screen to bring them up but will stay displayed.  What is the problem?

    I Also have this problem!!
    In my situation, the screen simply started exhibiting the same symptoms a few weeks ago (early February) for no apparent reason.  At first I thought the screen was dead, but discovered the heat solution by accident.  Now I turn it on and keep it from going to sleep until I go to bed.  Thank goodness the battery is still awesome on this thing.
    I bought it new and still has the original screen, I keep it at home (never below 62 degrees).  Coincidentally, this happened a day or two after the expiration of the warranty!!  Any help figuring this one out would be eternally appreciated.
    iPad mini retina Wi-Fi, iOS 8.1.3

  • After updating to FireFox 16.0.1 in Windows, the address bar stopped working, as well as the search bar, though not immediately. Reinstall didn't fix it.

    Initially I downloaded an AOL-optimized version, but when the problems came up I reinstalled the regular version and it was fine. Two days ago it randomly started again. Address bar won't go anywhere with enter or pressing the arrow button, and the search bar has no search engine. Trying add a search engine by clicking "manage search engines" doesn't help; the "add search enginges" button is unresponsive and there are none in the list to choose from. I uninstalled everything including my customizations and personal settings and reinstalled, which still didn't help. I tried disabling all the plugins and that didn't work either. I even tried searching from the FireFox home page search, since at that point it was the only page I could get to, and even that wouldn't search. The most recent add-on I downloaded was the Evernote Web Clipper I think, but it didn't seem to coincide with the start of the problems.
    Update: I ran a malware program (MalWareBytes) and it came up with nothing. I also got back into FireFox to get the Troubleshooting Information and added it in. In addition, here's my complete plugin/extension list:
    Plugins:
    Foxit Reader Plugin for Mozilla 2.2.1.530
    Google Earth Plugin 6.2.0.5788
    Google Update 1.3.21.123
    Java Deployment Toolkit 7.0.90.5 10.9.2.5
    Java (TM) Platform SE 7 U9 10.9.2.5
    Microsoft Office 2010 14.0.4761.1000
    Microsoft Office 2010 14.0.4730.1010
    Microsoft Windows Media Services 4.1.0.3917
    Shockwave Flash 11.4.402.287
    Silverlight Plugin 4.1.10329.0
    Windows Live Photo Gallery 14.0.8081.709
    Extensions:
    avast! WebRep 7.0.1473

    Sorry you are having problems. First of all try Fifrefox's safemode.
    *[[Troubleshoot Firefox issues using Safe Mode]]
    If that works post back for further advice.
    Next step, if safe mode did not work.
    <u>First: Try a clean install, <sub>(you have had a none standard version installed previously)</sub></u><br /> that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
    See
    * this recent post [/questions/940399#answer-377134]
    * http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
    <u>Second: try a New Profile</u>
    *http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
    * this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
    **[[Back up and restore information in Firefox profiles]]
    * Until you are absolutely confident about the repercussions I suggest
    ** always use an empty folder when creating a new profile
    ** never delete or rename profiles, just disable or remove shortcuts
    ** after creating a new test profile open it and check for any addons or plugins that may be have been included by default

  • After updating iso 6.1.3 in my 4s my phone is not working properly

    After updating iso 6.1.3 my 4s is not working properly the main problem is touch is not working properly and battery problem also there pls anyone have some solution

    IOS 6 has had a lot of issues to date. I have a possible solution to offer but I cannot  be sure it will work. Two ideas.
    1. Reset the phone: hold the lock button and home button in at the same time for 10 seconds. This does nit erase anything, it's basically like rebooting a computer.
    2. Factory reset: Hook up to a computer and go to iTunes. Sync the phone (if possible). Once synced, in the summary screen select factory reset (or may be another name, I'm working from memory) it's right beside update software. This will completely reset the phone, you will need to restore it after the reset it complete. I don't know if this will help you, but it may. I hope you can fix it, good luck!!!

  • After updating to OS X 10.5.8 my cd-drive does not work.

    I just installed OS X Leopard 10.5.8 on my 1.25 GHz eMac and the cd-drive was working great. Then after letting it install the 10.5.8 combo update the drive quit working. If I manual open it and place a cd in the drive it will read, use and eject the cd with the eject key on the keyboard. If no cd is in the drive it has to be manually opened.
    Leopard does not even have my drive listed in the disk utility. It is listed under about my Mac.
    I have found several threads on this forum with the exact same issue as I am having, but have not found a resolution to the problem. If no resolution is found I will have to reinstall Tiger.
    Any suggestions or help would be appreciated.

    Did you repair permissions after doing the update? Those updates move a lot of furniture around and I find a lot of mis-set permissions after applying most Apple updates.
    NOTE: Starting with about 10.5.6, DU started belching all sorts of meaningless lines of permission repairs. You may not be able to tellwhat's mis-set as the spurious messags tend to hide the real repairs, but let it run anyway.
    If that doesn't restore function, a PRAM ZAP may help. The computer may have lost tack of some of its devices in the update. Rare, but can happen.
    If that still gives no joy, you can add an eject icon in the menu bar. If that works then at least you avoid the manual opening. Here's how:
    (instructions are for Tiger but should work in Leo):
    Follow this path: Macintosh HD -> System -> Library -> Core Services -> Menu Extras. Inside the Menus Extras folder is a little file named Eject.menu. Double-click that file and you get a handy eject icon near the right end of the menu bar. Clicking/holding it is exactly the same function as the eject key on an Apple keyboard.

Maybe you are looking for

  • I have 0.14$ in my Apple ID and i want to delete my balance?

    I have 0.14$ in my Apple ID and i want to delete my balance?

  • Have to restart VPN service after restarting macmini

    Hello, i am using a mid2011 macmini with Lion Server (10.7.2-Build 11C74) loaded over the Appstore, connected to an Airport Extreme (FW 7.6). I configured the VPN service in the Server settings and forwarded the profile to the clients. VPN connection

  • Workflow goes into incorrect status RESERVED

    Hi, We have gone live with the MSS (PCRs) in June and we have a situation where the manager is trying to approve a PCR and when he clicks on the link (which takes him to the approval screen), he receives a NULL error and in the backend the workflow g

  • Workflow Without Approval

    Hello all, SAP_ABA 700 0011 SAPKA70011 Cross-Application Component SAP_BASIS 700 0011 SAPKB70011 SAP Basis Component PI_BASIS 2005_1_700 0011 SAPKIPYJ7B PI_BASIS 2005_1_700 ST-PI 2005_1_700 0003 SAPKITLQI3 SAP Solution Tools Plug-In SAP_BW 700 0010 S

  • Configuration question on css11506

    Hi One of our vip with 4 local servers, currently has https. the http is redirected to https. Now, my client has problem which a seriel directories need use http, not https. some thing like. quistion:      1. If there is any possible, I can configure