After updating my itunes to the latest software, my iphone is not recognized in itunes. Normally, when i plug my phone in to be synced i would get two bell-like noises that confirmed my phone was being charged/synced, now i get 3 monotone "bum bum bum"s.

my iphone 4 (3G) is no longer showing up in itunes, and is no longer even a recognzed device by my computer since i updated itunes. i was going to try updating my iphone software, but it is suggested to back it up before i do that, but i cant back it up if its not showing up in itunes, etc. if i plug in my ipod, i have no problems whatsoever. can anyone help me out here? i feel like an idiot. thanks

If the hard rest isn't working then it sounds like its not going to turn on. Accidently damage isn't covered in you limited hard ware warranty. The iPhone 4 and below is 149$ to replace and iPhone 4s is 199$

Similar Messages

After updated my iPad with the latest iOS my iPad will not show me the home screen

my iPad will not boot up like my iPhone 4 when i installed iOS 8.

Can you explain the problems you are experiencing?
-Ethan

Cannot Update my Nano with the Latest Software 1.1.3

Everytime I plug my Nano into my computer via USB chord, the iTunes program asks if I want to update my Nano with the latest software to Download and Install. I decide to download and install, then once the software has been downloaded an error message appears, "There was a problem downloading the iPod Software for the iPod. An Uunkown error occurred (-48). Make sure your network settings are correct and your network connection is active, or try again later." I always run an iPod/Network Diagnostics and it always show green (no errors) on the system. What can I do to update this latest software update?

I am having the same problem with a mac (10.4.9), itunes (7.3.2 (6)), DSL connection. I have reloaded the nano with the original 1.1.1 software, toggled the lock on top of nano, changed Mac timezone to PDT, rebooted nano, unplugged all other USB devices except keyboard and mouse. The nano is now empty from restoring to original factory settings.
The 1.1.3 software download unloads the whole 20 MB then gives the (-48) error message at the very end where I expect the 1.1.3 load to begin. I have tried several links to the update - keep getting the same error about 9x times now.
Thank you very much, Bob

I have an iphone 3GS. i updated it to the latest software but it can not read the sim card plse help me

i have an iphone 3gs that i updated thia evening to the latest software but the problem it could not read the sim card plse any help

Your iPhone was hacked to unlock it. Now that you have updated it has cleared that hack and is locked with the original cell provider. Call AppleCare and give them the model and serial number and they can tell you the cell provider it is locked with. Then contact that cell provider and see what their unlock policy is and if you qualify.

Updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error

updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error. Tried suggested steps
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Still getting same error message. Can anyone help me

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

I need to update my macbook to the latest software

I need to update my macbook to the latest software but everytime i go to restart it to be able to, it says I need to close gophoto.it installer but i dont have anything with that name on my computer?

You have installed the GoPhoto.it adware. See:
http://www.thesafemac.com/arg-gophotoit/

For some reason when I plug my phone up to charge it just keeps showing me the apple logo and then it goes away shows the battery sign is low and that its charging. So I'm wondering why it wont turn on would I have t get a new one, and would it be free

For some reason when I plug my phone up to charge it just keeps showing me the apple logo and then it goes away shows the battery sign is low and that its charging. So I'm wondering why it wont turn on would I have t get a new one, and would it be free

If you've tried the basic troubleshooting steps (restart, reset, restore from backup, restore as new), and you've tried charging from a wall socket and these all fail, then you have a hardware problem.
If your unit is still in warranty, you will be eligible for a replacement with a refurbished unit free of charge. If you are out of your warranty period, you will be eligible for an out of warranty exchange which will cost the equivalent of 200 US dollars.

Whats the latest software for iphone 3

whats the latest software for iphone 3

4.2.1 for 3G
4.3.3 for 3Gs
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

The microphone of my iphone is not working on call but when i use viber it is working

The microphone of my iphone is not working on calls but when i use viber it is working

Hello there, qasmicomputers.
The following Knowledge Base article provides some great troubleshooting steps for your issue:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I have just tried to upgrade to the new software update and I can no longer access iTunes. I have uninstalled and downloaded the latest software but it will not install. Any help please?

I have just tried to update iTunes to the latest software and now I keep getting error messages. I have uninstalled and downloaded the latest version without any success. Any advice please?

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another install. Does it go through this time?

HT4623 What would happen if i don't update my ios to the latest software version? Will it cause my iphone to malfunction?

I have been experiencing signal related concerns like connecting to 3g network eversince a new software update becomes available in the settings notification. I didn't update to the latest software version because i find it time consuming and tedious. What will happen now if i refused to update my iphone software, will it cause my device to not work properly? Kindly enlighten me, thank you!

No, you can ignore it for as long as you like, but it sounds as though your phone is already not working properly. Though the following updates do not specifically address your concern it is possible that it could help.
About iOS 5.1 Software Update
This update contains improvements and bug fixes, including:
Japanese language support for Siri (availability may be limited during initial rollout)
Photos can now be deleted from Photo Stream
Camera shortcut now always visible on Lock Screen for iPhone 4S, iPhone 4, iPhone 3GS and iPod touch (4th generation)
Camera face detection now highlights all detected faces
Redesigned Camera app for iPad
Genius Mixes and Genius playlists for iTunes Match subscribers
Audio for TV shows and movies on iPad optimized to sound louder and clearer
Podcast controls for playback speed and a 30 second rewind for iPad
Updated AT&T network indicator
Addresses bugs affecting battery life
Fixes an issue that occasionally caused audio to drop for outgoing calls
About iOS 5.1.1 Software Update
This update contains improvements and bug fixes, including:
Improves reliability of using HDR option for photos taken using the Lock Screen shortcut
Addresses bugs that could prevent the new iPad from switching between 2G and 3G networks
Fixes bugs that affected AirPlay video playback in some circumstances
Improved reliability for syncing Safari bookmarks and Reading List
Fixes an issue where 'Unable to purchase' alert could be displayed after successful purchase
Just be aware there is no going back. iOS updates are one way only.

AFter updating to iTunes 11, my first generation Apple TV no longer automatically syncs when I open iTtunes nor does it display its playlists in iTunes.

AFter updating to iTunes 11 my first generation Apple TV wasn't displayed any longer in iTunes. I had to relink it and after that it no longer automatically sysnc when I open iTunes, nor does it display its play lists. It still has its photos and play lists and it is linked up for streaming but does not sync as it used to do. Is it possible iTunes 11 doesn't support first generation Apple TV the same way it used to.?

Yes, the first generation model still works with iTunes 11. It sounds as though you have set it up as a streaming only library.
Navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can sync it back afterwards, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted.

I have just updated my mac with the latest software the brightness now docent work on the f5 f6 keys

I have just updated with the latest software 7.1.1 the f5 f6 buttons now dont work to brighten the screen, it works if I use display in system prefrences

Try a SMC reset:
http://support.apple.com/kb/ht3964
What are your settings in System Preferences>Displays>Display?
Try putting your finger over the light sensor. What happens with the back lighting?
Ciao.

HT4623 the itunes is saying that there is a software update needed to download 10.7 itunes but when i go to update my mac to the latest software, none shows up ? Whats going on?

To update my Itunes to the 10.7 or later, it says I need to update my mac. When i go to update my mac, it says that there is not one available. How do I fix this?

What Mac OS X version do you have? You can go to  > About this Mac and find the version. If you don't have Mac OS X 10.6.8 or later, you'll need to update to that and then your iTunes will update. http://support.apple.com/kb/dl1400 <=== that is the link to purchase the 10.6.8 update
Message was edited by: Destinie Harris

I updated my Torch to the latest software update and it now locks up, resets and is totally unstable...help

I updated my torch a few days ago and ever since I did it has become so unstable.
I tried redoing the update numerous times and it is not getting better?
Phone was working fine prior to update and it now resets and locks up constantly.
Help .
I can't use it

Hello!
At the top of each device forum, there should be some "sticky" threads that discuss the OS levels available for many models. If they include your model, then please use those as reference as you proceed. Otherwise, you will have to dig through the official download portal for OS packages for your model:
http://us.blackberry.com/support/downloads/download_sites.jsp
From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try this procedure to perhaps narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

After updating my itunes to the latest software, my iphone is not recognized in itunes. Normally, when i plug my phone in to be synced i would get two bell-like noises that confirmed my phone was being charged/synced, now i get 3 monotone "bum bum bum"s.

Similar Messages

Maybe you are looking for