After updating my MBP to firmware 1.1 my internet does not work anymore

Please help,
A couple of days ago my MBP asked me if I wanted to update to Firmware 1.1 and I did. I followed the steps like it said and when I restarted it my internet was not working anymore. I called my internet provider and they tried helping me but no luck.They gave me the codes and I tried to set up the PPP address and other codes.
I am using a DSL cable and a Ethernet connection.
Does anyone know how I could solve this?
Thanks!

Try resetting your iPad:
Double click the Home button. Slide up with one finger on ALL your apps to close them.
Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
This will reset your device without erasing data, apps or settings.

Similar Messages

Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate

Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate

Try resetting your iPad:
Double click the Home button. Slide up with one finger on ALL your apps to close them.
Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
This will reset your device without erasing data, apps or settings.

After updating to iOS 8.2 voice recognition in WhatsApp does not work properly anymore. Does anybody have a solution?

After updating to iOS 8.2 voice recognition in WhatsApp has stopped working properly. I can only dictate three or four words. I have already tried rebooting the system twice.

same issue ..
been around sine release of 8.2

After updating to Yosemite 10.10.2, macbook air Wifi does not work. What to do?

I upgraded from Maverick to Yosemite in Nov 2014 & my mack book air 2011 model became slow. Yesterday after downloading & updating 10.10.2, Wifi does not work, it prompted Gatway Time out. Anybody can help please? Dr. Mostafa

Moreover I am to add, in the same network, windows PC Wifi works & more interestingly Macbook with Maverick also connects with the same Wifi, I mean to say this is the problem with Yosemite 10.10.2. Before updating on Sunday last, my Wifi was working nicely.

I updated to windows 8.1. Now acrobat writer does not work anymore even after repair. I am getting an activation error when trying to make a pdf. What should I do?

Can somebody help. A phone number to contact acrobat writer support? I paid for the program and it worked perfectly until I updated form windows 8 to windows 8.1.
I am getting the error"not allowed to use the software, I think license issue or something like that even though I paid for it".

Hi sergeguzy,
Which Acrobat version are you using?
By saying Acrobat writer, do you mean Adobe PDF printer in Acrobat or PDFMaker in Office products?
Also, you might try repairing Acrobat from the Help menu.
Hope to hear from you.
Regards,
Anubha

New MBP logic board and wireless internet does not work anymore

hi there
i had to change the logic board in my only 2 years old MBP15". i purchased a new one and put it in by myself (relatively easy task). i still use the same internal HD as this one still works fine, so all data are the same.
however, the new logic board has obviously a different "identity" from my old one, it came with a sticker which says "ethernet ID 001FF3513E7A" which is different from before. this may be the reason i can still access my wireless network at home, but the self assigned IP address prevents me from connecting to the internet. all settings are as before and it worked always without a problem.
all settings were "automatic" before (using DHCP), and i use exactly the same settings again, but no success. i have to add that i use a new mac mini in the same network with absolutely identical settings (automatic) and this one receives a free IP address from the router (which is only in the last number different from the router's), but the MBP shows a totally different IP address.
i could finally fix it switching to "manual" and adding the same IP address the mini is using and just changed the last number, which has to be different from the time capsule i use as wireless device and the mini. like this everything works just fine.
but why does the mac mini perform everything automatic and the MBP (even with the new ethernet ID - and especially since i connect wireless and not using ethernet) is not able to do so?
i worry if i want to use the internet in any wifi hot spot i may run into troubles...
any idea what the difference between these two machines (with identical settings) is?
thanks and cheers
george

Thank you. It didn't work unfortunately :((
Here are my router's details (Huawei):
Product name HG655b
Device ID 00E0FC-21530307237S0B028701
Hardware version VER.C
Firmware version V100R001C02B018
Batch number RWC3P0.010.29066
Physical address 5C:4C:A9:A5:41:B0
System up time 0 days 0 hours 15 minutes 56 seconds
I don't have Mac filtering enabled.
Now it doesn't even find the wireless network anymore...
My computer and itouch are connected to WAP, but the iphone could not connect to WAP, but only WEP.
Any other ideas?
Thanks a lot!

Since last software update, pre-paid internet does not work anymore. Get "you have not signed up for a data plan" message. Pre-paid acct is in order! What's up???

I have had an iPad 3G for more than a year now. I did not get it with a SIM card, since I expected to use almost completely at home, where we have wireless internet. Eventually, I decided it would be handy to be able to take it on the road, and signed up for pre-paid Internet with KPN (national Dutch telecommunications company). That worked fine, until the last big iPad software update. Since then, whenever I try to make a connection outside the house, I get the following message…
Mobile Data Account
You have not signed up for a data plan.
Would you like to set up a new account?
If you don’t, you can do it later in Settings.
…with the options of ‘Later’ or ‘Now’ to press. If I press Now, I get a screen “Please wait while the page is loading – this should only take a few seconds to complete.” But it never does, the ball just keeps spinning and spinning and spinning….
To my mind, with pre-paid internet I should not HAVE to set up a Mobile Data Account in the first place. I’ve checked with KPN, and my account is completely in order. I’ve checked with the local Apple store, and the geniuses say they’ve never seen this. Can anyone help me?

I updated to 3.6.4 and when I went to NetFlix to watch the next show of a series, it said
something like
Installation complete, restart your browser.
I restarted browser, same problem. Restarted comp. Same problem.
I updated Adobe Flash 10.1, still same problem.
But able to watch some vids on other sites, but full screen gave me the big blank white screen with audio only, had to click around in the dark ( so to speak) to find the minimize button.
I did a System Restore to before the Firefox and Adobe updates.
I then did not update Firefox as recommended and went to NetFlix and wellah, i can view the movies again.
And Full Screen is fine.
I then experimented and updated Firefox only, went to NetFlix and got same msg with no viewable shows.
So did a System Restore once more.
Staying at 3.6.3 for a while longer until I know I can watch my movies.
I don't own a TV, so this is my only form of an occasional escape.
I do hope this is figured out soon.
With what I have done, it seems to be Firefox, Not Flash.
Good Luck to us all.

MS Windows Media player Firefox plugin 1.0.0.8 is installed still after upgrade from FF 3.5. to FF4, but it does not work anymore on Windows 7. The player buttons doesn´t show up. However, it works on WinXP after the same upgrade.

Windows 7 professional with Windows Media Player 11 and WMP plugin for Firefox 4 doesn´t work, but on WinXP it does work normally with the same plugin version after upgrade to FF4.

Try http://forums.adobe.com/thread/892474

After update Mac OS 10.9.1 Trim Enabler does not work anymore!

After updating from Mac OS 10.9.0 to 10.9.1 the program Trim Enabler does not work anymore and my 4 SSDs from Samsung and Kingston are no longer supported.
What can I do?
Should I scrap my SSDs?
Why does Apple do such things?
Will Apple that I switch to Windows? There Trim works with all SSDs and BluRay will not boycott!

Apple does not support TRIM for SSDs that were not factory
installed and TRIM Enabler is a hack to get around this. Any
hack is always subject to being disabled, or worse, with any
system update whether it is OSX or Windows.

Enter key does not work anymore in address bar after FF update

After the update the Enter key does not work anymore. Neither when I type the url directly, nor when I select it from the history.
In short FF has become unusable. Now I need to install and use a less crappy browser. Extremely sloppy, amateuristic update.

see if this is helpful : go to Tool > Options > Advanced > General tab > Browsing and '''Uncheck''': "Use hardware acceleration when available" .

I need to update my nikon D800 firmware but my Macbook Pro does not load a mass storage icon in my desktop, so, how can I update it if I can't get into the CF card pastes?

I need to update my nikon D800 firmware but my Macbook Pro does not load a mass storage icon in my desktop, so, how can I update it if I can't get into the CF card pastes?

I'd say your sister messed up and your iPod is toasted.
Think about it... She plugged it in to another computer, she doesn't remember what she did (yeah, right), and now your iPod is not being recognized by your computer...
Also take into consideration how old is your sister, and how much does she know about electronics?

Mac os 10.4.10 software update problem -- my mac does not work anymore :(

hello!
i have a powerbook G4- PPC. just today, i did a software update of my OS to 10.4.10 (it was the available update version according to the automatic uptae) and during the final stage of the installation, it says "a problem was encountered...installation package is moved to trash"
when i browsed my mac, my apps does not work anymore!!! they just bounce from the dock when i clicked it but it won't open any window. i emptied the trash and restarted my mac but sadly, it just boot but won't continue to the log in part, only in the silver window with the apple logo and mac os x tiger... and the mouse just turns into the color wheel. i waited for 30 mins and nothing happened.
i don't have a startup disc because the mac is a gift and it was long time ago. is ther a software i can use to fix or revert the changes of the unsuccessful OS update? why is there always a problem when i do OS update? isn't apple software stable?
My mac problems' driving me crazy!!!

There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695

HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

Hi Hardy Tasso,
Are you seeing this problem since first launch of PSE13 after installation or recently?
Please try:
Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
Thanks,
Anwesha

After updating my MBP to firmware 1.1 my internet does not work anymore

Similar Messages

Maybe you are looking for