After updating SSL Certificate, iCal is saying the certificate has expired.

Having a problam with iCal after updating our SSL certificate. The certificate expired recently so we renewed it with godaddy and followed the steps on their site to update it on our server. Everything seemed to have gone fine, under server admin in the certificates section it shows the certificate is valid through 2015 and I have Mail and iCal both set to use that certificate (it is the only one you can select.). E-mail works fine but when you connect with iCal it says there is a problem with the certificate. When I click details it shows the certificate has expired and shows the esperation date of the old certificate. I have tried to delete and import the new certificate again but still have the same issue. It seems that some how iCal is still holding the old certificate. Does anyone know what is going on? Did I make a mistake somewhere?

Hi,
According to your post, I understand that client face an problem “The linked image cannot be displayed. The file may have been moved, renamed, or deleted. Verify that the link points to the correct file and location” after change SSL certificate.
If I misunderstand your concern, please do not hesitate to let me know.
Do you see the "page cannot be displayed" error only from your DC server or also from a Windows 7 client machine? What browser do you use and what version?
Please run “certutil –store” command from a command to verify that the certificate is correctly installed in the certificate store. Also run “certutil -store my” to check the certificate from CA.
If the certificate is already installed, please refer to below link to check the value of Cache in registry:
https://support.microsoft.com/en-us/kb/2753594
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Similar Messages

HT201272 I rented a movie, watched half of it. Had 27 days left until it expired. After 3 days, received a message saying the movie had expired and it appears deleted from my rental folder. Any ideas how I can get this movie back?

I rented a movie, watched half of it. Had 27 days left until it expired. After 3 days, received a message saying the movie had expired and it appears deleted from my rental folder. Any ideas how I can get this movie back?

You would have to rent it again.
Once started the movie you have 24 hours to complete viewing.
How long do I have to watch a rented movie?
You have 30 days from the time of rental to watch your movie, and 24 hours (in the US) or 48 hours (elsewhere) after you've started viewing to finish it. Once the rental period expires, the movie will disappear from your iTunes library.
http://support.apple.com/kb/ht1657

Hi, my trial version of Lightroom 5 has recently expired and I have now fully bought it. I have uploaded the CD onto my Mac, but when I open the Lightroom application again, it still says the trial has expired. Does anybody know how I can update it so I c

Hi, my trial version of Lightroom 5 has recently expired and I have now fully bought it. I have uploaded the CD onto my Mac, but when I open the Lightroom application again, it still says the trial has expired. Does anybody know how I can update it so I can finally use it again? I really appreciate any help!! Thank you!

Joanne please remove your current installation of Photoshop Lightroom using the uninstallers located in the Applications/Utilities/Adobe Installers.
You will then want to download Adobe Photoshop Lightroom 5.7.1 from Adobe - Lightroom : For Macintosh. The update contains the entire application. Photoshop Lightroom can not be installed through the Adobe Creative Cloud Desktop application and still be licensed with a serial number.

I have the program Adobe Photoshop Album Starter Edition 3.2 on my PC and some photos from a camera have transferred to it. It says the program has expired and cannot be renewed, how can I get my photos back?

I have the program Adobe Photoshop Album Starter Edition 3.2 on my PC and some photos from a camera have transferred to it. It says the program has expired and cannot be renewed, I am unable to click on the photos. How do I get them back?

Photoshop Album Starter Edition support withdrawal FAQ
This will tell you where your photos are.

I have just downloaded free trial versions of photoshop, lightroom and illustrator. Photoshop and lightroom working perfectly, illustrator saying the licence has expired and I my now purchase it. Help.

I have just downloaded free trial versions of photoshop, lightroom and illustrator. Photoshop and lightroom working perfectly, illustrator saying the licence has expired and I my now purchase it. Help.

http://helpx.adobe.com/x-productkb/global/trial-software-expired-early.html

My 30 day Photoshop trial finished yesterday. I purchased the $9.99 per month Photoshop package and received an email saying "Thank you for your payment etc" But when I go to open PS it still says "the trial has expired.."

My 30 day Photoshop trial finished yesterday. I purchased the $9.99 per month Photoshop package and received an email saying "Thank you for your payment etc" But when I go to open PS it still says "the trial has expired.." Is it supposed to work automatically or is there a step I'm missing?

1. Close all the Adobe Applications. Log-out from creative.adobe.com and re-login.
2. Once you launch the software and when you get the error saying the the trial version has expired, you will have an option saying "License this software".
3. Select this option and enter your credentials and click next.
Nancy O.

After updating my iPhone 4 to iOS5, the camera has lost it's telephoto ability.

After updating my iPhone 4 to iOS5, my camera seems to have lost its telephoto ability.

The functionality is still there. The method has changed. Instead of the slider, you use the 'pinch to zoom' two finger gesture.

After updating to Mavericks, FaceTime will say it's connecting and then fail. I can't connect with my family in the US dialling from UK.

After updating to Mavericks, FaceTime will say it's connecting and then fail. I can't connect with my family in the US dialling from UK. Any tips on how to fix much appreciated!

From the Mail menu bar, select
Window ▹ Connection Doctor
Click the Show Detail button. A drawer opens. Try to send a message and post the text that appears. Anonymize any personal information before posting.

After updating to mavericks on my MacBook, the screen keeps saying "setting up your mac." It has been like this for hours! How can I make it go faster?

After updating to mavericks on my MacBook, the screen keeps saying "setting up your mac." It has been like this for hours! How can I make it go faster? It's has been like this for 4 hrs.

I don't think your mac is setting up. It's stuck.
I would:
hold the power button until it shuts down
unplug all peripherals
do a safe boot (restart and hold down the shift key until you see the apple logo).
If it starts up in a safe boot, then you can try restarting with a normal boot.
If it does not start with a normal boot, then you probably have some incompatible third party software. Likely culprits are:
MacKeeper
CleanMyMac
third-party antivirus software
any other "cleaning" or "optimizing" or similar third party "utilities".
A good place to start would be to uninstall any of those (while in safe mode) and then restart.

Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook

Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook

This could be a complicated problem to solve, as there are several possible causes for it.
Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
Step 1
From the menu bar, select
           ▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
          Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
Step 3
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
          Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
Step 4
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be items named System and System Roots. If not, select
          File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
Open the View menu in the menu bar. If one of the items in the menu is
          Show Expired Certificates
select it. Otherwise it will show
          Hide Expired Certificates
which is what you want.
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
          Secure Sockets Layer (SSL)
select
          no value specified
Close the inspection window. You'll be prompted for your administrator password to update the settings.
Now open the same inspection window again, and select
          When using this certificate: Use System Defaults
Save the change in the same way as before.
Revert all the certificates with non-default trust settings. Never again change any of those settings.
Step 5
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
          Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 6
From the menu bar, select
          Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 7
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Restart the computer, empty the Trash, and test.
Step 8
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in the same way you launched Keychain Access.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
fe80::1%lo0                    localhost
If that's not what you see, post the contents of the window.

When trying to install update 10.5 it says the download has invalid signature and won't install. I run XP

when trying to install update 10.5 it says the download has invalid signature and won't install. I run XP

I'm having similar problems with 10.5. I managed to install it but when I try to run itunes it doesn't open correctly and when I view my account the screen is not presented in the correct format. When I try to search for music it finds nothing. So I ran the diagnostics option but this came back with an error ' secure link to itunes failed'. It also said that the internet connection was verified but when I went into the help option it said I wasn't connected to the internet but as you can see I was and am. I've now uninstalled and reinstalled 3 times, each time I uninstall I've followed the correct sequence as recommended:-
1. Itunes
2. Quicktime
3. Apple software update
4. Apple mobile device support
5. Bonjour
6. Apple application support
I've noticed now that 'quicktime' didn't get reinstalled, not sure if that's the problem. Also when I rebooted after the last Uninstall I received a new error message ' Applesyncnotifier.exe - unable to locate component'. I've also noticed that my CPU is running at 50% according to task manager when I've got apple loaded, but it goes down to less than 20% when it's uninstalled and even goes down to 0%. Clearly, there are a number of people with similar issues and Apple need to sort it quickly.

I updated iOS 7 and my contacts were ok then they suddenly disappeared a few weeks after updating. I have no idea if it has anything to do with iOS 7 but when I email someone the contacts are there. When I open the app they are gone. What happened?

I updated iOS 7 and my contacts were ok then they suddenly disappeared a few weeks after updating. I have no idea if it has anything to do with iOS 7 but when I email someone the contacts are there. When I open the app they are gone. What happened?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know

how im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know

What "auto shutdown problem" are you talking about?

Itunes on ipod touch 4G says: the certificate for this server is invalid

Itune on my ipod Touch 4G says: The certificate for this server is invalid. You might be connecting to a server that is pretending to be ....

When connected to all networks? Or only one network?
Try going to Settings>Safari and Clear Cookies, Data and History.
Go to Settings>General>Date&Time and make sure that date, time and time zone are correct.

After updating to iOS 8.2 on the iPhone 4S, iMessage and FaceTime no longer work properly.

After updating to iOS 8.2 on the iPhone 4S, iMessage and FaceTime no longer work properly. constant hovering and disconnect from the service.
Also, I noticed that going to the settings section is disabled service "Find iPhone".
To get to the point tinctures "Messages" and "FaceTime" takes a few minutes.

Hello Greg,
Welcome to Apple Support Communities.
This article should explain why the Volume slider isn't always visible on your iPhone 4s, and it also provideds tips that can help you resolve the issue.
If you don't see the iPhone Volume slider - Apple Support
Take care,
-Jason

After updating SSL Certificate, iCal is saying the certificate has expired.

Similar Messages

Maybe you are looking for