After updating Time Capsule to 7.7.2, Airport Expresses can no longer connect

After I update the Time Capsule firmware to 7.7.2, my three Airport Expresses can no longer connect to the Time Capsule (their orange lights blink and they appear inaccessible in the Airport Utility). When I downgrade, they are able to connect fine.
They are connecting to the Time Capsule over my 5GhZ wireless network.
Any help?

Hi yonajon!
I have some resources for you that may help you resolve this issue. First, here is an article about addressing the blinking amber light:
Wi-Fi base station: Understanding and resolving a blinking amber status light
http://support.apple.com/kb/ts1589
If you are still having issues, you may need to reconfigure your extended wireless network:
Wi-Fi base stations: Setting up and configuring an extended wireless network (802.11n)
http://support.apple.com/kb/ht4259
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Similar Messages

I recently upgraded my OS to Lion 10.7.4. I also just upgraded from a 1st Generation Time Capsule to a 4th Generation Time Capsule. I have an Airport Express (Version A1264) that I formerly used to extend my wireless network. AE no longer works.

I recently upgraded my OS to Lion 10.7.4. I also just upgraded from a 1st Generation Time Capsule to a 4th Generation Time Capsule. I have an Airport Express (Version A1264) that I formerly used to extend my wireless network. Airport Express no longer connects to my network. I have downloaded Airport Utility 5.6 to try and configure, but with no luck.

TC first gen was not simultaneous dual band. So.. it's probably best to factory reset your extreme and then tell it to extend again.

After updating iPhone 4s to 7.1.1 My wife can no longer get 3g signal at her work

After updating iPhone 4s to 7.1.1 My wife can no longer get 3g signal at her work. Other un-updated iPhones still work fine. IOS 7.1.2 does not fix the problem.

Hi there Salient2,
You may find the troubleshooting steps in the article below helpful.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
-Griff W.

After updating my iphone 4S with the ios 6, I can no longer open my apps. HELP!

After updating my iphone 4S with the ios 6, I can no longer open my apps (Facebook, Instagram, games, Voxer, WhatsApp, Tumblr). It prompts me to enter my Apple ID. I enter my email address (what is listed everywhere as my ID) and it does not recognize that. I wondered if it is saved somewhere as something different so I went online to find it. When I go to the support page and request my apple ID, it takes me in circles to reset my password but never tells me my ID. HELP!

Hello JeepJackie
Check out the article to download your past purchases to your iPhone.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HT4623 After updating to IOS 7.0.2 today my phone will no longer connect to verizon.Anybody have a clue???

After updating to IOS 7.0.2 today my phone will no longer connect to verizon.Anybody have a clue???

Contact apple support at 1-800-692-7553 for mail troubleshooting.

Hello. I recently updated my ipad to ios 8.1 and i can no longer connect it to my macbook (osx 10.5.8). itunes (10.6.3) does not recognize it. how can i delete around 3000 pics i imported to my ipad from my old macbook?

hello. I recently updated my ipad to ios 8.1 and i can no longer connect it to my macbook (osx 10.5.8). itunes (10.6.3) does not recognize it. how can i delete around 3000 pics i imported to my ipad from my old macbook?

Click here, buy a Mac OS X 10.6 DVD, and then run the 10.6.8 combo updater.
(90452)

What is the proper way to extend 2nd generation time capsule network to 2nd generation Airport Express?

I have a Simultaneous Dual Band Time Capsule. Up until now, I have been extending the network with the Airport Express (2nd Gen, the 802.11n model). Since it was not simultaneous dual band, it was extending over the 2.4 GHz band so as it could extend b, g, and n and support my iPhone at 2.4 n as well as my iPad and MacBook Pro at 5 GHz.
I just bought the new simultaneous dual band unit, which theoreticalkly should be able to extend both bands.
Now, it is not that simple. I also run a guest network, which I assume also gets extended when WDS is on. I also still have the old Express which I have relegated to another part of the house.
When I set up the new Express, it asked me which one of the networks I want to join, either <SSID> or <SSID 5GHz>, the automatically generated name for the the 5 GHz band on the Time Capsule. Which one do I join? How do I know that both are extended? When I connect to the <SSID 5GHz> now my iPhone can see that one and connect to it, so I am assuming it is NOT going at 5 GHz.
And I have no idea at all what the guest network is doing....
Does anyone have any insight into tthe proper way to configure all the units, and what I can expect? My network is as follows:
Airport Express (Simultaneous Dual Band)
Cable Modem > Time Capsule (Simultaneous Dual Band) >
Airport Express (802.11n, last gen)
I want to run guest network (hopefully simultaneous dual band) and personal network. I want the new express to run both bands just like the Time Capsule, and for the old express I want to know which of the two bands I am extending.
Thank You!

I also run a guest network, which I assume also gets extended when WDS is on
Unfortunately, the Guest Network cannot be extended.
When I set up the new Express, it asked me which one of the networks I want to join, either <SSID> or <SSID 5GHz>, the automatically generated name for the the 5 GHz band on the Time Capsule.
This likely indicates that the Time Capsule has been setup to use separate names for the 5 GHz and 2.4 GHz bands, instead of the default, which uses the same wireless network name for both bands.
In order for the AirPort Express to be able to extend both bands, the Time Capsule will need to be configured so that both bands use the same wireless network name.
Then, configure the AirPort Express to extend the wireless network name of the Time Capsule, and it will extend both bands. At least, that is the way an AirPort Extreme works, and I assume that the Express is the same. I don't have an Express here to test, but will in another day or two.
The location of the Express is important, since the 5 GHz signals are not as strong as 2.4 GHz signals. You may need to experiment by placing the Express closer to the Time Capsule than normal. With an AirPort Extreme, I find that the Extreme must be located no more than about half the distance from the main router to the area that needs more wireless coverage.
If you continue to use the previous model Express to extend as well, it too must be configured to extend the wireless network name of the Time Capsule. Configured this way, the Express will extend the stronger of the 2.4 GHz or 5 GHz signals, so it will likely extend the 2.4 GHz band unless it is located close to the Time Capsule.
To find out which band the previous model Express is extending, locate a Mac laptop close to the Express and hold down the option key on your Mac while you click on the AirPort icon at the top of the screen. The info displayed will indicate whether you (and the Express) are connecting using 2.4 GHz or 5 GHz.

How to set Time capsule as base station and airport express to join

I have a wireless network using an Airport express. Now I would like to have time capsule to be set up as the base station and just the airport express to join this network, in order to listen wirelessly to music, but keep the speed of the time capsule.
Right now, the ethernet cable is connected to the Airport express. Do I have to switch that to the Time capsule? I tried to do that, but it wasn't able to connect to the internet in this case.... I am lost. Now I have a speedy time capsule, but have the network running on the slow Airport express... Please help!!! And I believe as you guessed already, I am not a smarty, when it comes to networks.
HELP! Please!!

I actually have mine set up this way that you are looking to do. Works well for me. here si what you can try:
Make sure you unplug the Express all together first. It does interfere when trying to set this up. Next setup your TC just like the instruction says (remember no Express). You should just be able to set up your TC, connect to the internet and get going like any other router or like the Airport Extreme. if you set up your TC with your comp and CANNOT access the internet that is your first problem. My suggestion: do a hard reset of the TC if you have already attached it to the Express while also doing a hard reset of the Express - this is to bring them both back to afctory defaults to start fresh. This definitaely helped me.
So once you have your TC up and running and you have internet access thru your TC, you are halfway there. Make sure your TC shows in the left column of the Airport Utility (and dont forget to install the Airport Utility from the disc that comes with teh TC before you do any of this, forgot that). if it shows up in the left column you should also be able to see the Express in that column, both with green lights, if you have set this up correctly. Then plug in the Express. As the above mentioned remember t make sure it is connected to the correct port on that back of the TC. It will remain amber then blink a few times. This is normal. It should be blinking amber when you attempt the setup of the Express. Your airport utility shoul dnow see the addt base station (Express) in the left column. When you click on it and click CONTINUE it will ask you if you want to switch networks. You can do that and lick switch provided you are already connected to the TC and alrady have an internet connection. Once you click switch the TC will disappear from the left column and you will be left only with the Express. This is OK. I am not in fron to fm y comp right now so I am doing this from memory but in setting up the Express you want to add it to your existing network. You will have to choose which network to add it to in a drop down box in one of those steps - just make sure you add it to the one that you named your TC. Then click to the finish and click UPDATE. Let it finish the update - you shoul dsee green light son both the TC and Extreme HARDWARE - not necessarily in the airport utility. Also it is a good idea to to to the menu bar on top where the WiFi icon is and manually select your network in case you get bumped off while the TC is updating itself after you ckicl update - this happened ot me and it wouldnt complete the update and took me forever to figure out it needs internet connection to complete the update screen.
next make sure you RESTART your comp. This I guess will make all changes basically go into effect as you cycle it up. When you are up and running you should see your WiFi connect as your TC and NOT your Express. Also go back into airport utility and see if you ahve both items listed in left column - they too should have a greenlight. If they do you should be set.
I did this because I wanted to steam my iTunes files that I have on my TC to stream to iTunes via my network. The Express part, as you know, is what allows the streaming. So make sure you plug your stereo cable into the Express audio port. Then go to iTunes and on the bottom you will notice a new little drop down box - make sure to select Express so it can wireless stream (in iTunes prefs there is a pref you must turn on also to allow iTunes to see remote speakers.
Ive simplified this a little since I am not at home but this is the gist. In a prefect worl you should be able to easily have this work. I did so I know it does at least work if not anything else. You just have to make sure you get the steps correct and have everyhing plugge din where they should be...
G'luck

Time Capsule as iTunes HD and Airport Express connected to network

I purchased Time Capsule with the plan of making it my external HD for iTunes, wirelessly, not sure how to set that up.
Also I have Airport Express and would like to link it since TC does not have the connection outlets which allow the sound system to play wirelessly.
Thanks for the help.

Hello,
i know mine is a differen problem but you seem to know what you're talking about! I was using my powerbook s normal but trying to install an internet dongle. the whole thing froze so after a while i forced it to quit by holdng down the on button. when i started it up again i got to the login page and can logn and see my wallpaper but that is it - the finder and desktop never appear. The same happens if i login in as administrator and i don' think there are any other users on my machine. i feel like i have broken the hard-drive or something? i don't know what to do.
can you help?
M

Advice to extend range from Time Capsule - wireless and ethernet with Airport Express and Airport Extreme

Current wireless network is Time Capsule (connected to a Cisco router, 1GB switch to servers and printer 1) to Airport Express (wireless) and to Airport Extreme (wireless). Distance means poor signal at the Extreme which has 2 printers (ethernet cables) and an iMac (wireless)
Solution is to connect the Extreme to the Time Capsule via Cat 6 ethernet cable
How do I configure the TC and the Extreme?
I will keep the Express for a wireless extension to the TC

Wired Ethernet from the TC to the AirPort Extreme will result in much better performance. It sounds as if you are not configuring the AirPort Extreme correctly.
Please try the following steps carefully:
Unplug the Ethernet cable from the AirPort Exteme if it is not already unplugged. With the AirPort Extreme powered on, hold in the reset button on the Extreme for 10 seconds and release. Allow a full minute for the Extreme to restart
Connect the Ethernet cable to the WAN "O" port on the Extreme.
Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on AirPort Extreme.
The example below displays an AirPort Express. You will see AirPort Extreme.
AirPort Setup will open up automatically and take a minute to analyze the network, then announce that the Extreme will be configured to extend the Time Capsule network.
Enter a device name that you want to use for the Exterme and click Next
Wait a minute while AirPort Setup configures everything for you. When you see the message of Setup Complete, click Done.
That's it. Pretty simple. Things should be working fine now.

Attempted to set up an HP wireless printer and my whole network is now a mess. HP help told me I had too many signals, as I have a Time Capsule 4 Macs and 4 Airport Express set up. Anyone else figure this out?

I attempted to set up a new HP wireless printer. It is unstable and HP support says I have too many devices since I have a time capsule and 4 airport express either extending my network or being used for a different printer or stereos. Anyone else find that their Airport Express/Extreme interferes with a wireless printer. If so, what's the point?

I have a similar model, the HP 8500A here in the home office that I originally hooked up using wireless on an AirPort system consisting of an AirPort Extreme, Time Capsule and 2 AirPort Express devices.
The HP was originally hooked up to the "main" router using wireless as a test to see how wireless would perform. No issues with setup or performance over the first few weeks. I did eventually change the device to connect using Ethernet once I had room to move the device near the AirPort Extreme.
HP is pulling your leg with the advice about too many devices. The AirPort Extreme and Time Capsule will handle up to 50 wireless devices. In my case, I did nothing except follow the setup procedure and restart the entire network....something that I always do when I make any change to the network.

Which is better for range and speed of wifi, time capsule A1254 or the new airport express? I don't need the hard drive aspect of the time capsule. Thanks!

Thanks for any help with this.

You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
An Extreme's Guest network is separate from its Main network; that is the reason for having it.

Given wireless range of Time Capsule is 150', will this work? Put DSL modem on phone line in garage, connect ethernet to small office bldg (125') and connect separate ethernet to main house (200'). Time capsule on each end (or Airport Express)? Thx

Given Time Capsule wireless range is 150', will this solution work? In detached garage, connect DSL modem to phone line, then connect ethernet cable to DSL modem and run 125' to small office bldg. Connect separate ethernet cable to DSL modem and run 200' to main house. Put time capsule or Airport Express in each bldg resulting in separate wireless networks in each? Thanks.

This will work very well. You can run a CAT5e (or CAT6) Ethernet cable up to 330 feet...or 100 meters...with virtually no signal loss.
CAT6 costs a bit more, but will handle next generation Ethernet speeds, so if you have a choice, suggest that you opt for CAT6 cabling.

New Air Port Time Capsule Not Working With Old Airport Express

I have been running a home network comprised of a Air Port Time Capsule (A1254) and 5 ea Air Port Express (A1264) for several years with no problem.
The Air Port Time Capsule (A1254) died and I replaced it with an Air Port Time (A1470). Now none of the Air Port Express (A1264) work, all flashing yellow. All other network functions seem to work okay, Time Capsule Backup, Apple TV, Internet …
I am using AirPortUtility 6.3.1 for setup but do not see any way to setup the Air Port Express.

Reset the Express to factory and start over.. they should work.. are you using all 5 in extend wireless mode?
When you reset the Express click on the wifi icon in the top menu area.. and the newly reset AEx will appear in the list.. click it and Airport utility will open and attempt to automagically connect it to the TC.

Time Capsule Wireless Range Extended with AirPort Express

I recently was able to (finally) get my Time Capsule working with my previous 2WIRE modem/router (DSL through ATT). This took hours, but it was worth it! Time Capsule is now my primary router with it "bridged" with the 2WIRE device which is now only a modem. Back up is working fine with our three Apple laptops. However, the wireless signal is weaker than when it was set up with the 2WIRE alone. Our signal strength upstairs was weak making internet connection VERY slow and frustrating. I got an AirPort Express to see if I could use it to boost/extend the wireless signal from the Time Capsule unit. Set up was simple, and it is working great! I have it plugged into a wall outlet between the Time Capsule and the stairs leading upstairs. The wireless signal is now "full" everywhere in the house!

Wired Ethernet from the TC to the AirPort Extreme will result in much better performance. It sounds as if you are not configuring the AirPort Extreme correctly.
Please try the following steps carefully:
Unplug the Ethernet cable from the AirPort Exteme if it is not already unplugged. With the AirPort Extreme powered on, hold in the reset button on the Extreme for 10 seconds and release. Allow a full minute for the Extreme to restart
Connect the Ethernet cable to the WAN "O" port on the Extreme.
Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on AirPort Extreme.
The example below displays an AirPort Express. You will see AirPort Extreme.
AirPort Setup will open up automatically and take a minute to analyze the network, then announce that the Extreme will be configured to extend the Time Capsule network.
Enter a device name that you want to use for the Exterme and click Next
Wait a minute while AirPort Setup configures everything for you. When you see the message of Setup Complete, click Done.
That's it. Pretty simple. Things should be working fine now.

After updating Time Capsule to 7.7.2, Airport Expresses can no longer connect

Similar Messages

Maybe you are looking for