After updating to 10.4 itunes, i cannot sync my devices or connect to the store. I deleetd ITunes and reloaded still the same problem. Running windows vista had no problems previously, any assistance please? Solutions
After updating to Itunes 10.4, i cannot now connect to teh store or sync any of my devices, everything was working fine bfore, i removed Itunbes and re-installed same probloem, can anyone help? i am running windows vista
try to reinstall again. They had a message last night that there was an error, the download wasn't available for awhile, I was able to download and reinstall this morning.
I had uninstalled all apple products and tried to install but the download had disapeared till this morning. Worked after reinstall.
Similar Messages
-
I have copied my iTunes library onto a new computer, but when I play back the songs using the new computer, there seems to be random "miss" or "drop out" during play back, similar to a small scratch on a vinyl record. Although when I play the same song over again, the "miss" occurs in a different location during the song. No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?
You don't say which version of iTunes you are using, but the symptoms you describe have been encountered by some users with the 64-bit version of iTunes 12.1.
There is an alternative version for 64-bit editions of Windows here:
iTunes 12.1 for Windows (64-bit — for older video cards)
that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent. The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer. The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8). It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers. -
My version of Lightroom 6 is still showing trial version after Serial Number has been Installed.
I have tried re-installation but still have the same problem.
Could you please forward a solution to this problem.Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Hi, I've just tried to upgrade my iphone 3gs and it wont restore from itunes or connect to the server to activate. Sorry I started this ! Any ideas please it's driving me mad and Ive lost my phone
What is the exact message you're getting?
-
I was trying to upgrade to itunes 10.x on Windows 7 Pro. The installation stuck at the stage "Registering iTunes automation server". I removed the Antivirus software and re-install iTunes again. But still get same problem. Any solution?
JAPeter Hah
After spending another two days on pinning down the iTunes 10.5 blank store page problem, here's the solution to be found: https://discussions.apple.com/thread/3372617?start=0&tstart=0
Look out for "japiohelp".
In short:
a) press Windows key + "R", enter "cmd", and press Ctrl+Shift+Enter (= runs as admin)
b) enter "netsh winsock reset" and pres enter
c) reboot the computer
and Bob's your uncle.
P. -
After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home (this is the network I used to update the phone). My iPad however does not seem to have any problem connecting. I have restared the phone, toggled the router, re-entered the network password but there's still no connection.
When your device is trying to connect to the work Wi-Fi network, go to Settings > Wi-Fi > then tap on the name of the Netowrk that she is having trouble with. Then tap on forget this network. Let the device attempt to connect again and make absolutely sure she is trying to connect to the work network and not a nearby network, then make absolutely sure the password is entered correctly.
-
After updating iPhone to 7.0.2 Personal Hotspot USB can't connect, whats the fix?
After updating iPhone to 7.0.2 Personal Hotspot USB can't connect, whats the fix?
Try this iMessage workaround
Look for a fix by Apple by the end of the week..... -
I'm having some problems wiht Firefox, for example; Youtube isn't loading right, Facebook won't let me send messages, search up people, and this website i made wont load right also. I've re-installed and updated it but still the same problems. Any help?
Because I know enough to be dangerous... I was trying to extend the two outside columns down.... Instead of just using faux columns which I have fixed since I posted the question.
The other link problem is the left sidebar links. When you go to the event photos page I have a repeat of the sidebar links that are on the newsletter page. I used named anchors on the newsletter page to link to the particular article. From the Event Photos page the links look like this:
<a href="1112Visions_Iss1.html/#puzzle" target="_self">[Puzzle]</a>
The problem I am having is that some of these go to the newsletter page and the anchor and some do not (I get an error message saying it can't find the page). To add to the problem is that when we choose say the President's Message, when it goes to the newsletter page and the correct anchor, the newsletter page is missing all the links to the graphics... the photos are missing the graphic for the faux columns is missing. It makes no sense. When I preview the newsletter page from Dreamweaver everything shows up fine.
I do not know if all of this is being caused because I haven't posted this stuff to the site or what. I've tried re-booting both the browser and Dreamweaver, dumping the cache and still the same nonsense.
Got any ideas? -
I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.
Again without stating the trouble shooting steps you have taken, its hard to direct you with any information.
Try a different port on the computer.
Does the iphone beep when u plug it up. ?
Plug iphone into computer and give it 3 to 4 minutes to see if it connects and is running slow.,
Delete the apple mobile device from your computer.
Upgrade itunes to newest version.
Is you USB cord defective ?
Any USB 3.0 on your system ? .
Delete or Disable any antivirus program on your computer ?
I will tell u the problem is your computer not the phone.
We could do this for hours. -
Can I use iTunes 10.7 and iTunes 11.1.3 on the same computer running Windows 7?
Can I use iTunes 10.7 and iTunes 11.1.3 on the same computer running Windows 7 (64-bit)?
Yes, but it needs to have at least two copies of Windows installed.
(94491) -
Just bought the ipad4 and can't log into facebook. Times out and tells me to check my network connection. Anyone having the same problem or any ideas?
Hey barnsieno10,
Thanks for using Apple Support Communities.
Looks like sign in issue, This article is a great resource for the message you are receiving.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/ts3970
Have a nice day,
Mario -
I've been trying to make calls to other FaceTime users (on iPhones and Macs) via my Macbook Pro.
On my side FaceTime continues ringing. However, on the other side, when the person has picked up the call, FaceTime would show 'connecting' for around a minute or so and then 'connection lost'. Meanwhile, FaceTime would still continue ringing and would only show 'unable to facetime' after 2 minutes or more.
My FaceTime version is Version 1.1.1 (309).
Macbook Pro 10.7.5
Wondering if anyone has the same issues.
Or does anyone have the solutions??Yes. I'm having the same problem with the same FaceTime version and Macbook Pro OS10.7.5 as well as the iPod Touch 4th generation.
Another thing is that since updating the OS, Skype on Facebook does not receive the image without freezing or having blinking horizontal lines running through it. -
I have had the same problem. Any new developments?
I have installed a vi that works fine on 2 of my XP machines. When I installed the vi on a PXI chasis running Windows 2000, I get the error loading NIvision.dll message. I have removed ALL the NI software, reloaded LabView 7.0, IMAQ 7.0, and I still get the same message. Any thoughts?
What version of the NIvision.dll is on each machine, (the ones that work and the one that throws the error message)? You can check the version in MAX by expanding the Software tree, selecting IMAQ Vision, and then the main part of the screen will display the version, such as 7.0.1.187.
Also, do other VIs exhibit the same problem? For example, what happens when you load a LabVIEW Vision shipping example on the Windows 2000 system?
Best regards,
Dawna P.
Applications Engineer
National Instruments -
I've seen a lot of postings about keynote crashing when doing simple copy and paste. I have the same problem, Keynote 9 v5.1.1 Is there a fix?
I had the same problem with the LCD after replacing hinges and could not figure this out.
To solve the issue, I bought another A1237 of eBay that apparently had no HD/SSD, but it arrived with a swollen battery. I removed the bad battery and replaced and moved SSD over and "Voila"...it amazingly light up........... -
After updating itunes to 11.1 and phone to ios7, I lost more than 3500 songs from my library. My ipod has 4185 songs less the most recent I purchased.
Is there no way an ipod can be used to restore the lost music? Yes, some of it was from cds but were done a long time ago. Obviously it was acceptable for me to compile this music then, now they want to say since it all wasn't purchased, I can't have what was already mine? Plus I do not use nor want to use the cloud, but it keeps creeping up even though I don't want or use it. HELP!See Recover your iTunes library from your iPod or iOS device.
tt2
Maybe you are looking for
-
Message that printer cannot be found in directory; my printer is not printing
My HP Photosmart 5514e - all in one printer - will not print. I have gotten a message that it is not found in the directory. I have tried so many different things -- printer will be 3 years old at the end of the month.
-
ADD-ON missing in Phase "ADD-ON Selection"
Hello All, We are in the process of updating our ERP 6.0 system (EHP4 FOR SAP ERP 6.0 / NW7.01) to EHP5. While running maintaince optimizer got some warnings for 4 add-ons as below. Component C-CEE 110_604 without suitable Product Instance Software
-
Need a new computer - have PS cc
I have PS CC and am thinking of a new computer. I am not technical and have looked at the system requirements and am trying to match up with some affordable options. I want a desktop Here are 2 options but I am confused as they state Intel Pentiu
-
Hello, I have problems with the running of my USB app. I get a error of "Exception in thread "main" javax.usb.UsbException: Properties file javax.usb.properties not found."... Well, I have killed Google with this error, but still no luck. This is th
-
Account balance different whether stated from FS10N or ZCAL
Hello everyone, This is a slightly difficult issue I propose to you. This is about an account balance whose value is different whether it is stated from FS10N or stated with an other transaction, ZCAL. After some investigations, the gap comes from th