After updating to 6.0 iPhone doesn't show in iTunes for the wireless sync
I have the iPhone 4s, after updating to 6.0 it doesn't show in iTunes for the wireless sync. My iPad which is first gen. still shows up. If I plugin with usb it shows up but as soon as I unplug it disappears.
When I click on the sync wireless on the iPhone , it trys to sync but nothing.
it's okay, it is not silly. but yes it was on but i went ahead and turned it, (the phone) off rebooted and turned it back on and rebooted phone again to see if it helps it any.... but to no it did not change, it still doesn't show up. as well as when i look in on wifi and see choose network mine is not populated until after a couple seconds. so it has something to do with not being able to hold on to a wifi signal when going to sleep or putting phone to sleep via power button. i do not see the wifi signal meter until a couple seconds after i wake it up from sleep. and now neither my ipad or iphone show up in itunes. so there is issues i guess with something. i have tried everything an dam too frustrated to do anything more.
Similar Messages
-
When I plug the iPhone into the computer's USB the computer recognises the phone and wants to transfer files but the phone won't show up on the left side of iTunes and sync. It has worked fine for the past 18 months. Seems to be since the last update to iTunes.
There's a tip for that: http://support.apple.com/kb/TS1538
-
ICal doesn't show all text for the activity
When I updated to iCal version 8.0 i noticed that when I am in week-view, iCal doesn't show all the text for an activity, although there is plenty of room. For example I have a lecture from 9 am - 4 pm and in the activity I put down all the things I have to do, but it only shows the first line for my activity. I need to drag the box or double click on it to see all the text. Can I change this?
Gabriella,
Sometimes making the Calendar window bigger, or using full screen allows additional text to be displayed.
View>"Make Text Smaller" is also an option for those with Eagle Eyes. -
I have an iPhone 4 that has been activated over the air, "PC Free" and have used it for a month without ever connecting it to a computer. I have downloaded several apps, taken a few pictures, and even downloaded a few songs. Now I want to connect to my computer and sync and backup. Will I loose all my data?
Before you connect to a new PC, make sure that autosync is disabled in Edit/Preferences/Devices, otherwise her phone will be wiped during the following sync.
If she has data on the phone she wants to save, back up manually:
Disable autosync in iTunes, connect your phone to her new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing. Transfer the purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
About backups and what's saved:http://support.apple.com/kb/HT1766
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Transferring data is also covered here: http://support.apple.com/kb/HT4137 -
I entered new fields in a form that was created last year to update it. However, now when I view the responses, the headings are listed as Column 1, Column 5, etc. rather than the name of the heading. Can you please help?
Hi Mike,
CRSE is an OEM Product and for use with a custom application they have written. Unfortunately we don't their reports or how they are connecting, it would appear they were originally built off a SQL and then set to a Dataset in the app or they could be adding the data source at runtime. Lots of variations and without access to the source code to see what they are doing not much we can help you with.
You need to contact the OEM Partner for help in resolving this and find out what you can and need to do to update your SP and work with their canned reports,
Thank you
Don -
IPhone doesn't show in iTunes, tried everything
I've been combing these discussions and have tried everything listed here and all the steps in the troubleshooting tutorials. The error message I get when I try to connect my iPhone 4S to my computer running Windows Vista is: "iTunes could not connect to the iPhone... because an invalid response was received from the device," My computer recognizes it; however if I right click on the iphone icon there, then select "Open command prompt...", I see this message: "The system cannot find the drive specified. 'pid_12a0' is not recognized as an internal or external command, operable program or batch file. 'mi_00#0#{6ac27878-a6fa-4355-ba85-f98f491d4f33} is not recognized as an internal or external command, operable program or batch file." What drive am I missing? What command is this talking about? Could I have a registry defect that's getting in the way? I've uninstalled and reinstalled latest version of iTunes and iOS, AMDS has been reinstalled. And I've checked my Kaspersky Internet Security to make sure it allows all Apple products as Trusted. Tried three different USB cables and every port on the computer, too. ***!?
I do not know what the intention is to open and run command prompt on iphone. Lovely picture, BTW, thank you.
Apple created iphones and ipads the way that windows explorer or OS can only read and manage one folder. DCIM
folder that contains your pictures on the phone. Only the pictures made by you, nothing else. So anything you trying to accomplish in command prompt is not going to happen.
If you read somewhere that you need to right click to back up your phone or transfer purchases or restore you need to be looking on the other screen in that article. Look at how to back up instructions here. They have step by step.
http://support.apple.com/kb/ht1766.
If I knew what you trying to do I may be better capable to help. -
WRT600N Doesn't show any entries in the Wireless Client List
Hi, my WRT600N is on firmware 1.01.35 build 3. When I check the wireless client list from the Wireless MAC Filter page, it is empty, even though I know I have 3 clients connected. They are all using 802.11g, as I don't have any N devices yet. When I go to the Status page and check the DHCP Client Table, both of my wired clients are there, but only 1 wireless client appears. The DHCP Client Log file is useless, as it only appears to log the ip address it receives from my isp. There are no entries of the ip addresses it has given out. Is my WRT600N defective, or is there firmware in the works to correct this?
Another thing I've notice, is that the DHCP client table is showing the 2.4 wireless devices as LAN interfaces. Shouldn't it show the frequency, like it does my one 5GHz device? Things have changed, because the Wii is now showing in both the Wireless Client List, as well as the DHCP Client table. It shows as a LAN interface though, which is wrong, it should be 2.4GHz. My one pc that is a 5GHz N device, is also showing in both the Wireless Client List, & the DHCP Client table. Neither the wireless 2.4 gaming adapter, or the HR20 connected to it show up in either list. Neither does a laptop which is 2.4GHz. This is really a concern, because I've caught 2 neighbors stealing my bandwidth in the past, and I can't stop them if I can't see them.
-
After update iOS 5.1 iPhone 4 camera on lock screen doesn't open the app
After update iOS 5.1 iPhone 4 camera on lock screen doesn't open the app
Tonebox,
I couldn't get my camera to work smoothly
the 1st ten times,or so,I tried to open it.
As it turns out,it isn't as pressure sensitive as I have
grown accustomed to, and required a gesture that feels
rather awkward, by comparison to the ones I have been using. -
why can't i connect to my iphone after updating to 7.1.1? i don't even get the screen that lets me login into my apple account??? plz help my phone was stolen and through help of the police i recovered it and now i can't access my phone
You must have had find my iPhone on, or it was locked by your phone carrier.
Call your our cell carrier first.
then log on to a computer to iCloud to erase your iPhone.
NOW... You will be able to setup with a backup. -
I've been using samsung for a long time and I just changed into an iPhone 5s and the most important thing I need is my calendar appointments , but in the notification center it doesn't show my events for tomorrow and it doesn't even show more than 1 event , will there be an updated or this soon? Or should I just shift back to samsung?????
Go to settings/notification centre and make sure today vie and calendar day view are both on
-
Can't access App Store after update to os6 on iPhone 3GS any ideas?
Can't load App Store or iTunes after updating to os6 using iPhone 3GS can access using ipad2 so not sure it's a high volume problem. Anyone having the same problem and found a fix. Thanks
Thanks Apple Support. Problem was wifi related. Required forgetting the network resetting the router and re- establishing the connection. If anyone has the same symptoms. Apparently has happened before
-
After updating to IOS 6.0.1 I cannot copy photos from the iPhoto library to the iPhone. The events appear correctly but the photo count in all the Events is 0
Same problem here, and it's not isolated.
https://discussions.apple.com/message/20228281#20228281
I believe you will find you can again sync Photos if you delete the "iPod Photo Cache", but predict that any subsequent attempt will fail. In my case, the enxt sync removes all the photos again - I've seen other reports of error messages upon sync. Mine just fails silently. :-) -
Hi after trying to update my iPhone 5s while connected to iTunes on the Mac I got a notice saying it could not update the phone (error message: (-1)). Any idea what this error message means? Is it a space issue?
Resolve iOS update and restore errors
-
I have iPhone 5s. After updating to 8.0.2 , it freezes often when i cut the call... happened 7 times ... had to switch off every time .... what to do?????? help....
Hi there SraZamora,
The troubouleshooting steps in the article below can be helpful when troubleshooting unresponsive devices.
iOS: Not responding or does not turn on
-Griff W. -
After updating to iOS8 my iPhone and iPads no longer autofill name and passwords
After updating to iOS8 my iPhone and iPads no longer autofill name and passwords
It worked fine in iOS7, it still works fine on an older iPhone 4 running 7 and an iPad Air also running 7. Also my Macs, an old MacPro 10.7.5 and a MacBook Air 10.9.5 work great, autofilling every time.
This is what Safari settings look like:
All the password info is still there under Saved Passwords.
I have tried turning Names and passwords off and on but no luck
What should I do?I can get autofill to work but it will only remember my last username and password used for the site rather then letting me start typing a username and then suggesting one and its password being automatically filled in if I hit space while the suggested username was showing or when i finished typing the username (how it worked in iOS 7). I'm having zero issues using iCloud keychain on my MacBook pro running Yosemite so I'm not sure if apple accidentally removed this functionality or if there is something I can do to get it back? I have keychain turned on as well as autofill passwords and when I go into the settings I can see all the accounts and passwords for this particular site so I know they're saved..very odd behavior. If no fix I'll just start adding them all to one password but this seems cumbersome considering safari has this feature built in.
Maybe you are looking for
-
How do I edit credit card details on iPad
-
Message splitting in BPM ?
Hi Guys, I have a proxy-soap scenario and i am using BPM to handle the asynchr-synchronus messages. The request coming into xi has multiple transactions in a single xml file and i need to split them into individual transacrions. I have created a mult
-
PDF Document Won't Appear in Share Folder
When attempting to save the document to a network share folder of her choosing, the PDF document is not in the folder. User is saving the pdf from a loan system. To trouble shoot I saved a txtx file and it did appear in the shared folder - any though
-
Set in Excel using ORDER MDX statement not showing correct results on PowerPivot model
I have defined a set in Excel 2013 with this syntax: order(Topcount([Company].[Company].[Company].members, 10, [Measures].[Sum of TotalValue]),[Measures].[Sum of TotalValue] ,DESC) The order statements is not properly Applied. Order by name is still
-
DB13 full database online tape backup error
Dear all Experts I am trying to take online backup of newly installed ECC development system with AIX6.1,Oracle 11g,tape inserted and Initialized successfully in DB13 ,but I have tried to fire the backup of online backup i am getting error please f