After updating to 8.1, problems with starting video's

Hello. I have a new question. After updating a Pavilion 15 Notebook PC from 8.0 to 8.1, and having installed numerous, mostly, security-updates, my computer started having problems. When I want to play a video on, for example, Utube, it has difficulties openig the video's. Also when I'm playing a Solitairegame, the sounds don't correspond with the images anymore. Before I never had an issue with these things. Am really unhappy with it. People warned me that updating could bring trouble, and it seems it has started. Can anybody help me with these issues? Please remember, you're talking to an absolute ignorant person, when it comes to computers. Thamk you very much for your time and help! Makkes

Makkes
Have you run the Windows 8.1 upgrade assistant & checked if there are no compatibility problems before going in for upgrade.
http://windows.microsoft.com/en-in/windows-8/upgrade-assistant-download-online-faq
Have you checked in your HP support site if there are drivers available for 8.1 for your system beforehand.
BTW, what is your model name, product number, pre installed operating system?
http://h10025.www1.hp.com/ewfrf/wc/document?cc=in&lc=en&docname=c00033108
Which is the browser you're using?
Have you updated your browser to the latest version available?
http://pcsupport.about.com/od/browsers/f/update-internet-explorer.htm
Please reply to the above queries specifically & may be David or if I can, would try helping you out further to resolve your issue.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Similar Messages

HT5262 I update to IOS 6.1.3 in my Iphone 4S and don't saved SHSH an APtickets, after it I experiment a problems with my Idevice, it show service provider but don't show signal in any place,I want to know if its posible repair my device

I update to IOS 6.1.3 in my Iphone 4S and don't saved SHSH an APtickets, after it I experiment a problems with my Idevice, it show service provider but don't show signal in any place,I want to know if its posible repair my device

anduran wrote:
I update to IOS 6.1.3 in my Iphone 4S and don't saved SHSH an APtickets, after it I experiment a problems with my Idevice, it show service provider but don't show signal in any place,I want to know if its posible repair my device
Basic troubleshooting
Reset
Restore with back up and if required as new

After years of never a problem with lightroom started with lightroom 5 yesterday and today all of a

After years of never a problem with lightroom, yesterday i started wiith Lightroom 5 and today all of a sudden in development mode everything just stopped working. No matter what I do none of the sliders have any effect on the picture whatsoever.
Please help Duncan

you'll need both serial numbers to install the lr 5 upgrade.
if you purchased and downloaded lr 4 from adobe or registered with adobe, you may be able to find your lr 4 serial number under the account used to make that purchase/registration (not necessarily your current adobe id), Adobe ID
and adobe support may be able to help you, contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

After updating to the new ios5 with my 4S , no wifi connection (at home), problem when sending or receiving email

After updating to the new ios5 with my 4S, no wifi connection and problem when sending or receiving email. I had no issue before the update... I am very disappointed

Did you already try to reset your network settings in Settings/General/Reset?

Is it somebody Except for me Who has problems With waching videos on ipad after the 5.0.1 update

Is it somebody Except for me Who has problems With waching videos on ipad after the 5.0.1 update

Hi,
yes I have big problems as soon as I open the video app i get a total black screen, even the upper bar with the time disappears. I already tried to:
1. closing the app and reopen it
2. restart the iPad
3. restore the iPad via iTunes
4. Begging the app to work again.

Problem with starting Windows when W510 in docking station

When I put in my W510 to the docking station, I have usually every second day problems with starting up Windows operation system.
I make 2 videos, where on the first 100_1060.MOV you can see starting Windows when it is frozen (first 1 minute record, I start record after about 3 minutes frozen), then I have to reboot W510 by on/off button and start ThinkVantage.
On the second video 100_1061.MOV is starting operating system after ThinkVantage process, this start is OK.
http://www.licko.cz/w510/100_1060.MOV
http://www.licko.cz/w510/100_1061.MOV
Why I have this problems? I have latest Windows and W510 updates.
Regards,
Lubomir Licko
Solved!
Go to Solution.

There was some upgrades of Microsoft and Lenovo and I don't have this problem long time.

Problem with starting more than one SwingWorker

Hello
I wonder if anyone could tell me if there are known problems with starting more than one SwingWorker thread at once?
In response to an action the user performs, I need to obtain several lists of things from the server. This includes a couple of server-calls, and I want to do the server calls in a thread outside the awt-event thread. So I start a couple of SwingWorker-threads. This works fine sometimes, but not always. Sometimes code in some of the SwingWorkers finished method does not update the ui. I can see that the correct calls are made, but the ui is still not updated correctly. The problem seems to be related to the sequence of when the different thread are finished. For instance, if the sequence is like this:
SwingWorker1.construct
SwingWorker2.construct
SwingWorker1.finished
SwingWorker2.finished
Things go fine, but if the sequence is:
SwingWorker1.construct
SwingWorker1.finished
SwingWorker2.construct
SwingWorker2.finished
the ui-updates in SwingWorker1.finished is not done correctly.
Can anyone help me with this?

This is the point:
In one SwingWorker thread you have 1 construct method, and 1 finish method - which are both invoked once.
Therefore you only have one opportunity to update the gui in that thread. This forces you to use many threads if you want regular updates, which I try to avoid.
Therefore, the solution!
Have a loop in the construct method that executes the algorithm accordingly, updating the gui accordingly at regular times, maintaining just the 1 thread - becomes easier and nicer for the programmer and the JVM.
The finish method in this case is to update the gui when all iterations are finished.
There is nothing wrong with this. Just because you have a finish method that is called in the event-dispatching thread doesn't mean that all your update code must be in there.
What you MUST ensure is that ALL your update code is executed in the event-dispatching thread, that is the most important thing. After all, SwingWorker is just a helper class, not the gospel template of how to update a gui.

After iphoto 9.1.5. problem with editing photos

After I did the 9.1.5. update I have a problem with editing photo's. My photo's are about 35mb a piece.. they are panoramic photo's. Editing used to work perfect in iphoto 8.. after I went to iphoto 9 it became buggy.. (it crashes on certain photo's that 8 could handle without a problem).. but I learned to live with it. Now I did the 9.1.5. update and I can edit maybe 2 or 3 pics without a problem.. then when I get to number 4 Iphoto will show me a black screen.
If I close iphoto and start it again, I can continue where I left off.. untill I get to a picture that seems to ruin the party.. and then I have to restart again..
Iphoto 8 used to work so smooth with panoramic photo's.. dont know where it went wrong..

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

SOLMAN 7.0 EHP1 problem with starting SMD instance

Hello everyone, 
i have problem with starting instance SMD in my Solution Manager. After START this instance is status for one-two secend green and then status go to yellow color in SAP Management Console. I dont now where is problem, i try everything, can you help me? 
Here is LOG from dev_SMDAgent 
trc file: "G:\usr\sap\SMD\J98\work\dev_SMDAgent", trc level: 1, release: "701"
node name : smdagent
pid : 1136
system name : SMD
system nr. : 98
started at : Thu Jul 08 14:49:55 2010
arguments :
 arg[00] : G:\usr\sap\SMD\J98\..\exe\jlaunch.exe
 arg[01] : pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
 arg[02] : -DSAPINFO=SMD_98_server
 arg[03] : pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
JStartupReadInstanceProperties: read instance properties [G:\usr\sap\SMD\J98\profile\smd.properties]
-> ms host :
-> ms port : 36
-> OS libs : G:\usr\sap\SMD\J98\..\exe
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : G:\usr\sap\SMD\J98\profile\smd.properties
Instance properties
-> ms host :
-> ms port : 36
-> os libs : G:\usr\sap\SMD\J98\..\exe
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
Worker nodes
-> [00] smdagent : G:\usr\sap\SMD\J98\profile\smd.properties
[Thr 5392] Thu Jul 08 14:49:55 2010
[Thr 5392] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 5392] JLaunchRequestQueueInit: create pipe listener thread
[Thr 2068] JLaunchRequestFunc: Thread 2068 started as listener thread for np messages.
[Thr 220] WaitSyncSemThread: Thread 220 started as semaphore monitor thread.
[Thr 5392] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 5392] CPIC (version=701.2009.01.26)
[Thr 5392] [Node: SMDAgent] java home is set by profile parameter
 Java Home: C:\j2sdk1.4.2_26-x64\
[Thr 5392] JStartupICheckFrameworkPackage: can't find framework package G:\usr\sap\SMD\J98\..\exe\jvmx.jar
JStartupIReadSection: read node properties [smdagent]
-> node name : SMDAgent
-> node type : server
-> node id : 1
-> node execute : yes
-> java path : C:\j2sdk1.4.2_26-x64\
-> java parameters : -DP4ClassLoad=P4Connection
-> java vm version : 1.4.2_26-b03
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 256M
-> init heap size : 256M
-> root path : ..\SMDAgent
-> class path : lib\launcher\smdagentlauncher.jar;..\..\exe\jstartupapi.jar;..\..\exe\jstartupimpl.jar
-> OS libs path : G:\usr\sap\SMD\J98\..\exe
-> main class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : G:\usr\sap\SMD\J98\..\exe\jstartup.jar;G:\usr\sap\SMD\J98\..\exe\jvmx.jar
-> shutdown class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> parameters : run jcontrol
-> debuggable : yes
-> debug mode : no
-> debug port : 58981
-> shutdown timeout : 20000
[Thr 5392] JLaunchISetDebugMode: set debug mode [no]
[Thr 2448] JLaunchIStartFunc: Thread 2448 started as Java VM thread.
[Thr 2448] Thu Jul 08 14:49:56 2010
[Thr 2448] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
 Java Parameters: -Xss2m
JHVM_LoadJavaVM: VM Arguments of node [SMDAgent]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -DP4ClassLoad=P4Connection
-> arg[ 4]: -Dsys.global.dir=G:\usr\sap\SMD\SYS\global
-> arg[ 5]: -Dapplication.home=G:\usr\sap\SMD\J98\..\exe
-> arg[ 6]: -Djava.class.path=G:\usr\sap\SMD\J98\..\exe\jstartup.jar;G:\usr\sap\SMD\J98\..\exe\jvmx.jar;lib\launcher\smdagentlauncher.jar;..\..\exe\jstartupapi.jar;..\..\exe\jstartupimpl.jar
-> arg[ 7]: -Djava.library.path=C:\j2sdk1.4.2_26-x64
jre\bin\server;C:\j2sdk1.4.2_26-x64
jre\bin;C:\j2sdk1.4.2_26-x64
bin;G:\usr\sap\SMD\J98\..\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;G:\usr\sap\SMD\exe
-> arg[ 8]: -Dmemory.manager=256M
-> arg[ 9]: -Xmx256M
-> arg[ 10]: -Xms256M
-> arg[ 11]: -DLoadBalanceRestricted=no
-> arg[ 12]: -Djstartup.mode=JCONTROL
-> arg[ 13]: -Djstartup.ownProcessId=1136
-> arg[ 14]: -Djstartup.ownHardwareId=H1630488451
-> arg[ 15]: -Djstartup.whoami=server
-> arg[ 16]: -Djstartup.debuggable=yes
-> arg[ 17]: -Xss2m
-> arg[ 18]: -DSAPINFO=SMD_98_server
-> arg[ 19]: -DSAPSTARTUP=1
-> arg[ 20]: -DSAPSYSTEM=98
-> arg[ 21]: -DSAPSYSTEMNAME=SMD
-> arg[ 22]: -DSAPMYNAME=SAPVSM01_SMD_98
-> arg[ 23]: -DSAPDBHOST=
-> arg[ 24]: -Dj2ee.dbhost=
[Thr 2448] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [SMDAgent]
-> arg[ 0]: run
-> arg[ 1]: jcontrol
[Thr 2448] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 2448] Thu Jul 08 14:49:57 2010
[Thr 2448] JLaunchISetState: change state from [Initial (0)] to [Initial (0)]
[Thr 2448] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 2448] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 3140] JLaunchIExitJava: exit hook is called (rc = -11112)
[Thr 3140] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 3140] JLaunchCloseProgram: good bye (exitcode = -11112) 
LOG dev_jcontrol 
trc file: "G:\usr\sap\SMD\J98\work\dev_jcontrol", trc level: 1, release: "701"
node name : jcontrol
pid : 840
system name : SMD
system nr. : 98
started at : Thu Jul 08 14:49:53 2010
arguments :
 arg[00] : G:\usr\sap\SMD\J98\..\exe\jcontrol.exe
 arg[01] : pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
JStartupReadInstanceProperties: read instance properties [G:\usr\sap\SMD\J98\profile\smd.properties]
-> ms host :
-> ms port : 36
-> OS libs : G:\usr\sap\SMD\exe
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : G:\usr\sap\SMD\J98\profile\smd.properties
Instance properties
-> ms host :
-> ms port : 36
-> os libs : G:\usr\sap\SMD\exe
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
Worker nodes
-> [00] smdagent : G:\usr\sap\SMD\J98\profile\smd.properties
[Thr 5968] Thu Jul 08 14:49:53 2010
[Thr 5968] *** WARNING => Key profile parameters not set G:\usr\sap\SMD\J98\..\SYS\profile\DEFAULT.PFL:
j2ee/scs/host=
j2ee/scs/system= [jcntrxx.c 1459]
[Thr 5968] *** WARNING => Can't open default profile [G:\usr\sap\SMD\J98\..\SYS\profile\DEFAULT.PFL] for migration [jcntrxx.c 1460]
[Thr 5968] JControlExecuteBootstrap: jcontrol runs in 6.20 compatible mode
[Thr 5968] JControlExecuteBootstrap: jcontrol runs in 6.20 compatible mode
[Thr 5968] JControlIBuildProcessList: Maximum error count is set to 4
[Thr 5968] [Node: SMDAgent] java home is set by profile parameter
 Java Home: C:\j2sdk1.4.2_26-x64\
[Thr 384] JControlRequestFunc: Thread 384 started as listener thread for np messages.
[Thr 5968] Thu Jul 08 14:49:54 2010
[Thr 5968] JStartupICheckFrameworkPackage: can't find framework package G:\usr\sap\SMD\exe\jvmx.jar
JStartupIReadSection: read node properties [smdagent]
-> node name : SMDAgent
-> node type : server
-> node id : 1
-> node execute : yes
-> java path : C:\j2sdk1.4.2_26-x64\
-> java parameters : -DP4ClassLoad=P4Connection
-> java vm version : 1.4.2_26-b03
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 256M
-> init heap size : 256M
-> root path : ..\SMDAgent
-> class path : lib\launcher\smdagentlauncher.jar;..\..\exe\jstartupapi.jar;..\..\exe\jstartupimpl.jar
-> OS libs path : G:\usr\sap\SMD\exe
-> main class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : G:\usr\sap\SMD\exe\jstartup.jar;G:\usr\sap\SMD\exe\jvmx.jar
-> shutdown class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> parameters : run jcontrol
-> debuggable : yes
-> debug mode : no
-> debug port : 58981
-> shutdown timeout : 20000
[Thr 5968] JControlConnectToMS: jcontrol runs in 6.20 compatible mode without message server
JControlStartJLaunch: program = G:\usr\sap\SMD\J98\..\exe\jlaunch.exe
-> arg[00] = G:\usr\sap\SMD\J98\..\exe\jlaunch.exe
-> arg[01] = pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
-> arg[02] = -DSAPINFO=SMD_98_server
-> arg[03] = -nodeId=0
-> arg[04] = -file=G:\usr\sap\SMD\J98\profile\smd.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_840
-> arg[06] = -nodeName=smdagent
-> arg[07] = -jvmOutFile=G:\usr\sap\SMD\J98\work\jvm_SMDAgent.out
-> arg[08] = -stdOutFile=G:\usr\sap\SMD\J98\work\std_SMDAgent.out
-> arg[09] = -locOutFile=G:\usr\sap\SMD\J98\work\dev_SMDAgent
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
-> lib path = PATH=C:\j2sdk1.4.2_26-x64
jre\bin\server;C:\j2sdk1.4.2_26-x64
jre\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;G:\usr\sap\SMD\exe
-> exe path = PATH=C:\j2sdk1.4.2_26-x64
bin;G:\usr\sap\SMD\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;G:\usr\sap\SMD\exe
[Thr 5968] JControlICheckProcessList: process SMDAgent started (PID:1136)
[Thr 5968] Thu Jul 08 14:49:59 2010
[Thr 5968] JControlICheckProcessList: process SMDAgent (pid:1136) died (RUN-FLAG)
[Thr 5968] JControlIResetProcess: reset process SMDAgent
[Thr 5968] JControlIResetProcess: [SMDAgent] not running -> increase error count (1)
[Thr 5968] JControlICheckProcessList: shutdown node from console -> restart off
THANKS FOR RESPONSE

Hi Martin,
Check note 940893 (If this is not done already )
Regards
Tobias

Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application

Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer.

After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 4
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit
Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Since updating Firefox I have problems with playing Zynga games

since updating Firefox I have problems with the Zynga games I am playing. The functions often stop working so I have to reboot the game. Also there are often a lot of items missing on my screen so I can't play at all

I have this problem, as well, since the upgrade to 4.0.1. After the upgrade, I found several 'Recovered Files' in my Trash. On taking a look, they all had to do with the Crowdstar app. Happy Aquarium, I believe, but there are several folders of them. Some of them could have to do with Zynga's FarmVille.
However, after repeated problems, I installed Chrome 10. to see if the Facebook apps. would work. They did, without problems. That tells me the folders in Trash shouldn't have anything to do with whether they operate or not but it has something to do with something Firefox has done, or not done, with this upgrade. Frankly, I'm baffled and more than a little annoyed. :/
However, thinking back to the upgrade, it happened suddenly while I was on the phone with AppleCare on another matter. It was they who suggested I needed to upgrade my browser and I did it immediately, on-the-spot. It wasn't what you would call a 'clean install' because I was on the phone but also online with AppleCare. The process went so fast, I remember there were things about the installation that didn't quite seem right and I do remember that the earlier version of Firefox was not removed prior to the upgrade. Is there any chance something could be out-of whack because of this? If so, I need to know how to save my passwords, bookmarks, profile, and any other critical info that would need to be transferred.

I have problem with starting up my Mac Pro ?

Dear ,
I'have a problem with starting up my Mac Pro , please advice me how to start it

This may help.
http://support.apple.com/kb/TS1365
Note: Steps 5 and 6
Step 5
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

After updating to ios 7.1 with my iphone 4 my apps wont update it just loads then stop help please

after updating to ios 7.1 with my iphone 4 my apps wont update it just loads then stop help please

Reset your iPhone. Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.
If you continue to have issues, try downloading the apps to iTunes on your computer, then sync your iPhone using iTunes.

After upgraded ios6 i got problem with whatapp. "last seen" function is not working

HI eveyone
after upgraded ios6 i got problem with whatapp. "last seen" function is not working .. it's doest show last seen who enter the chat . is anyone have the same problem .. i even restore and reinstall to my ph but it's not work .. if someone know how to fix it, plz tell me how to do .. thanks

Also, when I check this post several times a day, I always see warning 'Connection is untrust'. If I close browser and reopen immediately everything is ok.

After updating to 8.1, problems with starting video's

Similar Messages

Maybe you are looking for