After updating to iOS 8.3 on my iPhone 6, Blu Logic bluetooth calls with a charging phone in my car do not go through the car's speakers. Siri's message now adds, "....calling _______on speaker."
Blu Logic bluetooth calls using "Hey, Sir" do not go through my car's speakers since updating to iOS 8.3. They are routed through the iPhone 6 speaker after Siri says, "....calling ________ on speaker." The "on speaker" term was never used before. The Blu Logic bluetooth unit is an aftermarket device installed in a 2005 Buick LaCrosse. It worked perfectly until the iOS 8.3 update.
OldGnome:
Blu Logic seems to keep a virtually invisible support presence on the internet. I did return to the aftermarket installer of the unit. He told me pretty much the same as you. Apple expects the equip. manufacturers to keep up with iOS. It's a bit of a Catch-22. Perhaps iOS 9 will exterminate the bugs!!
In the meantime, the only thing I've really lost is hands-free dialing for bluetooth calls in my car.
Similar Messages
-
after update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call
It is not practicale to do this always any one faces the same problemThere may be a problem with the SIM card. Get a new SIM card from your carrier - there should be no charge for a replacement.
If no change with a new SIM card, the standard troubleshooting steps in order are:
Power your iPhone off and on.
An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPhone with iTunes from your iPhone's backup.
Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
If no change after any of these steps in order, your iPhone has a hardware problem. -
After updating to iOS 5.0.1 my iphone 4 is frozen on the screen with the apple logo and the progress bar under it. Held the power and home button, the phone shut off, and restarted the progress. If i try to turn the phone on, it keeps telling me to connect to iTunes. Once I do, it asks me to restore, i click restore, but it keeps on freezing at the screen. What is the problem? Error 1603 comes up. Followed the link to apple's page but nothing that was said there worked.
See Here for
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
I lost safari from home screen and settings after updating to iOS 7.0.2 on Iphone 5
Lost safari from home screen and settings after updating to iOS 7.0.2 on Iphone 5
Settings > General > Reset > Reset Home Screen Layout
If no joy, check whether you have Restrictions set. -
HT201394 Loss of cellular service after updating to iOS 8.0.2 on iPhone 5s
Loss of cellular service after updating to iOS 8.0.2 on iPhone 5s
Hello there, Lonlybird2009.
The following Knowledge Base article offers up some practical steps for troubleshooting cellular connection issues on your iOS device:
iPhone cellular data connection issues
http://support.apple.com/kb/ts3780
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
after updating to iOS 6.0.1 my iphone 3s won't recognize my SIM card. i updated my phone through iTunes, what happened to my phone?
If it now says "invalid" or "unsupported" SIM, your iPhone was almost certainly hacked to unlock it from the original cell carrier and updating has now removed that hack and the iPhone has relocked back to that original carrier. You will have to contact that carrier and ask if it would be possible to get your iPhone officially unlocked.
Regards. -
After updating to ios 7.0.4 my iPhone will not sync to my ford explorer
After updating to ios 7.0.4 my iPhone 4s will not sync to my ford explorer
Syncs to my focus.
Might have to try a time or 2. -
My iPhone 5 keep rebooting itself after update to iOS 8? My friends iphone 5 is doing it too...already reset the phone and the problem till happen.
What at can I do to fix the problem???Hello there, Fernandox26.
The following Knowledge Base article offers up some great steps for troubleshooting isues with unexpected power issues with your iOS device:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
model: iphone 4s (MD235J/A)
VERSION:8.3 (12F70)
Problem: after updating to ios 8.3 and restarting my phone it wont show cellular service.(no service)Confirmed solution from Apple:
You need to do a full OS restore through iTunes on your phone. You can then restore from an iCloud or iTunes backup to be back in business. It *****, but that's the only solution right now. -
Purchased ringtones disappeared after update to IOS 8.1.1 on iPhone 5c
Hello,
could someone help me? I purchased some ringtones from store a week ago, but after update to IOS 8.1.1 all bought songs disappeared from my iPhone 5c.
The songs I bought before I visit in store and I can bought and pay it again. Where is the problem?
Thank you.I have same issue. I have done the checklist from iMore website -- all techniques do not work. I followed the steps, but the "remove and sync" does not appear. I also did "restore from backup"; still did not work. The ringtones were NOT restored on my iPhone 6 (iOS 8.1.1).
Apple will have to do another update to fix this issue and refund the purchase. -
Wi-fi problem after update to IOS 7.0.3 on iPhone 4S
Like many people, Wi-Fi has stopped working on my iPhone after updating to IOS 7.0.3.
I can make working Wi-fi after cooling my iPhone few minutes on the refregirator!
With IOS 6, there were no problems.
What can I do to fix it.It is Alain220 again.
You can see the problem from many users from the web sites:
http://iphoneaddict.fr/post/news-90130-ios-7-problemes-wi-fi-liphone-4s
http://iphonetweak.fr/2013/10/11/problemes-de-wi-fi-avec-l-iphone-4s-sous-ios-7
Sorry, those sites are French language -
After updating to IOS 7.0.6 my iPhone 5 wont connect to my car stereo.
Last night i happily listened to my iPhone through my car stereo, got home, updated to the new IOS 7.0.6 and went to bed.
Having got into my car this morning, i plugged in my phone to find that it would not connect and the car stereo just kept searching. I tried unplugging, waiting a while, turning the adaptet round, waititng again juste in case the connection wasnt good but to no joy. All i can put it down to is the update...
Any help Apple????My problem exactly! With Iphone 4! The updated phone will not connect, the other Iphone 4 not running this latest update works fine! Come on Apple!! Need a fix yesterday!
-
After updating to iOS 8.0.2 my iPhone won't vibrate
Hi,
After I updated to iOS 8.0.2, vibration completely stopped working on my iPhone 6 16GB.
It does not work for messages, notifications, calls, when I plug in the charger, with or without silent mode, etc.
Some solutions I've tried:
I've checked settings, they are correct (do not disturb is off!).
I tried to make a custom vibration pattern, didn't manage to get the phone to vibrate...
I restored the phone in iTunes. I checked if vibration worked while setting up the phone, before the backup of my settings and apps began transferring; still didn't work.
Any ideas?So yesterday vibration suddenly started working again, after nearly two weeks with the problem above. I have no idea why, I didn't change any settings and the only app that was updated yesterday was Facebook messenger...
-
After updating to iOS 8.0.1, my iphone 6 shows "No Service"
After updating my iphone 6 to iOS 8.0.1.1, I can't connect to ATT cell tower and my phone shows "No Service". I tried to reboot phone, turn on/off airplane mode, take in/out of SIM card. But none of these helped.
Has anyone experience this issue??Confirmed solution from Apple:
You need to do a full OS restore through iTunes on your phone. You can then restore from an iCloud or iTunes backup to be back in business. It *****, but that's the only solution right now. -
I can turn the iPhone off by holding down the power button and releasing when i see the blue screen. I have tried to restore the iPhone in iTunes by putting it into recovery mode, but after about 10-20 minutes of it restoring the iPhone suddenly looses connection with the computer and goes back into the loop process. What should i do?
Hello Simmo1997,
Sorry to hear about your issue but let’s see if we can get your iPhone back up in running. If your iPhone is disconnecting when trying to restore then check out the article below to get you started with isolating the issue. Let me know if it gets resolved or if you discover a new symptom.
iTunes: Resolve USB-related alerts
http://support.apple.com/kb/HT5772
Regards,
-Norm G.
Maybe you are looking for
-
SOAP - HTTP 401 Unauthorised error
Hi, THe scenario is FILE - XI - WEB SERVICE. My SOAP receiver communication channel throws the following error: "Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unaut
-
Can anyone put some light on this issue.
When transferring PO idocs from R/3 to the middleware, some idocs doesn't reach the destination due to one buyers address segment not getting populated. Since this segment contains the address where it needs to to sent is missing, the idocs does not
-
iBook G3, mac osx 10.3.9, how to convert dvd to mp4? the handbrake 0.7 "qiut" when i double click the icon. why????
-
Exception CX_HRASR00_PROCESS_MODELLING in Workflow :HCM Process and Forms
Hi , I used standard task TS17900110 to import form parameters to workflow container. But at run time it throws one error. "An exception with the type CX_HRASR00_PROCESS_MODELLING occurred, but was neither handled locally". And I tested the Standar
-
I am running Snow Leopard on a Leopard network. When I access a share through the network and try to edit a file I'm getting the error message, "An attempt to write to this volume failed (MacOS Error code: -61) Other Macs running Leopard on the netwo