After updating to iOS7, my JBL docking station no longer plays music.

IPhone 5, iOS7 JBL docking station no longer plays music, the phone does charge but no music will play through station.  Using Lightning to 30 pin adaptor. Any Ideas on troubleshooting or do I just need to roll back to 6 until this gets fixed?

No roll back
Tried any troubleshooting
Reset
Restore with a backup and if required as new

Similar Messages

  • My Sony icf-cs15ip docking station won't play music ,

    My Sony ICF-CS15iP docking station won't play music from my iPhone 4s which is on iOS 7 but it will play my music from my old iPod touch, can anyone help me with a fix or let me know if I'll just have to get a new docking station, thanks in advance!

    @Gscott1979, I had the same problem with both my ICF-CS15iP docking stations I have and was ready to throw them out the window.
    Finally after almost 2 years using them just as a charging station I found the solution that worked for me.
    And the solution could not be any simpler........ use the reset button on the bottom of the docking station. It is a small hole between the battery latch and the screw next to it. Just a paperclip will do.
    If it does not work, you may also want to check this site
    http://community.sony.com/t5/Other-Products/Sony-Dream-Machine-ICF-CS15iP-does-n ot-play-music-from-iPhone-4/td-p/104557
    Good luck

  • Hi. I have iphone4s 16gig,after update IOS to ver.7.0.2 ,when i play music and rotate in horizontal, show only black screen.

    hi. I have iphone4s 16gig,after update IOS to ver.7.0.2 ,when i play music and rotate in horizontal, show only black screen.

    I am in the same predicament...any resolve?  Other than possibly taking it into the shop?

  • Since upgrading to ios7 my iPhone 4S will no longer play music through docking station, worked fine before upgrade, it's charging but not playing any music at all

    MY phone worked fine with the docking station before upgrading to ios7 now it's not playing music but still charging the phone, anyone have any ideas to what I could do to fix this please?

    Restore your iPhone the updates may have corrupted your iOS installation

  • After updating to ios7 and itunes 11.1 i cant sync music

    After updating my Iphone 4S to ios7, i cant sync my music properly! but Apps are syncing fine.
    I have to put songs in groups of playlists in even so not all playlists are synced and not all the songs in every playlist are synced
    They have a dotted grey circle next to them. I have tried all the options on the symmary tab
    reinstalling itunes, lock-home press on the iphone.
    what should do i do??
    The only thing i havent tried is restoring my iphone as i updated to ios7 over wifi and when i try to download the update on my PC in always stops middle through.

    they want us to get our music executively from Itunes its a conspirocy

  • After update to ioS 7.0.3, Airplay function for playing music with the Home amplifier doesn't work anymore.

    I used to listen to Ipad music on my home video using Airplay function.
    After updating to iOS 7.0.3, the Airplay icon is no more available for choosing local/remote reading.
    Does anybody has an idea?

    So everytime they update there OS I should go and re-read the entire manual, I'm not the only one who had this problem, why was is so hard to find an answer from Apple, why didn't they just say read the manaul,  all I got was bunch of links saying  to make sure your wi-fi is setup correctly, reset yout ipad, they didn't answer the question....

  • After upgrading to iOS 7, my phone will no longer play music through my uconnect car audio, even after re-pairing... any ideas?

    I have a 2012 jeep and my 4s was perfect for playing music from my phone.  After upgrading to iOS 7, the uconnect no longer will play music thru the bluetooth...  The phone works fine and I have re-paired the device to the uconnect, but it still doesn't work.  Any ideas or settings that I can change on the phone?  Uconnect basically says that it is, what it is.. they cant change the settings on the stereo....  HELP!

    In my Sync vehicle, I had to "forget" the SYnc connection in the iPhone Bluetooth settings, then go into the car menu and delete the bluetooth device from the vehicle's system. Once I re-paired from scratch, it has been working fine. Give that a try. If not, try removing the connection from both sides again, then Reset Network Settings from the General Settings before re-pairing.

  • After update from iphoto to photos I can no longer play video by space button

    It was very convenient before to play videos in my iphoto library by simply pressing space. After last update space is only minimizing them. Any idea how to set it up as it was?

    What  happens when you try?

  • JBL docking station "This accessory is not supported by iPod Touch"

    I've had a JBL docking station that was working just fine with my iPod touch for several years and now I'm getting an error that the accessory is not supported.  Does anyone have any idea what I have to revert back to so that I can use my docking station? 

    DId it happens after updation to iOS 5?  You can try the standard fixes:
    - Reset. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod
    However, it could be that the dock is not compatible with iOS 5.  You will have to wait until either Apple or JBL issues a firmware update.
    Downgrading the iOS is not supported by Apple.

  • APPLE DOCKING STATION NO LONGER WORKS WITH TOUCH 3G and 4G after ios 4.2.1

    APPLE DOCKING STATION NO LONGER WORKS WITH TOUCH 3G and 4G after ios 4.2.1 update.
    I have both of these touches. I updated both 3g and 4g to ios 4.2.1 and poof...no docking station support other than charging, no audio and no remote function. My av/cable works with the tv, and the headphone jack still outputs audio, just no auido through the Apple dock and hte remote is dead. I purchased the dock from the apple store last year and it was working with both ipod 3g and 4g grrrrr...
    Is Apple now in the bug trade business?, trade one for another....
    Anyone else have this problem?

    My iPod Touch 3G running 4.2.1 works fine with the Apple docking station.
    Perhaps you have a loose cable somewhere and/or a dead battery in your controller?

  • My wi-fi on my iPhone 4S is not working after updating to ios7 and is a few weeks out of warranty, the Apple store wants me to pay £160 for a new one, are they joking?!

    My wi-fi on my iPhone 4S is not working after updating to ios7 which was working perfectly fine before. It is a few weeks out of warranty now and the Apple store wants me to pay £160 for a new one, are they joking?!

    Hi there Juicy Guava,
    You may find the troubleshooting steps in the article below helpful.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    -Griff W. 

  • After updating with IOS7, i can no longer control the music on my iPhone with my car controls. I have deleted the phone and re-synced it twice????

    After updating with IOS7, i can no longer control the music on my iPhone with my car controls. I have deleted the phone and re-synced it twice????

    Go here: http://www.apple.com/feedback/iphone.html and report it with as much detail as possible.

  • IPod Nano not making good connection with JBL docking station... HELP !!

    I have a JBL docking station for my nano. Actually I have 2. One at home & one at work. The problem that I am having is that when I connect my nano to the docking station I must not be getting a good connection because only one side of the speakers plays unless you push on the nano & apply pressure at which time it will then get full "surround sound". I'm pretty sure it's a problem with the nano port because as stated I have 2 identical JBL docking stations and it does it on both of them. Please help !! Docking is the only was I even use my nano and this is driving me nuts...... Suggestions?

    have you tried to use the Nano's dock adapter that came with your Nano? Please recheck your Nano's box

  • How do I get my apps back on my iPhone after updating to IOS7?

    How do I get my apps back on my iPhone after updating to IOS7?

    down load past purchases
    open app store - click updates- click purchased - select category ie all or not on this device - you will see a list of apps with a cloud and a downward error.  click the cloud and they will download
    see
    http://support.apple.com/kb/HT2519
    Peace, Clyde

  • HT4623 My ipad2 is not restarting after updating to iOS7, I now only get the apple symbol? Please advise what I need to do to get it working again. Thanks.

    My ipad2 is not restarting after updating to iOS7, I now only get the apple symbol? Please advise what I need to do to get it working again. Thanks.

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

Maybe you are looking for

  • How do you get the iPad 1 to play music

    I recently bought an iPad 1. I synced it up w/iTunes on my iMac. For some reason, I can't get any of the music that was synced to play on my iPad?  Do you need to download iTunes or an App to play music on the iPad? Thanks

  • Excell encoding problem in java

    I am trying to access an excell document and read it from my jsp page. I am reading it but in my excell document there are some turkish characters. JSP page converting turkish characters to '?'. I added Turkish encoding code (iso-8859-9) but it did n

  • Text_IO.Fopen

    Hello, I would like to ask, in which directory, does text_io.fopen searches to find the file for opening? for example if I say in a fmb/pll file in a program unit, in_file := Text_IO.Fopen(salary.txt, 'r'); without specifing the whole directory path

  • How to delete installed package on ccm5 .1 tftp

    I'm looking to delete old stuff installed on the CCM tftp. I'm using 5.1.2b. Thanks !

  • Pxi_clk10 missing?

    Hi, I'd like to use the PXI_Clk10 signal to synchronize dsa tasks, as per the shipping example Multi-Device-Sync-AI and AO-Shared Timebase & Trig-DSA.vi The problem is, PXI_Clk10 isn't an available choice from the drop down list of terminals, althoug