After updating to Itunes 8.2.1 Itunes fails to connect to all remote airp.

I have 2 airport express, used as remote speakers. Since the last update, both airport express fail to connect with Itunes. I have checked the firmwares, all have the latest firmwareupdate. My firewall allows connections for itunes. I have reinstalled the firmwares, but nothing helps. I still get the error -15000, -15006 and -3256.
Is there a solution? All worked fine before the newest Itunes Update.

My Airport Express doesn`t disappear anymore from Airport Utility after changing my WLAN Router from WPA2 to WPA.
Then I also followed these steps and everything`s fine again:
http://discussions.apple.com/thread.jspa?messageID=9999160#9999160

Similar Messages

I have iphone3gs current software ver. is 4.2.1 and it cannot update to software version 4.3. Please help me. I tried to restore the settings of my iphone but still no work. im using the current ituned 10.4. Second, I cannot connect to all wifi networks

I have iphone3gs current software ver. is 4.2.1 and it cannot update to software version 4.3. Please help me. I tried to restore the settings of my iphone but still no work. im using the current ituned 10.4. Second, I cannot connect to all wifi networks

But the model no. of my iphone i.e A1303 is of 3GS as clearly mentioned here >> http://support.apple.com/kb/HT3939. Then how its become 3G.

After updating to windows 8.1 my wire less internet connection is getting disconnected intermittently

After updating to windows 8.1 my wire less internet connection is getting disconnected intermittently .I am unable to predict the frequency or time
period this is occurring.But now i am really struggling to use the internet.I have tried my laptop vendor support and Microsoft support both failed to provide a solution.Please help me to resolve.I have installed the Wifi driver from real tek site many times
,but that is not helping.kindly provide me the guidance.
when i searched in internet i am able to see many people are struggling with this same issue .

Hi,
You can refer to this blog, and try to roll back to the older version of network adapter driver to check the results. Other suggestions can also be used to troubleshoot your issue.
Windows 8.1 Wifi showing "limited" or "No Internet Access"
http://blogs.technet.com/b/dennis_schnell/archive/2013/08/31/windows-8-1-wifi-showing-quot-limitied-quot-or-quot-no-internet-access-quot.aspx
Meanwhile, please check with the manufacturer of your router to update the firmware.
If the issue persists, please help to collect following information for further research:
1) Enable RAS Tracing on the client.
- Over an Administrative command prompt.
- C:\> netsh ras set tracing * enabled
2) On the client enable the following log as well:
- Over an Administrative command prompt.
- C:\> netsh trace start scenario=netconnection capture=yes tracefile=c:\net.etl
3) Now, turn off Wireless adapter on the client and Turn it back ON for making it to authenticate. Once it fails to connect to the Wireless network, proceed to the next step.
4) Disable RAS Tracing on the client.
- Over an Administrative command prompt.
- C:\> netsh ras set tracing * disabled
5) On the client disable the following log as well:
- Over an Administrative command prompt.
- C:\> netsh trace stop
6) Please provide the following files:
From the Client:
a) ZIP folder of C:\Windows\Tracing
b) C:\Net.etl and C:\Net.cab
Upload these files in SkyDrive and post back the shared link.
Keep post.
Kate Li
TechNet Community Support

After updating my iphone 3G and my ipodtouch 3G ios5, universal dock and remote control doesn´t work

After updating my iphone 3G and my ipotouch 3G with ios5, the apple remote controls (the white and the aluminium one) doesn´t react when iphone or ipod are docked at the universal dock. The remote controls both still work with my Macbook, therefore it must be a problem with the dock. I have tried to connect both with the dock (Menu + left for 6 seconds) but it doesn´t help. Further the volume control doesn´t react on the iphone and the ipod when they are docked. Neither the one on the touchscreen nor the buttons. The day before the update everything was fine. Anyone any idea?
Thanks!

Look at the previous posts on the right under the heading: "More Like This". I appears that others are having the same problem.

After updating my iPad 2 to iOS 6, I cannot connect to my router. I have turned the router off, left off for a considerable time, turned the iPad off and on, reset the network settings, nothing works. Any other suggestions?

After updating my iPad 2 to iOS 6, I cannot connect to my router. I have turned the router off, left off for a considerable time, turned the iPad off and on, reset the network settings, nothing works. Any other suggestions? It is obvious many others are having similar problems, so the iOS 6 looks like a loser.

I have just upgraded from a 3 to a 4S and now I can't connect to my wifi. I've tried everything, resetting network settings, switching to boot, renewing lease, rebooting, turning off cellular data etc etc. nothing works!! Very frustrating!

Ok, tried message boards everywhere to try and figure this out before having to post a question. Have a 21.5" iMac running Snow Leopard 10.6.8. After updates no wireless capability for ipad or laptop, imac connects fine but nothing else.No widgets work.

Ok, tried message boards everywhere to try and figure this out before having to post a question. Have a 21.5" iMac running Snow Leopard 10.6.8. After updates no wireless capability for ipad or laptop, imac connects fine but nothing else. No dashboard widgets work, Skype won't work. What goes?

Your post is pretty lengthy and I have to admit I didn't read it all. Please try restarting in Safe Mode, if that doesn't work please do both a SMC and PRAM reset. These may take 2-3 attempts.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

HT4759 After updating I can no longer see iTunes or iBooks, what do I do to see them again?

After updating iOS, now I can't see the iTunes app or iBooks. The buttons are still there, but when you click on it, it comes up blank. How do I get it back?

Try this
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute).

After updating OS to 10.9.3 iTunes can't see my iPhone over Wi-Fi.

After updating OS on my Retina MacBook Pro to Mavericks 10.9.3 with iTunes 11.2 I succesfully transfer one album over Wi-Fi to my iPhone 5 with iOS 7.1.1.
Then I decided to transfer another, but when I drop the albums to iPhone on my iTunes,
iTunes start to Looking for iPhone and the phone dissapeard.
I tried to restarting the iTunes and the problem was same. First I saw iPhone connected but when tried to transfer music it dissapeard same way.
I tryed to restart my MacBook but from there can't see my iPhone anymore.
I checked that the MBP and iPhone are on same network.
Thanks for any tips.

After a while it start to work.... No problems.

After updating ipod touch to iOS 5 it doesn't connect to itunes (or computer) any more.

After updating my ipod touch 4G to iOS 5 it doesn't connect to itunes (or my computer) at all.
itunes shows an error. I can't turn it on or off either. i can only see the black screen with the apple while it's (aparently) working.
my itunes is the latest version, that shouldn't be the problem.
can anyone help me?!

The updating on the iPod only is a feature of iOS 5. yu first have to connect to your syncing computer and upadate to iOS 5. After that you can do subsequent updating via wifi without a computer.

I Can't access the iTunes music store after updating to the newest version of iTunes

I know this sounds like a newbie question, but I have been using iTunes for over five years now. I recently updated to the newest version of iTunes (10.5 I think) and ever since that I have not been able to access the iTunes store. It has been over a week now and I am really confused. The status bar will just freeze and then it will disappear when I click to go on the store. I have tried reinstalling iTunes and that hasn't worked. Not sure what to do. Thanks for any suggestions.

I've got the same problem, and have reinstalled my entire system and haven't installed any Anti Virus or Spyware programs yet, and still can't get into the stores.
When I wrote last week to tech support they couldn't help me via email, and to me that I might need to go to the fee based support to get this resolved.
Does anyone have a phone number to tech support that's free to get this fixed?

After updating to ios 8 i keep losing my internet connection, and have to restart every time?

After updating my ipad mini to ios 8, i keep losing my internet connection and have to restart.

Hi Turn Router off for 30 seconds Goto Settings Reset Network Settings After reset you need to enter your router wireless key. Also later check on website for a Firmware update for your router. Cheers Brian

After update client and server to Lion Unable to (re)connect to OD server from updated client (Lion)

Hi all,
I'm a bit in the dark here.
All day searching and reading.. but nothing much yet.
After updating the server and a client to OSX Lion, I'm unable to connect to the open directory of the updated server.
The previous config worked very nice for months.
Now it's a bit iritating, cause imho it seems nothing is in place and its a bit hard to find a solution or how to setup / correct the OD Lion server .
Of course i have downloaded the manuals, that state it's all so easy, and I have seen all the movies on the tubers and they also state its so easy.
Well, since I am feeling a big noob now and before my "self value" degrades 2 below 0 I'm asking 4 your help guys...
Can you give me the candle to find the way in the dark?
There are more things that don't work, but save that for later.. ;(
Situation is as follows:
Started to upgrade the Server 1st.
Then tested from the "old client" and all is working reasonably
Then upgraded to the new Lion client also,
and you guessed it right, no way in.
It's a pretty strait up config...
Hope someone can push me in the richt direction..
(hope it's not the push service from apple, arf arf, cause that's one of the other things that is not working yet)

Steps I took upto now:
What I did is go to the client and start the Directory Util, and then select the search config.
Add manually the info of the server.
Then If I type in the IP address, i got the green bulp. But it seems not to work.
When I enter the fqdn, I get the error 2100 could not connect to the ODserver (send by the com.apple.systempreferences)
Because it's an upgrade I deleted then the total contents of the previous settings that where initiated by the "old" setup send by the OD server prev. upgrade.
Then I deleted the kerberos files on the client, and all other things related. connecting to the OD server.
Then I deleted the Machine account on the OD server and back to the client.
Then I created the machine account again from the client manually by going in the OD util on the client.
(connected manually by adding the ip address and then clicking the lock on top of the menu and then after auth succeeded I could see all the rec's and other stuff ..which is a great new feature that you used to do by the
WGM. Now available by the ODutil. Nice.
Okay, after all these steps, I get the feeling it should be able to work, but still the 2100 error.
Somehow it "seems" that the DNS is not responding, but when I get in the terminal, it responds nicely to the pings.!!! And almost everything (not because of faulty DNS) is working.!
So now what?
Any help be appreciated.
(srry 4 typo's /Language. it's a bit late in Europe and not my main Language)

After update in ipad3 to iOS 7.1.1 I have lost all sound and the usual hard reboot, checking settings, etc have not worked. Help!

How can I get my sound back on my ipad3? It has continually lost sound, but before I could do a hard reboot, reset settings, etc and get it back. After updating to iOS 7.1.1 the sound is totally gone and nothing restores it. Anything else I can try?

Hi Mimipat72,
There may be a couple of things that are affecting the sound on your iPad. It sounds like you have already tried restarting and resetting which are good general troubleshooting steps. I suggest first checking in Settings > Sounds and making sure all sounds are turned on. The following article describes these steps.
iOS: Understanding sounds, ringtones, and alerts
http://support.apple.com/kb/HT5800
If the sound settings are correct and you still have no sound, the next thing I would check would be the side switch. The side switch can either be set to lock the rotation of the iPad or mute the sounds. If the side switch is set to Mute, make sure it is toggled to allow sound. If the side switch is set to Lock Rotation, you will need to open the iPad Control Center to make sure sounds are not muted. The following article explains these functions.
iPad: Understanding the side switch
http://support.apple.com/kb/ht4085
Thanks for reaching out,
-Joe

After updated to ios 7.1.1. I cannot connect to my MSN mail, can anyone help?

After updated to IOS 7.1.1, I cannot connect to my MSN mail, can anyone help?

What is the error message you see?

TORCH 9860 FAILED TO CONNECT TO ALL NIGERIA BIS NETWORK AFTER OS UPGRADE

Hello all...............This is a problem which many people are facing in Nigeria and which could negatively affect the fortune of RIM in the country if care is not taken. I did an OS update on desktop manager and since then, i couldnt connect to BIS on any network in Nigeria even though i restore my backup files. The phone works quite well, i could make calls and the network is always 3G but no BIS. I went to the host routing table, and register over and over again to no avail. I took the phone to MTN Nigeria and they couldnt find solution. I downgraded the OS, upgraded it, no BIS. I use BBSAK to wipe the phone and reinstall, no result. The phone is not locked but was bought brand new from a retailing shop called Revive at Ikeja, Lagos Nigeria and they refused to take it back because my warranty of one month has expired (this speaks volume on the type of Blackberry Vendors in Nigeria). I thought if i could get a particular restore called BBservices which was greyed out in my backup maybe i could connect again. This may not be the problem, it may be another and that is why am here begging .......pls help.

man4war wrote:
Please if you know of any tricks to get the BIS working, kindly inform me as am beginning to get desperate.
As I said, I don't know what tricks may have been done specifically for yours. But the usual tricks are to ensure that the APN/TCP settings are correct for your carrier network, followed by extracting the Service Books from a different BB that is properly functioning on your carriers network and then importing those SBs into your BB. But, again, I have no way to know the proper APN/TCP settings for your carrier, and you'd have to gain access to such another functioning BB in order to obtain their Service Books.
But it would be very strange indeed for this BB to have worked so simply the day you received it...perhaps the shop you bought it from had done the tricks?
man4war wrote:
I read in several forums that if one is in a fix like this it is most likely that the BB pin and IMEI has been blacklisted by RIM, please is this so?
Again, no one here has any access to anything to answer that question. That again is a question that can only be answered by your carrier and/or BlackBerry. But there is only one channel for you to seek that answer...via your carrier, who can escalate the question up to BlackBerry if they cannot answer it.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

After updating to Itunes 8.2.1 Itunes fails to connect to all remote airp.

Similar Messages

Maybe you are looking for