After updating to Mavericks, iWork update was unsuccessful.

I updated to mavericks.  An iWork update began as well.  Now the App Store shows that i successfully updated, but it is incorrect.  iWork did not update, but because it shows that it did, I cannot seem to do anything to rectify the situation.  What can I do?
added a few minutes later:
Oops.  By following the links to the right, under ‘more like this’, I found the answer.
Both versions of iWorks are in my applications folder; I had been opening Pages via a link, and therefore was accessing the old version, not realizing that the new one was also available.
I hope I didn’t waste anyone’s time.
Message was edited by: syncprobs

What happened was you never accepted these apps into your Mac App Store account.
Drag & drop the apps in the Trash and use OS X Recovery to install them again. after installing the apps be sure to accept them into your account this time from the Purchases pane of the Mac App Store.
OS X Recovery -
http://support.apple.com/kb/HT4718

Similar Messages

  • HT202157 When I try to update my Apple TV software, I get an error message "update was unsuccessful try again later". I've tried downloading the update for two weeks. Are there any recommendations?

    When I try to update my Apple TV software, I get an error message "update was unsuccessful try again later". I've tried downloading the update for two weeks. Are there any recommendations?

    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • HT4623 I just updated my iphone 5 to the latest update: 6.1.2  After update was complete, I can no longer connect with my local network, apps no longer are transfered to my phone.  I lost all of my apps and music and can't get them from my computer to my

    Has anyone else had trouble with update 6.1.2 for I phone?  After the update, I can't get back on my network (password is correct), ICLOUD doesn't transfer my downloads, nothing seems to work.  It saved my calandar and address book, but lost all of my apps and music (except for a few songs, figure that out) and I can't get them back.  Any suggestions?

    I had this problem post 6.1. Not sure if it was a coincidence, but I'd just recently changed my password after being convinced I'd been hacked, due to being told I was entering my password wrongly, repeatedly by iCloud / iTunes.  It turns out my iCloud account on my Settings -> Mail, Contacts and Calendars was listed as Inactive.  Putting in my details, turning off Contacts over iCloud (thus deleting them) and turning them back on again, repopulated my contacts from iCloud with numbers attached to them.

  • What do I do if the update was unsuccessful- ie the awesome bar is missing?

    I updated to 5.0.1 today, and a whole line is missing.

    Websites may be using autocomplete=off to prevent Firefox from saving and filling autocomplete data.
    You can remove autocomplete=off with a bookmarklet.
    *http://kb.mozillazine.org/User_name_and_password_not_remembered
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Latest Update was unsuccessful

    Below error messagewas shown:
    Adobe Photoshop 13.0.5
    Installation failed. Error Code: U44M1P7

    Hi there -
    Below is a screenshot from the following Adobe help document: Installation failed. Error U44M1P7 | Updates
    For additional help, please refer to the Creative Cloud forum.
    Cheers,
    Kendall

  • Keep getting notification to update to 10.1 MR after update was done

    Hello all,
    this is more of a nuance than a big problem. I updated my Q10 to the latest 10.1 MR (10.1.0.4181) but keep getting a notification in the hub to update. I am ignoring it but it keeps coming back. Any idea why or how to get rid of it?
    Love the device and the software otherwise.
    Cheers!

    It appears your issue could be related to the deletion of the Rogers applications. Please follow the below steps in order to help confirm the issue you are having.
    1. Check for updates (Settings > Software Updates > Check for Updates) or open the Software Update notification in the BlackBerry Hub, and note the version number.
    2. Minimize the update window by swiping up from the bottom bezel.
    3. On the home screen, swipe down from the top bezel.
    4. Select Settings > About.
    5. Choose OS from the Category drop-down.
    6. Note the Software Release number.
    7. If the version numbers from Step 1 and Step 6 match, the update may only be intended to install deleted applications and can be ignored. If the numbers differ, please proceed with the update.
    Goose947
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click Accept as Solution for posts that have solved your issue(s)!

  • Galaxy s6 edge keeps restarting itself after update was installing

    
    see post 4 please.  They are stuck in bootloops......

    Maverick12 wrote:
    it keeps turning on and off but wont show my display screen at allHey ,  Thanks for your post! That sounds pretty frustrating, but we would like to help. First, we would like to gather a bit more information from you. Can you confirm you have an SM-G925A (Settings>About Device)? On that same page, can you provide us with your Baseband number? Has there been any physical or liquid damage? What happens when the phone is plugged in? When did this start happening? Let's start with a Soft Reset. This will restart your phone. You can do that by pressing and holding the volume down and power button for 7-10 seconds. Keep us posted on how that goes,  Thanks,  Les with Samsung Support

  • IPod Not Recognized by PC After Update 2006-03-23

    This is so frustrating- I was having sync lapses with iTunes, and the PC would "freeze" with the iPod connected to it, before Updater 2006-03-23 was run. After Updater was run, now the PC does not recognize the iPod at all. In fact, Updater 2006-03-23 does not even recognize the iPod. (It always asks to connect my iPod or says "Cannot mount iPod.") Assistance with this would be appreciated.
    iPod Video 30GB   Windows XP  

    Hi Todd,
    Welcome to Apple Discussions
    You may want to look at Knowledge Base Document #61711 on iPod missing in "My Computer" or in iTunes on Windows and Knowledge Base Document #93499 on Windows confuses iPod with network drive and may keep iPod from mounting or songs may seem to disappear.
    Jon
    Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more...  Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

  • After updating, Firefox won't connect to the internet. All websites timeout. Internet explorer works fine.

    I started up my computer and opened up firefox. A box popped up that said firefox was updating. After updating was complete, firefox attempted to connect to my homepage, yahoo, but the connection timed out. I tried connecting to other websites and they also timed out. My internet connection is good because internet explorer works fine.

    Common cause after upgrading/updating is that your security software (firewall) may not recognize the new version and may be blocking Firefox and/or plugin-container. Remove all permissions for Firefox and plugin-container from your firewall's programs permissions list, then start Firefox and go to any website and let it detect and set internet access permissions.
    *See [https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Cannot connect after upgrading Firefox]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • Doesnt switch on after update to 10.3.1

    after update was completed the battery was drained full and it doesnt switch on and it shows a bettery symbol with a cut on it

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs. If it fails, please try again but increase the wait time in step 4 to 2 hours, and perhaps as long as 4-5 hours.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
    It is also possible that the OS update was somehow corrupt. Due to the number of problems with "upgrading" to this OS level, I suggest you try the very clean and very forceful AutoLoader OS Reload:
    http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
    Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
    You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Why does my Apple TV take 3 hours to update, only to tell me, "The update was not successful?"

    My Apple TV takes forever to update, an then tells me "The update was unsuccessful." What can I do? It's connected to my network via Ethernet.

    Slow Internet connection is one possibility.

  • I had access to Revel and when I started the update, I received a message that the update was unavailable. Then I no longer had access to my previous icon or pictures.

    WHat do I need to do to get access to Revel? I had it and then when I tried to update I received the message that the update was unsuccessful. Then I did not have access to my previous icon and pictures.

    We are aware of the installation issues people are experiencing when trying to upgrade to Revel iOS version 2.3.2 and have been working closely with Apple to resolve the issue as soon as possible. We apologize for the inconvenience this may have caused you. We have resubmitted an update to the app store and are currently waiting for app approval from Apple.Users can access photos on adoberevel.com on your iOS device or any other device or computer, and from our mac, win8, and android apps.
    Pattie

  • Satellite A350-12J BIOS Faliure after update.

    Hi everyone.
    I own Toshiba Satellite A350-12J (it's PSALME series). Recently I got message in Toshiba Tempro, that said I should update my BIOS, so I decided to do it. I downloaded proprer version from Toshiba site, which was 1.5 and follow the instructions of update(I'd like to mention here, that it's not my first BIOS update). After update was done ma notebook restarted and didn't boot up again. The screen is black all the time.
    When I try turn it on fan works for a few seconds and then goes down, there is some activity in USB devices and DVD but it's only for few seconds and then nothing.
    Oh, almost forgot HDD works too. I've read that in the Phoenix based BIOSes there is something called Crisis Recovery, so I tried it, laptop boots up in this mode( I can tell, becasue in tis mode fan goes up to max rpm and system tries boot from USB Floppy).
    I've tried Crisis Revovery in many combinations and during the process it seems like it's reflashing my BIOS( Floppy whith crisis recovery disk is read for about 2-3 minutes), but after I wait and give it time to reflash(about 10-15 minutes each time) notebook stiil doesn't boot up.
    I think maybe this version of BIOS(1.5) is bad or something. Maybe Somone have original BIOS for this laptop, I'd be very thankful for such BIOS or maybe someone has any idea what's wrong whit it.
    In case someone had original BIOS and was kind enough to send it to me, here is ma email:
    [email protected]
    I' sorry for my English it's not my native language.

    Hi
    > I own Toshiba Satellite A350-12J (it's PSALME series).
    Its NOT PSALME series but PSALWE series!!!
    >I decided to do it. I downloaded proper version from Toshiba site, which was 1.5
    On the Toshiba European page I can find the BIOS update version v2.10
    However, there is only one real solution;
    You should get in contact with the ASP in your country in order to solve this issue.

  • Late 2007 15" MBP Very slow after upgrading to Mavericks

    Hi guys,
    this is my first post here. I look forward to learn and help others.
    The reason of this post is, as outlined in the title, slow paerformance of my computer after upgrading to Mavericks. It was kinda slow from before but this time it's almost unbearable to use it. I used to be able to run VMWare with 2 XP and 1 windows server machines WITH JUST 2 GB OF RAM! Now I have 4 GB and can barely run a single virtual machine with XP and the cooling fans come on just by watching a video on youtube, which also makes performance take a dump.
    These are the specs extracted from EtreCheck:
    Hardware Information:
              MacBook Pro (15-inch  2.4/2.2GHz)
              MacBook Pro - model: MacBookPro3,1
              1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
              4 GB RAM
    Video Information:
              GeForce 8600M GT     - VRAM: 256 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0
              AirPlay: Version: 1.9
              AppleAVBAudio: Version: 2.0.0
              iSightAudio: Version: 7.7.3
    Startup Items:
              DynDNSUpdater - Path: /Library/StartupItems/DynDNSUpdater
    System Software:
              OS X 10.9 (13A603) - Uptime: 6 days 2:7:17
    Disk Information:
              WDC WD5000BEVT-00ZAT0 disk0 : (500.11 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 149.92 GB (76.8 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
                        Storage (disk0s4) /Volumes/Storage: 349.19 GB (54.74 GB free)
    USB Information:
              Apple Inc. Built-in iSight
              Apple Inc. Bluetooth USB Host Controller
              Apple Computer Apple Internal Keyboard / Trackpad
              Apple Computer, Inc. IR Receiver
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
              com.rim.driver.BlackBerryUSBDriverInt          (0.0.74)
              com.globaldelight.driver.BoomDevice          (1.1)
              com.eltima.SyncMate.kext          (0.2.5b15)
              com.vmware.kext.vmci          (90.4.18)
              com.vmware.kext.vsockets          (90.4.23)
              com.vmware.kext.vmnet          (0104.03.86)
              com.vmware.kext.vmx86          (0104.03.86)
              com.vmware.kext.vmioplug.10.1.24          (10.1.24)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.adobe.SwitchBoard.plist
              [invalid] com.bjango.istatmenusdaemon.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] com.rim.BBDaemon.plist
              [loaded] com.synium.cleanappdaemon.plist
              [failed] rapiback.plist
    Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist
              [loaded] com.bjango.istatmenusagent.plist
              [loaded] com.epson.epw.agent.plist
              [loaded] com.rim.BBAlbumArtCacher.plist
              [loaded] com.rim.BBLaunchAgent.plist
              [loaded] net.culater.SIMBL.Agent.plist
              [loaded] org.gpgtools.macgpg2.gpg-agent.plist
              [invalid] org.gpgtools.macgpg2.gpg-agent.plist.plist
              [failed] syncmateStarter.plist
    User Launch Agents:
              [loaded] com.google.keystone.agent.plist
              [loaded] com.spotify.webhelper.plist
              [loaded] com.valvesoftware.steamclean.plist
    User Login Items:
              Boom
              Flux
              iTunesHelper
              Dropbox
              Cinch
    3rd Party Preference Panes:
              Application Enhancer
              Box Sync
              Flash Player
              Flip4Mac WMV
              FUSE for OS X (OSXFUSE)
              GPGPreferences
              Perian
    Internet Plug-ins:
              Default Browser.plugin
              DirectorShockwave.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              Flip4Mac WMV Plugin.plugin
              Google Earth Web Plug-in.plugin
              JavaAppletPlugin.plugin
              MeetingJoinPlugin.plugin
              QuickTime Plugin.plugin
              SharePointBrowserPlugin.plugin
              Silverlight.plugin
              Unity Web Player.plugin
    User Internet Plug-ins:
    Bad Fonts:
              None
    Time Machine:
              Skip System Files: NO
              Auto backup: NO
              Time Machine not configured!
    Top Processes by CPU:
                  22%          vmware-vmx
                   6%          Google Chrome
                   4%          WindowServer
                   3%          coreaudiod
                   2%          Boom
                   1%          EtreCheck
                   0%          BBLaunchAgent
                   0%          mds_stores
                   0%          CleanApp Daemon
                   0%          mds
    Top Processes by Memory:
              586 MB             vmware-vmx
              135 MB             Finder
              98 MB              Google Chrome
              90 MB              softwareupdated
              74 MB              Dropbox
              66 MB              VMware Fusion
              59 MB              mds_stores
              58 MB              Google Chrome Helper
              53 MB              WindowServer
              45 MB              systemstats
    Virtual Memory Statistics:
              40 MB              Free RAM
              1.18 GB            Active RAM
              1.13 GB            Inactive RAM
              1.07 GB            Wired RAM
              24.09 GB           Page-ins
              645 MB             Page-outs
    I understand it says my RAM is way too low, but hve no idea what's killing it. So far I've disabled and uninstalled all DynDNS items. I just read about Chrome's slow performance for MBP's and plan to switch back to Safari (Firefox made my computer even slower).
    Thanks in advance for any light shed on this.
    Oscar.

    Thank you Kappy, while I was reviewing the log from EtreCheck I noticed the 3rd party preference panes, launchers and daemos. I deleted a few of them and it really helped with system performance. Reading your reply confirms that what I did was the right thing; here is an updated log from EtreCheck:
    Hardware Information:
              MacBook Pro (15-inch  2.4/2.2GHz)
              MacBook Pro - model: MacBookPro3,1
              1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
              4 GB RAM
    Video Information:
              GeForce 8600M GT     - VRAM: 256 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0
              AirPlay: Version: 1.9
              AppleAVBAudio: Version: 2.0.0
              iSightAudio: Version: 7.7.3
    System Software:
              OS X 10.9 (13A603) - Uptime: 0 days 0:22:52
    Disk Information:
              WDC WD5000BEVT-00ZAT0 disk0 : (500.11 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 149.92 GB (77.67 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
                        Storage (disk0s4) /Volumes/Storage: 349.19 GB (54.09 GB free)
    USB Information:
              Apple Inc. Built-in iSight
              Apple Inc. Bluetooth USB Host Controller
              Apple Computer Apple Internal Keyboard / Trackpad
              Apple Computer, Inc. IR Receiver
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
              com.rim.driver.BlackBerryUSBDriverInt          (0.0.74)
              com.globaldelight.driver.BoomDevice          (1.1)
              com.eltima.SyncMate.kext          (0.2.5b15)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.adobe.SwitchBoard.plist
              [invalid] com.bjango.istatmenusdaemon.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] com.rim.BBDaemon.plist
              [loaded] com.synium.cleanappdaemon.plist
    Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist
              [loaded] com.bjango.istatmenusagent.plist
              [loaded] com.epson.epw.agent.plist
              [loaded] com.rim.BBAlbumArtCacher.plist
              [loaded] com.rim.BBLaunchAgent.plist
              [loaded] net.culater.SIMBL.Agent.plist
    User Launch Agents:
              [loaded] com.google.keystone.agent.plist
              [loaded] com.spotify.webhelper.plist
              [loaded] com.valvesoftware.steamclean.plist
    User Login Items:
              Boom
              Flux
              iTunesHelper
              Dropbox
              Cinch
    3rd Party Preference Panes:
              Box Sync
              Flash Player
              Flip4Mac WMV
              FUSE for OS X (OSXFUSE)
              Perian
    Internet Plug-ins:
              Default Browser.plugin
              DirectorShockwave.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              Flip4Mac WMV Plugin.plugin
              Google Earth Web Plug-in.plugin
              JavaAppletPlugin.plugin
              MeetingJoinPlugin.plugin
              QuickTime Plugin.plugin
              SharePointBrowserPlugin.plugin
              Silverlight.plugin
              Unity Web Player.plugin
    User Internet Plug-ins:
    Bad Fonts:
              None
    Time Machine:
              Skip System Files: NO
              Auto backup: NO
              Time Machine not configured!
    Top Processes by CPU:
                   5%          WindowServer
                   4%          coreaudiod
                   3%          com.apple.qtkitserver
                   2%          com.apple.WebKit.WebContent
                   1%          EtreCheck
                   1%          Boom
                   0%          SystemUIServer
                   0%          BBLaunchAgent
                   0%          CleanApp Daemon
                   0%          Safari
    Top Processes by Memory:
              180 MB             com.apple.WebKit.WebContent
              152 MB             com.apple.IconServicesAgent
              119 MB             Safari
              90 MB              mds_stores
              82 MB              com.apple.quicklook.satellite
              78 MB              com.apple.iTunesLibraryService
              66 MB              Dropbox
              57 MB              Finder
              49 MB              Preview
              41 MB              CleanApp Daemon
    Virtual Memory Statistics:
              846 MB             Free RAM
              2.02 GB            Active RAM
              620 MB             Inactive RAM
              561 MB             Wired RAM
              1.22 GB            Page-ins
              0 B                Page-outs
    I was reading about GeekBench in the discusions and decided to give it a go, although I was able to only perform the 32-bit tests, I got 1268 on the single-core score and 2187 for the multi-core score; I don't know how good or bad those numbers are. Wish I had a before and after reading but I read about it too late, when I had already erased several items.
    I will appreciate any further input BEFORE I decide to reinstall the OS from scratch.
    Oscar.

  • Wifi problem with Mac after upgrade to Mavericks

    I just upgraded to Mavericks but something wrong with my wifi.
    i can get internet through LAN link from Airport but not through wifi even i can receive an IP address
    i tried connect to hotspot with my iphone5s and it works.
    Other devices can use wifi just fine through Airport, just not my Mac using Mavericks
    In conclusion,
    Airport should be fine because my other devices works.
    Mac wifi should be fine too because i can connect using hotspot.
    so why it's not working when i connect Mac to Airport?

    I was having problems connecting to Wifi with my Macbook Pro (!2010), after upgrading to Mavericks. I was on the phone repeateadly with AT&T because I have Uverse. Testing everything (channels, signal strength) and had techs come out to check the line, ports, switches, etc. When I hardwired the Mac into the Uverse router, it worked fine. This rulled out any problems with the line in.
    I considered getting a repeater but then I read that repeaters are not really good and it is better to reconfigure a router to act as an access point on the network. Plunked down about $80 for a Belkin AC750 router at Best Buy. In the setup it has an option to set it up as an access point only. Clicked that, connected it to my Motorola NVG510 Uverse modem and then connected to the Belkin router from my Mac. Voila!  It's been a solid 11+ Mbs ever since (my plan maxes at 12Mbs). Connection is still solid and life if good even though it ***** to plunk down another $80 for a second router. But it was worth it just to get rid of the headaches.
    I think the wifi capabilities of the Motorola NVG510 modem are the cause of a lot of problems with AT&T Uverse issues, particularly for Mac owners. I think it was also causing my Airport Expresses to drop occasionally.... Few minutes of music then drop... music drop.... All gone now.
    I don't know if you are on Uverse but if so, I highly recommend configuring a second router as an acces point (it can be any old router you still might have - the setup is just a bit trickier because you have to do it manually).
    Good luck.

Maybe you are looking for

  • [Enhancement in BW]: How to use BaDI : RSU5_SAPI_BADI

    Hi Everybody, Right now, could you kindly please tell me how to i use customer exit but using BADI, particularly for BADI : RSU5_SAPI_BADI. <b>I just wanna use the customer exit on variable (variable user-exit).</b> So far i've tried these steps (mig

  • Exporting InDesign files to Flash, CS5.5

    I exported an InDesign file as a Flash file but in flash it shows up as low res when I preview it or when others preview it. What am I doing wrong? I have never used Flash before. I am working with CS5.5 I exported the file as a SWF file and when a c

  • Help with creating a way to prioritize choices

    Hi everyone. I am trying to create a survey in forms central and am having difficulty with one function. I would like for their to be a list and for respondents to be able to prioritize which items they would like in a future knowledge management sys

  • Group Policy Files Not Being Deployed to UNC Paths

    When attempting to deploy files via Group Policy Preferences, there is a well-known issue wherein you may receive an error to the effect of: 0x80070003 The system cannot find the path specified. This is due to the local system being the security cont

  • Approving Self-Registration request using API

    Hi all As an end user I have created a self registration request using using the method, createRegistrationRequest from utility factory. Now as an approver , i wanted to approve the request. I have updated the Organization name using updateRegistrati