After updating to Mountain Lion, Mail has lost the RSS feeds, the colored marked mails folder, and the notes

After updating to Mountain Lion, Mail has lost the RSS feeds, the colored marked mails folder, and the notes. Where are they?

why did they erase something usefull and easy to use?

Similar Messages

TS3276 hi after updating to Mountain Lion, it becomes difficult to quit Mail, always have to Force Quit. And while Mail is on standby, the fan keeps on running full power, the laptop is hot. Why is this happening?

hi after updating to Mountain Lion, it becomes difficult to quit Mail, always have to Force Quit. And while Mail is on standby, the fan keeps on running full power, the laptop is hot. Why is this happening?

If your computer was hot it wasn't asleep - it either didn't go to sleep or it work up after you put it to sleep. I've seen both things happen. First, read this article and follow the instructions.
1) For the next few days/weeks pay attention to the blinking light on the front of your computer when you close the lid. Don't put the computer into your backpack/case until it begins to blink. Wait a minute or so after it starts to blink to make sure it doesn't stop blinking - the signal it woke back up.
2) having followed the above instructions, if you take the computer out and it is hot again or if you take it out and discover it has powered down (you'll know this because when it starts up the battery will be drained and you'll see a progress bar over a ghostly display that will eventually become normal) immediately start the Console program and perform a search on 'sleep' and then 'wake'. This should bring up all the recent log files about sleep state changes (going to sleep and waking up). You should see one for when you put the computer to sleep and put it away and the next one should be just after you got it out. You'll find at least one though that shouldn't be there. That will tell you when the computer work up (when it shouldn't have) and might give a clue as to why.
One of the whys could be a magnet that is making the computer think the lid has been opened.

After updating to mountain lion, my Safari e-mail thru AT

After updating to mountain lion, my Safari e-mail thru AT&T, doesn't show the select all button at the top of the e-mail list, it is there in Chrome and Firefox. Is this a problem with AT&T's site or are others experiencing this same problem. Also my contacts list has change it's look and you can't select multiple contacts.

Hmmmm,
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   com.apple.phonenumbers
0x00007fff8e0300cb 0x7fff8e02e000 + 8395
1   com.apple.phonenumbers
0x00007fff8e02f50b 0x7fff8e02e000 + 5387
2   com.apple.phonenumbers
0x00007fff8e02f87d PNIsValidPhoneNumberForCountry + 112
Any ideas on your end on this phone number for Country???

After updating to mountain lion, icloud password has not been accepted by system preferences

After updating to mountain lion my icloud password in the system preferences has not been accepted anymore. I already changed the password. Also the new one is not accepted by the system preferences. On iPhone and online everything is fine. Any idea?

I just got off the phone with Apple Support. They say they are having problems with iCloud and this issue should be resolved in 3-4 hours. We'll see......

Option in MAIL to "Add to iPhoto" isn't working after updating to Mountain Lion. Anybody else with this problem or sulution?

Option in MAIL to "Add to iPhoto" isn't working after updating to Mountain Lion. Anybody else with this problem or sulution?

A brief search. Or even glancing at the "more like this" list to the right will show that this is a known problem and there is no current solution. Workaround includ saving to the desktop and importing from there or opening in Quick Look and adding to iPhoto from there
LN

Line 6 tone port gx doesn't work properly after updating to mountain lion, i'm hearing artefacts, how is that possible?

i am using logic 9 and line 6 toneport gx for recording my guitar. on the previous version of OSx everything worked perfect, but now, after updating to mountain lion, i hear noise after i play something. the settings were: input: toneport, output: coreaudio, 44100, buffer 512. now they are the same and i have noise. i've installed the latest drivers for toneport and changed the buffer settings. when the buffer is large, i can play some seconds without the noise but it appears after 15-20 seconds. and when the buffer is small it appears faster. i assume it has to do something with the buffer size but i don't know for sure. any ideas?

I have the same problem after updating to ML. It's unusuable for recording until it gets sorted out.
I think it's a problem at the Line 6 end. They are aware of it, and are working on some patch/fix to address the strange artifact sounds, so hopefully it will be ready soon.
See link - http://line6.com/support/thread/86574

After updating to Mountain lion I am having trouble printing to my wifi Epson printer

After updating to Mountain Lion I am having trouble printing on my wifi Epson Workforce 645. I keep getting an error message and my computer is set in the system prefrences to that printer

What is the error message?
Try resetting the printer queues:
http://support.apple.com/kb/PH11143
This update also clears your "computer name" in Syst Prefs > Sharing, and entering a computer name solves network print issues for many.

After updating to mountain lion on my mac pro I am unable to connect my g-raid

After updating to mountain lion on my mac pro I am unable to connect my g-raid 1T external hard drive using the firewire connection? I have 4 places to plug the firewire into, none work. All ports used to work with Snow leopard?

Try this:
Boot into Safe Mode then restart normally.
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
If this does not work to fix the problem, then:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

I got a macbook pro 13 inch core i5 late 2011 , it came with osx lion and i been using facebook videocalls normaly , now i updated to Mountain lion but when i use facebook video calls in (safari ,chrome ) i see the window box but i only see my self i c

i got a macbook pro 13 inch core i5 late 2011 , it came with osx lion and i been using facebook videocalls normaly , now i updated to Mountain lion
but when i use facebook video calls in (safari ,chrome ) i see the window box but i only see my self i can hear my friends but cant see em, they also can see me and hear me but i just see me and hear them .
any ideas ?

Your wifi problem sounds very much like the problem I had. The wifi would drop out, the icon showed it was still connected. If I turned it off, I couldn't turn it back on. Another user here pointed me to the problem, which was the wifi cable (the flat cable goint from the card to the motherboard). I found it on ebay for $13 and it's been running fine since I replaced it. This is the repair guide for your machine. The part number will be on there if you click the link.
http://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2011+AirPort-Blueto oth+Cable+Replacement/7510

Iphoto wont work after updating to mountain lion

I updated to mountain lion now my iphoto wont work. I tried updating but couldnt find iphoto 9.0 they said I needed. I downloaded and installed iphoto 9.4.2 and it still won't work. It says: your photo library is either in use or has become unreadable. Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this quit iPhoto and then reopen while keeping the option and command keys pressed.
I did that and it still gives me the same message when I try to open.

Try the following:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button,
navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library â Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note: your current library will be left untouched for further attempts at a fix if so desired.
OT

Apple TV icon is not showing on macbook pro after update to Mountain lion

I wanted to try Mirroring from my macbook pro to my tv using the new airplay update from Mountain lion but the icon is not showing after the update.

Welcome to the Apple Community.
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). It also requires the computer to be using wi-fi.

Volume not working after update to mountain lion? cannot figure out how to fix

update to mountain lion today, now cannot listen to itunes, no volume on facetime etc . . . cannot figure out what problem is
Thanks

Hi Al,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

Odd error message that started after update to Mountain Lion

Ever since updating to Mountain Lion, I get this error message every now and then:
Nothing in particular seems to cause it, and there isn't a server to which I'm trying to connect. My computer is a mid 2010 MacBook Pro
Can someone tell me what this means in the first place and how I can fix the problem?
Thanks!

Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

Constant Crashing of iPhoto after updating to Mountain Lion and iPhoto 11

I recently updated to Mountain Lion and also to iPhoto 11. iPhoto crashes constantly. From reading other posts I opened while holding the option key and started a new library. It seemed to work then, but now what do I do to get my old photos?

That is a test and it shows that the application is ok. The problem is with your library. Not to data (the library)
So the next thing is to see if we can fix your library. Go back to your main library and post the first 50 lines of the crash log. Also any error message, recent changes, any other observations that might help
LN

Macbook pro freeces after sleep (after update to mountain lion)

hi,
i got a annoying problem (because it kills one of the macbooks biggest features):
since i updated to mountain lion, the macbook won't come back from sleep mode.
so if i reopen it, the apple-logo appears with a loading bar underneath. when reaching the last bar of the loading bar, nothing happens any more - i have to restart.
i already tried this SMC-reset, but this did not help. bluetooth is not turned on (which i figured out could be a problem).
any ideas?
thx, rainer

These machines were never meant to be "laptops." Not since the late 1990s were Macs truly "laptops" in terms of their heat. As long as nothing else is out of the ordinary, and you aren't being asked in four languages to shut down the machine, just keep it on a cool well ventilated surface that is not made out of felt or cotten, and you should be fine. There numerous pads for notebooks that can cool it down with or without fans. Don't get the iCurve, as the rubber on it can lose its adhesiveness.

After updating to Mountain Lion, Mail has lost the RSS feeds, the colored marked mails folder, and the notes

Similar Messages

Maybe you are looking for