After updating to OS5, my iphone 4 can not send mail using wi fi and 3G.. only 1 or the other. It will not switch servers from using ATT 3G server to then using WiFi
I have called my internet provider, my email server company and AT&T. All my settings are fine and everything was fine before the OS5 upgrade. I can send email using WiFi when I have my email host as the outgoing server and can send email 3G using ATT server only when on 3G. The phone is not switching back and forth servers from wi fi connection to 3G.
Hey there Jachin W.,
It sounds like you are unable to connect to your home Wi-Fi suddenly on 2 different iOS devices. I would be interested to know if the affected phones are able to connect to a different Wi-Fi connection, but barring that I would use the following article to help troubleshoot the devices and the Wi-Fi connection:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
And this section from toward the bottom if needed:
Unable to connect to a Wi-Fi network
Verify that you're attempting to connect to your desired Wi-Fi network.
Make sure you're entering your Wi-Fi password correctly. Passwords may be case sensitive and may contain numbers or special characters.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Thank you for using Apple Support Communities.
All the best,
Sterling
Similar Messages
-
After update 6.1.1 I can't send pictures on iMessage and im on wifi. But if I send the picture as a text message it going through. I sent out several pictures before the update now I can't.
HI,
So you have updated past this point ?
http://support.apple.com/kb/TS5419
There also seems to be no issues listed here.
http://www.apple.com/support/systemstatus/
8:44 pm Friday; April 25, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
After updating to IOS7 on iPhone 4S on a call pads show up and a mute is pressed accidentally while on a call
I noticed that one person stated enabling cookies in Safari settings solved this problem. I too had this issue for about two weeks. Once I enabled all cookies in Safari settings, the little "AGREE" button became available in the lower right hand corner when accepting the new terms and conditions.
Shutting down no app helped me. The only way was to enable cookies in Safari settings through General Settings. -
i have two apple id accounts ,when i used to update application it used to prompt a default id (the old one) and if the application was downloaded using the other id i would cancel and it would prompt the other id but not any more .
it just prompt the old id which im not signed in with im signed in using the new id and when i cancel nothing happens and when i try to update applications separately i have the same problem .
im signed in using the new id
the old one is my wife's so i can't delete it
the problem happens when i update all or each application by its own
using ios 5.0.1 on a iphone 3gs
the applications are downloaded using both the new and old id's
any help will be greatly appreciatedِThese are user-to-user forums, you are not talking to Apple here and they don't monitor these forums - I've asked the hosts to remove yout account ids from your post.
In terms of combining accounts it's not currently possible to do so, nor to copy/transfer content from account to another. -
Updated CC2014 the other day, will not open, crashes everytime. I have OS X 10.9.4 - 3.4 ghz intel cor i7, 16 GB 1333 HHz DDR3, in vain talked on to adobe tech, with no help from Adobe.
This morning, I made a new "customer" and downloaded the "trial version" of CC2014 photoshop. This resulted a working CC2014. I hope Adobe can fix my "real" account which does not work at this time.
Anyone else tried this?
KenI don't think everyone with a Mac is having basic problems with Photoshop 2014.1.
What exact versions do you have in each case? Is your updated version 2014.1, while the "new customer" version is 2014.0? Choose Help - System Info to see.
Sounds like, given your specific system, you may want to try a full clean and reinstall, or maybe a downgrade to 2014.0 until 2014.1.1 or 2014.2 comes out. I think the older versions are available through the Creative Cloud application.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
-Noel -
Does Apple make/sell the new "Apple In-Ear Headphones with Remote and Mic" with a one sided configuration? So that a person that is deaf in one can hear both sides of a stereo recording? Also, since the "other" bud is not necessary/useful...it's removed.
As far as I know, Apple sells no such configuration. However, under Settings > General > Accessability, there is an option to play back audio in monoural mode, which would then play both halves of a stereo mix in each earbud.
Hope that helps. -
My iPad hasn't been backed up and it's displaying the msg but will not let me get rid if the msg so that I can get it backed up. How do I get through this
Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up -
I have recently started downloading video files. I
have downloaded a season of a tv show. The season had
9 episodes. Three downloaded fine and the other 6
will not. When i try to download them i get a message
saying error
-34 The disk you are attempting to use is full.
Remove files and empty recycle bin to create space. I
dont understand why it keeps doing this. I have lots
of space on itunes and my computer is not full
either.What can i do? How can i prevent this? Is
there a problem with my computer? Thank you!have a look at this support article.
-
I have made an imovie on my ipad and for some reason the final edit will not keep. When I open the actual projct to edit, it is the way I want it, but when I look at the actual movie and what loads up to youtube is the version prior to this final fix. I have tried fixing it at least twenty times. The open to edit version has the video the way I want but when I upload it to youtube, its not the version I want to show.
Well, assuming all of the above, Notifications, etc., it just might be time for a visit to the Apple tore genius center for a session with the techs. See if it is a fault in the hardware or just an iOS reinstall is the answer.
One more thing you could try, backup so you have a record of content, then restore to factory conditions be an Erase All Contents and Settings. Then restore from the backup you just made. That has helped some with WiFi problems, may be it would work with your problems.
But with that behavior of another app with problems, the geniuses looks like a less stressful thing to do. -
i need to do sap sd certification ,training for same is very costly from authorised center and i canot afford ,the other way is i do training from unauthorised center and take certification exam in any country where prerequisite is not doing training from authorised center.how good it it to do prepare from unauthorised center and take exam in any country like australia ,US ?please help understand .
Hi Preeti,
please first understand the difference between a subject (your header) and its body line, please never write so long subject matter.
Now coming to your queries , what you thinks being at Australia or US is free of Cost. The first thing is that i don't understand your mission for taking Certifications, Are you a working proffesional because for more than 2 yrs. of working experience, you don't need any training , you can take direct examinations.
And if you are not a working professional, i don't thing taking any certification will serve any purpose in your job hunt, although it will enrich your Resume only, you will nothing get out of this from just taking a vertification
So, please tell us that you are a fresher or having real time working exposure in SAP SD module, then any one will guide you well. -
When connecting to server the other computers will not mount on the desktop
Hello
I have three computers connected wireless and ethernet. When connecting to the imac and mac pro with my macbook pro the other computers will not mount on the desktop. I have never had a problem like this before.
The imac and mac pro will mount the laptop or imac and the imac will mount the mac pro and laptop.
When I connect to the server with the laptop I can access everything thru the shared folders but nothing will mount on the laptop desktop using the, connect to server.
External HD connected with firewire will mount and the internal cd/dvd will mount.
I have ran permissions repair on the laptop. Have I accidently changed some configuration I am not aware of?
Any help or advice is greatly appreciated
Thank You
DickDick,
I know this sounds silly but while in Finder goto (Finder)/(Preferences) and then make sure your on the (General) tab, make sure all the things you want to show are checked.
If that doesn't help move the com.apple.finder.plist to the desktop you can find in in ~/Library/Preferences ( ~ = Your Home Folder), log out/log in, and see if that fixes the problem if not go ahead and move the plist file back.
hope that helps,
Weston -
I have two ipod nanos. And i have 2 itunes accounts and we are accessing both accounts from the same PC. One of my ipod works fine, it gets detected as a device and sync fine. The other one does not. Anyone knows what this may be?
The music sync is one way - computer to ipod. The only exception is ituens purchases. The ipod is not a backup device.
Copy everything from the old computer or your backup copy of your old computer, to the new one. -
Can't send mail out...and can't figure it out
Hi, after 4 hours or researching, I have finally eliminated the setting issues down to one, can't send mail with outside (not within the company) recipient address. I get Relay access denied. I have done a lot of reading and playing with different settings, just can't get it to work. So I decided to ask for some help here.
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
inet_interfaces = all
luser_relay =
mail_owner = postfix
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains = dun.dnsrbl.net
messagesizelimit = 10240000
mydestination = $myhostname,localhost.$mydomain,localhost,justme.com
mydomain_fallback = localhost
myhostname = mail.justme.com
mynetworks = 127.0.0.1/32,192.168.1.5
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdclientrestrictions = rejectmapsrbl
smtpdenforcetls = no
smtpdpw_server_securityoptions = login,cram-md5
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtlsloglevel = 0
smtpduse_pwserver = yes
smtpdusetls = no
unknownlocal_recipient_rejectcode = 450
I am running server 10.3.9 on a Xserve and Entourage as client. We have a valid MX record pointing at the right external address. And why is my result looks different than the others.....? This is nuts! Thanks in advance for any help or I will have to go back to the SunCobalt wich was working fine....
12 PB G4 1.33GHz/1.25GB, G4/1.3GHz x2/1.25GB, Mac OS X (10.4)Change:
mynetworks = 127.0.0.1/32,192.168.1.5
To:
mynetworks = 127.0.0.1/32,192.168.1.0/24
Or...
Authenticate your SMTP connections.
Jeff -
Two laptops - one will connect to the internet and the other one will not
I have two home laptops. Both show as connected to my network with full signal. However, when you attempt to open the internet, one laptop will not open and the other one will. I have tried connecting with just the cord from the router to the laptop and it doesn't work; I have tried looking up the IP address and one laptop address is different from the other - I don't know if this should be this way or not; I have tried doing the start, run, cmd, ipconfig, and I got 4 replies, but when I typed in ping space yahoo.com, I did not get the replies on the computer that will not go on the internet, but did get the replies on the other laptop. I don't know what else to do - please give me some ideas.
Make sure the IP address is set to DHCP, and browser is not configured for any proxy server.
-
can someone tell me how i can get my oiphone 4 to turn back on or has any idea what this problem is
Hi gillybabe82,
Welcome to Apple Support Communities.
Take a look at the article linked below, it provides a lot of great suggestions and will help you solve the iPhone power issue that you described.
iPhone: Hardware troubleshooting
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
I hope this helps.
-Jason
Maybe you are looking for
-
Deploy a JSP file onto the Portal Server ?
Hello All, I have a jsp file with me. Now I just want to deploy it on to the Portal server. Should I create a JSP Dynpage ? I've the complete jsp file . Shud i need to do anything to convert it into a jsp dynpage ? Can anyone tell me the procedure of
-
FCP will not read project, access denied
Please Help I was fussing around with VJ software that wasn't reading one of my quicktime movies made in FCP 5.0 (just raw footage). I had to change the codec to .mov so that the VJ software would read the file. But now, the whole project from which
-
When I've been doing a lot of web surfing - especially on a single site - Firefox slows down and barely more. Toolbar functions and cursor movement also slow. There's a long delay when typing information into online forms - I'm usually several words
-
SAP 1602 Wireless bridge issue. Non root bridge loses it's configuration
Hi guys, Today I tried to configure wireless link between two autonomous AP 1602 APs. There is a problem with Non-root bridge. I configured it with this command: AP2(config-if)#station-role non-root wireless-clients Non-root bridge successfully joins
-
my account comes up first unless i try to transfer purchases. Then her account comes up and says this account is synced with another account. She wont unsync or give me her password. I cant transter my purchases until she unsyncs the account. Is ther