After updating to patch 6.0.2 on my iPhone 5, I get this list of problem

Wifi speed is so slow
Sometimes I have to connect twice to successfully join a wifi network
Updating the apps on my iTunes in my computer is 5 times faster than updating it on the iPhone using the same Wifi connectivity
100% battery life was drained to 40% in just one hour because the location has poor signal but this isn't an excuse where my Samsung Galaxy 3 just drained by 10%

I've done the reset but the problem still persist. Even my 3G connection is faster than connecting to my home wifi with speed of 10mbps.

Similar Messages

After updating to windows 8.1 my wire less internet connection is getting disconnected intermittently

After updating to windows 8.1 my wire less internet connection is getting disconnected intermittently .I am unable to predict the frequency or time
period this is occurring.But now i am really struggling to use the internet.I have tried my laptop vendor support and Microsoft support both failed to provide a solution.Please help me to resolve.I have installed the Wifi driver from real tek site many times
,but that is not helping.kindly provide me the guidance.
when i searched in internet i am able to see many people are struggling with this same issue .

Hi,
You can refer to this blog, and try to roll back to the older version of network adapter driver to check the results. Other suggestions can also be used to troubleshoot your issue.
Windows 8.1 Wifi showing "limited" or "No Internet Access"
http://blogs.technet.com/b/dennis_schnell/archive/2013/08/31/windows-8-1-wifi-showing-quot-limitied-quot-or-quot-no-internet-access-quot.aspx
Meanwhile, please check with the manufacturer of your router to update the firmware.
If the issue persists, please help to collect following information for further research:
1) Enable RAS Tracing on the client.
- Over an Administrative command prompt.
- C:\> netsh ras set tracing * enabled
2) On the client enable the following log as well:
- Over an Administrative command prompt.
- C:\> netsh trace start scenario=netconnection capture=yes tracefile=c:\net.etl
3) Now, turn off Wireless adapter on the client and Turn it back ON for making it to authenticate. Once it fails to connect to the Wireless network, proceed to the next step.
4) Disable RAS Tracing on the client.
- Over an Administrative command prompt.
- C:\> netsh ras set tracing * disabled
5) On the client disable the following log as well:
- Over an Administrative command prompt.
- C:\> netsh trace stop
6) Please provide the following files:
From the Client:
a) ZIP folder of C:\Windows\Tracing
b) C:\Net.etl and C:\Net.cab
Upload these files in SkyDrive and post back the shared link.
Keep post.
Kate Li
TechNet Community Support

After updating to iOS 6.1.2, neither my iPhone or iPad will update apps thru App Store. Any suggestions?

After updating to iOS 6.1.2, neither my iPhone or iPad will update apps thru App Store. Any suggestions?

What happens when you try?
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Can't get email to go out after updating ios5. Settings look ok can receive incoming and can get to Internet Help

Can't get email to go out after updating ios5. Settings look ok can receive incoming and can get to Internet Help

Is this a POP account, or an IMAP account? Did you enable your account type in Gmail?
You can verify whether or not you did (and enable it if you didn't) by logging into Gmail on the web. Then, open the 'Forwarding and POP/IMAP' tab on your 'Settings' page, and configure IMAP. After enabling IMAP in Gmail, make sure you click 'Save Changes' so Gmail can communicate with your mail client.

After updating to iOS 6.0 everything is a mess. i cant get in my CO app game, imessages undelivered, worst of all i cant connect to Apps store. If u were able to solve this pls let me know. or if possible to return to old OS 5.1 that is much better. HELP!

after updating to iOS 6.0 everything is a mess. i cant get in my CO app game, imessages undelivered, worst of all i cant connect to Apps store. If u were able to solve this pls let me know. or if possible to return to old OS 5.1 that is much better. HELP!

I had the same experience with a new iPhone 5 that I bought last week. Did not have a chance to measure battery life before the 6.0.2 upgrade installed but I set up my phone exactly like my 4S and immediately started running out of power after short periods. Went to Xmas get together with fully charged 5 and 4S. Heading home the iPhone 5 shut down for low battery and the 4S had 65% power. Both phones had two half phone calls on then and no data usage.
That night I fully charged the iPhone 5 and, without lighting it up, put it on my night table. Next morning I picked it up and looked at battery indicator and I had 42% charge with NO activity!
Tried it again next night and wound up with 37% charge. (Slept longer).
Today I called the carrier and reactivated the 4S. Took the 5 to Apple Store and they kindly gave me choice of new replacement phone or refund. I took the refund. Uniquely, the Apple Store said it was Verizon CDMA phones that were coming back.
The are other strings on this with temporary solutions, but from my experience with 7 firmware changes on an HTC 4G phone the problem will continue because the solution will be hardware caused. We are in the days where RTM means Rush to Market - not Release To Manufacturing.
I fear the only solution is to either wait for the next model (I did not notice a really major change in performance over the 4S in LTE heavy Seattle area) - or switch to another manufacturer.
It might be useful for these forums to indicate if you have a GSM or CDMA phone to see which have more problems.
Discouraged....

After updating to Mavericks I can't open iTunes. I keep getting a popup telling me to unclick "run in 32- bit mode" in iTunes info. I have done that several times and rebooted. Everything else seems to be working fine.

After updating to Mavericks, I can't open iTunes. I keep getting a pop up telling me iTunes needs to run in 64-bit mode. After following directions several times to go to Finder, iTunes, Get info and "unclick 32-bit mode" it still won't work and i keep getting the smae pop up window. I've rebooted several times also.

What version of iTunes do you have? The current version of iTunes for Mavericks is 11.1.5 and the default mode is 64 bit. If "Open in 32 bit mode" is checked and you cannot uncheck it are you logged on using an account with administrative priveleges?

There is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)

there is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)

Thanks for reply, but problem is diffrent I got updated my device via I tune(IPSW 5.01) before that, it was working well after upgreade 4.1 to 5.01 I am getting problem. No cydia no signal!
BTW Thank you,

Problem from ID phone after updating on iOS7 I can't activate your iPhone!

Good afternoon! Problem after updating on iOS7 I can't activate your iPhone old ID I demands it I don't remember! serial number F17JGDCXTTR. IMEI 013336008605472. Model A1428. I live in Belarus in the city of Minsk and we have no service centers Apple! That to do me my new ID [email protected]
Help please! My e-mail [email protected]

ITunes says:
At the moment the iPhone is tied to the Apple ID (i ***** @ y *****. Ru). Sign in with Apple ID, which is used to configure this iPhone.
Unlock iPhone on this I ***** @ ya *****. Ru impossible.

After updating iOS 7.0.2 on my 4s iPhone my volume on my magic jack has gone .i can hear people speaking to me. But they are not hearing me

After After updating iOS 7.0.2 on my 4s iPhone my volume on my magic jack has gone .i can hear people speaking to me. But they are not hearing me

I am in the same predicament...any resolve? Other than possibly taking it into the shop?

After upgrading to Maverick, when I double click on the attchment I get this message "...could not be saved, because you cannot change the contents of that fold

After upgrading to Maverick, when I double click on the attachment I get this message "...could not be saved, because you cannot change the contents of that folder. Change the folder properties and try again, or try saving in a different location." It happens for all types of files.
Any suggestions as how to fix this?
I'm on a Mac OS X 10.9.3 with Thunderbird 24.5.0

Thunderbird > preferences (I think on a mac) and under attachments set the folder

I am trying to update my iPhone software but to do so I needed to update iTunes. When I try to do that, I keep getting this error message" "There is a problem with this Windows Installer Package. A program required for this install to complete could not

I am trying to update my iPhone software but to do so I needed to update iTunes. When I try to do that, I keep getting this error message" "There is a problem with this Windows Installer Package. A program required for this install to complete could not....

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

TS3694 1015 ? I'm trying to update my iPhone 3 and get this error message. The phone belonged to my wife, and I'm trying to restore it to factory settings as new owner. Any ideas?

1015 ? I'm trying to update my iPhone 3 and get this error message. The phone belonged to my wife, and I'm trying to restore it to factory settings as new owner. Any ideas?

Before beginning the download, try temporarily disabling your antivirus, anti-adware, anti-spyware, and any other anti-whatever that is required with the secure OS your computer is running.

After upgrading my iPad to ios7, I lost the airplay icon. Is this a common problem.

After upgrading my iPad to ios7, I lost the airplay icon. Is this a common problem?

The icon was moved to Control Center, swipe the screen up from the bottom.

Have downloaded 10.9.4 but alert messages:This update requires OS X version 10.9. Where do I get this version from?

Have downloaded 10.9.4 but alert messages:This update requires OS X version 10.9. Where do I get this version from?

Ok.. your first post states you downloaded v10.9.4
Are you trying to upgrade to Mavericks v10.9 ??
If so, make sure your Mac meets v10.9 requirements > OS X Mavericks: System Requirements
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later),
MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
Your Mac also needs:
OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
2 GB or more of memory
8 GB or more of available space

I was updating Firefox from version 6 to version 7, after updating I tried to open Firefox and the message I got is this: This application has failed to start because xul.dll was not found. How can I fix this?

I was updating Firefox to the newest version 7.0.1 from version 6.0.2 I think it was, I clicked the restart Firefox button that always comes up after updating. It started updating and then Firefox never restarted like it was supposed to after it was done updating. I then tried to open Firefox and it told me "This application has failed to start because xul.dll was not found." I did have Firefox crash on maybe about 30 minutes or so earlier which bothered me because I have been using Firefox for years and never had it crash on me before but I didn't think much of it at the time it happened because I was able to go back onto Firefox and finish what I had been working on. A while later I checked for updates and updated. The first time I tried to update it didn't work though so I had to shutdown Firefox and reopen Firefox and start the update a second time. It was after the second time that when I tried to open Firefox I got that message about failing to start because xul.dll can't be found. I filed a crash report when my Firefox crashed. This would have been around 1am-2am in the morning that Firefox first crashed and then wouldn't allow me to open it after updating. I have a DELL laptop running the Windows XP operating system but the laptop is probably at least 6 or 7 years old. The laptop will no longer charge so I always have to have it plugged into an outlet. Both my laptop hard drive and my external hard drive give me messages that I am running out of disk space on my hard drive. I bought this laptop 6 or 7 years ago second hand so it could be even older. In short it's a piece of crap and it gives me all kinds of issues but I currently can't afford a new one, but I have never had any problems with Firefox and I use Firefox more than any other aspect of my laptop so it's really really bothering me. May you please help me fix it?

Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

After updating to patch 6.0.2 on my iPhone 5, I get this list of problem

Similar Messages

Maybe you are looking for