After updating to system 7.2 the library folder in my home folder has disappeared.. anyone know if this is a byproduct of OS7.2

After updating to system 7.2 on my MacAir, the library folder in my home folder has disappeared.. anyone know if this is a byproduct of OS7.2

Not with 10.7.2 but with OSX Lion since it was released.
Apple has hidden the Library folder by default.
In Finder option-click Go in the menubar and it will appear under Home.
Or permanently with this Terminal command: chflags nohidden ~/Library
Stefan

Similar Messages

  • Mac Book Air sleeps when moved...i don't know whats the problem...please help me out if anyone knows about this...

    Mac Book Air sleeps when moved...i don't know whats the problem...please help me out if anyone knows about this...

    your reed switch for the monitor is defective, it thinks youve shut the lid when you havent
    mechanical fault , contact Apple for service and parts replacement.

  • My iPad 2 randomly had a line going down the screen when I switched it on today, does anyone know why this is or how to get rid of it ?

    My iPad 2 randomly had a line going down the screen when I switched it on today, does anyone know why this is or how to get rid of it ?

    Hello there, Adavidson137.
    The following Knowledge Base article offers some great clarification on display anomalies:
    About LCD display pixel anomalies for Apple products released in 2010 and later
    http://support.apple.com/kb/ht4044
    The following steps for troubleshooting iPhone display issues can also be useful for your iPad as well:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Display image issues
    This can include bright or dark pixels, lines in video, or sections of video missing.
    Try turning iPhone off and then on again.
    Verify the issue is not content related, by viewing different content.
    If the image is too dark, adjust the brightness. In General Settings choose Brightness and Wallpaperand slide the slider.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • After updating to 4.4.2  the notification light does not change colors.  How do I fix this?

    After updating to 4.4.2 the notification light does not change colors.  It only blinks one color.  How do I fix it?

        Hello Saralynn43. Getting new updates is always fun, but then there are certain changes that can take some getting used to! This may be one of these cases where there may have been a change done to the notification system. What are the notifications that have been affected with the color change? Let us know as we'd like to look into this for you. Thank you.
    NicandroN_VZW
    Follow us on twitter @VZWSupport

  • After updating libraries system still needs the old one.

    Hi. Almost always when I upgrade library and som other packages, system still needs the old one but at the same time it needs the new one. Like when i updated gnome and libffi, it needs libffi.so.5 and libffi.so.6. When I run gnome-shell with libffi.so.5 I've got:
    /usr/bin/gnome-shell: error while loading shared libraries: libffi.so.6: cannot open shared object file: No such file or directory
    When I upgrade it, new error appears:
    /usr/bin/gnome-shell: error while loading shared libraries: libffi.so.6: cannot open shared object file: No such file or directory
    It happend with more apps. I think something is wrong with my system and i don't know what.

    I am using vim in the console but have gvim because it is compiled with X copy/paste support.
    /usr/local/lib is empty.
    I just updated fully (included a gvim and vim-runtime update).
    I deleted the files I added earlier (libffi.so.5, libffi.so.5.0.10).
    I've also rebooted.
    As you can see below, vim needs both libffi.so.5 and libffi.so.6.
    [ismo@it ~]$ ls -l /usr/local/lib
    total 0
    [ismo@it ~]$ vim
    vim: error while loading shared libraries: libffi.so.5: cannot open shared object file: No such file or directory
    [ismo@it ~]$ ldd /usr/bin/vim
    linux-vdso.so.1 => (0x00007ffff292d000)
    libgtk-x11-2.0.so.0 => /usr/lib/libgtk-x11-2.0.so.0 (0x00007f755e1b7000)
    libgdk-x11-2.0.so.0 => /usr/lib/libgdk-x11-2.0.so.0 (0x00007f755df04000)
    libgdk_pixbuf-2.0.so.0 => /usr/lib/libgdk_pixbuf-2.0.so.0 (0x00007f755dce2000)
    libpango-1.0.so.0 => /usr/lib/libpango-1.0.so.0 (0x00007f755da97000)
    libgobject-2.0.so.0 => /usr/lib/libgobject-2.0.so.0 (0x00007f755d849000)
    libglib-2.0.so.0 => /usr/lib/libglib-2.0.so.0 (0x00007f755d555000)
    libSM.so.6 => /usr/lib/libSM.so.6 (0x00007f755d34d000)
    libICE.so.6 => /usr/lib/libICE.so.6 (0x00007f755d131000)
    libXt.so.6 => /usr/lib/libXt.so.6 (0x00007f755cecb000)
    libX11.so.6 => /usr/lib/libX11.so.6 (0x00007f755cb91000)
    libm.so.6 => /lib/libm.so.6 (0x00007f755c89c000)
    libncursesw.so.5 => /usr/lib/libncursesw.so.5 (0x00007f755c63f000)
    libacl.so.1 => /lib/libacl.so.1 (0x00007f755c437000)
    libgpm.so.2 => /usr/lib/libgpm.so.2 (0x00007f755c231000)
    libdl.so.2 => /lib/libdl.so.2 (0x00007f755c02d000)
    liblua.so.5.1 => /usr/lib/liblua.so.5.1 (0x00007f755be01000)
    libperl.so => /usr/lib/perl5/core_perl/CORE/libperl.so (0x00007f755ba87000)
    libpthread.so.0 => /lib/libpthread.so.0 (0x00007f755b86b000)
    libc.so.6 => /lib/libc.so.6 (0x00007f755b4ca000)
    libpython2.7.so.1.0 => /usr/lib/libpython2.7.so.1.0 (0x00007f755b111000)
    libruby.so.1.9 => /usr/lib/libruby.so.1.9 (0x00007f755acfe000)
    libpangocairo-1.0.so.0 => /usr/lib/libpangocairo-1.0.so.0 (0x00007f755aaf1000)
    libXfixes.so.3 => /usr/lib/libXfixes.so.3 (0x00007f755a8ea000)
    libatk-1.0.so.0 => /usr/lib/libatk-1.0.so.0 (0x00007f755a6c7000)
    libcairo.so.2 => /usr/lib/libcairo.so.2 (0x00007f755a3c3000)
    libgio-2.0.so.0 => /usr/lib/libgio-2.0.so.0 (0x00007f755a077000)
    libpangoft2-1.0.so.0 => /usr/lib/libpangoft2-1.0.so.0 (0x00007f7559e4a000)
    libfontconfig.so.1 => /usr/lib/libfontconfig.so.1 (0x00007f7559c14000)
    libgmodule-2.0.so.0 => /usr/lib/libgmodule-2.0.so.0 (0x00007f7559a10000)
    libXext.so.6 => /usr/lib/libXext.so.6 (0x00007f75597fd000)
    libXrender.so.1 => /usr/lib/libXrender.so.1 (0x00007f75595f2000)
    libXinerama.so.1 => /usr/lib/libXinerama.so.1 (0x00007f75593ef000)
    libXi.so.6 => /usr/lib/libXi.so.6 (0x00007f75591e1000)
    libXrandr.so.2 => /usr/lib/libXrandr.so.2 (0x00007f7558fd8000)
    libXcursor.so.1 => /usr/lib/libXcursor.so.1 (0x00007f7558dce000)
    libXcomposite.so.1 => /usr/lib/libXcomposite.so.1 (0x00007f7558bcb000)
    libXdamage.so.1 => /usr/lib/libXdamage.so.1 (0x00007f75589c8000)
    librt.so.1 => /lib/librt.so.1 (0x00007f75587c0000)
    libpng15.so.15 => /usr/lib/libpng15.so.15 (0x00007f7558593000)
    libgthread-2.0.so.0 => /usr/lib/libgthread-2.0.so.0 (0x00007f7558391000)
    libpcre.so.1 => /usr/lib/libpcre.so.1 (0x00007f7558137000)
    libffi.so.6 => /usr/lib/libffi.so.6 (0x00007f7557f2f000)
    libuuid.so.1 => /usr/lib/libuuid.so.1 (0x00007f7557d2a000)
    libxcb.so.1 => /usr/lib/libxcb.so.1 (0x00007f7557b0c000)
    libattr.so.1 => /lib/libattr.so.1 (0x00007f7557908000)
    /lib/ld-linux-x86-64.so.2 (0x00007f755e7e6000)
    libcrypt.so.1 => /lib/libcrypt.so.1 (0x00007f75576d1000)
    libutil.so.1 => /lib/libutil.so.1 (0x00007f75574ce000)
    libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0x00007f755721e000)
    libpixman-1.so.0 => /usr/lib/libpixman-1.so.0 (0x00007f7556f96000)
    libEGL.so.1 => /usr/lib/libEGL.so.1 (0x00007f7556d75000)
    libGLESv2.so.2 => /usr/lib/libGLESv2.so.2 (0x00007f7556b70000)
    libxcb-shm.so.0 => /usr/lib/libxcb-shm.so.0 (0x00007f755696e000)
    libxcb-render.so.0 => /usr/lib/libxcb-render.so.0 (0x00007f7556765000)
    libz.so.1 => /usr/lib/libz.so.1 (0x00007f755654f000)
    libresolv.so.2 => /lib/libresolv.so.2 (0x00007f7556338000)
    libbz2.so.1.0 => /lib/libbz2.so.1.0 (0x00007f7556128000)
    libexpat.so.1 => /usr/lib/libexpat.so.1 (0x00007f7555efe000)
    libXau.so.6 => /usr/lib/libXau.so.6 (0x00007f7555cfa000)
    libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0x00007f7555af4000)
    libX11-xcb.so.1 => /usr/lib/libX11-xcb.so.1 (0x00007f75558f2000)
    libxcb-dri2.so.0 => /usr/lib/libxcb-dri2.so.0 (0x00007f75556ee000)
    libxcb-xfixes.so.0 => /usr/lib/libxcb-xfixes.so.0 (0x00007f75554e8000)
    libxcb-shape.so.0 => /usr/lib/libxcb-shape.so.0 (0x00007f75552e5000)
    libwayland-client.so.0 => /usr/lib/libwayland-client.so.0 (0x00007f75550db000)
    libwayland-server.so.0 => /usr/lib/libwayland-server.so.0 (0x00007f7554ecd000)
    libffi.so.5 => not found
    libgbm.so.1 => /usr/lib/libgbm.so.1 (0x00007f7554cc7000)
    libglapi.so.0 => /usr/lib/libglapi.so.0 (0x00007f7554a82000)
    libudev.so.0 => /usr/lib/libudev.so.0 (0x00007f7554874000)
    libdrm.so.2 => /usr/lib/libdrm.so.2 (0x00007f7554669000)
    libffi.so.5 => not found
    libffi.so.5 => not found

  • My intel-Mac doesnt seem to release memory after I quit applications and I have to continually restart to regain memory. Does anyone know why this is happening?

    I have a Intel-iMac running snow leopard and programs that I run and then quit wont release the memory the were using I have 3GB of Ram so I should have plenty available. Has anyone else had this problem? Im tired of restarting to get my memory back.

    Russ Grebenc wrote:
    I realize that 3 GB is not much today but 95% of what I use is Safari, Firefox, and Mail and I never used to have this problem. Im using Snow Leopard 10.6.8. Its a 2.4 Ghz Intel Core 2 Duo iMac.
    Browsers tend to use a lot of RAM, particularly if you have multiple tabs open. If you want to see where your RAM is being used open Activity Monitor (Applications - Utilities - Activity Monitor) and you can see. If your machine has the ability to upgrade the RAM that is what I'd strongly recommend you do.

  • After updated op system, my itunes music library is "no content"

    I updated my itouch to newest op system today. Now when i select the music icon it says "no content". I tried syncing in the summary page of itunes, when i do that i see the msg at top says syncing ipod, step 1 2 3 and then it blinks off, all in 1-2 seconds. How to i get my music back?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • After updating my iPhone 5 to the ios 7, my imessage feature and facetime will not work.

    After updating my iPhone 5 to the ios 7, imessage nor facetime will work. Anyone else with this problem?

    First try Resetting it: Hold down the home and sleep button, ignore the red OFF slider, wait for the Apple logo then let go.
    If that does not work, Restore your iPhone in iTunes from your backup.
    If that still does not fix it, Restore your iPhone and a new phone (not from backup) and see how it works. If it is doing fine you have a app you are using that is probably causing your problem. Load them one and a time until the problems recur and you will have found the one that is a problem.

  • HT2506 After updating my system to Mountain Lion 10.8.2 I can no longer view videos on Facebook or other sites. The only one I can view videos on is youtube. I have downloaded Adobe Flash player and still no luck. I cannot even open Preview on my computer

    After updating my system to Mountain Lion 10.8.2 I can no longer view videos on Facebook or other sites. The only one I can view videos on is youtube. I have downloaded Adobe Flash player and still no luck. I cannot even open Preview on my computer anymore. Any ideas would be helpful thanks

    Merely clicking the Preview icon in the Dock doesn't cause it to open anything, unless you had one or more windows open the last time it quit.
    If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test.
    1. If you're getting a "blocked plug-in" error, triple-click the line below to select it:
    /Library/Internet Plug-Ins Right-click or control-click the highlighted text and select
    Services ▹ Open
    from the contextual menu. A folder should open. If there is more than one item in the folder with the words "Flash Player" (not "flashplayer") in the name, open the respective Info windows, check the version numbers, and delete all except the latest. You may be prompted for your login password. If you get the same error after doing that, re-download and reinstall Flash. Download it from this page:
    Adobe - Install Adobe Flash Player
    Never download a Flash update from anywhere else.
    2. If you get a "missing plug-in" error, select
    Safari ▹ Preferences... ▹ Security
    from the Safari menu bar and check the box marked Enable plug-ins.
    3. Select
    Safari ▹ Preferences... ▹ Extensions
    from the Safari menu bar. If any extensions are installed, disable them.
    4. In the Safari preference window, select
    Privacy ▹ Remove All Website Data
    Close the window. Then select
     ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Delete All. Close the preference pane.

  • HT201210 After updating my iphone. Only the logo and connect to itunes on the screen.

    After updating and system restore my iphone wont open. only the logo and connect to itunes on the screen.

    Hello nicolajan,
    Thank you for contacting Apple Support Communities.
    I see you linked here from TS1275, that is where I would recommend you starting to troubleshoot this issue. Did you follow the steps in that article? If not, here is that link again and I would recommend following all of the steps outlined there.
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/TS1275
    If that doesn't resolve the issue, then you can move on to this article for more advanced troubleshooting.
    Resolve iOS update and restore errors
    http://support.apple.com/kb/TS3694
    Regards,
    Jeff D.

  • HT4623 I cannot import my photos to my Windows xp PC after updating my iphone 5 with the latest iOS 7.1

    I cannot import my photos to my Windows xp PC after updating my iphone 5 with the latest iOS 7.1

    According to the iTunes download page, it still supports Windows XP.
    Windows System Requirements
    PC with a 1GHz Intel or AMD processor and 512MB of RAM
    Windows XP Service Pack 3 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
    64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store
    (Emphasis added)
    If your XP computer was updated, then it should work. Again, the links I posted earlier contain the current USB drivers for the iPhone and Windows.

  • After update iOS 8 some of the apps don't work please help me

    After update iOS 8 some of the apps don't work please help me As fast as you can

    There can be some of that. Unfortunately, it's up to the app developers to make their app work with the iOS.
    So checking for updates can help. You can also look at the reviews for the app, see if others have the same issue. If 8 has broken the app, all you can do is wait.
    In some cases, a reset can help. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again. (this can work if the app is fine with iOS8 but is just glitching...it's a harmless reboot of the system)
    Another thing to try is to force quit the app(s) and force them to reboot. Double tap the home button. Flick the preview for the app up and off the screen to close it. Then single tap the home button to exit the mode. Try your app again. If it's just a glitch then this sometimes clears it up.
    I know once I updated my devices I then had several updates pushed out - updates that required iOS8 so weren't available before the update.

  • After updating to Windows 8.1 the Webcam in my Inspiron is gone and Imaging devices missing in Device Manager

    my webcam in my Dell Inspiron 3521 was working fine with Windows 8.  After updating to Windows 8.1 the Webcam in my computer is gone and the 'Imaging devices' is  missing in the Device Manager.  how can I get the Webcam back? 
    thank you very much.

    I don't see anything specific to your webcam issue but there are a number of Windows 8.1 related drivers listed on the Support site.
    http://www.dell.com/support/home/us/en/04/product-support/product/inspiron-15-3521/drivers
    The Dell Update utility will recommend drivers that are needed specific to your model.
    http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=860YD&fileId=3374847033&osCode=WB64A&productCode=inspiron-15-3521&languageCode=EN&categoryId=AP
    Good luck!
    bill
    Regards, Bill Moore @BMooreAtDell

  • After updating my i phone to the latest ios 7.0 software the apps I purchased are still accessible through the app store but not on the home screen how do i get them back

    After updating my iphone 4s to the latest ios version 7 the apps that i purchased are no longer on the home screen and can only be found on the app store.. how can i get them back on the home screen? please help

    You can move apps around in iOS 7 the same as iOS 6. Press an app icon until you see it wiggle; then drag it to where ever you want it to be. Drag it onto another app to create a folder with the two apps. Tap the Home button to stop the wiggle.

  • Immediately after updating Acrobat Pro XI to the latest version, the software no longer displays imags in pdf docs.

    Immediately after updating Acrobat Pro XI to the latest version, the software no longer displays images in pdf docs.  All the boxes where images are supposed to be are solid grey.  Old documents that worked are no longer displayed correctly and new documents I make do not display images.  All grey boxes.  Worked fine before the update.  Suggestions?

    Hi precious_star,
    Could you please let me know what version of OS are you using.
    Open Acrobat and go to "Edit > Preferences > Page Display" and check whether 'Show large images' option is checked.
    Is this issue specific for one PDF?
    If possible, please share the file with me via email so that I can also check at my end.
    I have sent you a message with my contact id details.
    Hope to get your response.
    Regards,
    Anubha

Maybe you are looking for

  • When I click on a link, a new window opens but is blank and says "stopped" at the bottom

    Happens on any website.eg-if I am looking for a quote on moneysupermarket.com and I lick on the required link, a new window will open but it will be blank and in the bottom left hand corner the word stopped appears

  • Load Balancing and Failover with 10G Standard Edition

    Hi, I am new to Oracle Replication and need some help setting up replication for load balancing and failover. Is this possible using Oracle 10G Standard Edition? I plan on having all updates done on the master site and both databases will be for read

  • How To combine two Itunes libraries, and run Itunes off of external device

    Hi, I have a very blonde question to ask. I have the ipad2 (now very old) and a Macbook Air - Currently I have one itunes library on my Macbook Air, and one on my itunes - not sure how I did that, but here we are. I would like to combine both the lib

  • Screen resolution on Boot Camp

    Hi I bought a macbook whitch Screen resolution is 2650 x 1600, and installed Windows 8 by bootcamp so I expected to see very small screen of my apps. For my surprise  most screens are too large. But Java script application screen its so high resoluti

  • Can' t activate E50 bluetooth!!!

    I have a problem activating my e50 buetooth, sometimes after trying many times it turns on but cant connect to others bluetooth devices and vice-versa. I tried to update the sw but its still the problem. Need your help PLZ!!!!