After updating to Version 9.0.6 , Imovie won't work at all.

How can I make my Imovie work again after upgrading to 9.0.6?

Had the same problem with the new update. I finally got back to my previous version by using system restore. After the restore I had to go to the "All Programs" list and click on Quicktime and iTunes individually to allow them to re-configure, then had to restart the computer again. After that all's well. My lbrary was intact.
I tried everything to get the newest version to work, including completely uninstalling my current versions of QT and iTunes, then downloading the latest directly from the Apple website, but, after 3 attempts, nothing worked. Guess I'll have to wait for the next update and try again.
By the way, your library is not actually stored in iTunes--it is stored in your Music folder, so you should not lose anything by uninstalling iTunes if you need to.

Similar Messages

  • I have a MackBook Pro I updated to Maverick and now my internet won't work and all my programs freeze and I have to restart my computer.

    I have a MackBook Pro I updated to Maverick and now my internet won't open and all my programs freeze and I have to restart my computer. The only program that doesn't freeze is Microsoft Word.

    Back up your documents and everything else important to you, not that there is any reason to believe your hard disk may be failing, but the symptoms you describe may presage an impending disk failure, and you should have backups anyway.
    To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting:
    Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red.
    When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
    Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
    http://www.etresoft.com/etrecheck
    Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
    Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
    It will take a moment to run as it collects its data.
    Copy and paste its output in a reply.
    Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
    EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
    When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
    After completing the above please determine if the problems also occur in "Safe Mode":
    Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
    You must disable FileVault before you can start your Mac in Safe Mode.
    Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
    Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
    To end Safe Mode restart your Mac normally. Shutdown will take longer as well.

  • After updating to version 6 my iphone 4 will not work all is see is a flashing white apple!  I cant get to the application screen.

    I updated my i-phone 4 software to version 6.  Unfortunately my phone now wont work, it doesnt get passed the initial white apple which now flashes.  I have tried holding down the power and home button for 10 seconds, it makes no difference.  when it powers back up it still doesnt get passed the white apple.  I have tried plugging it into itunes but it isnt recognised either, what can I do????

    It may be related.  Here are the troubleshooting articles depending on which type of computer you have:
    iOS: Device not recognized in iTunes for Windows
    iOS: Device not recognized in iTunes for Mac OS X

  • After update to iOS 7.1, iPhone 4 won't work. Stuck in recovery mode. Won't restore.

    Hello,
    So I'm pretty baffled at this point. Last night I started downloading the iOS 7.1 update as my iPhone 4 was plugged into iTunes. The update did not complete on my phone. Instead, the dreaded "Connect to iTunes" logo appeared. After researching last night and again this morning, I have not found a solution.
    When I plug my phone into iTunes, this message appears: "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes." Then, I have the option to restore iPhone.
    So, having come to terms that I will lose all data - luckily my photos and videos have all been uploaded to my computer - I began restoring it. As it's downloading, this message then appears:
    I've read through the "More Information" page several times. Checked my host file, added the "# " in front of the gs.apple.com IP address, restarted the computer, and still no luck. I haven't tried updating or restoring on another computer yet, but I have a feeling that won't change anything - I've read other people's accounts and that step just didn't work.
    I updated my iTunes to the lastest version and restarted. Nothing.
    I downloaded tinyumbrella and RecBoot to try and exit the apparent recovery mode. This didn't work. I have tried numerous times restarting the phone (holding down the home button and power button) with different variations of unplugging the USB from my laptop, letting go of the home button when the Apple logo appears, holding down the + volume button along with the power button, etc.
    Does anyone know what I should do? Would calling Apple help? Or would going in person to an Apple store be better? Would they replace my phone? I don't see how this can be resolved unless the Geniuses have a universal restart method that bypasses everything. I need my phone for work and would be okay with just restoring the phone. Note: My phone has not been jailbroken.
    Really hope someone can help. I would greatly appreciate it...
    Thank you!

    The fact that gs.apple.com was in your host file to begin with is an indicator that your computer was used to jailbreak or hack an iOS device at some point in the past. You can not get help here for a hacked or jailbroken device. If your phone was hacked or jailbroken, Apple won't touch it.
    RecBoot and Tinyumbrella are hacking tools.
    Google "iPhone DFU mode".
    Try restoring in DFU mode. If that doesn't fix it, make an appointment at the genius bar and see what Apple has to say about it.

  • After updating to 8.1.2 my iPod won't sync and all artwork is missing

    Has anyone else experienced this - updated to 8.1.2 this weekend, now iPod (5th gen) won't sync with iTunes on PC (skips straight to Step 4 without doing anything).  All my music artwork is now missing too?

    Correct sync settings are verified. Not sure why I should need to back up and restore - it synced fine before the "upgrade" to 8.1.2. Obviously I can reset/restore when I have time to do so, and hopefully that might work, but why have Apple released an upgrade that made my device unfunctional?

  • HT1222 my iphone 4S no longer plays music output to speaker after updating to version 6.1.3.  I am unable to reset the phone to an earlier version!  How do I get my audio output to speaker back? (music, audible, youtube, netflix))

    my iphone 4S no longer plays music output to speaker after updating to version 6.1.3.  I am unable to reset the phone to an earlier version!  How do I get my audio output to speaker back? (music, audible, youtube, netflix)

    So you have business contacts that were lost... do you not have these on a Database in some shape or form? Sounds like you need to invest in a RAID1 backup setup for your computer so you dont have this issue in the future.
    As for repairing your problem, sounds like you are going to need to start from scratch at this point or if the data is still on your phone look into a program that can take the information from the phone onto iTunes.

  • Hello. After updating to version 7.0.2 was not on the phone face time application why?

    Hello. After updating to version 7.0.2 was not on the phone face time application why?

    If your phone was originally sold in KSA or UAE, facetime is permanently removed from it. If you are in one of those countries, and your friends have facetime on their phones, then they were originally sold in a different country.

  • I have a problem my blackberry z10 after update os version 10.3.1.1779

    I have a problem After update os version 10.2 to 10.3.1.1779  in my BlackBerry z10 .I lost my whole data after phone switch off  and all setting are reset. Please anyone help me to resolve this issue. 

    Hi and Welcome to the Community!
    Here is a KB that discusses that error:Article ID: KB36747 All data is deleted following a manual restart of the BlackBerry 10 smartphone and a blue LED is displayed during boot upHopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you. If it does not apply, then the next recommended action is for you to do an OS reload via LINK.
    Good luck and let us know!

  • FF doesn't start after update to version 27.0.1

    FF doesn't start after update to version 27.0.1
    Crash ID: bp-2bc18734-d643-4843-a10f-fd6102140214

    Firefox 27.0.1 is too new for me to know what unique issues it might have. I will message you a link to download the installer for Firefox 27.0 to see whether that reverses the problem.

  • Screen resolution changed only in the browser after update of version 9.0.1 how do I change it back

    Screen resolution changed only in the browser after update of version 9.0.1 how do I change it back?

    http://kb.mozillazine.org/Screen_resolution_changes_when_launching_application ?

  • Nano quit working after update to version 1.2

    Brand new nano quit working after update to version 1.2 It worked fine before. My computer see usb storage device but doesn't recognise ipod. ipod updater that worked to let me update doesnt regonise nano either. I returned to store where I bought it, got a new one, brought it home, ran updater again now it the new one is doing the same thing. What gives? I have never had a problem in the past with updater. Is there any way to take it back to version 1.1 since 1.2 doesn't work?

    This fix came from Caspar (Thank you SOOO much!). It took me 10 minutes to do this and now my beloved ipod nano is back! Hopefully this will help some of you:
    Original Problem: Updated iTunes(6.0.5) and iPod nano (1.2). After the update, iTunes would not recognize my iPod and therefore would not let me remove the iPod from my computer, which seems to be the problem most people are having.
    The Fix:
    *uninstall iTunes, iPod, and any updates (make sure anything related to these two programs are not on your computer)
    *Open Control Panel
    *Click the "switch to classic view" link, if
    necessary
    *Double click "administrative tools"
    *Double click "computer management"
    *Under "storage" click on "disk management"
    *Find your iPod's listing
    *Right-click on it and click "format"
    *Select "FAT32" and start the format
    *After reformatting, remove iPod from computer
    *Download iTunes directly from the Apple website (I didn't restart my computer at the prompt)
    *Download 6/28/06 update for iPod (do NOT plug iPod in before doing this!)
    *Open update for iPod and wait until prompt to plug iPod in (do not plug in early)
    *Wait for the update....and there ya have it!!
    Hopefully this will help some people, as I have spent the past 2 weeks doing the 5R's thing. After completing the steps above, I haven't had a problem with my iPod..and now my Nike+ works!! Thanks again, Caspar...you're a genius!!
    p.s. if this helps, please repost this message to others who have the same problem as we do...

  • Nothing works after updating to version 15

    After updating to version 15 nothing will load. I can't open any webpage or even connect to my router via Firefox.

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "Continue in Safe Mode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • Infragistics UltraWebListbar was working fine with the earlier version of the firfox. But it crashes after updating to version 12.

    I am using infragistics UltraWebListbar to display list of menu in one of my page.
    It was working fine with the earlier version of the firfox. But it crashes after updating to version 12.
    Following are the few details from the stack trace
    System.Convert.ToInt32(String value) +63
    Infragistics.WebUI.UltraWebListbar.UltraWebListbar.getRenderer() +237

    It's a third-party application, ask Infragistics support board. Maybe they have a fix or a dev version to fix your issue.

  • After update to version 4.01 from 3.6.17 all my bookmarks and passwords are gone,how can i get it

    after update to version 4.01 from 3.6.17 all my bookmarks and passwords are gone,how can i get it
    my bookmarkbox is emty , how can i bring back the bookmarks

    First it would be helpful to get more info. Do you keep your music in the default location inside the iTunes folder? Do you use iTunes to keep it organized? Do you have any type of backup of either the iTunes Library files or your entire Music folder? Before reinstalling anything, check that your actual music files are still there. Go to your_homefolder/Music/iTunes/iTunes Media/Music and I am pretty sure that all your files are still there. iTunes keeps its library file on the root level of the iTunes folder. It is either corrupted or you somehow created a new one which subsequently is empty. Hold down the option while you click on iTunes, then choose "existing library" and browse to your iTunes folder and select the iTunes Library file and see what happens. Report back if your iTunes Library file is corrupt.

  • S this necessary to keep enabling the 3G in iphone 4s after updating the version?

    s this necessary to keep enabling the 3G in iphone 4s after updating the version?

    If "Enable 3G" is on, you shouldn't need to enable it again after updating.

Maybe you are looking for

  • Unexpected Database Connector Error - Help please !!

    Hi, I am trying to use stored procedure in the crystal report, that comes bundled with RAD7. The following code I got from http://diamond.businessobjects.com/node/520 for using the stored procedure. I am getting 'UnexpectedQueryEngineError' on JRCCom

  • Why my credit card cannot be used in iTunes?

    Why my credit card cannot be used in iTunes?

  • Purchase requisition change

    Hi Experts, I need a report for a purchase requisition, if a PO already exists against it, I need to change the flag for the purchase requisiton as closed. Is there any sample report to do this?I have checked BAPI BAPI_REQUISITION_CHANGE. Do I need t

  • Sapscript - print negative amounts

    Hi, we have a sapscript solution for printing the content of amount items; they are defined with NETWR or KWERT data element (CURR 13/15,2). When we print negative values the format is "x,y-", with the less sign after, but now it is asked to have the

  • HOW TO ADD DRILL DOWN IN A REPORT

    hi well i want to add drill down in my report.... im unable to find it .... can you please help me to make a drill down in my report. thnx and regards UMAR NAYAB.