After upgrade attempt for 8310, device will not restart -- only blinking red light

Problem: I tried to upgrade the device software to 4.5, and now THE DEVICE WILL NOT RESTART AT ALL. Not with a hard reset. Not using the SIM and battery from my 8310 and putting it in hers. Nothing. Just a red light that blinks in a pattern: two quick blinks, then a pause; two quick blinks, then a pause, etc.
Background: This 8310 had vers. 4.2.2 device software, and something like 2.6 on the desktop. I downloaded/upgraded to 4.6 for the desktop and 4.5 for the device from the AT&T site. The Desktop manager prompted me to install the new device software... looking good. After several minutes, I got an "unknown error" message and it stopped the install.Following a support article, I uninstalled reinstalled both updates, but then the problem occurred: no NOTHING happens on the device screen at all, just the blinking red light when the device is plugged in.
The AT&T store tells me this is about the tenth "dead" Curve he's seen in about a week, apparently all occurring when folks have attempted a software updgrade. Any thoughts/help to offer?
Please help!
Solved!
Go to Solution.

Check this instruction:
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry

Similar Messages

  • After upgrading to ios6 my iphone will not open .xls files in emails with the default viewer. Is there a fix for this? The same emailed .xls files still open on my ipad using ios5 while viewing email like they did on my iphone prior to upgrading.

    After upgrading to ios6 my iphone will not open .xls files in emails with the default viewer. Is there a fix for this? The same emailed .xls files still open on my ipad using ios5 while viewing email like they did on my iphone prior to upgrading. I have no special software like numbers or anything else installed on either device. Just using the default viewer provided by apple for viewing email.

    The attachment is an .xls excel 97-2003 spreadsheet. I viewed the file in the email and did not edit it with any software. I can forward the file to anyone that is may want to check it out to see if they can help me. I was wondering if there was some way of forcing another ios6 install on my phone and maybe that would solve it.
    Is there anyone out there that is viewing .xls files in email using ios6 w/o any other software installed like numbers or any other add ons? I am not upgrading my ipad from ios5 to ios6 so I can still continue to view the emails on my ipad. Is there an email viewer .xls plug-in that will be availablle in the next ios6 update?

  • I have the latest itunes and I use Windows and suddenly after working fine for years, itunes will not synch with OUtlook anymore. Any ideas?

    I have the latest itunes and I use Windows and suddenly, after working fine for years, itunes will not synch with Outlook anymore. Any ideas?

    Contact NIK for updated/upgraded versions of their plug-ins.  They have been having a lot of issues with their plug-ins.

  • TS2998 After upgrading to Snow Leopard, Mail will not let me archive any mail. All archived messages re-appear in my inbox (I have tried archiving and placing in the trash bin).

    After upgrading to Snow Leopard, Mail will not let me archive any mail. All archived messages re-appear in my inbox (I have tried archiving and placing in the trash bin). How do i regain control of my inbox?

    The main differences that can cause a problem are scripting additions (64-bit vs 32-bit and security reasons) and the usage of dates (it is not as forgiving). AppleScript itself is basically the same, so if empty paragraphs are what caused your problems the update would have just been a coincidence.

  • HT1414 After a restore, the iOS device did not restarts. what is next step?

    After a restore, the iOS device did not restarts. what is next step?

    Try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. This can take up to 20 seconds to react.

  • Driver for Mobile device will not install with installer

    Uninstalled EVERYTHING to do with iTunes/Apple/updater. Reinstalled several times and the mobile device will not install.
    I WANT MY MONEY BACK. I HAVE NO PHONE SERVICE.

    Hi jngs & amyjo - have u sorted problem? I'm having exactly the same problem with my nano.During first installation of software, would not recognise new hardware when connecting ipod to the pc for formatting. I've uninstalled and reinstalled using both CD that come with nano and also latest software update available on itunes...but still will not recognise hardware when nano connected to pc. Have tried with several 2.0 ports - these r all ok cause i've connected other devices to them and they work fine. I've tried connecting nano to a friend's pc - he all ready uses a ipod (not nano) - same problem "does not recognise new hardware". The usb lead is fine as the nano charges when connected to port. Am planning to take nano back to Apple store in Blue Water (outside London) nxt wk. Why is it that things don't work even when you follow instructions to the letter!!!

  • After Upgrade to latest iTunes, it will not open.Uninstall and reinstall did not help Getting this error message ''  Runtime Error R6034 '' An application has made an attempt to load the C runtime library incorrectly''. 3 windows PCs.1 vista, 2 windows7 7

        I upgraded to the latest iTunes 11.1.4, after a prompt from the iTunes store. But will not open after the upgrade. One of three error messages told me to reinstall. I did. Restarted and scanned.  But no help there. So I unistalled and re installed from Apples' website. The installation was okay as usual but still will not open. Keep getting the same error messages. '' Runtime Error R6034, ''  '' An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information.''  That's the error messages I get when I try to open the New installed iTunes 11.1.4. Right now there is no iTunes on any of my PCs. Installed but will not open. Please Help.Thanks.
    Jonas.
    3 Windows PCs. Safari 5.1.5 ( One Laptop with Vista. Two Windows 7 64 bit on All in One Sony desktop PCs. )

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • After upgrading to 6.0 firefox will not open ant websites at all, while my other browsers work correctly: help, please

    i run windows 7 on a sony y series. before upgrading to 6.0 firefox worked seamlessly. now it will not open any websites at all. i have uninstalled and reinstalled it to no avail. thoughts? help? ...

    I will be using IE9 until this is fixed. Perhaps for good!!

  • After upgrade to mavericks usb devices are not recognised?

    After upgrade from Mountain Lion 10.8.2 to Mavericks external USB speakers do not work and HP Inkjet USB printer is not recognised in control panel.
    Pls advise on fault finding solutions
    Best regards
    Sergey

    Back up all data.
    In the iCloud preference pane, uncheck the box marked Calendars & Reminders if it's checked. You may get an alert that one or more calendars will be deleted from your computer. Confirm. The calendars won't be deleted from iCloud. Leave the preference pane open.
    Quit Reminders if it's running, and also quit Calendar or iCal.
    Triple-click the line below on this page to select it:  
    ~/Library/Calendars/Calendar Cache  
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a file named "Calendar Cache" selected.
    Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
    If you unchecked the box in the iCloud preference pane, check it again and close the preference pane.
    Launch Reminders and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • After upgrade, my external hard drive will not back up

    I upgraded to Mavericks.
    I use a WD elements External hard drive for Time Machine. Since upgrade, it will not back up.  I begin the process and the back up just hangs up. It says, preparing for back up.  I have let it run for hours, and nothing occurs.

    I just purchased 2 external hardrives. a LaCie Minimus and a G Drive. Each 1 TB. The guy at Apple told me that would provide 2 good TM backups for me. My internal HD has 750 GB capacity, of which I'm using 700 GB. Perhaps the ratio is not great enough. I do wish they would have told me this before I purchased the two Bummmmer! I even had them format and get the first back-ups going because of issues I've had in the past. I also just bought a 750 GB for photos.
    So, I won't be able to buy another bigger external since I've just purchased 3. Ugh. Well, I'll just exclude some files and divide things up. Eventually, I just want my 20,000 iphotos on one of the 1TB externals, and a TM back-up on another so that iphoto will function once more. It really hates how many photos I have and is brutally punishing me for it.I seriously need to do some housecleaning!
    Thanks for the advice. Just moved from US to Australia last week and was hoping to upload a few photos and the domino effect has lead me to this. Just went to Genius Bar in Perth today and they told me how to reformat drive to transfer iphoto library over, but I got stuck at trying to back-up my TM.

  • I upgraded iPhoto after upgrading to maverick. It will not open.

    Does anyone know what to do to get iPhoto's to owrk after upgrading?

    Not unless you give us some information. What happens? What error message do you? What version did you have? Do you have version 9.5 now?
    LN

  • After Upgrading to new version Firefox will not open at all

    I am running Windows 7 - 64 bit version. Firefox prompted me to upgrade to the new version, which I did. It downloaded straightaway but after I installed it the programme does not appear on screen at all. This hapenned several weeks ago so I uninstalled it and went back to an earlier version. Now I cannot work out how to do this again, so I am stuck without Firefox altogether.

    I would be interested if you or someone else can tell me what the '''IEMB3''' in your User Agent string is.
    If you get to the stage where Fx 6 seems to be installed, try starting it in Firefox Safe Mode - hold down the Shift Key as you double click on the Firefox icon>ignore the page that opens>Continue. If the browser opens O.K. you need to do some Troubleshooting - in Default theme -
    https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes

  • After upgrade to 3.6.8 will not add new bookmarks.

    I have tried all of the fixes on the site but none worked. Still will not add new bookmarks. Windows XP Pro.

    It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
    If you need support for one of your add-ons, you'll have to contact its author.
    If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

  • 975X Platinum PowerUp - Windows will not Restart - only shutdown

    I've had a MSI 975x Platinum Powerup for several weeks now and have a really annoying problem.
    When booted and in Windows the system is pretty stable. I've even had some success at overclocking (up to 333 with an E6400). However, even when not overclocked it I select Windows Restart the machine will shutdown but will not POST on the restart. The machine just sits there with no video signal.
    however if I do Windows Shutdown and the physically power the machine back on, everything seems okay.
    This maybe isnt a big deal, but is very irritating. I've seen some passing reference to other members of the forums that have a similar sounding problem, but there are no details.
    Could anyone tell me if this is a known issue, and whether there is a solution or not.
    Is it the case that only some people have this problem or do all 975x users have it?
    I've tried MSI support who just responded with a generic 'have you checked x,y,z' message.
    have detailed some of the other components of my machine below - let me know if you need anything more
    Thanks in advance,
    James.
    BIOS: 7.3 (7.1 and 7.2 had the same problem also)
    VGA Type:MSI GeForce 7900 GTO SILENT 512MB
    CPU Type:E6400
    Memory Type:GeIL 2GB (2x1GB) PC6400 800MHz Ultra Low Latency DDR2 Dual Channel Kit
    Power Supply Type:650W XCLIO X14 PSU
    Operating System:Windows XP professional

    Hi, The only thing I need to change in the bios is to turn off 'spread spectrum' and run the memory @2.2v. I have found turning off speedstep and C1E made no difference for me. At 375 if you run the memory with the 1:1 divider it will be running @750 so you can manually select 4,4,4,12 for the memory timings. This will not help the restart problem though.
    Having said that, any bios after 7.2 will alter your manual memory settings and if you enter the above ( GeILs recommended settings) it will change them to 4,5,6,12.......... Another bios quirk I'm afraid!
    To get around this you can go back to bios 7.1 which leaves these settings alone. What I have found works well is to leave the divider option on 'AUTO' . This applies the 1:1.25 ratio, and leaves memory timings on 4,4,4,12 with the ram running @875 when on 350 FSB. I run this setting @ 375, but I put the memory timings on 'SPD' as the ram is then running @938. You can run up to 2.3v through this ram according to OCUK where I bought the memory which may help you get up to these speeds or tighten the timings a bit.
    380 is about the fastsest mine will boot at and adding more vcore (up to 1.4v) made no difference to this. I have tried upping the pcie voltage (which is the chipset voltage on this board) to 1.6v, but this didn't help either! Some people seem to get over 400FSB easily and others seem to have hit the same wall as me. People who can attain the high FSB speeds don't seem to suffer from the restart problems either! WEIRD!!
    Let us know how how you get on.

  • Will not Power-on; Blinking Red D55 (DS5?) light; pulsating fan

    G4 unexpectedly powered off; will not power on. No response when pushing power on button.
    Observe blinking D55 light and fan pulsating in time with light.
    I tried taking out the battery (replaced it as the battery tested bad) and resetting the pmu.
    Any diagnosis from these symptoms to help revive my baby?
    Thanks,
    dlb

    Hello! I think I'd be concerned that the power supply has a problem. The blinking light may be pulling enough voltage to cause the fan to pulsate. Tom

Maybe you are looking for